当前位置: 首页>>代码示例>>C++>>正文

C++ CArray::array方法代码示例

本文整理汇总了C++中CArray::array方法的典型用法代码示例。如果您正苦于以下问题：C++ CArray::array方法的具体用法？C++ CArray::array怎么用？C++ CArray::array使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类CArray的用法示例。


在下文中一共展示了CArray::array方法的8个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: while

int
Layer7_Connection::X_Memory_Write_Block (memaddr_t addr, const CArray & data)
{
  CArray prev;
  unsigned int i, j;
  int k, res = 0;
  const unsigned blocksize = 12;
  if (X_Memory_Read_Block (addr, data (), prev) == -1)
    return -1;
  for (i = 0; i < data (); i++)
    {
      if (data[i] == prev[i])
	continue;
      j = 0;
      while (data[i + j] != prev[i + j] && j < blocksize && i + j < data ())
	j++;
      k = X_Memory_Write (addr + i, CArray (data.array () + i, j));
      if (k == -1)
	return -1;
      if (k == -2)
	res = -2;
      i += j - 1;
    }

  return res;
}
开发者ID:1stsetup，项目名称:knxd，代码行数:26，代码来源:layer7.cpp

示例2: assert

void
FT12LowLevelDriver::Send_Packet (CArray l)
{
  CArray pdu;
  uchar c;
  unsigned i;
  t->TracePacket (1, this, "Send", l);

  assert (l () <= 32);
  pdu.resize (l () + 7);
  pdu[0] = 0x68;
  pdu[1] = l () + 1;
  pdu[2] = l () + 1;
  pdu[3] = 0x68;
  if (sendflag)
    pdu[4] = 0x53;
  else
    pdu[4] = 0x73;
  sendflag = !sendflag;

  pdu.setpart (l.array (), 5, l ());
  c = pdu[4];
  for (i = 0; i < l (); i++)
    c += l[i];
  pdu[pdu () - 2] = c;
  pdu[pdu () - 1] = 0x16;

  inqueue.put (pdu);
  pth_sem_set_value (&send_empty, 0);
  pth_sem_inc (&in_signal, TRUE);
}
开发者ID:AdrienCourtois，项目名称:Domoleaf，代码行数:31，代码来源:ft12.cpp

示例3: data

int
Layer7_Connection::A_Memory_Write (memaddr_t addr, const CArray & data)
{
  A_Memory_Write_PDU r;
  r.addr = addr;
  r.count = data () & 0x0f;
  r.data.set (data.array (), data () & 0x0f);
  l4->Send (r.ToPacket ());
  return 0;
}
开发者ID:1stsetup，项目名称:knxd，代码行数:10，代码来源:layer7.cpp

示例4: switch

CArray *
USBConverterInterface::Get_Packet (pth_event_t stop)
{
  CArray *res1 = i->Get_Packet (stop);
  if (res1)
    {
      CArray res = *res1;
      if (res () != 64)
	goto out;
      if (res[0] != 0x01)
	goto out;
      if ((res[1] & 0x0f) != 3)
	goto out;
      if (res[2] > 64 - 8)
	goto out;
      if (res[3] != 0)
	goto out;
      if (res[4] != 8)
	goto out;
      if (res[5] != 0)
	goto out;
      if (res[6] + 11 > 64)
	goto out;
      if (res[7] != 1)
	goto out;
      switch (v)
	{
	case vEMI1:
	  if (res[8] != 1)
	    goto out;
	  break;
	case vEMI2:
	  if (res[8] != 2)
	    goto out;
	  break;
	case vCEMI:
	  if (res[8] != 3)
	    goto out;
	  break;
	default:
	  goto out;
	}
      res1->set (res.array () + 11, res[6]);
      t->TracePacket (0, this, "RecvEMI", *res1);
    }
  return res1;

out:
  delete res1;
  return 0;
}
开发者ID:1stsetup，项目名称:knxd，代码行数:51，代码来源:eibusb.cpp

示例5: data

int
Layer7_Connection::A_Memory_Write_Block (memaddr_t addr, const CArray & data)
{
  CArray prev;
  int i, j, k, res = 0;
  const unsigned blocksize = 12;

  for (i = 0; i < data (); i += blocksize)
    {
      j = blocksize;
      if (i + j > data ())
	j = data () - i;
      k = A_Memory_Write (addr + i, CArray (data.array () + i, j));
      if (k == -1)
	return -1;
    }

  return res;
}
开发者ID:AdrienCourtois，项目名称:Domoleaf，代码行数:19，代码来源:layer7.cpp

示例6: while

void
TPUARTLayer2Driver::Run (pth_sem_t * stop1)
{
  struct message m;
  int l;
  pth_event_t stop = pth_event (PTH_EVENT_SEM, stop1);
  pth_event_t input = pth_event (PTH_EVENT_SEM, &in_signal);
  while (pth_event_status (stop) != PTH_STATUS_OCCURRED)
    {
      pth_event_concat (stop, input, NULL);
      l = pth_read_ev (fd, &m, sizeof (m), stop);
      if (l >= 0)
	{
	  LPDU *l1;
	  if (m.length > sizeof (m.data))
	    m.length = sizeof (m.data);
	  t->TracePacket (0, this, "Recv", m.length, m.data);
	  if (vmode && mode == 0)
	    {
	      L_Busmonitor_PDU *l2 = new L_Busmonitor_PDU;
	      l2->pdu.set (m.data, m.length);
	      outqueue.put (l2);
	      pth_sem_inc (&out_signal, 1);
	    }
	  if (mode == 0)
	    l1 = LPDU::fromPacket (CArray (m.data, m.length));
	  else
	    {
	      l1 = new L_Busmonitor_PDU;
	      ((L_Busmonitor_PDU *) l1)->pdu.set (m.data, m.length);
	    }
	  outqueue.put (l1);
	  pth_sem_inc (&out_signal, 1);
	}
      pth_event_isolate (stop);
      if (!inqueue.isempty ())
	{
	  LPDU *l1 = inqueue.top ();
	  CArray c = l1->ToPacket ();
	  unsigned len = c ();
	  if (len > sizeof (m.data))
	    len = sizeof (m.data);
	  memcpy (m.data, c.array (), len);
	  m.length = len;
	  if (ver)
	    m.length--;
	  t->TracePacket (0, this, "Send", m.length, m.data);
	  l = pth_write_ev (fd, &m, sizeof (m), stop);
	  if (l >= 0)
	    {
	      if (vmode)
		{
		  L_Busmonitor_PDU *l2 = new L_Busmonitor_PDU;
		  l2->pdu.set (c);
		  outqueue.put (l2);
		  pth_sem_inc (&out_signal, 1);
		}
	      pth_sem_dec (&in_signal);
	      delete inqueue.get ();
	    }
	}
    }
  pth_event_free (stop, PTH_FREE_THIS);
  pth_event_free (input, PTH_FREE_THIS);
}
开发者ID:AdrienCourtois，项目名称:Domoleaf，代码行数:65，代码来源:tpuart.cpp

示例7: while

void
EMI1Layer2::Run (pth_sem_t * stop1)
{
  pth_event_t stop = pth_event (PTH_EVENT_SEM, stop1);
  pth_event_t input = pth_event (PTH_EVENT_SEM, &in_signal);
  pth_event_t timeout = pth_event (PTH_EVENT_RTIME, pth_time (0, 0));
  bool wait_confirm = false;
  while (pth_event_status (stop) != PTH_STATUS_OCCURRED)
    {
      if (!wait_confirm)
	pth_event_concat (stop, input, NULL);
      if (wait_confirm)
	pth_event_concat (stop, timeout, NULL);
      CArray *c = iface->Get_Packet (stop);
      pth_event_isolate(input);
      pth_event_isolate(timeout);
      if (!wait_confirm && !inqueue.isempty())
	{
	  pth_sem_dec (&in_signal);	
	  Send(inqueue.get());
	  if (noqueue)
	    {
	      pth_event (PTH_EVENT_RTIME | PTH_MODE_REUSE, timeout,
			 pth_time (1, 0));
	      wait_confirm = true;
	    }
	}
      if (wait_confirm && pth_event_status(timeout) == PTH_STATUS_OCCURRED)
	wait_confirm = false;
      if (!c)
	continue;
      if (c->len () == 1 && (*c)[0] == 0xA0 && (mode & BUSMODE_UP))
	{
	  TRACEPRINTF (t, 2, this, "Reopen");
          busmode_t old_mode = mode;
	  mode = BUSMODE_DOWN;
	  if (Open ())
            mode = old_mode; // restore VMONITOR
	}
      if (c->len () == 1 && (*c)[0] == 0xA0 && mode == BUSMODE_MONITOR)
	{
	  TRACEPRINTF (t, 2, this, "Reopen Busmonitor");
	  mode = BUSMODE_DOWN;
	  enterBusmonitor ();
	}
      if (c->len () && (*c)[0] == 0x4E)
	wait_confirm = false;
      if (c->len () && (*c)[0] == 0x49 && (mode & BUSMODE_UP))
	{
	  L_Data_PDU *p = EMI_to_L_Data (*c, this);
	  if (p)
	    {
	      delete c;
	      if (p->AddrType == IndividualAddress)
		p->dest = 0;
	      TRACEPRINTF (t, 2, this, "Recv %s", p->Decode ()());
	      if (mode == BUSMODE_VMONITOR)
		{
		  L_Busmonitor_PDU *l2 = new L_Busmonitor_PDU (this);
		  l2->pdu.set (p->ToPacket ());
		  l3->recv_L_Data (l2);
		}
	      l3->recv_L_Data (p);
	      continue;
	    }
	}
      if (c->len () > 4 && (*c)[0] == 0x49 && mode == BUSMODE_MONITOR)
	{
	  L_Busmonitor_PDU *p = new L_Busmonitor_PDU (this);
	  p->status = (*c)[1];
	  p->timestamp = ((*c)[2] << 24) | ((*c)[3] << 16);
	  p->pdu.set (c->array () + 4, c->len () - 4);
	  delete c;
	  TRACEPRINTF (t, 2, this, "Recv %s", p->Decode ()());
	  l3->recv_L_Data (p);
	  continue;
	}
      delete c;
    }
  pth_event_free (stop, PTH_FREE_THIS);
  pth_event_free (input, PTH_FREE_THIS);
  pth_event_free (timeout, PTH_FREE_THIS);
}
开发者ID:1stsetup，项目名称:knxd，代码行数:83，代码来源:emi1.cpp

示例8: xmlNodeSetContent

void
setcontent (xmlNodePtr n, CArray data)
{
  CArray d = encode_hex (data);
  xmlNodeSetContent (n, (const xmlChar *) d.array ());
}
开发者ID:AdrienCourtois，项目名称:Domoleaf，代码行数:6，代码来源:embedprogid.cpp


注：本文中的CArray::array方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。