本文整理汇总了C++中SkOpSegment::markAndChaseWinding方法的典型用法代码示例。如果您正苦于以下问题：C++ SkOpSegment::markAndChaseWinding方法的具体用法？C++ SkOpSegment::markAndChaseWinding怎么用？C++ SkOpSegment::markAndChaseWinding使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类SkOpSegment的用法示例。
在下文中一共展示了SkOpSegment::markAndChaseWinding方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: FindChase
SkOpSegment* FindChase(SkTDArray<SkOpSpan*>* chase, int* tIndex, int* endIndex) {
while (chase->count()) {
SkOpSpan* span;
chase->pop(&span);
const SkOpSpan& backPtr = span->fOther->span(span->fOtherIndex);
SkOpSegment* segment = backPtr.fOther;
*tIndex = backPtr.fOtherIndex;
bool sortable = true;
bool done = true;
*endIndex = -1;
if (const SkOpAngle* last = segment->activeAngle(*tIndex, tIndex, endIndex, &done,
&sortable)) {
*tIndex = last->start();
*endIndex = last->end();
#if TRY_ROTATE
*chase->insert(0) = span;
#else
*chase->append() = span;
#endif
return last->segment();
}
if (done) {
continue;
}
if (!sortable) {
continue;
}
// find first angle, initialize winding to computed fWindSum
const SkOpAngle* angle = segment->spanToAngle(*tIndex, *endIndex);
const SkOpAngle* firstAngle;
SkDEBUGCODE(firstAngle = angle);
SkDEBUGCODE(bool loop = false);
int winding;
do {
angle = angle->next();
SkASSERT(angle != firstAngle || !loop);
SkDEBUGCODE(loop |= angle == firstAngle);
segment = angle->segment();
winding = segment->windSum(angle);
} while (winding == SK_MinS32);
int spanWinding = segment->spanSign(angle->start(), angle->end());
#if DEBUG_WINDING
SkDebugf("%s winding=%d spanWinding=%d\n", __FUNCTION__, winding, spanWinding);
#endif
// turn span winding into contour winding
if (spanWinding * winding < 0) {
winding += spanWinding;
}
// we care about first sign and whether wind sum indicates this
// edge is inside or outside. Maybe need to pass span winding
// or first winding or something into this function?
// advance to first undone angle, then return it and winding
// (to set whether edges are active or not)
firstAngle = angle;
winding -= firstAngle->segment()->spanSign(firstAngle);
while ((angle = angle->next()) != firstAngle) {
segment = angle->segment();
int maxWinding = winding;
winding -= segment->spanSign(angle);
#if DEBUG_SORT
SkDebugf("%s id=%d maxWinding=%d winding=%d sign=%d\n", __FUNCTION__,
segment->debugID(), maxWinding, winding, angle->sign());
#endif
*tIndex = angle->start();
*endIndex = angle->end();
int lesser = SkMin32(*tIndex, *endIndex);
const SkOpSpan& nextSpan = segment->span(lesser);
if (!nextSpan.fDone) {
// FIXME: this be wrong? assign startWinding if edge is in
// same direction. If the direction is opposite, winding to
// assign is flipped sign or +/- 1?
if (SkOpSegment::UseInnerWinding(maxWinding, winding)) {
maxWinding = winding;
}
(void) segment->markAndChaseWinding(angle, maxWinding, 0);
break;
}
}
*chase->insert(0) = span;
return segment;
}
return NULL;
}示例2: FindChase
SkOpSegment* FindChase(SkTDArray<SkOpSpan*>& chase, int& tIndex, int& endIndex) {
while (chase.count()) {
SkOpSpan* span;
chase.pop(&span);
const SkOpSpan& backPtr = span->fOther->span(span->fOtherIndex);
SkOpSegment* segment = backPtr.fOther;
tIndex = backPtr.fOtherIndex;
SkSTArray<SkOpAngle::kStackBasedCount, SkOpAngle, true> angles;
int done = 0;
if (segment->activeAngle(tIndex, &done, &angles)) {
SkOpAngle* last = angles.end() - 1;
tIndex = last->start();
endIndex = last->end();
#if TRY_ROTATE
*chase.insert(0) = span;
#else
*chase.append() = span;
#endif
return last->segment();
}
if (done == angles.count()) {
continue;
}
SkSTArray<SkOpAngle::kStackBasedCount, SkOpAngle*, true> sorted;
bool sortable = SkOpSegment::SortAngles(angles, &sorted,
SkOpSegment::kMayBeUnordered_SortAngleKind);
int angleCount = sorted.count();
#if DEBUG_SORT
sorted[0]->segment()->debugShowSort(__FUNCTION__, sorted, 0, 0, 0);
#endif
if (!sortable) {
continue;
}
// find first angle, initialize winding to computed fWindSum
int firstIndex = -1;
const SkOpAngle* angle;
int winding;
do {
angle = sorted[++firstIndex];
segment = angle->segment();
winding = segment->windSum(angle);
} while (winding == SK_MinS32);
int spanWinding = segment->spanSign(angle->start(), angle->end());
#if DEBUG_WINDING
SkDebugf("%s winding=%d spanWinding=%d\n",
__FUNCTION__, winding, spanWinding);
#endif
// turn span winding into contour winding
if (spanWinding * winding < 0) {
winding += spanWinding;
}
#if DEBUG_SORT
segment->debugShowSort(__FUNCTION__, sorted, firstIndex, winding, 0);
#endif
// we care about first sign and whether wind sum indicates this
// edge is inside or outside. Maybe need to pass span winding
// or first winding or something into this function?
// advance to first undone angle, then return it and winding
// (to set whether edges are active or not)
int nextIndex = firstIndex + 1;
int lastIndex = firstIndex != 0 ? firstIndex : angleCount;
angle = sorted[firstIndex];
winding -= angle->segment()->spanSign(angle);
do {
SkASSERT(nextIndex != firstIndex);
if (nextIndex == angleCount) {
nextIndex = 0;
}
angle = sorted[nextIndex];
segment = angle->segment();
int maxWinding = winding;
winding -= segment->spanSign(angle);
#if DEBUG_SORT
SkDebugf("%s id=%d maxWinding=%d winding=%d sign=%d\n", __FUNCTION__,
segment->debugID(), maxWinding, winding, angle->sign());
#endif
tIndex = angle->start();
endIndex = angle->end();
int lesser = SkMin32(tIndex, endIndex);
const SkOpSpan& nextSpan = segment->span(lesser);
if (!nextSpan.fDone) {
// FIXME: this be wrong? assign startWinding if edge is in
// same direction. If the direction is opposite, winding to
// assign is flipped sign or +/- 1?
if (SkOpSegment::UseInnerWinding(maxWinding, winding)) {
maxWinding = winding;
}
segment->markAndChaseWinding(angle, maxWinding, 0);
break;
}
} while (++nextIndex != lastIndex);
*chase.insert(0) = span;
return segment;
}
return NULL;
}