本文整理汇总了C++中GCodeExport::addComment方法的典型用法代码示例。如果您正苦于以下问题：C++ GCodeExport::addComment方法的具体用法？C++ GCodeExport::addComment怎么用？C++ GCodeExport::addComment使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类GCodeExport的用法示例。
在下文中一共展示了GCodeExport::addComment方法的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: processFile
//.........这里部分代码省略.........
generateRaft(storage, config.raftMargin);
for(unsigned int volumeIdx=0; volumeIdx<storage.volumes.size(); volumeIdx++)
{
for(unsigned int layerNr=0; layerNr<totalLayers; layerNr++)
{
for(unsigned int partNr=0; partNr<storage.volumes[volumeIdx].layers[layerNr].parts.size(); partNr++)
{
if (layerNr > 0)
storage.volumes[volumeIdx].layers[layerNr].parts[partNr].bridgeAngle = bridgeAngle(&storage.volumes[volumeIdx].layers[layerNr].parts[partNr], &storage.volumes[volumeIdx].layers[layerNr-1]);
else
storage.volumes[volumeIdx].layers[layerNr].parts[partNr].bridgeAngle = -1;
}
}
}
gcode.setRetractionSettings(config.retractionAmount, config.retractionSpeed, config.retractionAmountExtruderSwitch, config.minimalExtrusionBeforeRetraction);
if (firstFile)
{
if (gcode.getFlavor() == GCODE_FLAVOR_ULTIGCODE)
{
gcode.addCode(";FLAVOR:UltiGCode");
gcode.addCode(";TIME:<__TIME__>");
gcode.addCode(";MATERIAL:<FILAMENT>");
}
gcode.addCode(config.startCode);
} else {
gcode.addFanCommand(0);
gcode.resetExtrusionValue();
gcode.addRetraction();
gcode.setZ(maxObjectHeight + 5000);
gcode.addMove(Point(storage.modelMin.x, storage.modelMin.y), config.moveSpeed, 0);
}
gcode.addComment("total_layers=%d",totalLayers);
GCodePathConfig skirtConfig(config.printSpeed, config.extrusionWidth, "SKIRT");
GCodePathConfig inset0Config(config.printSpeed, config.extrusionWidth, "WALL-OUTER");
GCodePathConfig inset1Config(config.printSpeed, config.extrusionWidth, "WALL-INNER");
GCodePathConfig fillConfig(config.infillSpeed, config.extrusionWidth, "FILL");
GCodePathConfig supportConfig(config.printSpeed, config.extrusionWidth, "SUPPORT");
if (config.raftBaseThickness > 0 && config.raftInterfaceThickness > 0)
{
GCodePathConfig raftBaseConfig(config.initialLayerSpeed, config.raftBaseLinewidth, "SUPPORT");
GCodePathConfig raftInterfaceConfig(config.initialLayerSpeed, config.raftInterfaceLinewidth, "SUPPORT");
{
gcode.addComment("LAYER:-2");
gcode.addComment("RAFT");
GCodePlanner gcodeLayer(gcode, config.moveSpeed, config.retractionMinimalDistance);
gcode.setZ(config.raftBaseThickness);
gcode.setExtrusion(config.raftBaseThickness, config.filamentDiameter, config.filamentFlow);
gcodeLayer.addPolygonsByOptimizer(storage.raftOutline, &raftBaseConfig);
Polygons raftLines;
generateLineInfill(storage.raftOutline, raftLines, config.raftBaseLinewidth, config.raftLineSpacing, config.infillOverlap, 0);
gcodeLayer.addPolygonsByOptimizer(raftLines, &raftBaseConfig);
gcodeLayer.writeGCode(false, config.raftBaseThickness);
}
{
gcode.addComment("LAYER:-1");
gcode.addComment("RAFT");
GCodePlanner gcodeLayer(gcode, config.moveSpeed, config.retractionMinimalDistance);
gcode.setZ(config.raftBaseThickness + config.raftInterfaceThickness);
gcode.setExtrusion(config.raftInterfaceThickness, config.filamentDiameter, config.filamentFlow);示例2: main
//.........这里部分代码省略.........
"G28 ;Home\n"
"G1 Z15.0 F300 ;move the platform down 15mm\n"
"G92 E0 ;zero the extruded length\n"
"G1 F200 E5 ;extrude 5mm of feed stock\n"
"G92 E0 ;zero the extruded length again\n";
config.endCode =
"M104 S0 ;extruder heater off\n"
"M140 S0 ;heated bed heater off (if you have it)\n"
"G91 ;relative positioning\n"
"G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n"
"G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\n"
"G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n"
"M84 ;steppers off\n"
"G90 ;absolute positioning\n";
fprintf(stderr,"Cura_SteamEngine version %s\n", VERSION);
for(int argn = 1; argn < argc; argn++)
{
char* str = argv[argn];
if (str[0] == '-')
{
for(str++; *str; str++)
{
switch(*str)
{
case 'h':
print_usage();
exit(1);
case 'v':
verbose_level++;
break;
case 'b':
argn++;
binaryMeshBlob = fopen(argv[argn], "rb");
break;
case 'o':
argn++;
gcode.setFilename(argv[argn]);
if (!gcode.isValid())
{
logError("Failed to open %s for output.\n", argv[argn]);
exit(1);
}
break;
case 's':
{
argn++;
char* valuePtr = strchr(argv[argn], '=');
if (valuePtr)
{
*valuePtr++ = '\0';
if (!config.setSetting(argv[argn], valuePtr))
printf("Setting found: %s %s\n", argv[argn], valuePtr);
}
}
break;
case 'm':
argn++;
sscanf(argv[argn], "%lf,%lf,%lf,%lf,%lf,%lf,%lf,%lf,%lf",
&config.matrix.m[0][0], &config.matrix.m[0][1], &config.matrix.m[0][2],
&config.matrix.m[1][0], &config.matrix.m[1][1], &config.matrix.m[1][2],
&config.matrix.m[2][0], &config.matrix.m[2][1], &config.matrix.m[2][2]);
break;
default:
logError("Unknown option: %c\n", *str);
break;
}
}
} else {
if (!gcode.isValid())
{
logError("No output file specified\n");
return 1;
}
gcode.addComment("Generated with Cura_SteamEngine %s", VERSION);
processFile(argv[argn], config, gcode, fileNr == 0);
fileNr ++;
}
}
if (gcode.isValid())
{
gcode.addFanCommand(0);
gcode.setZ(maxObjectHeight + 5000);
gcode.addMove(gcode.getPositionXY(), config.moveSpeed, 0);
gcode.addCode(config.endCode);
log("Print time: %d\n", int(gcode.getTotalPrintTime()));
log("Filament: %d\n", int(gcode.getTotalFilamentUsed()));
if (gcode.getFlavor() == GCODE_FLAVOR_ULTIGCODE)
{
char numberString[16];
sprintf(numberString, "%d", int(gcode.getTotalPrintTime()));
gcode.replaceTagInStart("<__TIME__>", numberString);
sprintf(numberString, "%d", int(gcode.getTotalFilamentUsed()));
gcode.replaceTagInStart("<FILAMENT>", numberString);
}
}
}示例3: processFile
//.........这里部分代码省略.........
logProgress("skin",layerNr+1,totalLayers);
}
log("Generated up/down skin in %5.3fs\n", timeElapsed(t));
generateSkirt(storage, config.skirtDistance, config.extrusionWidth, config.skirtLineCount);
generateRaft(storage, config.raftMargin);
log("Generated skirt and raft in %5.3fs\n", timeElapsed(t));
for(unsigned int volumeIdx=0; volumeIdx<storage.volumes.size(); volumeIdx++)
{
for(unsigned int layerNr=0; layerNr<totalLayers; layerNr++)
{
for(unsigned int partNr=0; partNr<storage.volumes[volumeIdx].layers[layerNr].parts.size(); partNr++)
{
if (layerNr > 0)
storage.volumes[volumeIdx].layers[layerNr].parts[partNr].bridgeAngle = bridgeAngle(&storage.volumes[volumeIdx].layers[layerNr].parts[partNr], &storage.volumes[volumeIdx].layers[layerNr-1]);
else
storage.volumes[volumeIdx].layers[layerNr].parts[partNr].bridgeAngle = -1;
}
}
}
log("Stored volumes in %5.3fs\n", timeElapsed(t));
gcode.setRetractionSettings(config.retractionAmount, config.retractionSpeed, config.retractionAmountExtruderSwitch);
if (firstFile)
{
gcode.addCode(config.startCode);
}else{
gcode.resetExtrusionValue();
gcode.addRetraction();
gcode.setZ(maxObjectHeight + 5000);
gcode.addMove(config.objectPosition, config.moveSpeed, 0);
}
gcode.addComment("total_layers=%d",totalLayers);
log("Added general info to gcode in %5.3fs\n", timeElapsed(t));
GCodePathConfig skirtConfig(config.printSpeed, config.extrusionWidth, "SKIRT");
GCodePathConfig inset0Config(config.printSpeed, config.extrusionWidth, "WALL-OUTER");
GCodePathConfig inset1Config(config.printSpeed, config.extrusionWidth, "WALL-INNER");
GCodePathConfig fillConfig(config.infillSpeed, config.extrusionWidth, "FILL");
GCodePathConfig supportConfig(config.printSpeed, config.supportLineWidth, "SUPPORT");
if (config.raftBaseThickness > 0 && config.raftInterfaceThickness > 0)
{
GCodePathConfig raftBaseConfig(config.initialLayerSpeed, config.raftBaseLinewidth, "SUPPORT");
GCodePathConfig raftInterfaceConfig(config.initialLayerSpeed, config.raftInterfaceLinewidth, "SUPPORT");
{
gcode.addComment("LAYER:-2");
gcode.addComment("RAFT");
GCodePlanner gcodeLayer(gcode, config.moveSpeed);
gcode.setZ(config.raftBaseThickness);
gcode.setExtrusion(config.raftBaseThickness, config.filamentDiameter, config.filamentFlow);
gcodeLayer.addPolygonsByOptimizer(storage.raftOutline, &raftBaseConfig);
Polygons raftLines;
generateLineInfill(storage.raftOutline, raftLines, config.raftBaseLinewidth, config.raftLineSpacing, config.infillOverlap, 0);
gcodeLayer.addPolygonsByOptimizer(raftLines, &raftBaseConfig);
gcodeLayer.writeGCode(false);
}
{
gcode.addComment("LAYER:-1");
gcode.addComment("RAFT");
GCodePlanner gcodeLayer(gcode, config.moveSpeed);
gcode.setZ(config.raftBaseThickness + config.raftInterfaceThickness);