本文整理汇总了C++中ArRobot::setStateReflectionRefreshTime方法的典型用法代码示例。如果您正苦于以下问题：C++ ArRobot::setStateReflectionRefreshTime方法的具体用法？C++ ArRobot::setStateReflectionRefreshTime怎么用？C++ ArRobot::setStateReflectionRefreshTime使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类ArRobot的用法示例。
在下文中一共展示了ArRobot::setStateReflectionRefreshTime方法的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: main
int main(void)
{
ArSerialConnection con;
ArRobot robot;
int ret;
std::string str;
ArActionLimiterForwards limiter("speed limiter near", 300, 600, 250);
ArActionLimiterForwards limiterFar("speed limiter far", 300, 1100, 400);
ArActionLimiterBackwards backwardsLimiter;
ArActionConstantVelocity stop("stop", 0);
ArActionConstantVelocity backup("backup", -200);
ArSonarDevice sonar;
ArACTS_1_2 acts;
ArSonyPTZ sony(&robot);
ArGripper gripper(&robot, ArGripper::GENIO);
Acquire acq(&acts, &gripper);
DriveTo driveTo(&acts, &gripper, &sony);
PickUp pickUp(&acts, &gripper, &sony);
TakeBlockToWall takeBlock(&robot, &gripper, &sony, &acq, &driveTo, &pickUp,
&backup);
Aria::init();
if (!acts.openPort(&robot))
{
printf("Could not connect to acts\n");
exit(1);
}
robot.addRangeDevice(&sonar);
//con.setBaud(38400);
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
robot.setDeviceConnection(&con);
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
sony.init();
ArUtil::sleep(1000);
//robot.setAbsoluteMaxTransVel(400);
robot.setStateReflectionRefreshTime(250);
robot.comInt(ArCommands::ENABLE, 1);
robot.comInt(ArCommands::SOUNDTOG, 0);
ArUtil::sleep(200);
robot.addAction(&limiter, 100);
robot.addAction(&limiterFar, 99);
robot.addAction(&backwardsLimiter, 98);
robot.addAction(&acq, 77);
robot.addAction(&driveTo, 76);
robot.addAction(&pickUp, 75);
robot.addAction(&backup, 50);
robot.addAction(&stop, 30);
robot.run(true);
Aria::shutdown();
return 0;
}示例2: main
int main(void)
{
ArSerialConnection con;
ArRobot robot;
int ret;
std::string str;
ArActionLimiterForwards limiter("speed limiter near", 225, 600, 250);
ArActionLimiterForwards limiterFar("speed limiter far", 225, 1100, 400);
ArActionTableSensorLimiter tableLimiter;
ArActionLimiterBackwards backwardsLimiter;
ArActionConstantVelocity stop("stop", 0);
ArSonarDevice sonar;
ArACTS_1_2 acts;
ArPTZ *ptz;
ptz = new ArVCC4(&robot, true);
ArGripper gripper(&robot);
Acquire acq(&acts, &gripper);
DriveTo driveTo(&acts, &gripper, ptz);
DropOff dropOff(&acts, &gripper, ptz);
PickUp pickUp(&acts, &gripper, ptz);
TakeBlockToWall takeBlock(&robot, &gripper, ptz, &acq, &driveTo, &pickUp,
&dropOff, &tableLimiter);
if (!acts.openPort(&robot))
{
printf("Could not connect to acts, exiting\n");
exit(0);
}
Aria::init();
robot.addRangeDevice(&sonar);
//con.setBaud(38400);
if ((ret = con.open()) != 0)
{
str = con.getOpenMessage(ret);
printf("Open failed: %s\n", str.c_str());
Aria::shutdown();
return 1;
}
robot.setDeviceConnection(&con);
if (!robot.blockingConnect())
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
ptz->init();
ArUtil::sleep(8000);
printf("### 2222\n");
ptz->panTilt(0, -40);
printf("### whee\n");
ArUtil::sleep(8000);
robot.setAbsoluteMaxTransVel(400);
robot.setStateReflectionRefreshTime(250);
robot.comInt(ArCommands::ENABLE, 1);
robot.comInt(ArCommands::SOUNDTOG, 0);
ArUtil::sleep(200);
robot.addAction(&tableLimiter, 100);
robot.addAction(&limiter, 99);
robot.addAction(&limiterFar, 98);
robot.addAction(&backwardsLimiter, 97);
robot.addAction(&acq, 77);
robot.addAction(&driveTo, 76);
robot.addAction(&pickUp, 75);
robot.addAction(&dropOff, 74);
robot.addAction(&stop, 30);
robot.run(true);
Aria::shutdown();
return 0;
}示例3: main
int main(int argc, char **argv)
{
// robot
ArRobot robot;
// the laser
ArSick sick;
// sonar, must be added to the robot
//ArSonarDevice sonar;
// the actions we'll use to wander
// recover from stalls
//ArActionStallRecover recover;
// react to bumpers
//ArActionBumpers bumpers;
// limiter for close obstacles
ArActionLimiterForwards limiter("speed limiter near", 1600, 0, 0, 1.3);
// limiter for far away obstacles
//ArActionLimiterForwards limiterFar("speed limiter near", 300, 1000, 450, 1.1);
//ArActionLimiterForwards limiterFar("speed limiter far", 300, 1100, 600, 1.1);
// limiter for the table sensors
//ArActionLimiterTableSensor tableLimiter;
// actually move the robot
ArActionConstantVelocity constantVelocity("Constant Velocity", 1500);
// turn the orbot if its slowed down
ArActionTurn turn;
// mandatory init
Aria::init();
// Parse all our args
ArSimpleConnector connector(&argc, argv);
if (!connector.parseArgs() || argc > 1)
{
connector.logOptions();
exit(1);
}
// add the sonar to the robot
//robot.addRangeDevice(&sonar);
// add the laser to the robot
robot.addRangeDevice(&sick);
// try to connect, if we fail exit
if (!connector.connectRobot(&robot))
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
robot.comInt(ArCommands::SONAR, 0);
// turn on the motors, turn off amigobot sounds
//robot.comInt(ArCommands::SONAR, 0);
robot.comInt(ArCommands::SOUNDTOG, 0);
// add the actions
//robot.addAction(&recover, 100);
//robot.addAction(&bumpers, 75);
robot.addAction(&limiter, 49);
//robot.addAction(&limiter, 48);
//robot.addAction(&tableLimiter, 50);
robot.addAction(&turn, 30);
robot.addAction(&constantVelocity, 20);
robot.setStateReflectionRefreshTime(50);
limiter.activate();
turn.activate();
constantVelocity.activate();
robot.clearDirectMotion();
//robot.setStateReflectionRefreshTime(50);
robot.setRotVelMax(50);
robot.setTransAccel(1500);
robot.setTransDecel(100);
// start the robot running, true so that if we lose connection the run stops
robot.runAsync(true);
connector.setupLaser(&sick);
// now that we're connected to the robot, connect to the laser
sick.runAsync();
if (!sick.blockingConnect())
{
printf("Could not connect to SICK laser... exiting\n");
Aria::shutdown();
return 1;
}
sick.lockDevice();
sick.setMinRange(250);
sick.unlockDevice();
robot.lock();
ArGlobalFunctor1<ArRobot *> userTaskCB(&userTask, &robot);
robot.addUserTask("iotest", 100, &userTaskCB);
requestTime.setToNow();
//.........这里部分代码省略.........