本文整理汇总了C++中CDXUTDialog::GetControl方法的典型用法代码示例。如果您正苦于以下问题：C++ CDXUTDialog::GetControl方法的具体用法？C++ CDXUTDialog::GetControl怎么用？C++ CDXUTDialog::GetControl使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类CDXUTDialog的用法示例。
在下文中一共展示了CDXUTDialog::GetControl方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: OnResetDevice
//--------------------------------------------------------------------------------------
// Create any D3D9 resources that won't live through a device reset (D3DPOOL_DEFAULT)
// or that are tied to the back buffer size
//--------------------------------------------------------------------------------------
HRESULT CALLBACK OnResetDevice( IDirect3DDevice9* pd3dDevice,
const D3DSURFACE_DESC* pBackBufferSurfaceDesc, void* pUserContext )
{
HRESULT hr;
V_RETURN( g_DialogResourceManager.OnD3D9ResetDevice() );
V_RETURN( g_SettingsDlg.OnD3D9ResetDevice() );
if( g_pFont )
V_RETURN( g_pFont->OnResetDevice() );
if( g_pEffect )
V_RETURN( g_pEffect->OnResetDevice() );
// Create a sprite to help batch calls when drawing many lines of text
V_RETURN( D3DXCreateSprite( pd3dDevice, &g_pTextSprite ) );
// Setup the camera's projection parameters
float fAspectRatio = pBackBufferSurfaceDesc->Width / ( FLOAT )pBackBufferSurfaceDesc->Height;
g_Camera.SetProjParams( D3DX_PI / 4, fAspectRatio, 0.1f, 1000.0f );
g_Camera.SetWindow( pBackBufferSurfaceDesc->Width, pBackBufferSurfaceDesc->Height );
g_HUD.SetLocation( pBackBufferSurfaceDesc->Width - 170, 0 );
g_HUD.SetSize( 170, 170 );
g_SampleUI.SetLocation( 0, 0 );
g_SampleUI.SetSize( pBackBufferSurfaceDesc->Width, pBackBufferSurfaceDesc->Height );
g_SampleUI.GetControl( IDC_STATIC )->SetSize( pBackBufferSurfaceDesc->Width, pBackBufferSurfaceDesc->Height * 6 /
10 );
g_SampleUI.GetControl( IDC_OUTPUT )->SetSize( pBackBufferSurfaceDesc->Width - 170, pBackBufferSurfaceDesc->Height /
4 );
g_SampleUI.GetControl( IDC_EDITBOX1 )->SetLocation( 20, pBackBufferSurfaceDesc->Height - 230 );
g_SampleUI.GetControl( IDC_EDITBOX1 )->SetSize( pBackBufferSurfaceDesc->Width - 40, 32 );
if( g_SampleUI.GetControl( IDC_EDITBOX2 ) )
{
g_SampleUI.GetControl( IDC_EDITBOX2 )->SetLocation( 20, pBackBufferSurfaceDesc->Height - 280 );
g_SampleUI.GetControl( IDC_EDITBOX2 )->SetSize( pBackBufferSurfaceDesc->Width - 40, 45 );
}
g_SampleUI.GetControl( IDC_ENABLEIME )->SetLocation( 130, pBackBufferSurfaceDesc->Height - 80 );
g_SampleUI.GetControl( IDC_DISABLEIME )->SetLocation( 220, pBackBufferSurfaceDesc->Height - 80 );
g_SampleUI.GetControl( IDC_SLIDER )->SetLocation( 10, pBackBufferSurfaceDesc->Height - 140 );
g_SampleUI.GetControl( IDC_CHECKBOX )->SetLocation( 120, pBackBufferSurfaceDesc->Height - 50 );
g_SampleUI.GetControl( IDC_CLEAREDIT )->SetLocation( 120, pBackBufferSurfaceDesc->Height - 25 );
g_SampleUI.GetControl( IDC_COMBOBOX )->SetLocation( 20, pBackBufferSurfaceDesc->Height - 180 );
g_SampleUI.GetControl( IDC_RADIO1A )->SetLocation( pBackBufferSurfaceDesc->Width - 160, 100 );
g_SampleUI.GetControl( IDC_RADIO1B )->SetLocation( pBackBufferSurfaceDesc->Width - 160, 124 );
g_SampleUI.GetControl( IDC_RADIO1C )->SetLocation( pBackBufferSurfaceDesc->Width - 160, 148 );
g_SampleUI.GetControl( IDC_RADIO2A )->SetLocation( 20, pBackBufferSurfaceDesc->Height - 100 );
g_SampleUI.GetControl( IDC_RADIO2B )->SetLocation( 20, pBackBufferSurfaceDesc->Height - 76 );
g_SampleUI.GetControl( IDC_RADIO2C )->SetLocation( 20, pBackBufferSurfaceDesc->Height - 52 );
g_SampleUI.GetControl( IDC_LISTBOX )->SetLocation( pBackBufferSurfaceDesc->Width - 400,
pBackBufferSurfaceDesc->Height - 180 );
g_SampleUI.GetControl( IDC_LISTBOX )->SetSize( 190, 96 );
g_SampleUI.GetControl( IDC_LISTBOXM )->SetLocation( pBackBufferSurfaceDesc->Width - 200,
pBackBufferSurfaceDesc->Height - 180 );
g_SampleUI.GetControl( IDC_LISTBOXM )->SetSize( 190, 124 );
g_Mesh.RestoreDeviceObjects( pd3dDevice );
return S_OK;
}示例2: InitApp
//--------------------------------------------------------------------------------------
// Initialize the app
//--------------------------------------------------------------------------------------
void InitApp()
{
// Initialize dialogs
g_SettingsDlg.Init( &g_DialogResourceManager );
g_HUD.Init( &g_DialogResourceManager );
g_SampleUI.Init( &g_DialogResourceManager );
g_HUD.SetCallback( OnGUIEvent ); int iY = 10;
g_HUD.AddButton( IDC_TOGGLEFULLSCREEN, L"Toggle full screen", 35, iY, 125, 22 );
g_HUD.AddButton( IDC_TOGGLEREF, L"Toggle REF (F3)", 35, iY += 24, 125, 22 );
g_HUD.AddButton( IDC_CHANGEDEVICE, L"Change device (F2)", 35, iY += 24, 125, 22, VK_F2 );
g_SampleUI.SetCallback( OnGUIEvent );
g_SampleUI.SetFont( 1, L"Comic Sans MS", 24, FW_NORMAL );
g_SampleUI.SetFont( 2, L"Courier New", 16, FW_NORMAL );
// Static
g_SampleUI.AddStatic( IDC_STATIC, L"This is a static control.", 0, 0, 200, 30 );
g_SampleUI.AddStatic( IDC_OUTPUT,
L"This static control provides feedback for your action. It will change as you interact with the UI controls.", 20, 50, 620, 300 );
g_SampleUI.GetStatic( IDC_OUTPUT )->SetTextColor( D3DCOLOR_ARGB( 255, 255, 0, 0 ) ); // Change color to red
g_SampleUI.GetStatic( IDC_STATIC )->SetTextColor( D3DCOLOR_ARGB( 255, 0, 255, 0 ) ); // Change color to green
g_SampleUI.GetControl( IDC_OUTPUT )->GetElement( 0 )->dwTextFormat = DT_LEFT | DT_TOP | DT_WORDBREAK;
g_SampleUI.GetControl( IDC_OUTPUT )->GetElement( 0 )->iFont = 2;
g_SampleUI.GetControl( IDC_STATIC )->GetElement( 0 )->dwTextFormat = DT_CENTER | DT_VCENTER | DT_WORDBREAK;
// Buttons
g_SampleUI.AddButton( IDC_ENABLEIME, L"Enable (I)ME", 30, 390, 80, 35, L'I' );
g_SampleUI.AddButton( IDC_DISABLEIME, L"Disable I(M)E", 30, 430, 80, 35, L'M' );
// Edit box
g_SampleUI.AddEditBox( IDC_EDITBOX1, L"Edit control with default styles. Type text here and press Enter", 20, 440,
600, 32 );
// IME-enabled edit box
CDXUTIMEEditBox* pIMEEdit;
CDXUTIMEEditBox::InitDefaultElements( &g_SampleUI );
if( SUCCEEDED( CDXUTIMEEditBox::CreateIMEEditBox( &g_SampleUI, IDC_EDITBOX2,
L"IME-capable edit control with custom styles. Type and press Enter", 20, 390, 600, 45, false, &pIMEEdit ) ) )
{
g_SampleUI.AddControl( pIMEEdit );
pIMEEdit->GetElement( 0 )->iFont = 1;
pIMEEdit->GetElement( 1 )->iFont = 1;
pIMEEdit->GetElement( 9 )->iFont = 1;
pIMEEdit->GetElement( 0 )->TextureColor.Init( D3DCOLOR_ARGB( 128, 255, 255, 255 ) ); // Transparent center
pIMEEdit->SetBorderWidth( 7 );
pIMEEdit->SetTextColor( D3DCOLOR_ARGB( 255, 64, 64, 64 ) );
pIMEEdit->SetCaretColor( D3DCOLOR_ARGB( 255, 64, 64, 64 ) );
pIMEEdit->SetSelectedTextColor( D3DCOLOR_ARGB( 255, 255, 255, 255 ) );
pIMEEdit->SetSelectedBackColor( D3DCOLOR_ARGB( 255, 40, 72, 72 ) );
}
// Slider
g_SampleUI.AddSlider( IDC_SLIDER, 200, 450, 200, 24, 0, 100, 50, false );
// Checkbox
g_SampleUI.AddCheckBox( IDC_CHECKBOX, L"This is a checkbox with hotkey. Press 'C' to toggle the check state.",
170, 450, 350, 24, false, L'C', false );
g_SampleUI.AddCheckBox( IDC_CLEAREDIT,
L"This checkbox controls whether edit control text is cleared when Enter is pressed. (T)",
170, 460, 450, 24, false, L'T', false );
// Combobox
CDXUTComboBox* pCombo;
g_SampleUI.AddComboBox( IDC_COMBOBOX, 0, 0, 200, 24, L'O', false, &pCombo );
if( pCombo )
{
pCombo->SetDropHeight( 100 );
pCombo->AddItem( L"Combobox item (O)", ( LPVOID )0x11111111 );
pCombo->AddItem( L"Placeholder (O)", ( LPVOID )0x12121212 );
pCombo->AddItem( L"One more (O)", ( LPVOID )0x13131313 );
pCombo->AddItem( L"I can't get enough (O)", ( LPVOID )0x14141414 );
pCombo->AddItem( L"Ok, last one, I promise (O)", ( LPVOID )0x15151515 );
}
// Radio buttons
g_SampleUI.AddRadioButton( IDC_RADIO1A, 1, L"Radio group 1 Amy (1)", 0, 50, 220, 24, false, L'1' );
g_SampleUI.AddRadioButton( IDC_RADIO1B, 1, L"Radio group 1 Brian (2)", 0, 50, 220, 24, false, L'2' );
g_SampleUI.AddRadioButton( IDC_RADIO1C, 1, L"Radio group 1 Clark (3)", 0, 50, 220, 24, false, L'3' );
g_SampleUI.AddRadioButton( IDC_RADIO2A, 2, L"Single (4)", 0, 50, 90, 24, false, L'4' );
g_SampleUI.AddRadioButton( IDC_RADIO2B, 2, L"Double (5)", 0, 50, 90, 24, false, L'5' );
g_SampleUI.AddRadioButton( IDC_RADIO2C, 2, L"Triple (6)", 0, 50, 90, 24, false, L'6' );
// List box
g_SampleUI.AddListBox( IDC_LISTBOX, 30, 400, 200, 150, 0 );
for( int i = 0; i < 15; ++i )
{
WCHAR wszText[50];
swprintf_s( wszText, 50, L"Single-selection listbox item %d", i );
g_SampleUI.GetListBox( IDC_LISTBOX )->AddItem( wszText, ( LPVOID )( size_t )i );
}
g_SampleUI.AddListBox( IDC_LISTBOXM, 30, 400, 200, 150, CDXUTListBox::MULTISELECTION );
for( int i = 0; i < 30; ++i )
{
WCHAR wszText[50];
//.........这里部分代码省略.........