C++ LiveInterval::end方法代码示例

/// When adding a new instruction to liveness, the newly added definition
/// will start a new live segment. This may happen at a position that falls
/// within an existing live segment. In such case that live segment needs to
/// be truncated to make room for the new segment. Ultimately, the truncation
/// will occur at the last use, but for now the segment can be terminated
/// right at the place where the new segment will start. The segments will be
/// shrunk-to-uses later.
void HexagonExpandCondsets::terminateSegment(LiveInterval::iterator LT,
      SlotIndex S, LiveInterval &LI) {
  // Terminate the live segment pointed to by LT within a live interval LI.
  if (LT == LI.end())
    return;

  VNInfo *OldVN = LT->valno;
  SlotIndex EX = LT->end;
  LT->end = S;
  // If LT does not end at a block boundary, the termination is done.
  if (!EX.isBlock())
    return;

  // If LT ended at a block boundary, it's possible that its value number
  // is picked up at the beginning other blocks. Create a new value number
  // and change such blocks to use it instead.
  VNInfo *NewVN = 0;
  for (LiveInterval::iterator I = LI.begin(), E = LI.end(); I != E; ++I) {
    if (!I->start.isBlock() || I->valno != OldVN)
      continue;
    // Generate on-demand a new value number that is defined by the
    // block beginning (i.e. -phi).
    if (!NewVN)
      NewVN = LI.getNextValue(I->start, LIS->getVNInfoAllocator());
    I->valno = NewVN;
  }
}

LiveInterval::iterator HexagonExpandCondsets::nextSegment(LiveInterval &LI,
      SlotIndex S) {
  for (LiveInterval::iterator I = LI.begin(), E = LI.end(); I != E; ++I) {
    if (I->start >= S)
      return I;
  }
  return LI.end();
}

LiveInterval::iterator HexagonExpandCondsets::prevSegment(LiveInterval &LI,
      SlotIndex S) {
  LiveInterval::iterator P = LI.end();
  for (LiveInterval::iterator I = LI.begin(), E = LI.end(); I != E; ++I) {
    if (I->end > S)
      return P;
    P = I;
  }
  return P;
}

/// Shrink the segments in the live interval for a given register to the last
/// use before each subsequent def. Unlike LiveIntervals::shrinkToUses, this
/// function will not mark any definitions of Reg as dead. The reason for this
/// is that this function is used while a MUX instruction is being expanded,
/// or while a conditional copy is undergoing predication. During these
/// processes, there may be defs present in the instruction sequence that have
/// not yet been removed, or there may be missing uses that have not yet been
/// added. We want to utilize LiveIntervals::shrinkToUses as much as possible,
/// but since it does not extend any intervals that are too short, we need to
/// pre-emptively extend them here in anticipation of further changes.
void HexagonExpandCondsets::shrinkToUses(unsigned Reg, LiveInterval &LI) {
  SmallVector<MachineInstr*,4> Deads;
  LIS->shrinkToUses(&LI, &Deads);
  // Need to undo the deadification made by "shrinkToUses". It's easier to
  // do it here, since we have a list of all instructions that were just
  // marked as dead.
  for (unsigned i = 0, n = Deads.size(); i < n; ++i) {
    MachineInstr *MI = Deads[i];
    // Clear the "dead" flag.
    for (auto &Op : MI->operands()) {
      if (!Op.isReg() || !Op.isDef() || Op.getReg() != Reg)
        continue;
      Op.setIsDead(false);
    }
    // Extend the live segment to the beginning of the next one.
    LiveInterval::iterator End = LI.end();
    SlotIndex S = LIS->getInstructionIndex(*MI).getRegSlot();
    LiveInterval::iterator T = LI.FindSegmentContaining(S);
    assert(T != End);
    LiveInterval::iterator N = std::next(T);
    if (N != End)
      T->end = N->start;
    else
      T->end = LIS->getMBBEndIdx(MI->getParent());
  }
  updateKillFlags(Reg, LI);
}

void SplitEditor::deleteRematVictims() {
  SmallVector<MachineInstr*, 8> Dead;
  for (LiveRangeEdit::iterator I = Edit->begin(), E = Edit->end(); I != E; ++I){
    LiveInterval *LI = *I;
    for (LiveInterval::const_iterator LII = LI->begin(), LIE = LI->end();
           LII != LIE; ++LII) {
      // Dead defs end at the store slot.
      if (LII->end != LII->valno->def.getNextSlot())
        continue;
      MachineInstr *MI = LIS.getInstructionFromIndex(LII->valno->def);
      assert(MI && "Missing instruction for dead def");
      MI->addRegisterDead(LI->reg, &TRI);

      if (!MI->allDefsAreDead())
        continue;

      DEBUG(dbgs() << "All defs dead: " << *MI);
      Dead.push_back(MI);
    }
  }

  if (Dead.empty())
    return;

  Edit->eliminateDeadDefs(Dead, LIS, VRM, TII);
}

// Merge a LiveInterval's segments. Guarantee no overlaps.
void LiveIntervalUnion::unify(LiveInterval &VirtReg) {
  if (VirtReg.empty())
    return;
  ++Tag;

  // Insert each of the virtual register's live segments into the map.
  LiveInterval::iterator RegPos = VirtReg.begin();
  LiveInterval::iterator RegEnd = VirtReg.end();
  SegmentIter SegPos = Segments.find(RegPos->start);

  while (SegPos.valid()) {
    SegPos.insert(RegPos->start, RegPos->end, &VirtReg);
    if (++RegPos == RegEnd)
      return;
    SegPos.advanceTo(RegPos->start);
  }

  // We have reached the end of Segments, so it is no longer necessary to search
  // for the insertion position.
  // It is faster to insert the end first.
  --RegEnd;
  SegPos.insert(RegEnd->start, RegEnd->end, &VirtReg);
  for (; RegPos != RegEnd; ++RegPos, ++SegPos)
    SegPos.insert(RegPos->start, RegPos->end, &VirtReg);
}

void ConnectedVNInfoEqClasses::Distribute(LiveInterval &LI, LiveInterval *LIV[],
                                          MachineRegisterInfo &MRI) {
  // Rewrite instructions.
  for (MachineRegisterInfo::reg_iterator RI = MRI.reg_begin(LI.reg),
       RE = MRI.reg_end(); RI != RE;) {
    MachineOperand &MO = *RI;
    MachineInstr *MI = RI->getParent();
    ++RI;
    // DBG_VALUE instructions don't have slot indexes, so get the index of the
    // instruction before them.
    // Normally, DBG_VALUE instructions are removed before this function is
    // called, but it is not a requirement.
    SlotIndex Idx;
    if (MI->isDebugValue())
      Idx = LIS.getSlotIndexes()->getIndexBefore(MI);
    else
      Idx = LIS.getInstructionIndex(MI);
    LiveQueryResult LRQ = LI.Query(Idx);
    const VNInfo *VNI = MO.readsReg() ? LRQ.valueIn() : LRQ.valueDefined();
    // In the case of an <undef> use that isn't tied to any def, VNI will be
    // NULL. If the use is tied to a def, VNI will be the defined value.
    if (!VNI)
      continue;
    if (unsigned EqClass = getEqClass(VNI))
      MO.setReg(LIV[EqClass-1]->reg);
  }

  // Move runs to new intervals.
  LiveInterval::iterator J = LI.begin(), E = LI.end();
  while (J != E && EqClass[J->valno->id] == 0)
    ++J;
  for (LiveInterval::iterator I = J; I != E; ++I) {
    if (unsigned eq = EqClass[I->valno->id]) {
      assert((LIV[eq-1]->empty() || LIV[eq-1]->expiredAt(I->start)) &&
             "New intervals should be empty");
      LIV[eq-1]->segments.push_back(*I);
    } else
      *J++ = *I;
  }
  // TODO: do not cheat anymore by simply cleaning all subranges
  LI.clearSubRanges();
  LI.segments.erase(J, E);

  // Transfer VNInfos to their new owners and renumber them.
  unsigned j = 0, e = LI.getNumValNums();
  while (j != e && EqClass[j] == 0)
    ++j;
  for (unsigned i = j; i != e; ++i) {
    VNInfo *VNI = LI.getValNumInfo(i);
    if (unsigned eq = EqClass[i]) {
      VNI->id = LIV[eq-1]->getNumValNums();
      LIV[eq-1]->valnos.push_back(VNI);
    } else {
      VNI->id = j;
      LI.valnos[j++] = VNI;
    }
  }
  LI.valnos.resize(j);
}

/// MergeValueInAsValue - Merge all of the live ranges of a specific val#
/// in RHS into this live interval as the specified value number.
/// The LiveRanges in RHS are allowed to overlap with LiveRanges in the
/// current interval, it will replace the value numbers of the overlaped
/// live ranges with the specified value number.
void LiveInterval::MergeValueInAsValue(const LiveInterval &RHS,
                                       const VNInfo *RHSValNo,
                                       VNInfo *LHSValNo) {
  LiveRangeUpdater Updater(this);
  for (const_iterator I = RHS.begin(), E = RHS.end(); I != E; ++I)
    if (I->valno == RHSValNo)
      Updater.add(I->start, I->end, LHSValNo);
}

static void determineMissingVNIs(const SlotIndexes &Indexes, LiveInterval &LI) {
  SmallPtrSet<const MachineBasicBlock*, 5> Visited;

  LiveRange::iterator OutIt;
  VNInfo *PrevValNo = nullptr;
  for (LiveRange::iterator I = LI.begin(), E = LI.end(); I != E; ++I) {
    LiveRange::Segment &S = *I;
    // Determine final VNI if necessary.
    if (S.valno == nullptr) {
      // This can only happen at the begin of a basic block.
      assert(S.start.isBlock() && "valno should only be missing at block begin");

      Visited.clear();
      const MachineBasicBlock *MBB = Indexes.getMBBFromIndex(S.start);
      for (const MachineBasicBlock *Pred : MBB->predecessors()) {
        VNInfo *VNI = searchForVNI(Indexes, LI, Pred, Visited);
        if (VNI != nullptr) {
          S.valno = VNI;
          break;
        }
      }
      assert(S.valno != nullptr && "could not determine valno");
    }
    // Merge with previous segment if it has the same VNI.
    if (PrevValNo == S.valno && OutIt->end == S.start) {
      OutIt->end = S.end;
    } else {
      // Didn't merge. Move OutIt to next segment.
      if (PrevValNo == nullptr)
        OutIt = LI.begin();
      else
        ++OutIt;

      if (OutIt != I)
        *OutIt = *I;
      PrevValNo = S.valno;
    }
  }
  // If we merged some segments chop off the end.
  ++OutIt;
  LI.segments.erase(OutIt, LI.end());
}

/// MergeValueInAsValue - Merge all of the live ranges of a specific val#
/// in RHS into this live interval as the specified value number.
/// The LiveRanges in RHS are allowed to overlap with LiveRanges in the
/// current interval, it will replace the value numbers of the overlaped
/// live ranges with the specified value number.
void LiveInterval::MergeValueInAsValue(
                                    const LiveInterval &RHS,
                                    const VNInfo *RHSValNo, VNInfo *LHSValNo) {
  SmallVector<VNInfo*, 4> ReplacedValNos;
  iterator IP = begin();
  for (const_iterator I = RHS.begin(), E = RHS.end(); I != E; ++I) {
    assert(I->valno == RHS.getValNumInfo(I->valno->id) && "Bad VNInfo");
    if (I->valno != RHSValNo)
      continue;
    SlotIndex Start = I->start, End = I->end;
    IP = std::upper_bound(IP, end(), Start);
    // If the start of this range overlaps with an existing liverange, trim it.
    if (IP != begin() && IP[-1].end > Start) {
      if (IP[-1].valno != LHSValNo) {
        ReplacedValNos.push_back(IP[-1].valno);
        IP[-1].valno = LHSValNo; // Update val#.
      }
      Start = IP[-1].end;
      // Trimmed away the whole range?
      if (Start >= End) continue;
    }
    // If the end of this range overlaps with an existing liverange, trim it.
    if (IP != end() && End > IP->start) {
      if (IP->valno != LHSValNo) {
        ReplacedValNos.push_back(IP->valno);
        IP->valno = LHSValNo;  // Update val#.
      }
      End = IP->start;
      // If this trimmed away the whole range, ignore it.
      if (Start == End) continue;
    }

    // Map the valno in the other live range to the current live range.
    IP = addRangeFrom(LiveRange(Start, End, LHSValNo), IP);
  }


  SmallSet<VNInfo*, 4> Seen;
  for (unsigned i = 0, e = ReplacedValNos.size(); i != e; ++i) {
    VNInfo *V1 = ReplacedValNos[i];
    if (Seen.insert(V1)) {
      bool isDead = true;
      for (const_iterator I = begin(), E = end(); I != E; ++I)
        if (I->valno == V1) {
          isDead = false;
          break;
        }
      if (isDead) {
        // Now that V1 is dead, remove it.
        markValNoForDeletion(V1);
      }
    }
  }
}

/// MergeRangesInAsValue - Merge all of the intervals in RHS into this live
/// interval as the specified value number.  The LiveRanges in RHS are
/// allowed to overlap with LiveRanges in the current interval, but only if
/// the overlapping LiveRanges have the specified value number.
void LiveInterval::MergeRangesInAsValue(const LiveInterval &RHS,
                                        VNInfo *LHSValNo) {
  // TODO: Make this more efficient.
  iterator InsertPos = begin();
  for (const_iterator I = RHS.begin(), E = RHS.end(); I != E; ++I) {
    // Map the valno in the other live range to the current live range.
    LiveRange Tmp = *I;
    Tmp.valno = LHSValNo;
    InsertPos = addRangeFrom(Tmp, InsertPos);
  }
}

bool LiveIntervals::checkRegMaskInterference(LiveInterval &LI,
                                             BitVector &UsableRegs) {
  if (LI.empty())
    return false;
  LiveInterval::iterator LiveI = LI.begin(), LiveE = LI.end();

  // Use a smaller arrays for local live ranges.
  ArrayRef<SlotIndex> Slots;
  ArrayRef<const uint32_t*> Bits;
  if (MachineBasicBlock *MBB = intervalIsInOneMBB(LI)) {
    Slots = getRegMaskSlotsInBlock(MBB->getNumber());
    Bits = getRegMaskBitsInBlock(MBB->getNumber());
  } else {
    Slots = getRegMaskSlots();
    Bits = getRegMaskBits();
  }

  // We are going to enumerate all the register mask slots contained in LI.
  // Start with a binary search of RegMaskSlots to find a starting point.
  ArrayRef<SlotIndex>::iterator SlotI =
    std::lower_bound(Slots.begin(), Slots.end(), LiveI->start);
  ArrayRef<SlotIndex>::iterator SlotE = Slots.end();

  // No slots in range, LI begins after the last call.
  if (SlotI == SlotE)
    return false;

  bool Found = false;
  for (;;) {
    assert(*SlotI >= LiveI->start);
    // Loop over all slots overlapping this segment.
    while (*SlotI < LiveI->end) {
      // *SlotI overlaps LI. Collect mask bits.
      if (!Found) {
        // This is the first overlap. Initialize UsableRegs to all ones.
        UsableRegs.clear();
        UsableRegs.resize(TRI->getNumRegs(), true);
        Found = true;
      }
      // Remove usable registers clobbered by this mask.
      UsableRegs.clearBitsNotInMask(Bits[SlotI-Slots.begin()]);
      if (++SlotI == SlotE)
        return Found;
    }
    // *SlotI is beyond the current LI segment.
    LiveI = LI.advanceTo(LiveI, *SlotI);
    if (LiveI == LiveE)
      return Found;
    // Advance SlotI until it overlaps.
    while (*SlotI < LiveI->start)
      if (++SlotI == SlotE)
        return Found;
  }
}

bool HexagonExpandCondsets::isIntraBlocks(LiveInterval &LI) {
  for (LiveInterval::iterator I = LI.begin(), E = LI.end(); I != E; ++I) {
    LiveRange::Segment &LR = *I;
    // Range must start at a register...
    if (!LR.start.isRegister())
      return false;
    // ...and end in a register or in a dead slot.
    if (!LR.end.isRegister() && !LR.end.isDead())
      return false;
  }
  return true;
}

// overlaps - Return true if the intersection of the two live intervals is
// not empty.
//
// An example for overlaps():
//
// 0: A = ...
// 4: B = ...
// 8: C = A + B ;; last use of A
//
// The live intervals should look like:
//
// A = [3, 11)
// B = [7, x)
// C = [11, y)
//
// A->overlaps(C) should return false since we want to be able to join
// A and C.
//
bool LiveInterval::overlapsFrom(const LiveInterval& other,
                                const_iterator StartPos) const {
  assert(!empty() && "empty interval");
  const_iterator i = begin();
  const_iterator ie = end();
  const_iterator j = StartPos;
  const_iterator je = other.end();

  assert((StartPos->start <= i->start || StartPos == other.begin()) &&
         StartPos != other.end() && "Bogus start position hint!");

  if (i->start < j->start) {
    i = std::upper_bound(i, ie, j->start);
    if (i != ranges.begin()) --i;
  } else if (j->start < i->start) {
    ++StartPos;
    if (StartPos != other.end() && StartPos->start <= i->start) {
      assert(StartPos < other.end() && i < end());
      j = std::upper_bound(j, je, i->start);
      if (j != other.ranges.begin()) --j;
    }
  } else {
    return true;
  }

  if (j == je) return false;

  while (i != ie) {
    if (i->start > j->start) {
      std::swap(i, j);
      std::swap(ie, je);
    }

    if (i->end > j->start)
      return true;
    ++i;
  }

  return false;
}

// Merge a LiveInterval's segments. Guarantee no overlaps.
void LiveIntervalUnion::unify(LiveInterval &VirtReg) {
  if (VirtReg.empty())
    return;

  // Insert each of the virtual register's live segments into the map.
  LiveInterval::iterator RegPos = VirtReg.begin();
  LiveInterval::iterator RegEnd = VirtReg.end();
  SegmentIter SegPos = Segments.find(RegPos->start);

  for (;;) {
    SegPos.insert(RegPos->start, RegPos->end, &VirtReg);
    if (++RegPos == RegEnd)
      return;
    SegPos.advanceTo(RegPos->start);
  }
}