本文整理汇总了Python中wlantest.Wlantest.get_sta_counter方法的典型用法代码示例。如果您正苦于以下问题：Python Wlantest.get_sta_counter方法的具体用法？Python Wlantest.get_sta_counter怎么用？Python Wlantest.get_sta_counter使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类wlantest.Wlantest的用法示例。
在下文中一共展示了Wlantest.get_sta_counter方法的10个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的Python代码示例。
示例1: test_ap_pmf_required
# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import get_sta_counter [as 别名]
def test_ap_pmf_required(dev, apdev):
"""WPA2-PSK AP with PMF required"""
ssid = "test-pmf-required"
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
params["wpa_key_mgmt"] = "WPA-PSK-SHA256";
params["ieee80211w"] = "2";
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
key_mgmt = hapd.get_config()['key_mgmt']
if key_mgmt.split(' ')[0] != "WPA-PSK-SHA256":
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
dev[0].connect(ssid, psk="12345678", ieee80211w="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
hwsim_utils.test_connectivity(dev[0].ifname, apdev[0]['ifname'])
dev[1].connect(ssid, psk="12345678", ieee80211w="2",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
hwsim_utils.test_connectivity(dev[1].ifname, apdev[0]['ifname'])
hapd = hostapd.Hostapd(apdev[0]['ifname'])
hapd.request("SA_QUERY " + dev[0].p2p_interface_addr())
hapd.request("SA_QUERY " + dev[1].p2p_interface_addr())
wt.require_ap_pmf_mandatory(apdev[0]['bssid'])
wt.require_sta_pmf(apdev[0]['bssid'], dev[0].p2p_interface_addr())
wt.require_sta_pmf_mandatory(apdev[0]['bssid'], dev[1].p2p_interface_addr())
time.sleep(0.1)
if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
dev[0].p2p_interface_addr()) < 1:
raise Exception("STA did not reply to SA Query")
if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
dev[1].p2p_interface_addr()) < 1:
raise Exception("STA did not reply to SA Query")示例2: test_ap_pmf_sta_unprot_deauth_burst
# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import get_sta_counter [as 别名]
def test_ap_pmf_sta_unprot_deauth_burst(dev, apdev):
"""WPA2-PSK AP with station receiving burst of unprotected Deauthentication frames"""
ssid = "deauth-attack"
addr = dev[0].p2p_dev_addr()
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="use_monitor=1")
id = wpas.add_network()
wpas.set_network(id, "mode", "2")
wpas.set_network_quoted(id, "ssid", ssid)
wpas.set_network(id, "proto", "WPA2")
wpas.set_network(id, "key_mgmt", "WPA-PSK-SHA256")
wpas.set_network(id, "ieee80211w", "2")
wpas.set_network_quoted(id, "psk", "12345678")
wpas.set_network(id, "pairwise", "CCMP")
wpas.set_network(id, "group", "CCMP")
wpas.set_network(id, "frequency", "2412")
wpas.connect_network(id)
bssid = wpas.p2p_dev_addr()
dev[0].connect(ssid, psk="12345678", ieee80211w="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
for i in range(0, 10):
wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
if num_req < 1:
raise Exception("STA did not send SA Query")
if num_resp < 1:
raise Exception("AP did not reply to SA Query")
if num_req > 1:
raise Exception("STA initiated too many SA Query procedures (%d)" % num_req)
time.sleep(10)
for i in range(0, 5):
wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
if num_req != 2 or num_resp != 2:
raise Exception("Unexpected number of SA Query procedures (req=%d resp=%d)" % (num_req, num_resp))示例3: test_ap_pmf_sta_sa_query
# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import get_sta_counter [as 别名]
def test_ap_pmf_sta_sa_query(dev, apdev):
"""WPA2-PSK AP with station using SA Query"""
ssid = "assoc-comeback"
addr = dev[0].own_addr()
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
wpas = WpaSupplicant(global_iface='/tmp/wpas-wlan5')
wpas.interface_add("wlan5", drv_params="use_monitor=1")
id = wpas.add_network()
wpas.set_network(id, "mode", "2")
wpas.set_network_quoted(id, "ssid", ssid)
wpas.set_network(id, "proto", "WPA2")
wpas.set_network(id, "key_mgmt", "WPA-PSK-SHA256")
wpas.set_network(id, "ieee80211w", "2")
wpas.set_network_quoted(id, "psk", "12345678")
wpas.set_network(id, "pairwise", "CCMP")
wpas.set_network(id, "group", "CCMP")
wpas.set_network(id, "frequency", "2412")
wpas.connect_network(id)
bssid = wpas.own_addr()
wpas.dump_monitor()
dev[0].connect(ssid, psk="12345678", ieee80211w="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
wpas.dump_monitor()
wpas.request("DEAUTHENTICATE " + addr + " test=0")
wpas.dump_monitor()
wpas.request("DISASSOCIATE " + addr + " test=0")
wpas.dump_monitor()
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
wpas.dump_monitor()
wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
wpas.dump_monitor()
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
if wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr) < 1:
raise Exception("STA did not send SA Query")
if wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr) < 1:
raise Exception("AP did not reply to SA Query")
wpas.dump_monitor()示例4: test_ap_pmf_assoc_comeback
# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import get_sta_counter [as 别名]
def test_ap_pmf_assoc_comeback(dev, apdev):
"""WPA2-PSK AP with PMF association comeback"""
ssid = "assoc-comeback"
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
params["wpa_key_mgmt"] = "WPA-PSK-SHA256";
params["ieee80211w"] = "2";
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect(ssid, psk="12345678", ieee80211w="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
hapd.set("ext_mgmt_frame_handling", "1")
dev[0].request("DISCONNECT")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"])
if ev is None:
raise Exception("Timeout on disconnection")
hapd.set("ext_mgmt_frame_handling", "0")
dev[0].request("REASSOCIATE")
ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"])
if ev is None:
raise Exception("Timeout on re-connection")
if wt.get_sta_counter("assocresp_comeback", apdev[0]['bssid'],
dev[0].p2p_interface_addr()) < 1:
raise Exception("AP did not use association comeback request")示例5: test_ocv_sa_query_csa
# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import get_sta_counter [as 别名]
def test_ocv_sa_query_csa(dev, apdev):
"""Test SA Query with OCV after channel switch"""
ssid = "test-pmf-required"
params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
params["ieee80211w"] = "2"
params["ocv"] = "1"
try:
hapd = hostapd.add_ap(apdev[0], params)
except Exception as e:
if "Failed to set hostapd parameter ocv" in str(e):
raise HwsimSkip("OCV not supported")
raise
Wlantest.setup(hapd)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
dev[0].connect(ssid, psk="12345678", ieee80211w="1", ocv="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
hapd.request("CHAN_SWITCH 5 2437")
time.sleep(1)
if wt.get_sta_counter("valid_saqueryreq_tx", apdev[0]['bssid'],
dev[0].own_addr()) < 1:
raise Exception("STA did not start SA Query after channel switch")示例6: test_ocv_sa_query
# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import get_sta_counter [as 别名]
def test_ocv_sa_query(dev, apdev):
"""Test SA Query with OCV"""
ssid = "test-pmf-required"
params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
params["ieee80211w"] = "2"
params["ocv"] = "1"
try:
hapd = hostapd.add_ap(apdev[0], params)
except Exception as e:
if "Failed to set hostapd parameter ocv" in str(e):
raise HwsimSkip("OCV not supported")
raise
Wlantest.setup(hapd)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
dev[0].connect(ssid, psk="12345678", ieee80211w="1", ocv="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
# Test that client can handle SA Query with OCI element
if "OK" not in hapd.request("SA_QUERY " + dev[0].own_addr()):
raise Exception("SA_QUERY failed")
time.sleep(0.1)
if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
dev[0].own_addr()) < 1:
raise Exception("STA did not reply to SA Query")
# Test that AP can handle SA Query with OCI element
if "OK" not in dev[0].request("UNPROT_DEAUTH"):
raise Exception("Triggering SA Query from the STA failed")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=3)
if ev is not None:
raise Exception("SA Query from the STA failed")示例7: test_ap_pmf_sta_unprot_deauth_burst
# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import get_sta_counter [as 别名]
def test_ap_pmf_sta_unprot_deauth_burst(dev, apdev):
"""WPA2-PSK AP with station receiving burst of unprotected Deauthentication frames"""
ssid = "deauth-attack"
addr = dev[0].own_addr()
wpas = start_wpas_ap(ssid)
bssid = wpas.own_addr()
Wlantest.setup(wpas)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
dev[0].connect(ssid, psk="12345678", ieee80211w="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
for i in range(0, 10):
wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
if num_req < 1:
raise Exception("STA did not send SA Query")
if num_resp < 1:
raise Exception("AP did not reply to SA Query")
if num_req > 1:
raise Exception("STA initiated too many SA Query procedures (%d)" % num_req)
time.sleep(10)
for i in range(0, 5):
wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
num_req = wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr)
num_resp = wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr)
if num_req != 2 or num_resp != 2:
raise Exception("Unexpected number of SA Query procedures (req=%d resp=%d)" % (num_req, num_resp))示例8: test_ap_pmf_required
# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import get_sta_counter [as 别名]
def test_ap_pmf_required(dev, apdev):
"""WPA2-PSK AP with PMF required"""
ssid = "test-pmf-required"
params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
params["wpa_key_mgmt"] = "WPA-PSK-SHA256"
params["ieee80211w"] = "2"
hapd = hostapd.add_ap(apdev[0], params)
Wlantest.setup(hapd)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
key_mgmt = hapd.get_config()['key_mgmt']
if key_mgmt.split(' ')[0] != "WPA-PSK-SHA256":
raise Exception("Unexpected GET_CONFIG(key_mgmt): " + key_mgmt)
dev[0].connect(ssid, psk="12345678", ieee80211w="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
if "[WPA2-PSK-SHA256-CCMP]" not in dev[0].request("SCAN_RESULTS"):
raise Exception("Scan results missing RSN element info")
hwsim_utils.test_connectivity(dev[0], hapd)
dev[1].connect(ssid, psk="12345678", ieee80211w="2",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
hwsim_utils.test_connectivity(dev[1], hapd)
if "OK" not in hapd.request("SA_QUERY " + dev[0].own_addr()):
raise Exception("SA_QUERY failed")
if "OK" not in hapd.request("SA_QUERY " + dev[1].own_addr()):
raise Exception("SA_QUERY failed")
if "FAIL" not in hapd.request("SA_QUERY foo"):
raise Exception("Invalid SA_QUERY accepted")
wt.require_ap_pmf_mandatory(apdev[0]['bssid'])
wt.require_sta_pmf(apdev[0]['bssid'], dev[0].p2p_interface_addr())
wt.require_sta_pmf_mandatory(apdev[0]['bssid'], dev[1].p2p_interface_addr())
time.sleep(0.1)
if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
dev[0].p2p_interface_addr()) < 1:
raise Exception("STA did not reply to SA Query")
if wt.get_sta_counter("valid_saqueryresp_tx", apdev[0]['bssid'],
dev[1].p2p_interface_addr()) < 1:
raise Exception("STA did not reply to SA Query")示例9: test_ap_pmf_sta_sa_query
# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import get_sta_counter [as 别名]
def test_ap_pmf_sta_sa_query(dev, apdev):
"""WPA2-PSK AP with station using SA Query"""
ssid = "assoc-comeback"
addr = dev[0].own_addr()
wpas = start_wpas_ap(ssid)
bssid = wpas.own_addr()
Wlantest.setup(wpas)
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
dev[0].connect(ssid, psk="12345678", ieee80211w="1",
key_mgmt="WPA-PSK WPA-PSK-SHA256", proto="WPA2",
scan_freq="2412")
wpas.dump_monitor()
wpas.request("DEAUTHENTICATE " + addr + " test=0")
wpas.dump_monitor()
wpas.request("DISASSOCIATE " + addr + " test=0")
wpas.dump_monitor()
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
wpas.request("DEAUTHENTICATE " + addr + " reason=6 test=0")
wpas.dump_monitor()
wpas.request("DISASSOCIATE " + addr + " reason=7 test=0")
wpas.dump_monitor()
ev = dev[0].wait_event(["CTRL-EVENT-DISCONNECTED"], timeout=1)
if ev is not None:
raise Exception("Unexpected disconnection")
if wt.get_sta_counter("valid_saqueryreq_tx", bssid, addr) < 1:
raise Exception("STA did not send SA Query")
if wt.get_sta_counter("valid_saqueryresp_rx", bssid, addr) < 1:
raise Exception("AP did not reply to SA Query")
wpas.dump_monitor()示例10: test_ap_pmf_assoc_comeback2
# 需要导入模块: from wlantest import Wlantest [as 别名]
# 或者: from wlantest.Wlantest import get_sta_counter [as 别名]
def test_ap_pmf_assoc_comeback2(dev, apdev):
"""WPA2-PSK AP with PMF association comeback (using DROP_SA)"""
ssid = "assoc-comeback"
wt = Wlantest()
wt.flush()
wt.add_passphrase("12345678")
params = hostapd.wpa2_params(ssid=ssid, passphrase="12345678")
params["wpa_key_mgmt"] = "WPA-PSK";
params["ieee80211w"] = "1";
hapd = hostapd.add_ap(apdev[0]['ifname'], params)
dev[0].connect(ssid, psk="12345678", ieee80211w="2",
key_mgmt="WPA-PSK", proto="WPA2", scan_freq="2412")
if "OK" not in dev[0].request("DROP_SA"):
raise Exception("DROP_SA failed")
dev[0].request("REASSOCIATE")
dev[0].wait_connected(timeout=10, error="Timeout on re-connection")
if wt.get_sta_counter("reassocresp_comeback", apdev[0]['bssid'],
dev[0].p2p_interface_addr()) < 1:
raise Exception("AP did not use reassociation comeback request")