Python Wlantest.setup方法代码示例

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_ocv_sa_query(dev, apdev):
    """Test SA Query with OCV"""
    ssid = "test-pmf-required"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
    params["ieee80211w"] = "2"
    params["ocv"] = "1"
    try:
        hapd = hostapd.add_ap(apdev[0], params)
    except Exception as e:
        if "Failed to set hostapd parameter ocv" in str(e):
            raise HwsimSkip("OCV not supported")
        raise
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    dev[0].connect(ssid, psk="12345678", ieee80211w="1", ocv="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")

    # Test that client can handle SA Query with OCI element
    if "OK" not in hapd.request("SA_QUERY " + dev[0].own_addr()):
        raise Exception("SA_QUERY failed")
    time.sleep(0.1)
    if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
                          dev[0].own_addr()) < 1:
        raise Exception("STA did not reply to SA Query")

    # Test that AP can handle SA Query with OCI element
    if "OK" not in dev[0].request("UNPROT_DEAUTH"):
        raise Exception("Triggering SA Query from the STA failed")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=3)
    if ev is not None:
        raise Exception("SA Query from the STA failed")

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_ap_pmf_optional_2akm(dev, apdev):
    """WPA2-PSK AP with PMF optional (2 AKMs)"""
    ssid = "test-pmf-optional-2akm"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK WPA-PSK-SHA256"
    params["ieee80211w"] = "1"
    hapd = hostapd.add_ap(apdev[0], params)
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    hwsim_utils.test_connectivity(dev[0], hapd)
    dev[1].connect(ssid, psk="12345678", ieee80211w="2",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")
    hwsim_utils.test_connectivity(dev[1], hapd)
    wt.require_ap_pmf_optional(apdev[0]['bssid'])
    wt.require_sta_pmf(apdev[0]['bssid'], dev[0].p2p_interface_addr())
    wt.require_sta_key_mgmt(apdev[0]['bssid'], dev[0].p2p_interface_addr(),
                            "PSK-SHA256")
    wt.require_sta_pmf_mandatory(apdev[0]['bssid'], dev[1].p2p_interface_addr())
    wt.require_sta_key_mgmt(apdev[0]['bssid'], dev[1].p2p_interface_addr(),
                            "PSK-SHA256")

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_peerkey_pairwise_mismatch(dev, apdev):
    """RSN TKIP+CCMP AP and PeerKey between two STAs using different ciphers"""
    skip_with_fips(dev[0])
    ssid = "test-peerkey"
    passphrase = "12345678"
    params = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
    params['peerkey'] = "1"
    params['rsn_pairwise'] = "TKIP CCMP"
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True,
                   pairwise="CCMP")
    dev[1].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True,
                   pairwise="TKIP")
    hwsim_utils.test_connectivity_sta(dev[0], dev[1])

    dev[0].request("STKSTART " + dev[1].p2p_interface_addr())
    time.sleep(0.5)
    dev[1].request("STKSTART " + dev[0].p2p_interface_addr())
    time.sleep(0.5)

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_ap_wpa2_delayed_m1_m3_zero_tk(dev, apdev):
    """Delayed M1+M3 retransmission and zero TK"""
    params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect("test-wpa2-psk", psk="12345678", scan_freq="2412")

    hwsim_utils.test_connectivity(dev[0], hapd)
    addr = dev[0].own_addr()
    if "OK" not in hapd.request("RESEND_M1 " + addr + " change-anonce"):
        raise Exception("RESEND_M1 failed")
    if "OK" not in hapd.request("RESEND_M1 " + addr):
        raise Exception("RESEND_M1 failed")
    if "OK" not in hapd.request("RESEND_M3 " + addr):
        raise Exception("RESEND_M3 failed")

    if "OK" not in hapd.request("SET_KEY 3 %s %d %d %s %s" % (addr, 0, 1, 6*"00", 16*"00")):
        raise Exception("SET_KEY failed")
    time.sleep(0.1)
    hwsim_utils.test_connectivity(dev[0], hapd, timeout=1, broadcast=False,
                                  success_expected=False)
    dev[0].request("DISCONNECT")
    dev[0].wait_disconnected()

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def check_group_mgmt_cipher(dev, ap, cipher, sta_req_cipher=None):
    if cipher not in dev.get_capability("group_mgmt"):
        raise HwsimSkip("Cipher %s not supported" % cipher)
    params = { "ssid": "test-wpa2-psk-pmf",
               "wpa_passphrase": "12345678",
               "wpa": "2",
               "ieee80211w": "2",
               "wpa_key_mgmt": "WPA-PSK-SHA256",
               "rsn_pairwise": "CCMP",
               "group_mgmt_cipher": cipher }
    hapd = hostapd.add_ap(ap, params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev.connect("test-wpa2-psk-pmf", psk="12345678", ieee80211w="2",
                key_mgmt="WPA-PSK-SHA256", group_mgmt=sta_req_cipher,
                pairwise="CCMP", group="CCMP", scan_freq="2412")
    hwsim_utils.test_connectivity(dev, hapd)
    hapd.request("DEAUTHENTICATE ff:ff:ff:ff:ff:ff")
    dev.wait_disconnected()
    if wt.get_bss_counter('valid_bip_mmie', ap['bssid']) < 1:
        raise Exception("No valid BIP MMIE seen")
    if wt.get_bss_counter('bip_deauth', ap['bssid']) < 1:
        raise Exception("No valid BIP deauth seen")

    if cipher == "AES-128-CMAC":
        group_mgmt = "BIP"
    else:
        group_mgmt = cipher
    res =  wt.info_bss('group_mgmt', ap['bssid']).strip()
    if res != group_mgmt:
        raise Exception("Unexpected group mgmt cipher: " + res)

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_ocv_sa_query_csa(dev, apdev):
    """Test SA Query with OCV after channel switch"""
    ssid = "test-pmf-required"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
    params["ieee80211w"] = "2"
    params["ocv"] = "1"
    try:
        hapd = hostapd.add_ap(apdev[0], params)
    except Exception as e:
        if "Failed to set hostapd parameter ocv" in str(e):
            raise HwsimSkip("OCV not supported")
        raise
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    dev[0].connect(ssid, psk="12345678", ieee80211w="1", ocv="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")

    hapd.request("CHAN_SWITCH 5 2437")
    time.sleep(1)
    if wt.get_sta_counter("valid_saqueryreq_tx", apdev[0]['bssid'],
                          dev[0].own_addr()) < 1:
        raise Exception("STA did not start SA Query after channel switch")

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_autogo_tdls(dev):
    """P2P autonomous GO and two clients using TDLS"""
    go = dev[0]
    logger.info("Start autonomous GO with fixed parameters " + go.ifname)
    id = go.add_network()
    go.set_network_quoted(id, "ssid", "DIRECT-tdls")
    go.set_network_quoted(id, "psk", "12345678")
    go.set_network(id, "mode", "3")
    go.set_network(id, "disabled", "2")
    res = go.p2p_start_go(persistent=id, freq="2462")
    logger.debug("res: " + str(res))
    Wlantest.setup(go, True)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    connect_cli(go, dev[1], social=True, freq=2462)
    connect_cli(go, dev[2], social=True, freq=2462)
    hwsim_utils.test_connectivity_p2p(dev[1], dev[2])
    bssid = dev[0].p2p_interface_addr()
    addr1 = dev[1].p2p_interface_addr()
    addr2 = dev[2].p2p_interface_addr()
    dev[1].tdls_setup(addr2)
    time.sleep(1)
    hwsim_utils.test_connectivity_p2p(dev[1], dev[2])
    conf = wt.get_tdls_counter("setup_conf_ok", bssid, addr1, addr2)
    if conf == 0:
        raise Exception("No TDLS Setup Confirm (success) seen")
    dl = wt.get_tdls_counter("valid_direct_link", bssid, addr1, addr2)
    if dl == 0:
        raise Exception("No valid frames through direct link")
    wt.tdls_clear(bssid, addr1, addr2)
    dev[1].tdls_teardown(addr2)
    time.sleep(1)
    teardown = wt.get_tdls_counter("teardown", bssid, addr1, addr2)
    if teardown == 0:
        raise Exception("No TDLS Setup Teardown seen")
    wt.tdls_clear(bssid, addr1, addr2)
    hwsim_utils.test_connectivity_p2p(dev[1], dev[2])
    ap_path = wt.get_tdls_counter("valid_ap_path", bssid, addr1, addr2)
    if ap_path == 0:
        raise Exception("No valid frames via AP path")
    direct_link = wt.get_tdls_counter("valid_direct_link", bssid, addr1, addr2)
    if direct_link > 0:
        raise Exception("Unexpected frames through direct link")
    idirect_link = wt.get_tdls_counter("invalid_direct_link", bssid, addr1,
                                       addr2)
    if idirect_link > 0:
        raise Exception("Unexpected frames through direct link (invalid)")
    dev[2].remove_group()
    dev[1].remove_group()
    dev[0].remove_group()

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def run_ap_wpa2_delayed_m1_m3_retransmission(dev, apdev,
                                             change_m1_anonce=False):
    params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    phy = dev[0].get_driver_status_field("phyname")
    dev[0].connect("test-wpa2-psk", psk="12345678", scan_freq="2412")

    for i in range(5):
        hwsim_utils.test_connectivity(dev[0], hapd)

    time.sleep(0.1)
    before_tk = get_rx_spec(phy, gtk=False).splitlines()
    before_gtk = get_rx_spec(phy, gtk=True).splitlines()
    addr = dev[0].own_addr()
    if change_m1_anonce:
        if "OK" not in hapd.request("RESEND_M1 " + addr + " change-anonce"):
            raise Exception("RESEND_M1 failed")
    if "OK" not in hapd.request("RESEND_M1 " + addr):
        raise Exception("RESEND_M1 failed")
    if "OK" not in hapd.request("RESEND_M3 " + addr):
        raise Exception("RESEND_M3 failed")
    time.sleep(0.1)
    after_tk = get_rx_spec(phy, gtk=False).splitlines()
    after_gtk = get_rx_spec(phy, gtk=True).splitlines()

    if "OK" not in hapd.request("RESET_PN " + addr):
        raise Exception("RESET_PN failed")
    time.sleep(0.1)
    hwsim_utils.test_connectivity(dev[0], hapd, timeout=1,
                                  success_expected=False)
    dev[0].request("DISCONNECT")
    dev[0].wait_disconnected()

    for i in range(len(before_tk)):
        b = int(before_tk[i], 16)
        a = int(after_tk[i], 16)
        if a < b:
            raise Exception("TK RX counter decreased: idx=%d before=%d after=%d" % (i, b, a))

    for i in range(len(before_gtk)):
        b = int(before_gtk[i], 16)
        a = int(after_gtk[i], 16)
        if a < b:
            raise Exception("GTK RX counter decreased: idx=%d before=%d after=%d" % (i, b, a))

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_ap_qosmap_default(dev, apdev):
    """QoS mapping with default values"""
    ssid = "test-qosmap-default"
    params = { "ssid": ssid }
    hapd = hostapd.add_ap(apdev[0], params)
    dev[0].connect(ssid, key_mgmt="NONE", scan_freq="2412")
    addr = dev[0].p2p_interface_addr()
    dev[0].request("DATA_TEST_CONFIG 1")
    hapd.request("DATA_TEST_CONFIG 1")
    Wlantest.setup(hapd)
    for dscp in [ 0, 7, 8, 15, 16, 23, 24, 31, 32, 39, 40, 47, 48, 55, 56, 63]:
        check_qos_map(apdev[0], hapd, dev[0], addr, dscp, dscp >> 3)
    dev[0].request("DATA_TEST_CONFIG 0")
    hapd.request("DATA_TEST_CONFIG 0")

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def _test_ap_pmf_toggle(dev, apdev):
    ssid = "test-pmf-optional"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK"
    params["ieee80211w"] = "1"
    params["assoc_sa_query_max_timeout"] = "1"
    params["assoc_sa_query_retry_timeout"] = "1"
    hapd = hostapd.add_ap(apdev[0], params)
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    bssid = apdev[0]['bssid']
    addr = dev[0].own_addr()
    dev[0].request("SET reassoc_same_bss_optim 1")
    id = dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                        key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                        scan_freq="2412")
    wt.require_ap_pmf_optional(bssid)
    wt.require_sta_pmf(bssid, addr)
    sta = hapd.get_sta(addr)
    if '[MFP]' not in sta['flags']:
        raise Exception("MFP flag not present for STA")

    dev[0].set_network(id, "ieee80211w", "0")
    dev[0].request("REASSOCIATE")
    dev[0].wait_connected()
    wt.require_sta_no_pmf(bssid, addr)
    sta = hapd.get_sta(addr)
    if '[MFP]' in sta['flags']:
        raise Exception("MFP flag unexpectedly present for STA")
    err, data = hapd.cmd_execute(['iw', 'dev', apdev[0]['ifname'], 'station',
                                  'get', addr])
    if "yes" in [l for l in data.splitlines() if "MFP" in l][0]:
        raise Exception("Kernel STA entry had MFP enabled")

    dev[0].set_network(id, "ieee80211w", "1")
    dev[0].request("REASSOCIATE")
    dev[0].wait_connected()
    wt.require_sta_pmf(bssid, addr)
    sta = hapd.get_sta(addr)
    if '[MFP]' not in sta['flags']:
        raise Exception("MFP flag not present for STA")
    err, data = hapd.cmd_execute(['iw', 'dev', apdev[0]['ifname'], 'station',
                                  'get', addr])
    if "yes" not in [l for l in data.splitlines() if "MFP" in l][0]:
        raise Exception("Kernel STA entry did not have MFP enabled")

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_ap_pmf_sta_unprot_deauth_burst(dev, apdev):
    """WPA2-PSK AP with station receiving burst of unprotected Deauthentication frames"""
    ssid = "deauth-attack"
    addr = dev[0].own_addr()

    wpas = start_wpas_ap(ssid)
    bssid = wpas.own_addr()

    Wlantest.setup(wpas)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect(ssid, psk="12345678", ieee80211w="1",
                   key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
                   scan_freq="2412")

    for i in range(0, 10):
        wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
        wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")
    num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
    num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
    if num_req < 1:
        raise Exception("STA did not send SA Query")
    if num_resp < 1:
        raise Exception("AP did not reply to SA Query")
    if num_req > 1:
        raise Exception("STA initiated too many SA Query procedures (%d)" % num_req)

    time.sleep(10)
    for i in range(0, 5):
        wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
        wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
    ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
    if ev is not None:
        raise Exception("Unexpected disconnection")
    num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
    num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
    if num_req != 2 or num_resp != 2:
        raise Exception("Unexpected number of SA Query procedures (req=%d resp=%d)" % (num_req, num_resp))

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_peerkey_sniffer_check(dev, apdev, params):
    """RSN AP and PeerKey between two STAs with sniffer check"""
    ssid = "test-peerkey"
    passphrase = "12345678"
    hparams = hostapd.wpa2_params(ssid=ssid, passphrase=passphrase)
    hparams['peerkey'] = "1"
    hapd = hostapd.add_ap(apdev[0], hparams)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True)
    dev[1].connect(ssid, psk=passphrase, scan_freq="2412", peerkey=True)
    hwsim_utils.test_connectivity_sta(dev[0], dev[1])

    dev[0].request("STKSTART " + dev[1].p2p_interface_addr())
    time.sleep(1)
    # NOTE: Actual use of the direct link (DLS) is not supported in
    # mac80211_hwsim, so this operation fails at setting the keys after
    # successfully completed 4-way handshake. This test case does allow the
    # key negotiation part to be tested for coverage, though. Use sniffer to
    # verify that all the SMK and STK handshake messages were transmitted.

    bssid = hapd.own_addr()
    addr0 = dev[0].own_addr()
    addr1 = dev[1].own_addr()

    # Wireshark renamed the EAPOL-Key key_info field, so need to try both the
    # new and the old name to work with both versions.
    try_other = False
    try:
        out = run_tshark(os.path.join(params['logdir'], "hwsim0.pcapng"),
                         "eapol.type == 3",
                         display=["wlan.sa", "wlan.da",
                                  "wlan_rsna_eapol.keydes.key_info"])
    except Exception, e:
        if "Unknown tshark field" in str(e):
            try_other = True
            pass
        else:
            raise

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_ap_pmf_required_sha1(dev, apdev):
    """WPA2-PSK AP with PMF required with SHA1 AKM"""
    ssid = "test-pmf-required-sha1"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK"
    params["ieee80211w"] = "2"
    hapd = hostapd.add_ap(apdev[0], params)
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    key_mgmt = hapd.get_config()['key_mgmt']
    if key_mgmt.split(' ')[0] != "WPA-PSK":
        raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
    dev[0].connect(ssid, psk="12345678", ieee80211w="2",
                   key_mgmt="WPA-PSK", proto="WPA2", scan_freq="2412")
    if "[WPA2-PSK-CCMP]" not in dev[0].request("SCAN_RESULTS"):
        raise Exception("Scan results missing RSN element info")
    hwsim_utils.test_connectivity(dev[0], hapd)

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_ap_pmf_assoc_comeback2(dev, apdev):
    """WPA2-PSK AP with PMF association comeback (using DROP_SA)"""
    ssid = "assoc-comeback"
    params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
    params["wpa_key_mgmt"] = "WPA-PSK"
    params["ieee80211w"] = "1"
    hapd = hostapd.add_ap(apdev[0], params)
    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")
    dev[0].connect(ssid, psk="12345678", ieee80211w="2",
                   key_mgmt="WPA-PSK", proto="WPA2", scan_freq="2412")
    if "OK" not in dev[0].request("DROP_SA"):
        raise Exception("DROP_SA failed")
    dev[0].request("REASSOCIATE")
    dev[0].wait_connected(timeout=10, error="Timeout on re-connection")
    if wt.get_sta_counter("reassocresp_comeback", apdev[0]['bssid'],
                          dev[0].p2p_interface_addr()) < 1:
        raise Exception("AP did not use reassociation comeback request")

# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import setup [as 别名]
def test_ap_wpa2_plaintext_group_m1(dev, apdev):
    """Plaintext group M1"""
    params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
    hapd = hostapd.add_ap(apdev[0], params)

    Wlantest.setup(hapd)
    wt = Wlantest()
    wt.flush()
    wt.add_passphrase("12345678")

    dev[0].connect("test-wpa2-psk", psk="12345678", scan_freq="2412")

    time.sleep(0.1)
    addr = dev[0].own_addr()
    if "OK" not in hapd.request("RESEND_GROUP_M1 " + addr + " plaintext"):
        raise Exception("RESEND_GROUP_M1 failed")
    time.sleep(0.2)
    if "OK" not in hapd.request("RESEND_GROUP_M1 " + addr):
        raise Exception("RESEND_GROUP_M1 failed")
    time.sleep(0.1)