本文整理汇总了C++中PCB_PLOT_PARAMS::SetGerberPrecision方法的典型用法代码示例。如果您正苦于以下问题：C++ PCB_PLOT_PARAMS::SetGerberPrecision方法的具体用法？C++ PCB_PLOT_PARAMS::SetGerberPrecision怎么用？C++ PCB_PLOT_PARAMS::SetGerberPrecision使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类PCB_PLOT_PARAMS的用法示例。
在下文中一共展示了PCB_PLOT_PARAMS::SetGerberPrecision方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: applyPlotSettings
//.........这里部分代码省略.........
if( !tempOptions.SetLineWidth( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
m_linesWidth->SetValue( msg );
msg.Printf( _( "Default line width constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// X scale
double tmpDouble;
msg = m_fineAdjustXscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_XScaleAdjust );
m_fineAdjustXscaleOpt->SetValue( msg );
msg.Printf( _( "X scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );
// Y scale
msg = m_fineAdjustYscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_YScaleAdjust );
m_fineAdjustYscaleOpt->SetValue( msg );
msg.Printf( _( "Y scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );
// PS Width correction
msg = m_PSFineAdjustWidthOpt->GetValue();
int itmp = ValueFromString( g_UserUnit, msg );
if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
{
msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
m_PSFineAdjustWidthOpt->SetValue( msg );
msg.Printf( _( "Width correction constrained. "
"The reasonable width correction value must be in a range of "
" [%+f; %+f] (%s) for current design rules. " ),
To_User_Unit( g_UserUnit, m_widthAdjustMinValue ),
To_User_Unit( g_UserUnit, m_widthAdjustMaxValue ),
( g_UserUnit == INCHES ) ? wxT( "\"" ) : wxT( "mm" ) );
reporter.Report( msg, REPORTER::RPT_WARNING );
}
// Store m_PSWidthAdjust in mm in user config
ConfigBaseWriteDouble( m_config, CONFIG_PS_FINEWIDTH_ADJ,
(double)m_PSWidthAdjust / IU_PER_MM );
tempOptions.SetFormat( getPlotFormat() );
tempOptions.SetUseGerberProtelExtensions( m_useGerberExtensions->GetValue() );
tempOptions.SetUseGerberAttributes( m_useGerberX2Attributes->GetValue() );
tempOptions.SetIncludeGerberNetlistInfo( m_useGerberNetAttributes->GetValue() );
tempOptions.SetCreateGerberJobFile( m_generateGerberJobFile->GetValue() );
tempOptions.SetGerberPrecision( m_rbGerberFormat->GetSelection() == 0 ? 5 : 6 );
LSET selectedLayers;
for( unsigned i = 0; i < m_layerList.size(); i++ )
{
if( m_layerCheckListBox->IsChecked( i ) )
selectedLayers.set( m_layerList[i] );
}
// Get a list of copper layers that aren't being used by inverting enabled layers.
LSET disabledCopperLayers = LSET::AllCuMask() & ~m_board->GetEnabledLayers();
// Enable all of the disabled copper layers.
// If someone enables more copper layers they will be selected by default.
selectedLayers = selectedLayers | disabledCopperLayers;
tempOptions.SetLayerSelection( selectedLayers );
tempOptions.SetNegative( m_plotPSNegativeOpt->GetValue() );
tempOptions.SetA4Output( m_forcePSA4OutputOpt->GetValue() );
// Set output directory and replace backslashes with forward ones
wxString dirStr;
dirStr = m_outputDirectoryName->GetValue();
dirStr.Replace( wxT( "\\" ), wxT( "/" ) );
tempOptions.SetOutputDirectory( dirStr );
if( !m_plotOpts.IsSameAs( tempOptions, false ) )
{
// First, mark board as modified only for parameters saved in file
if( !m_plotOpts.IsSameAs( tempOptions, true ) )
m_parent->OnModify();
// Now, save any change, for the session
m_parent->SetPlotSettings( tempOptions );
m_plotOpts = tempOptions;
}
}示例2: applyPlotSettings
//.........这里部分代码省略.........
msg = StringFromValue( g_UserUnit,
tempOptions.GetHPGLPenOverlay() * IU_PER_MILS );
m_HPGLPenOverlayOpt->SetValue( msg );
msg.Printf( _( "HPGL pen overlay constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// Default linewidth
msg = m_linesWidth->GetValue();
tmp = ValueFromString( g_UserUnit, msg );
if( !tempOptions.SetLineWidth( tmp ) )
{
msg = StringFromValue( g_UserUnit, tempOptions.GetLineWidth() );
m_linesWidth->SetValue( msg );
msg.Printf( _( "Default line width constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
// X scale
double tmpDouble;
msg = m_fineAdjustXscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_XScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_XScaleAdjust );
m_fineAdjustXscaleOpt->SetValue( msg );
msg.Printf( _( "X scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_X_FINESCALE_ADJ, m_XScaleAdjust );
// Y scale
msg = m_fineAdjustYscaleOpt->GetValue();
msg.ToDouble( &tmpDouble );
if( !setDouble( &m_YScaleAdjust, tmpDouble, PLOT_MIN_SCALE, PLOT_MAX_SCALE ) )
{
msg.Printf( wxT( "%f" ), m_YScaleAdjust );
m_fineAdjustYscaleOpt->SetValue( msg );
msg.Printf( _( "Y scale constrained." ) );
reporter.Report( msg, REPORTER::RPT_INFO );
}
ConfigBaseWriteDouble( m_config, OPTKEY_PLOT_Y_FINESCALE_ADJ, m_YScaleAdjust );
// PS Width correction
msg = m_PSFineAdjustWidthOpt->GetValue();
int itmp = ValueFromString( g_UserUnit, msg );
if( !setInt( &m_PSWidthAdjust, itmp, m_widthAdjustMinValue, m_widthAdjustMaxValue ) )
{
msg = StringFromValue( g_UserUnit, m_PSWidthAdjust );
m_PSFineAdjustWidthOpt->SetValue( msg );
msg.Printf( _( "Width correction constrained. "
"The reasonable width correction value must be in a range of "
" [%+f; %+f] (%s) for current design rules. " ),
To_User_Unit( g_UserUnit, m_widthAdjustMinValue ),
To_User_Unit( g_UserUnit, m_widthAdjustMaxValue ),
( g_UserUnit == INCHES ) ? wxT( "\"" ) : wxT( "mm" ) );
reporter.Report( msg, REPORTER::RPT_WARNING );
}
// Store m_PSWidthAdjust in mm in user config
ConfigBaseWriteDouble( m_config, CONFIG_PS_FINEWIDTH_ADJ,
(double)m_PSWidthAdjust / IU_PER_MM );
tempOptions.SetFormat( getPlotFormat() );
tempOptions.SetUseGerberExtensions( m_useGerberExtensions->GetValue() );
tempOptions.SetUseGerberAttributes( m_useGerberAttributes->GetValue() );
tempOptions.SetGerberPrecision( m_rbGerberFormat->GetSelection() == 0 ? 5 : 6 );
LSET selectedLayers;
for( unsigned i = 0; i < m_layerList.size(); i++ )
{
if( m_layerCheckListBox->IsChecked( i ) )
selectedLayers.set( m_layerList[i] );
}
tempOptions.SetLayerSelection( selectedLayers );
tempOptions.SetNegative( m_plotPSNegativeOpt->GetValue() );
tempOptions.SetA4Output( m_forcePSA4OutputOpt->GetValue() );
// Set output directory and replace backslashes with forward ones
wxString dirStr;
dirStr = m_outputDirectoryName->GetValue();
dirStr.Replace( wxT( "\\" ), wxT( "/" ) );
tempOptions.SetOutputDirectory( dirStr );
if( m_plotOpts != tempOptions )
{
m_parent->SetPlotSettings( tempOptions );
m_plotOpts = tempOptions;
m_parent->OnModify();
}
}