当前位置: 首页>>代码示例>>C++>>正文


C++ TerminatorInst::replaceUsesOfWith方法代码示例

本文整理汇总了C++中TerminatorInst::replaceUsesOfWith方法的典型用法代码示例。如果您正苦于以下问题:C++ TerminatorInst::replaceUsesOfWith方法的具体用法?C++ TerminatorInst::replaceUsesOfWith怎么用?C++ TerminatorInst::replaceUsesOfWith使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在TerminatorInst的用法示例。


在下文中一共展示了TerminatorInst::replaceUsesOfWith方法的3个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: severSplitPHINodes

/// severSplitPHINodes - If a PHI node has multiple inputs from outside of the
/// region, we need to split the entry block of the region so that the PHI node
/// is easier to deal with.
void CodeExtractor::severSplitPHINodes(BasicBlock *&Header) {
  unsigned NumPredsFromRegion = 0;
  unsigned NumPredsOutsideRegion = 0;

  if (Header != &Header->getParent()->getEntryBlock()) {
    PHINode *PN = dyn_cast<PHINode>(Header->begin());
    if (!PN) return;  // No PHI nodes.

    // If the header node contains any PHI nodes, check to see if there is more
    // than one entry from outside the region.  If so, we need to sever the
    // header block into two.
    for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
      if (Blocks.count(PN->getIncomingBlock(i)))
        ++NumPredsFromRegion;
      else
        ++NumPredsOutsideRegion;

    // If there is one (or fewer) predecessor from outside the region, we don't
    // need to do anything special.
    if (NumPredsOutsideRegion <= 1) return;
  }

  // Otherwise, we need to split the header block into two pieces: one
  // containing PHI nodes merging values from outside of the region, and a
  // second that contains all of the code for the block and merges back any
  // incoming values from inside of the region.
  BasicBlock *NewBB = llvm::SplitBlock(Header, Header->getFirstNonPHI(), DT);

  // We only want to code extract the second block now, and it becomes the new
  // header of the region.
  BasicBlock *OldPred = Header;
  Blocks.remove(OldPred);
  Blocks.insert(NewBB);
  Header = NewBB;

  // Okay, now we need to adjust the PHI nodes and any branches from within the
  // region to go to the new header block instead of the old header block.
  if (NumPredsFromRegion) {
    PHINode *PN = cast<PHINode>(OldPred->begin());
    // Loop over all of the predecessors of OldPred that are in the region,
    // changing them to branch to NewBB instead.
    for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
      if (Blocks.count(PN->getIncomingBlock(i))) {
        TerminatorInst *TI = PN->getIncomingBlock(i)->getTerminator();
        TI->replaceUsesOfWith(OldPred, NewBB);
      }

    // Okay, everything within the region is now branching to the right block, we
    // just have to update the PHI nodes now, inserting PHI nodes into NewBB.
    BasicBlock::iterator AfterPHIs;
    for (AfterPHIs = OldPred->begin(); isa<PHINode>(AfterPHIs); ++AfterPHIs) {
      PHINode *PN = cast<PHINode>(AfterPHIs);
      // Create a new PHI node in the new region, which has an incoming value
      // from OldPred of PN.
      PHINode *NewPN = PHINode::Create(PN->getType(), 1 + NumPredsFromRegion,
                                       PN->getName() + ".ce", &NewBB->front());
      PN->replaceAllUsesWith(NewPN);
      NewPN->addIncoming(PN, OldPred);

      // Loop over all of the incoming value in PN, moving them to NewPN if they
      // are from the extracted region.
      for (unsigned i = 0; i != PN->getNumIncomingValues(); ++i) {
        if (Blocks.count(PN->getIncomingBlock(i))) {
          NewPN->addIncoming(PN->getIncomingValue(i), PN->getIncomingBlock(i));
          PN->removeIncomingValue(i);
          --i;
        }
      }
    }
  }
}
开发者ID:ralic,项目名称:llvm,代码行数:74,代码来源:CodeExtractor.cpp

示例2: runOnLoop

/// runOnLoop - Remove dead loops, by which we mean loops that do not impact the
/// observable behavior of the program other than finite running time.  Note
/// we do ensure that this never remove a loop that might be infinite, as doing
/// so could change the halting/non-halting nature of a program.
/// NOTE: This entire process relies pretty heavily on LoopSimplify and LCSSA
/// in order to make various safety checks work.
bool LoopDeletion::runOnLoop(Loop *L, LPPassManager &LPM) {
  // We can only remove the loop if there is a preheader that we can
  // branch from after removing it.
  BasicBlock *preheader = L->getLoopPreheader();
  if (!preheader)
    return false;

  // If LoopSimplify form is not available, stay out of trouble.
  if (!L->hasDedicatedExits())
    return false;

  // We can't remove loops that contain subloops.  If the subloops were dead,
  // they would already have been removed in earlier executions of this pass.
  if (L->begin() != L->end())
    return false;

  SmallVector<BasicBlock*, 4> exitingBlocks;
  L->getExitingBlocks(exitingBlocks);

  SmallVector<BasicBlock*, 4> exitBlocks;
  L->getUniqueExitBlocks(exitBlocks);

  // We require that the loop only have a single exit block.  Otherwise, we'd
  // be in the situation of needing to be able to solve statically which exit
  // block will be branched to, or trying to preserve the branching logic in
  // a loop invariant manner.
  if (exitBlocks.size() != 1)
    return false;

  // Finally, we have to check that the loop really is dead.
  bool Changed = false;
  if (!isLoopDead(L, exitingBlocks, exitBlocks, Changed, preheader))
    return Changed;

  // Don't remove loops for which we can't solve the trip count.
  // They could be infinite, in which case we'd be changing program behavior.
  ScalarEvolution &SE = getAnalysis<ScalarEvolution>();
  const SCEV *S = SE.getMaxBackedgeTakenCount(L);
  if (isa<SCEVCouldNotCompute>(S))
    return Changed;

  // Now that we know the removal is safe, remove the loop by changing the
  // branch from the preheader to go to the single exit block.
  BasicBlock *exitBlock = exitBlocks[0];

  // Because we're deleting a large chunk of code at once, the sequence in which
  // we remove things is very important to avoid invalidation issues.  Don't
  // mess with this unless you have good reason and know what you're doing.

  // Tell ScalarEvolution that the loop is deleted. Do this before
  // deleting the loop so that ScalarEvolution can look at the loop
  // to determine what it needs to clean up.
  SE.forgetLoop(L);

  // Connect the preheader directly to the exit block.
  TerminatorInst *TI = preheader->getTerminator();
  TI->replaceUsesOfWith(L->getHeader(), exitBlock);

  // Rewrite phis in the exit block to get their inputs from
  // the preheader instead of the exiting block.
  BasicBlock *exitingBlock = exitingBlocks[0];
  BasicBlock::iterator BI = exitBlock->begin();
  while (PHINode *P = dyn_cast<PHINode>(BI)) {
    int j = P->getBasicBlockIndex(exitingBlock);
    assert(j >= 0 && "Can't find exiting block in exit block's phi node!");
    P->setIncomingBlock(j, preheader);
    for (unsigned i = 1; i < exitingBlocks.size(); ++i)
      P->removeIncomingValue(exitingBlocks[i]);
    ++BI;
  }

  // Update the dominator tree and remove the instructions and blocks that will
  // be deleted from the reference counting scheme.
  DominatorTree &DT = getAnalysis<DominatorTree>();
  SmallVector<DomTreeNode*, 8> ChildNodes;
  for (Loop::block_iterator LI = L->block_begin(), LE = L->block_end();
       LI != LE; ++LI) {
    // Move all of the block's children to be children of the preheader, which
    // allows us to remove the domtree entry for the block.
    ChildNodes.insert(ChildNodes.begin(), DT[*LI]->begin(), DT[*LI]->end());
    for (SmallVectorImpl<DomTreeNode *>::iterator DI = ChildNodes.begin(),
         DE = ChildNodes.end(); DI != DE; ++DI) {
      DT.changeImmediateDominator(*DI, DT[preheader]);
    }

    ChildNodes.clear();
    DT.eraseNode(*LI);

    // Remove the block from the reference counting scheme, so that we can
    // delete it freely later.
    (*LI)->dropAllReferences();
  }

  // Erase the instructions and the blocks without having to worry
//.........这里部分代码省略.........
开发者ID:vicioushg,项目名称:llvm,代码行数:101,代码来源:LoopDeletion.cpp

示例3: findInputsOutputs

void RegionExtractor::findInputsOutputs(ValueSet &Inputs,
                                      ValueSet &Outputs) const {
  for (SetVector<BasicBlock *>::const_iterator I = Blocks.begin(),
                                               E = Blocks.end();
       I != E; ++I) {
    BasicBlock *BB = *I;

    // If a used value is defined outside the region, it's an input.  If an
    // instruction is used outside the region, it's an output.
    for (BasicBlock::iterator II = BB->begin(), IE = BB->end();
         II != IE; ++II) {
      for (User::op_iterator OI = II->op_begin(), OE = II->op_end();
           OI != OE; ++OI)
        if (definedInCaller(Blocks, *OI))
          Inputs.insert(*OI);
#if LLVM_VERSION_MINOR == 5
      for (User *U : II->users())
        if (!definedInRegion(Blocks, U)) {
#else
      for (Value::use_iterator UI = II->use_begin(), UE = II->use_end();
           UI != UE; ++UI)
        if (!definedInRegion(Blocks, *UI)) {
#endif
          Outputs.insert(II);
          break;
        }
    }
  }
}

/// severSplitPHINodes - If a PHI node has multiple inputs from outside of the
/// region, we need to split the entry block of the region so that the PHI node
/// is easier to deal with.
void RegionExtractor::severSplitPHINodes(BasicBlock *&Header) {
  unsigned NumPredsFromRegion = 0;
  unsigned NumPredsOutsideRegion = 0;

  if (Header != &Header->getParent()->getEntryBlock()) {
    PHINode *PN = dyn_cast<PHINode>(Header->begin());
    if (!PN) return; // No PHI nodes.

    // If the header node contains any PHI nodes, check to see if there is more
    // than one entry from outside the region.  If so, we need to sever the
    // header block into two.
    for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
      if (Blocks.count(PN->getIncomingBlock(i)))
        ++NumPredsFromRegion;
      else
        ++NumPredsOutsideRegion;

    // If there is one (or fewer) predecessor from outside the region, we don't
    // need to do anything special.
    if (NumPredsOutsideRegion <= 1) return;
  }

  // Otherwise, we need to split the header block into two pieces: one
  // containing PHI nodes merging values from outside of the region, and a
  // second that contains all of the code for the block and merges back any
  // incoming values from inside of the region.
  BasicBlock::iterator AfterPHIs = Header->getFirstNonPHI();
  BasicBlock *NewBB = Header->splitBasicBlock(AfterPHIs,
                                              Header->getName()+".ce");

  // We only want to code extract the second block now, and it becomes the new
  // header of the region.
  BasicBlock *OldPred = Header;
  Blocks.remove(OldPred);
  Blocks.insert(NewBB);
  Header = NewBB;

  // Okay, update dominator sets. The blocks that dominate the new one are the
  // blocks that dominate TIBB plus the new block itself.
  if (DT)
    DT->splitBlock(NewBB);

  // Okay, now we need to adjust the PHI nodes and any branches from within the
  // region to go to the new header block instead of the old header block.
  if (NumPredsFromRegion) {
    PHINode *PN = cast<PHINode>(OldPred->begin());
    // Loop over all of the predecessors of OldPred that are in the region,
    // changing them to branch to NewBB instead.
    for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
      if (Blocks.count(PN->getIncomingBlock(i))) {
        TerminatorInst *TI = PN->getIncomingBlock(i)->getTerminator();
        TI->replaceUsesOfWith(OldPred, NewBB);
      }

    // Okay, everything within the region is now branching to the right block, we
    // just have to update the PHI nodes now, inserting PHI nodes into NewBB.
    for (AfterPHIs = OldPred->begin(); isa<PHINode>(AfterPHIs); ++AfterPHIs) {
      PHINode *PN = cast<PHINode>(AfterPHIs);
      // Create a new PHI node in the new region, which has an incoming value
      // from OldPred of PN.
      PHINode *NewPN = PHINode::Create(PN->getType(), 1 + NumPredsFromRegion,
                                       PN->getName()+".ce", NewBB->begin());
      NewPN->addIncoming(PN, OldPred);

      // Loop over all of the incoming value in PN, moving them to NewPN if they
      // are from the extracted region.
      for (unsigned i = 0; i != PN->getNumIncomingValues(); ++i) {
//.........这里部分代码省略.........
开发者ID:Chadi-akel,项目名称:cere,代码行数:101,代码来源:RegionExtractor.cpp


注:本文中的TerminatorInst::replaceUsesOfWith方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。