C++ QSGGeometry::indexCount方法代码示例

void Renderer::buildRenderList(QSGNode *node, QSGClipNode *clip)
{
    if (node->isSubtreeBlocked())
        return;

    if (node->type() == QSGNode::GeometryNodeType || node->type() == QSGNode::ClipNodeType) {
        QSGBasicGeometryNode *gn = static_cast<QSGBasicGeometryNode *>(node);
        QSGGeometry *g = gn->geometry();

        Element e;
        e.node = gn;

        if (g->vertexCount() > 0) {
            e.vboOffset = m_vboSize;
            int vertexSize = g->sizeOfVertex() * g->vertexCount();
            m_vboSize += vertexSize;
            m_vboData.resize(m_vboSize);
            memcpy(m_vboData.data() + e.vboOffset, g->vertexData(), vertexSize);
        } else {
            e.vboOffset = -1;
        }

        if (g->indexCount() > 0) {
            e.iboOffset = m_iboSize;
            int indexSize = g->sizeOfIndex() * g->indexCount();
            m_iboSize += indexSize;
            m_iboData.resize(m_iboSize);
            memcpy(m_iboData.data() + e.iboOffset, g->indexData(), indexSize);
        } else {
            e.iboOffset = -1;
        }

        m_renderList.add(e);

        static_cast<BasicGeometryNode_Accessor *>(node)->m_clip_list = clip;
        if (node->type() == QSGNode::ClipNodeType)
            clip = static_cast<QSGClipNode *>(node);
    }

    QSGNODE_TRAVERSE(node)
    buildRenderList(child, clip);
}

void QQuickShapeGenericRenderer::updateStrokeNode(ShapePathData *d, QQuickShapeGenericNode *node)
{
    if (!node->m_strokeNode)
        return;
    if (!(d->effectiveDirty & (DirtyStrokeGeom | DirtyColor)))
        return;

    QQuickShapeGenericStrokeFillNode *n = node->m_strokeNode;
    QSGGeometry *g = n->geometry();
    if (d->strokeVertices.isEmpty()) {
        if (g->vertexCount() || g->indexCount()) {
            g->allocate(0, 0);
            n->markDirty(QSGNode::DirtyGeometry);
        }
        return;
    }

    n->markDirty(QSGNode::DirtyGeometry);

    // Async loading runs update once, bails out above, then updates again once
    // ready. Set the material dirty then. This is in-line with fill where the
    // first activateMaterial() achieves the same.
    if (!g->vertexCount())
        n->markDirty(QSGNode::DirtyMaterial);

    if ((d->effectiveDirty & DirtyColor) && !(d->effectiveDirty & DirtyStrokeGeom)) {
        ColoredVertex *vdst = reinterpret_cast<ColoredVertex *>(g->vertexData());
        for (int i = 0; i < g->vertexCount(); ++i)
            vdst[i].set(vdst[i].x, vdst[i].y, d->strokeColor);
        return;
    }

    g->allocate(d->strokeVertices.count(), 0);
    g->setDrawingMode(QSGGeometry::DrawTriangleStrip);
    memcpy(g->vertexData(), d->strokeVertices.constData(), g->vertexCount() * g->sizeOfVertex());
}

void QSGDefaultImageNode::updateGeometry()
{
    Q_ASSERT(!m_targetRect.isEmpty());
    const QSGTexture *t = m_material.texture();
    if (!t) {
        QSGGeometry *g = geometry();
        g->allocate(4);
        g->setDrawingMode(GL_TRIANGLE_STRIP);
        memset(g->vertexData(), 0, g->sizeOfVertex() * 4);
    } else {
        QRectF sourceRect = t->normalizedTextureSubRect();

        QRectF innerSourceRect(sourceRect.x() + m_innerSourceRect.x() * sourceRect.width(),
                               sourceRect.y() + m_innerSourceRect.y() * sourceRect.height(),
                               m_innerSourceRect.width() * sourceRect.width(),
                               m_innerSourceRect.height() * sourceRect.height());

        bool hasMargins = m_targetRect != m_innerTargetRect;

        int floorLeft = qFloor(m_subSourceRect.left());
        int ceilRight = qCeil(m_subSourceRect.right());
        int floorTop = qFloor(m_subSourceRect.top());
        int ceilBottom = qCeil(m_subSourceRect.bottom());
        int hTiles = ceilRight - floorLeft;
        int vTiles = ceilBottom - floorTop;

        bool hasTiles = hTiles != 1 || vTiles != 1;
        bool fullTexture = innerSourceRect == QRectF(0, 0, 1, 1);

#ifdef QT_OPENGL_ES_2
        QOpenGLContext *ctx = QOpenGLContext::currentContext();
        bool npotSupported = ctx->functions()->hasOpenGLFeature(QOpenGLFunctions::NPOTTextureRepeat);
        QSize size = t->textureSize();
        bool isNpot = !isPowerOfTwo(size.width()) || !isPowerOfTwo(size.height());
        bool wrapSupported = npotSupported || !isNpot;
#else
        bool wrapSupported = true;
#endif

        // An image can be rendered as a single quad if:
        // - There are no margins, and either:
        //   - the image isn't repeated
        //   - the source rectangle fills the entire texture so that texture wrapping can be used,
        //     and NPOT is supported
        if (!hasMargins && (!hasTiles || (fullTexture && wrapSupported))) {
            QRectF sr;
            if (!fullTexture) {
                sr = QRectF(innerSourceRect.x() + (m_subSourceRect.left() - floorLeft) * innerSourceRect.width(),
                            innerSourceRect.y() + (m_subSourceRect.top() - floorTop) * innerSourceRect.height(),
                            m_subSourceRect.width() * innerSourceRect.width(),
                            m_subSourceRect.height() * innerSourceRect.height());
            } else {
                sr = QRectF(m_subSourceRect.left() - floorLeft, m_subSourceRect.top() - floorTop,
                            m_subSourceRect.width(), m_subSourceRect.height());
            }
            if (m_mirror) {
                qreal oldLeft = sr.left();
                sr.setLeft(sr.right());
                sr.setRight(oldLeft);
            }

            if (m_antialiasing) {
                QSGGeometry *g = geometry();
                Q_ASSERT(g != &m_geometry);
                g->allocate(8, 14);
                g->setDrawingMode(GL_TRIANGLE_STRIP);
                SmoothVertex *vertices = reinterpret_cast<SmoothVertex *>(g->vertexData());
                float delta = float(qAbs(m_targetRect.width()) < qAbs(m_targetRect.height())
                        ? m_targetRect.width() : m_targetRect.height()) * 0.5f;
                float sx = float(sr.width() / m_targetRect.width());
                float sy = float(sr.height() / m_targetRect.height());
                for (int d = -1; d <= 1; d += 2) {
                    for (int j = 0; j < 2; ++j) {
                        for (int i = 0; i < 2; ++i, ++vertices) {
                            vertices->x = m_targetRect.x() + i * m_targetRect.width();
                            vertices->y = m_targetRect.y() + j * m_targetRect.height();
                            vertices->u = sr.x() + i * sr.width();
                            vertices->v = sr.y() + j * sr.height();
                            vertices->dx = (i == 0 ? delta : -delta) * d;
                            vertices->dy = (j == 0 ? delta : -delta) * d;
                            vertices->du = (d < 0 ? 0 : vertices->dx * sx);
                            vertices->dv = (d < 0 ? 0 : vertices->dy * sy);
                        }
                    }
                }
                Q_ASSERT(vertices - g->vertexCount() == g->vertexData());
                static const quint16 indices[] = {
                    0, 4, 1, 5, 3, 7, 2, 6, 0, 4,
                    4, 6, 5, 7
                };
                Q_ASSERT(g->sizeOfIndex() * g->indexCount() == sizeof(indices));
                memcpy(g->indexDataAsUShort(), indices, sizeof(indices));
            } else {
                m_geometry.allocate(4);
                m_geometry.setDrawingMode(GL_TRIANGLE_STRIP);
                QSGGeometry::updateTexturedRectGeometry(&m_geometry, m_targetRect, sr);
            }
        } else {
            int hCells = hTiles;
            int vCells = vTiles;
//.........这里部分代码省略.........

bool SGGeometryExtension::setObject(void* object, const QString& typeName)
{
  if (typeName == "QSGGeometryNode") {
    m_node = static_cast<QSGGeometryNode*>(object);
    m_model->setNode(m_node);

    QSGGeometry *geometry = m_node->geometry();
    emit geometryChanged(geometry->drawingMode(),
                         QByteArray::fromRawData(reinterpret_cast<char*>(geometry->indexData()), geometry->indexCount()*geometry->sizeOfIndex()),
                         geometry->indexType());
    return true;
  }
  return false;
}

void QQuickShapeGenericRenderer::updateFillNode(ShapePathData *d, QQuickShapeGenericNode *node)
{
    if (!node->m_fillNode)
        return;
    if (!(d->effectiveDirty & (DirtyFillGeom | DirtyColor | DirtyFillGradient)))
        return;

    // Make a copy of the data that will be accessed by the material on
    // the render thread. This must be done even when we bail out below.
    QQuickShapeGenericStrokeFillNode *n = node->m_fillNode;
    updateShadowDataInNode(d, n);

    QSGGeometry *g = n->geometry();
    if (d->fillVertices.isEmpty()) {
        if (g->vertexCount() || g->indexCount()) {
            g->allocate(0, 0);
            n->markDirty(QSGNode::DirtyGeometry);
        }
        return;
    }

    if (d->fillGradientActive) {
        QQuickShapeGenericStrokeFillNode::Material gradMat;
        switch (d->fillGradientActive) {
        case LinearGradient:
            gradMat = QQuickShapeGenericStrokeFillNode::MatLinearGradient;
            break;
        case RadialGradient:
            gradMat = QQuickShapeGenericStrokeFillNode::MatRadialGradient;
            break;
        case ConicalGradient:
            gradMat = QQuickShapeGenericStrokeFillNode::MatConicalGradient;
            break;
        default:
            Q_UNREACHABLE();
        }
        n->activateMaterial(m_item->window(), gradMat);
        if (d->effectiveDirty & DirtyFillGradient) {
            // Gradients are implemented via a texture-based material.
            n->markDirty(QSGNode::DirtyMaterial);
            // stop here if only the gradient changed; no need to touch the geometry
            if (!(d->effectiveDirty & DirtyFillGeom))
                return;
        }
    } else {
        n->activateMaterial(m_item->window(), QQuickShapeGenericStrokeFillNode::MatSolidColor);
        // fast path for updating only color values when no change in vertex positions
        if ((d->effectiveDirty & DirtyColor) && !(d->effectiveDirty & DirtyFillGeom)) {
            ColoredVertex *vdst = reinterpret_cast<ColoredVertex *>(g->vertexData());
            for (int i = 0; i < g->vertexCount(); ++i)
                vdst[i].set(vdst[i].x, vdst[i].y, d->fillColor);
            n->markDirty(QSGNode::DirtyGeometry);
            return;
        }
    }

    const int indexCount = d->indexType == QSGGeometry::UnsignedShortType
            ? d->fillIndices.count() * 2 : d->fillIndices.count();
    if (g->indexType() != d->indexType) {
        g = new QSGGeometry(QSGGeometry::defaultAttributes_ColoredPoint2D(),
                            d->fillVertices.count(), indexCount, d->indexType);
        n->setGeometry(g);
    } else {
        g->allocate(d->fillVertices.count(), indexCount);
    }
    g->setDrawingMode(QSGGeometry::DrawTriangles);
    memcpy(g->vertexData(), d->fillVertices.constData(), g->vertexCount() * g->sizeOfVertex());
    memcpy(g->indexData(), d->fillIndices.constData(), g->indexCount() * g->sizeOfIndex());

    n->markDirty(QSGNode::DirtyGeometry);
}