C++ PCB_PLOT_PARAMS::SetMirror方法代码示例

void DIALOG_PLOT::applyPlotSettings()
{
    REPORTER&   reporter = m_messagesPanel->Reporter();

    PCB_PLOT_PARAMS tempOptions;

    tempOptions.SetExcludeEdgeLayer( m_excludeEdgeLayerOpt->GetValue() );
    tempOptions.SetSubtractMaskFromSilk( m_subtractMaskFromSilk->GetValue() );
    tempOptions.SetPlotFrameRef( m_plotSheetRef->GetValue() );
    tempOptions.SetPlotPadsOnSilkLayer( m_plotPads_on_Silkscreen->GetValue() );
    tempOptions.SetUseAuxOrigin( m_useAuxOriginCheckBox->GetValue() );
    tempOptions.SetPlotValue( m_plotModuleValueOpt->GetValue() );
    tempOptions.SetPlotReference( m_plotModuleRefOpt->GetValue() );
    tempOptions.SetPlotInvisibleText( m_plotInvisibleText->GetValue() );
    tempOptions.SetScaleSelection( m_scaleOpt->GetSelection() );
    tempOptions.SetDrillMarksType( static_cast<PCB_PLOT_PARAMS::DrillMarksType>
                                   ( m_drillShapeOpt->GetSelection() ) );
    tempOptions.SetMirror( m_plotMirrorOpt->GetValue() );
    tempOptions.SetPlotMode( m_plotModeOpt->GetSelection() == 1 ? SKETCH : FILLED );
    tempOptions.SetPlotViaOnMaskLayer( m_plotNoViaOnMaskOpt->GetValue() );

    // Update settings from text fields. Rewrite values back to the fields,
    // since the values may have been constrained by the setters.

    // read HPLG pen size (this param is stored in mils)
    wxString    msg = m_HPGLPenSizeOpt->GetValue();
    int         tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;

    if( !tempOptions.SetHPGLPenDiameter( tmp ) )
    {
        msg = StringFromValue( g_UserUnit, tempOptions.GetHPGLPenDiameter() * IU_PER_MILS );
        m_HPGLPenSizeOpt->SetValue( msg );
        msg.Printf( _( "HPGL pen size constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    // Read HPGL pen overlay (this param is stored in mils)
    msg = m_HPGLPenOverlayOpt->GetValue();
    tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;

    if( !tempOptions.SetHPGLPenOverlay( tmp ) )
    {
        msg = StringFromValue( g_UserUnit,
                                     tempOptions.GetHPGLPenOverlay() * IU_PER_MILS );
        m_HPGLPenOverlayOpt->SetValue( msg );
        msg.Printf( _( "HPGL pen overlay constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    // Default linewidth
    msg = m_linesWidth->GetValue();
    tmp = ValueFromString( g_UserUnit, msg );

    if( !tempOptions.SetLineWidth( tmp ) )
    {
        msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
        m_linesWidth->SetValue( msg );
        msg.Printf( _( "Default line width constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    // X scale
    double tmpDouble;
    msg = m_fineAdjustXscaleOpt->GetValue();
    msg.ToDouble( &tmpDouble );

    if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
    {
        msg.Printf( wxT( "%f" ), m_XScaleAdjust );
        m_fineAdjustXscaleOpt->SetValue( msg );
        msg.Printf( _( "X scale constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );

    // Y scale
    msg = m_fineAdjustYscaleOpt->GetValue();
    msg.ToDouble( &tmpDouble );

    if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
    {
        msg.Printf( wxT( "%f" ), m_YScaleAdjust );
        m_fineAdjustYscaleOpt->SetValue( msg );
        msg.Printf( _( "Y scale constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );

    // PS Width correction
    msg = m_PSFineAdjustWidthOpt->GetValue();
    int itmp = ValueFromString( g_UserUnit, msg );

    if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
    {
        msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
        m_PSFineAdjustWidthOpt->SetValue( msg );
        msg.Printf( _( "Width correction constrained. "
                       "The reasonable width correction value must be in a range of "
//.........这里部分代码省略.........

void DIALOG_PLOT::applyPlotSettings()
{
    REPORTER&   reporter = m_messagesPanel->Reporter();

    PCB_PLOT_PARAMS tempOptions;

    tempOptions.SetExcludeEdgeLayer( m_excludeEdgeLayerOpt->GetValue() );
    tempOptions.SetSubtractMaskFromSilk( m_subtractMaskFromSilk->GetValue() );
    tempOptions.SetPlotFrameRef( m_plotSheetRef->GetValue() );
    tempOptions.SetPlotPadsOnSilkLayer( m_plotPads_on_Silkscreen->GetValue() );
    tempOptions.SetUseAuxOrigin( m_useAuxOriginCheckBox->GetValue() );
    tempOptions.SetPlotValue( m_plotModuleValueOpt->GetValue() );
    tempOptions.SetPlotReference( m_plotModuleRefOpt->GetValue() );
    tempOptions.SetPlotInvisibleText( m_plotInvisibleText->GetValue() );
    tempOptions.SetScaleSelection( m_scaleOpt->GetSelection() );
    tempOptions.SetDrillMarksType( static_cast<PCB_PLOT_PARAMS::DrillMarksType>
                                   ( m_drillShapeOpt->GetSelection() ) );
    tempOptions.SetMirror( m_plotMirrorOpt->GetValue() );
    tempOptions.SetPlotMode( m_plotModeOpt->GetSelection() == 1 ? SKETCH : FILLED );
    tempOptions.SetDXFPlotPolygonMode( m_DXF_plotModeOpt->GetValue() );
    tempOptions.SetPlotViaOnMaskLayer( m_plotNoViaOnMaskOpt->GetValue() );

    if( !m_DXF_plotTextStrokeFontOpt->IsEnabled() )     // Currently, only DXF supports this option
        tempOptions.SetTextMode( PLOTTEXTMODE_DEFAULT  );
    else
        tempOptions.SetTextMode( m_DXF_plotTextStrokeFontOpt->GetValue() ?
                                 PLOTTEXTMODE_DEFAULT : PLOTTEXTMODE_NATIVE );

    // Update settings from text fields. Rewrite values back to the fields,
    // since the values may have been constrained by the setters.

    // read HPLG pen size (this param is stored in mils)
    wxString    msg = m_HPGLPenSizeOpt->GetValue();
    int         tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;

    if( !tempOptions.SetHPGLPenDiameter( tmp ) )
    {
        msg = StringFromValue( g_UserUnit, tempOptions.GetHPGLPenDiameter() * IU_PER_MILS );
        m_HPGLPenSizeOpt->SetValue( msg );
        msg.Printf( _( "HPGL pen size constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    // Default linewidth
    msg = m_linesWidth->GetValue();
    tmp = ValueFromString( g_UserUnit, msg );

    if( !tempOptions.SetLineWidth( tmp ) )
    {
        msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
        m_linesWidth->SetValue( msg );
        msg.Printf( _( "Default line width constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    // X scale
    double tmpDouble;
    msg = m_fineAdjustXscaleOpt->GetValue();
    msg.ToDouble( &tmpDouble );

    if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
    {
        msg.Printf( wxT( "%f" ), m_XScaleAdjust );
        m_fineAdjustXscaleOpt->SetValue( msg );
        msg.Printf( _( "X scale constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );

    // Y scale
    msg = m_fineAdjustYscaleOpt->GetValue();
    msg.ToDouble( &tmpDouble );

    if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
    {
        msg.Printf( wxT( "%f" ), m_YScaleAdjust );
        m_fineAdjustYscaleOpt->SetValue( msg );
        msg.Printf( _( "Y scale constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );

    // PS Width correction
    msg = m_PSFineAdjustWidthOpt->GetValue();
    int itmp = ValueFromString( g_UserUnit, msg );

    if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
    {
        msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
        m_PSFineAdjustWidthOpt->SetValue( msg );
        msg.Printf( _( "Width correction constrained. "
                       "The reasonable width correction value must be in a range of "
                       " [%+f; %+f] (%s) for current design rules. " ),
                    To_User_Unit( g_UserUnit, m_widthAdjustMinValue ),
                    To_User_Unit( g_UserUnit, m_widthAdjustMaxValue ),
                    ( g_UserUnit == INCHES ) ? wxT( "\"" ) : wxT( "mm" ) );
        reporter.Report( msg, REPORTER::RPT_WARNING );
    }
//.........这里部分代码省略.........

/** Open a new plotfile using the options (and especially the format)
 * specified in the options and prepare the page for plotting.
 * Return the plotter object if OK, NULL if the file is not created
 * (or has a problem)
 */
PLOTTER* StartPlotBoard( BOARD *aBoard, PCB_PLOT_PARAMS *aPlotOpts,
                         const wxString& aFullFileName,
                         const wxString& aSheetDesc )
{
    // Create the plotter driver and set the few plotter specific
    // options
    PLOTTER*    plotter = NULL;

    switch( aPlotOpts->GetFormat() )
    {
    case PLOT_FORMAT_DXF:
        plotter = new DXF_PLOTTER();
        break;

    case PLOT_FORMAT_POST:
        PS_PLOTTER* PS_plotter;
        PS_plotter = new PS_PLOTTER();
        PS_plotter->SetScaleAdjust( aPlotOpts->GetFineScaleAdjustX(),
                                    aPlotOpts->GetFineScaleAdjustY() );
        plotter = PS_plotter;
        break;

    case PLOT_FORMAT_PDF:
        plotter = new PDF_PLOTTER();
        break;

    case PLOT_FORMAT_HPGL:
        HPGL_PLOTTER* HPGL_plotter;
        HPGL_plotter = new HPGL_PLOTTER();

        /* HPGL options are a little more convoluted to compute, so
           they're split in an other function */
        ConfigureHPGLPenSizes( HPGL_plotter, aPlotOpts );
        plotter = HPGL_plotter;
        break;

    case PLOT_FORMAT_GERBER:
        plotter = new GERBER_PLOTTER();
        break;

    case PLOT_FORMAT_SVG:
        plotter = new SVG_PLOTTER();
        break;

    default:
        wxASSERT( false );
        return NULL;
    }

    // Compute the viewport and set the other options

    // page layout is not mirrored, so temporary change mirror option
    // just to plot the page layout
    PCB_PLOT_PARAMS plotOpts = *aPlotOpts;

    if( plotOpts.GetPlotFrameRef() && plotOpts.GetMirror() )
        plotOpts.SetMirror( false );

    initializePlotter( plotter, aBoard, &plotOpts );

    if( plotter->OpenFile( aFullFileName ) )
    {
        plotter->StartPlot();

        // Plot the frame reference if requested
        if( aPlotOpts->GetPlotFrameRef() )
        {
            PlotWorkSheet( plotter, aBoard->GetTitleBlock(),
                           aBoard->GetPageSettings(),
                           1, 1, // Only one page
                           aSheetDesc, aBoard->GetFileName() );

            if( aPlotOpts->GetMirror() )
            initializePlotter( plotter, aBoard, aPlotOpts );
        }

        /* When plotting a negative board: draw a black rectangle
         * (background for plot board in white) and switch the current
         * color to WHITE; note the color inversion is actually done
         * in the driver (if supported) */
        if( aPlotOpts->GetNegative() )
        {
            EDA_RECT bbox = aBoard->ComputeBoundingBox();
            FillNegativeKnockout( plotter, bbox );
        }

        return plotter;
    }

    delete plotter;
    return NULL;
}