C++ PCB_PLOT_PARAMS::SetExcludeEdgeLayer方法代码示例

本文整理汇总了C++中PCB_PLOT_PARAMS::SetExcludeEdgeLayer方法的典型用法代码示例。如果您正苦于以下问题：C++ PCB_PLOT_PARAMS::SetExcludeEdgeLayer方法的具体用法？C++ PCB_PLOT_PARAMS::SetExcludeEdgeLayer怎么用？C++ PCB_PLOT_PARAMS::SetExcludeEdgeLayer使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类PCB_PLOT_PARAMS的用法示例。

在下文中一共展示了PCB_PLOT_PARAMS::SetExcludeEdgeLayer方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: applyPlotSettings

void DIALOG_PLOT::applyPlotSettings()
{
    REPORTER&   reporter = m_messagesPanel->Reporter();

    PCB_PLOT_PARAMS tempOptions;

    tempOptions.SetExcludeEdgeLayer( m_excludeEdgeLayerOpt->GetValue() );
    tempOptions.SetSubtractMaskFromSilk( m_subtractMaskFromSilk->GetValue() );
    tempOptions.SetPlotFrameRef( m_plotSheetRef->GetValue() );
    tempOptions.SetPlotPadsOnSilkLayer( m_plotPads_on_Silkscreen->GetValue() );
    tempOptions.SetUseAuxOrigin( m_useAuxOriginCheckBox->GetValue() );
    tempOptions.SetPlotValue( m_plotModuleValueOpt->GetValue() );
    tempOptions.SetPlotReference( m_plotModuleRefOpt->GetValue() );
    tempOptions.SetPlotInvisibleText( m_plotInvisibleText->GetValue() );
    tempOptions.SetScaleSelection( m_scaleOpt->GetSelection() );
    tempOptions.SetDrillMarksType( static_cast<PCB_PLOT_PARAMS::DrillMarksType>
                                   ( m_drillShapeOpt->GetSelection() ) );
    tempOptions.SetMirror( m_plotMirrorOpt->GetValue() );
    tempOptions.SetPlotMode( m_plotModeOpt->GetSelection() == 1 ? SKETCH : FILLED );
    tempOptions.SetDXFPlotPolygonMode( m_DXF_plotModeOpt->GetValue() );
    tempOptions.SetPlotViaOnMaskLayer( m_plotNoViaOnMaskOpt->GetValue() );

    if( !m_DXF_plotTextStrokeFontOpt->IsEnabled() )     // Currently, only DXF supports this option
        tempOptions.SetTextMode( PLOTTEXTMODE_DEFAULT  );
    else
        tempOptions.SetTextMode( m_DXF_plotTextStrokeFontOpt->GetValue() ?
                                 PLOTTEXTMODE_DEFAULT : PLOTTEXTMODE_NATIVE );

    // Update settings from text fields. Rewrite values back to the fields,
    // since the values may have been constrained by the setters.

    // read HPLG pen size (this param is stored in mils)
    wxString    msg = m_HPGLPenSizeOpt->GetValue();
    int         tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;

    if( !tempOptions.SetHPGLPenDiameter( tmp ) )
    {
        msg = StringFromValue( g_UserUnit, tempOptions.GetHPGLPenDiameter() * IU_PER_MILS );
        m_HPGLPenSizeOpt->SetValue( msg );
        msg.Printf( _( "HPGL pen size constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    // Default linewidth
    msg = m_linesWidth->GetValue();
    tmp = ValueFromString( g_UserUnit, msg );

    if( !tempOptions.SetLineWidth( tmp ) )
    {
        msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
        m_linesWidth->SetValue( msg );
        msg.Printf( _( "Default line width constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    // X scale
    double tmpDouble;
    msg = m_fineAdjustXscaleOpt->GetValue();
    msg.ToDouble( &tmpDouble );

    if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
    {
        msg.Printf( wxT( "%f" ), m_XScaleAdjust );
        m_fineAdjustXscaleOpt->SetValue( msg );
        msg.Printf( _( "X scale constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );

    // Y scale
    msg = m_fineAdjustYscaleOpt->GetValue();
    msg.ToDouble( &tmpDouble );

    if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
    {
        msg.Printf( wxT( "%f" ), m_YScaleAdjust );
        m_fineAdjustYscaleOpt->SetValue( msg );
        msg.Printf( _( "Y scale constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );

    // PS Width correction
    msg = m_PSFineAdjustWidthOpt->GetValue();
    int itmp = ValueFromString( g_UserUnit, msg );

    if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
    {
        msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
        m_PSFineAdjustWidthOpt->SetValue( msg );
        msg.Printf( _( "Width correction constrained. "
                       "The reasonable width correction value must be in a range of "
                       " [%+f; %+f] (%s) for current design rules. " ),
                    To_User_Unit( g_UserUnit, m_widthAdjustMinValue ),
                    To_User_Unit( g_UserUnit, m_widthAdjustMaxValue ),
                    ( g_UserUnit == INCHES ) ? wxT( "\"" ) : wxT( "mm" ) );
        reporter.Report( msg, REPORTER::RPT_WARNING );
    }
//.........这里部分代码省略.........

开发者ID:cpavlina，项目名称:kicad，代码行数:101，代码来源:dialog_plot.cpp

示例2: applyPlotSettings

void DIALOG_PLOT::applyPlotSettings()
{
    REPORTER&   reporter = m_messagesPanel->Reporter();

    PCB_PLOT_PARAMS tempOptions;

    tempOptions.SetExcludeEdgeLayer( m_excludeEdgeLayerOpt->GetValue() );
    tempOptions.SetSubtractMaskFromSilk( m_subtractMaskFromSilk->GetValue() );
    tempOptions.SetPlotFrameRef( m_plotSheetRef->GetValue() );
    tempOptions.SetPlotPadsOnSilkLayer( m_plotPads_on_Silkscreen->GetValue() );
    tempOptions.SetUseAuxOrigin( m_useAuxOriginCheckBox->GetValue() );
    tempOptions.SetPlotValue( m_plotModuleValueOpt->GetValue() );
    tempOptions.SetPlotReference( m_plotModuleRefOpt->GetValue() );
    tempOptions.SetPlotInvisibleText( m_plotInvisibleText->GetValue() );
    tempOptions.SetScaleSelection( m_scaleOpt->GetSelection() );
    tempOptions.SetDrillMarksType( static_cast<PCB_PLOT_PARAMS::DrillMarksType>
                                   ( m_drillShapeOpt->GetSelection() ) );
    tempOptions.SetMirror( m_plotMirrorOpt->GetValue() );
    tempOptions.SetPlotMode( m_plotModeOpt->GetSelection() == 1 ? SKETCH : FILLED );
    tempOptions.SetPlotViaOnMaskLayer( m_plotNoViaOnMaskOpt->GetValue() );

    // Update settings from text fields. Rewrite values back to the fields,
    // since the values may have been constrained by the setters.

    // read HPLG pen size (this param is stored in mils)
    wxString    msg = m_HPGLPenSizeOpt->GetValue();
    int         tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;

    if( !tempOptions.SetHPGLPenDiameter( tmp ) )
    {
        msg = StringFromValue( g_UserUnit, tempOptions.GetHPGLPenDiameter() * IU_PER_MILS );
        m_HPGLPenSizeOpt->SetValue( msg );
        msg.Printf( _( "HPGL pen size constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    // Read HPGL pen overlay (this param is stored in mils)
    msg = m_HPGLPenOverlayOpt->GetValue();
    tmp = ValueFromString( g_UserUnit, msg ) / IU_PER_MILS;

    if( !tempOptions.SetHPGLPenOverlay( tmp ) )
    {
        msg = StringFromValue( g_UserUnit,
                                     tempOptions.GetHPGLPenOverlay() * IU_PER_MILS );
        m_HPGLPenOverlayOpt->SetValue( msg );
        msg.Printf( _( "HPGL pen overlay constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    // Default linewidth
    msg = m_linesWidth->GetValue();
    tmp = ValueFromString( g_UserUnit, msg );

    if( !tempOptions.SetLineWidth( tmp ) )
    {
        msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
        m_linesWidth->SetValue( msg );
        msg.Printf( _( "Default line width constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    // X scale
    double tmpDouble;
    msg = m_fineAdjustXscaleOpt->GetValue();
    msg.ToDouble( &tmpDouble );

    if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
    {
        msg.Printf( wxT( "%f" ), m_XScaleAdjust );
        m_fineAdjustXscaleOpt->SetValue( msg );
        msg.Printf( _( "X scale constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );

    // Y scale
    msg = m_fineAdjustYscaleOpt->GetValue();
    msg.ToDouble( &tmpDouble );

    if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
    {
        msg.Printf( wxT( "%f" ), m_YScaleAdjust );
        m_fineAdjustYscaleOpt->SetValue( msg );
        msg.Printf( _( "Y scale constrained." ) );
        reporter.Report( msg, REPORTER::RPT_INFO );
    }

    ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );

    // PS Width correction
    msg = m_PSFineAdjustWidthOpt->GetValue();
    int itmp = ValueFromString( g_UserUnit, msg );

    if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
    {
        msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
        m_PSFineAdjustWidthOpt->SetValue( msg );
        msg.Printf( _( "Width correction constrained. "
                       "The reasonable width correction value must be in a range of "
//.........这里部分代码省略.........

开发者ID:JOE-JOE-NGIGI，项目名称:kicad，代码行数:101，代码来源:dialog_plot.cpp

注：本文中的PCB_PLOT_PARAMS::SetExcludeEdgeLayer方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。