本文整理汇总了C++中CArray::setpart方法的典型用法代码示例。如果您正苦于以下问题：C++ CArray::setpart方法的具体用法？C++ CArray::setpart怎么用？C++ CArray::setpart使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类CArray的用法示例。
在下文中一共展示了CArray::setpart方法的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: assert
void
FT12LowLevelDriver::Send_Packet (CArray l)
{
CArray pdu;
uchar c;
unsigned i;
t->TracePacket (1, this, "Send", l);
assert (l () <= 32);
pdu.resize (l () + 7);
pdu[0] = 0x68;
pdu[1] = l () + 1;
pdu[2] = l () + 1;
pdu[3] = 0x68;
if (sendflag)
pdu[4] = 0x53;
else
pdu[4] = 0x73;
sendflag = !sendflag;
pdu.setpart (l.array (), 5, l ());
c = pdu[4];
for (i = 0; i < l (); i++)
c += l[i];
pdu[pdu () - 2] = c;
pdu[pdu () - 1] = 0x16;
inqueue.put (pdu);
pth_sem_set_value (&send_empty, 0);
pth_sem_inc (&in_signal, TRUE);
}示例2: die
int
main (int ac, char *ag[])
{
CArray p;
uchar buf[200];
int set = 0;
if (ac != 4)
die (_("%s input file output"), ag[0]);
{
FILE *f = fopen (ag[2], "r");
if (!f)
die (_("open of %s failed"), ag[1]);
while (!feof (f))
{
int i = fread (buf, 1, sizeof (buf), f);
p.setpart (buf, p (), i);
}
fclose (f);
}
xmlDocPtr f;
f = xmlParseFile (ag[1]);
if (!f)
die (_("can not parse %s"), ag[1]);
xmlNodePtr n = xmlDocGetRootElement (f);
if (n->type != XML_ELEMENT_NODE
|| (strcmp ((const char *) n->name, "DeviceConfig")
&& strcmp ((const char *) n->name, "DeviceDesc")))
die (_("wrong format"));
xmlNodePtr cld = n->children;
while (cld)
{
if (cld->type == XML_ELEMENT_NODE)
{
const char *name = (const char *) cld->name;
if (!strcmp (name, "ProgramID"))
{
setcontent (cld, p);
set = 1;
}
}
cld = cld->next;
}
if (!set)
die (_("ProgramID not found"));
if (xmlSaveFormatFileEnc (ag[3], f, "UTF-8", 1) < 0)
die (_("write to %s failed"), ag[3]);
xmlFreeDoc (f);
}示例3:
int
Layer7_Connection::X_Memory_Read_Block (memaddr_t addr, unsigned int len, CArray & erg)
{
unsigned blocksize = 12;
CArray e;
erg.resize (len);
for (unsigned i = 0; i < len; i += blocksize)
{
rt:
if (A_Memory_Read
(addr + i, (len - i > blocksize ? blocksize : len - i), e) == -1)
{
if (blocksize == 12)
{
blocksize = 2;
goto rt;
}
return -1;
}
erg.setpart (e, i);
}
return 0;
}示例4: if
void
BCU1SerialLowLevelDriver::Run (pth_sem_t * stop1)
{
pth_event_t stop = pth_event (PTH_EVENT_SEM, stop1);
pth_event_t input = pth_event (PTH_EVENT_SEM, &in_signal);
pth_event_t timeout = pth_event (PTH_EVENT_RTIME, pth_time (0, 10));
while (pth_event_status (stop) != PTH_STATUS_OCCURRED)
{
int error;
timeout =
pth_event (PTH_EVENT_RTIME | PTH_MODE_REUSE, timeout,
pth_time (0, 150));
pth_event_concat (stop, input, timeout, NULL);
pth_wait (stop);
pth_event_isolate (stop);
pth_event_isolate (input);
timeout =
pth_event (PTH_EVENT_RTIME | PTH_MODE_REUSE, timeout,
pth_time (0, 200));
pth_event_concat (stop, timeout, NULL);
struct timeval v1, v2;
gettimeofday (&v1, 0);
CArray e;
CArray r;
uchar s;
if (!inqueue.isempty ())
{
const CArray & c = inqueue.top ();
e.resize (c () + 1);
s = c () & 0x1f;
s |= 0x20;
s |= 0x80 * bitcount (s);
e[0] = s;
e.setpart (c, 1);
}
else
{
e.resize (1);
e[0] = 0xff;
}
if (!startsync ())
{
error = 1;
goto err;
}
if (!exchange (e[0], s, stop))
{
error = 3;
goto err;
}
if (!endsync ())
{
error = 2;
goto err;
}
if (s == 0xff && e[0] != 0xff)
{
for (unsigned i = 1; i < e (); i++)
{
if (!startsync ())
{
error = 1;
goto err;
}
if (!exchange (e[i], s, stop))
{
error = 3;
goto err;
}
if (endsync ())
{
error = 2;
goto err;
}
}
if (s != 0x00)
{
error = 10;
goto err;
}
inqueue.get ();
TRACEPRINTF (t, 0, this, "Sent");
pth_sem_dec (&in_signal);
if (inqueue.isempty ())
pth_sem_set_value (&send_empty, 1);
}
else if (s != 0xff)
{
r.resize ((s & 0x1f));
for (unsigned i = 0; i < (s & 0x1f); i++)
{
if (!startsync ())
{
error = 1;
goto err;
}
if (!exchange (0, r[i], stop))
{
//.........这里部分代码省略.........
示例5: if
void
FT12LowLevelDriver::Run (pth_sem_t * stop1)
{
CArray last;
int i;
uchar buf[255];
pth_event_t stop = pth_event (PTH_EVENT_SEM, stop1);
pth_event_t input = pth_event (PTH_EVENT_SEM, &in_signal);
pth_event_t timeout = pth_event (PTH_EVENT_RTIME, pth_time (0, 100000));
while (pth_event_status (stop) != PTH_STATUS_OCCURRED)
{
pth_event_isolate (input);
pth_event_isolate (timeout);
if (mode == 0)
pth_event_concat (stop, input, NULL);
if (mode == 1)
pth_event_concat (stop, timeout, NULL);
i = pth_read_ev (fd, buf, sizeof (buf), stop);
if (i > 0)
{
t->TracePacket (0, this, "Recv", i, buf);
akt.setpart (buf, akt (), i);
}
while (akt.len () > 0)
{
if (akt[0] == 0xE5 && mode == 1)
{
pth_sem_dec (&in_signal);
inqueue.get ();
if (inqueue.isempty ())
pth_sem_set_value (&send_empty, 1);
akt.deletepart (0, 1);
mode = 0;
repeatcount = 0;
}
else if (akt[0] == 0x10)
{
if (akt () < 4)
break;
if (akt[1] == akt[2] && akt[3] == 0x16)
{
uchar c1 = 0xE5;
t->TracePacket (0, this, "Send Ack", 1, &c1);
write (fd, &c1, 1);
if ((akt[1] == 0xF3 && !recvflag) ||
(akt[1] == 0xD3 && recvflag))
{
//right sequence number
recvflag = !recvflag;
}
if ((akt[1] & 0x0f) == 0)
{
const uchar reset[1] = { 0xA0 };
CArray *c = new CArray (reset, sizeof (reset));
t->TracePacket (0, this, "RecvReset", *c);
outqueue.put (c);
pth_sem_inc (&out_signal, TRUE);
}
}
akt.deletepart (0, 4);
}
else if (akt[0] == 0x68)
{
int len;
uchar c1;
if (akt () < 7)
break;
if (akt[1] != akt[2] || akt[3] != 0x68)
{
//receive error, try to resume
akt.deletepart (0, 1);
continue;
}
if (akt () < akt[1] + 6)
break;
c1 = 0;
for (i = 4; i < akt[1] + 4; i++)
c1 += akt[i];
if (akt[akt[1] + 4] != c1 || akt[akt[1] + 5] != 0x16)
{
len = akt[1] + 6;
//Forget wrong short frame
akt.deletepart (0, len);
continue;
}
c1 = 0xE5;
t->TracePacket (0, this, "Send Ack", 1, &c1);
i = write (fd, &c1, 1);
if ((akt[4] == 0xF3 && recvflag) ||
(akt[4] == 0xD3 && !recvflag))
{
if (CArray (akt.array () + 5, akt[1] - 1) != last)
{
TRACEPRINTF (t, 0, this, "Sequence jump");
//.........这里部分代码省略.........