Python MobileRestClient.start_replication方法代码示例

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_auto_prune_with_pull(setup_client_syncgateway_test):
    """Sanity test for autopruning with replication

    1. Create a database on LiteServ (ls_db)
    2. Add doc to sync gateway
    3. Update doc 50 times on sync_gateway
    4. Set up pull replication from sync_gateway db to LiteServ db
    5. Verify number of revisions on client is default (20)
    """

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_admin_url = setup_client_syncgateway_test["sg_admin_url"]

    client = MobileRestClient()
    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config, url=sg_url, config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_auto_prune_listener_sanity' ...")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_admin_url: {}".format(sg_admin_url))

    num_docs = 1
    num_revs = 50

    sg_user_channels = ["NBC"]
    sg_db = "db"
    sg_user_name = "sg_user"

    client.create_user(url=sg_admin_url, db=sg_db, name=sg_user_name, password="password", channels=sg_user_channels)
    sg_session = client.create_session(url=sg_admin_url, db=sg_db, name=sg_user_name)

    ls_db = client.create_database(url=ls_url, name="ls_db")

    sg_db_docs = client.add_docs(
        url=sg_url, db=sg_db, number=num_docs, id_prefix=sg_db, channels=sg_user_channels, auth=sg_session
    )
    assert len(sg_db_docs) == num_docs

    sg_docs_update = client.update_docs(url=sg_url, db=sg_db, docs=sg_db_docs, number_updates=num_revs, auth=sg_session)

    # Start continuous replication ls_db <- sg_db
    repl_one = client.start_replication(url=ls_url, continuous=True, from_url=sg_admin_url, from_db=sg_db, to_db=ls_db)

    client.wait_for_replication_status_idle(url=ls_url, replication_id=repl_one)
    client.verify_docs_present(url=ls_url, db=ls_db, expected_docs=sg_docs_update)
    client.verify_revs_num_for_docs(url=ls_url, db=ls_db, docs=sg_docs_update, expected_revs_per_doc=20)

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_peer_2_peer_sanity_pull(setup_p2p_test):
    """
    1. Create ls_db1 database on LiteServ One
    2. Create ls_db2 database on LiteServ Two
    3. Create continuous pull replication LiteServ 1 ls_db1 <- LiteServ 2 ls_db2
    4. Add 5000 docs to LiteServ 2 ls_db2
    5. Verify all docs replicate to LiteServ 1 ls_db1
    6. Verify all docs show up in changes for LiteServ 1 ls_db1
    """

    ls_url_one = setup_p2p_test["ls_url_one"]
    ls_url_two = setup_p2p_test["ls_url_two"]

    num_docs_per_db = 5000

    log_info("ls_url_one: {}".format(ls_url_one))
    log_info("ls_url_two: {}".format(ls_url_two))

    client = MobileRestClient()

    log_info("Creating databases")
    ls_db1 = client.create_database(url=ls_url_one, name="ls_db1")
    ls_db2 = client.create_database(url=ls_url_two, name="ls_db2")

    # Setup continuous pull replication from LiteServ 2 ls_db2 to LiteServ 1 ls_db1

    pull_repl = client.start_replication(
        url=ls_url_one,
        continuous=True,
        from_url=ls_url_two, from_db=ls_db2,
        to_db=ls_db1
    )

    client.wait_for_replication_status_idle(url=ls_url_one, replication_id=pull_repl)

    ls_db2_docs = client.add_docs(url=ls_url_two, db=ls_db2, number=num_docs_per_db, id_prefix="test_ls_db2")
    assert len(ls_db2_docs) == num_docs_per_db

    client.verify_docs_present(url=ls_url_one, db=ls_db1, expected_docs=ls_db2_docs)
    client.verify_docs_in_changes(url=ls_url_one, db=ls_db1, expected_docs=ls_db2_docs)

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_verify_open_revs_with_revs_limit_push_conflict(setup_client_syncgateway_test):
    """Test replication from multiple client dbs to one sync_gateway db

    https://github.com/couchbase/couchbase-lite-ios/issues/1277
    """

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_admin_url = setup_client_syncgateway_test["sg_admin_url"]

    num_docs = 100
    num_revs = 20

    sg_db = "db"
    sg_user_name = "sg_user"

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_url,
        config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_verify_open_revs_with_revs_limit_push_conflict'")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_admin_url: {}".format(sg_admin_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("num_docs: {}".format(num_docs))
    log_info("num_revs: {}".format(num_revs))

    client = MobileRestClient()

    # Test the endpoint, listener does not support users but should have a default response
    client.get_session(url=ls_url)
    sg_user_channels = ["NBC"]
    client.create_user(url=sg_admin_url, db=sg_db, name=sg_user_name, password="password", channels=sg_user_channels)
    sg_session = client.create_session(url=sg_admin_url, db=sg_db, name=sg_user_name)

    ls_db = client.create_database(url=ls_url, name="ls_db")
    ls_db_docs = client.add_docs(url=ls_url, db=ls_db, number=num_docs, id_prefix="ls_db", channels=sg_user_channels)
    assert len(ls_db_docs) == num_docs

    # Start replication ls_db -> sg_db
    repl_one = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_admin_url, to_db=sg_db
    )

    client.verify_docs_present(url=sg_admin_url, db=sg_db, expected_docs=ls_db_docs)

    client.update_docs(url=sg_url, db=sg_db, docs=ls_db_docs, number_updates=num_revs, auth=sg_session)
    sg_current_doc = client.get_doc(url=sg_url, db=sg_db, doc_id="ls_db_2", auth=sg_session)

    client.update_docs(url=ls_url, db=ls_db, docs=ls_db_docs, number_updates=num_revs)
    ls_current_doc = client.get_doc(url=ls_url, db=ls_db, doc_id="ls_db_2")

    client.wait_for_replication_status_idle(url=ls_url, replication_id=repl_one)

    client.verify_doc_rev_generation(url=ls_url, db=ls_db, doc_id=ls_current_doc["_id"], expected_generation=21)
    client.verify_doc_rev_generation(url=sg_url, db=sg_db, doc_id=sg_current_doc["_id"], expected_generation=21, auth=sg_session)

    expected_ls_revs = [ls_current_doc["_rev"]]
    client.verify_open_revs(url=ls_url, db=ls_db, doc_id=ls_current_doc["_id"], expected_open_revs=expected_ls_revs)

    expected_sg_revs = [ls_current_doc["_rev"], sg_current_doc["_rev"]]
    client.verify_open_revs(url=sg_admin_url, db=sg_db, doc_id=sg_current_doc["_id"], expected_open_revs=expected_sg_revs)

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_replication_with_multiple_client_dbs_and_single_sync_gateway_db(setup_client_syncgateway_test):
    """Test replication from multiple client dbs to one sync_gateway db"""

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_admin_url = setup_client_syncgateway_test["sg_admin_url"]

    num_docs = 1000

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_url,
        config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_replication_with_multiple_client_dbs_and_single_sync_gateway_db'")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_admin_url: {}".format(sg_admin_url))
    log_info("sg_url: {}".format(sg_url))

    client = MobileRestClient()

    ls_db1 = client.create_database(url=ls_url, name="ls_db1")
    ls_db2 = client.create_database(url=ls_url, name="ls_db2")
    sg_db = client.create_database(url=sg_admin_url, name="sg_db", server="walrus:")

    # Setup continuous push / pull replication from ls_db1 to sg_db
    client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db1,
        to_url=sg_admin_url, to_db=sg_db
    )

    client.start_replication(
        url=ls_url,
        continuous=True,
        from_url=sg_admin_url, from_db=sg_db,
        to_db=ls_db1
    )

    # Setup continuous push / pull replication from ls_db2 to sg_db
    client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db2,
        to_url=sg_admin_url, to_db=sg_db
    )

    client.start_replication(
        url=ls_url,
        continuous=True,
        from_url=sg_admin_url, from_db=sg_db,
        to_db=ls_db2
    )

    ls_db_one_docs = client.add_docs(url=ls_url, db=ls_db1, number=num_docs, id_prefix=ls_db1)
    assert len(ls_db_one_docs) == 1000

    ls_db_two_docs = client.add_docs(url=ls_url, db=ls_db2, number=num_docs, id_prefix=ls_db2)
    assert len(ls_db_two_docs) == 1000

    ls_db1_db2_docs = ls_db_one_docs + ls_db_two_docs

    client.verify_docs_present(url=ls_url, db=ls_db1, expected_docs=ls_db1_db2_docs)
    client.verify_docs_present(url=ls_url, db=ls_db2, expected_docs=ls_db1_db2_docs)
    client.verify_docs_present(url=sg_admin_url, db=sg_db, expected_docs=ls_db1_db2_docs)

    client.verify_docs_in_changes(url=sg_admin_url, db=sg_db, expected_docs=ls_db1_db2_docs)
    client.verify_docs_in_changes(url=ls_url, db=ls_db1, expected_docs=ls_db1_db2_docs)
    client.verify_docs_in_changes(url=ls_url, db=ls_db2, expected_docs=ls_db1_db2_docs)

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_client_to_sync_gateway_complex_replication_with_revs_limit(setup_client_syncgateway_test):
    """ Ported from sync_gateway tests repo
    ...  1.  Clear server buckets
    ...  2.  Restart liteserv with _session
    ...  3.  Restart sync_gateway wil that config
    ...  4.  Create db on LiteServ
    ...  5.  Add numDocs to LiteServ db
    ...  6.  Setup push replication from LiteServ db to sync_gateway
    ...  7.  Verify doc present on sync_gateway (number of docs)
    ...  8.  Update sg docs numRevs * 4 = 480
    ...  9.  Update docs on LiteServ db numRevs * 4 = 480
    ...  10. Setup pull replication from sg -> liteserv db
    ...  11. Verify all docs are replicated
    ...  12. compact LiteServ db (POST _compact)
    ...  13. Verify number of revs in LiteServ db (?revs_info=true) check rev status == available fail if revs available > revs limit
    ...  14. Delete LiteServ db conflicts (?conflicts=true) DELETE _conflicts
    ...  15. Create numDoc number of docs in LiteServ db
    ...  16. Update LiteServ db docs numRevs * 5 (600)
    ...  17. Verify LiteServ db revs is < 602
    ...  18. Verify LiteServ db docs revs prefix (9 * numRevs + 3)
    ...  19. Compact LiteServ db
    ...  20. Verify number of revs <= 10
    ...  21. Delete LiteServ docs
    ...  22. Delete Server bucket
    ...  23. Delete LiteServ db
    """

    ls_db_name = "ls_db"
    sg_db = "db"
    sg_user_name = "sg_user"
    num_docs = 10
    num_revs = 100

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_admin_url = setup_client_syncgateway_test["sg_admin_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_url,
        config="{}/walrus-revs-limit.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_client_to_sync_gateway_complex_replication_with_revs_limit'")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_admin_url: {}".format(sg_admin_url))
    log_info("sg_url: {}".format(sg_url))

    client = MobileRestClient()

    # Test the endpoint, listener does not support users but should have a default response
    client.get_session(url=ls_url)

    sg_user_channels = ["NBC"]
    client.create_user(url=sg_admin_url, db=sg_db, name=sg_user_name, password="password", channels=sg_user_channels)
    sg_session = client.create_session(url=sg_admin_url, db=sg_db, name=sg_user_name)

    ls_db = client.create_database(url=ls_url, name=ls_db_name)
    ls_db_docs = client.add_docs(url=ls_url, db=ls_db, number=num_docs, id_prefix=ls_db, channels=sg_user_channels)
    assert len(ls_db_docs) == num_docs

    # Start replication ls_db -> sg_db
    repl_one = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_admin_url, to_db=sg_db
    )

    client.verify_docs_present(url=sg_admin_url, db=sg_db, expected_docs=ls_db_docs)

    # Delay is to the updates here due to couchbase/couchbase-lite-ios#1277.
    # Basically, if your revs depth is small and someone is updating a doc past the revs depth before a push replication,
    # the push replication will have no common ancestor with sync_gateway causing conflicts to be created.
    # Adding a delay between updates helps this situation. There is an alternative for CBL mac and CBL NET to change the default revs client depth
    # but that is not configurable for Android.
    # Currently adding a delay will allow the replication to act as expected for all platforms now.
    client.update_docs(url=sg_url, db=sg_db, docs=ls_db_docs, number_updates=num_revs, delay=0.1, auth=sg_session)
    client.update_docs(url=ls_url, db=ls_db, docs=ls_db_docs, number_updates=num_revs, delay=0.1)

    # Start replication ls_db <- sg_db
    repl_two = client.start_replication(
        url=ls_url,
        continuous=True,
        from_url=sg_admin_url, from_db=sg_db,
        to_db=ls_db
    )

    client.wait_for_replication_status_idle(url=ls_url, replication_id=repl_one)
    client.wait_for_replication_status_idle(url=ls_url, replication_id=repl_two)

    client.compact_database(url=ls_url, db=ls_db)

    # LiteServ should only have 20 revisions due to built in client revs limit
    client.verify_revs_num_for_docs(url=ls_url, db=ls_db, docs=ls_db_docs, expected_revs_per_doc=20)

    # Sync Gateway should have 100 revisions due to the specified revs_limit in the sg config and possible conflict winners from the liteserv db
    client.verify_max_revs_num_for_docs(url=sg_url, db=sg_db, docs=ls_db_docs, expected_max_number_revs_per_doc=100, auth=sg_session)
#.........这里部分代码省略.........

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_replication_with_session_cookie(setup_client_syncgateway_test):
    """Regression test for https://github.com/couchbase/couchbase-lite-android/issues/817
    1. SyncGateway Config with guest disabled = true and One user added (e.g. user1 / 1234)
    2. Create a new session on SGW for the user1 by using POST /_session.
       Capture the SyncGatewaySession cookie from the set-cookie in the response header.
    3. Start continuous push and pull replicator on the LiteServ with SyncGatewaySession cookie.
       Make sure that both replicators start correctly
    4. Delete the session from SGW by sending DELETE /_sessions/ to SGW
    5. Cancel both push and pull replicator on the LiteServ
    6. Repeat step 1 and 2
    """

    ls_db = "ls_db"
    sg_db = "db"

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_admin_url = setup_client_syncgateway_test["sg_admin_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_url,
        config="{}/walrus-user.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_replication_with_session_cookie'")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_admin_url: {}".format(sg_admin_url))
    log_info("sg_url: {}".format(sg_url))

    client = MobileRestClient()
    client.create_database(url=ls_url, name=ls_db)

    # Get session header for user_1
    session_header = client.create_session_header(url=sg_url, db=sg_db, name="user_1", password="foo")

    # Get session id from header
    session_parts = re.split("=|;", session_header)
    session_id = session_parts[1]
    log_info("{}: {}".format(session_parts[0], session_id))
    session = (session_parts[0], session_id)

    # Start authenticated push replication
    repl_one = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_url,
        to_db=sg_db,
        to_auth=session_header
    )

    # Start authenticated pull replication
    repl_two = client.start_replication(
        url=ls_url,
        continuous=True,
        from_url=sg_url,
        from_db=sg_db,
        from_auth=session_header,
        to_db=ls_db,
    )

    # Wait for 2 replications to be 'Idle', On .NET they may not be immediately available via _active_tasks
    client.wait_for_replication_status_idle(ls_url, repl_one)
    client.wait_for_replication_status_idle(ls_url, repl_two)

    replications = client.get_replications(ls_url)
    assert len(replications) == 2, "2 replications (push / pull should be running)"

    num_docs_pushed = 100

    # Sanity test docs
    ls_docs = client.add_docs(url=ls_url, db=ls_db, number=num_docs_pushed, id_prefix="ls_doc", channels=["ABC"])
    assert len(ls_docs) == num_docs_pushed

    sg_docs = client.add_docs(url=sg_url, db=sg_db, number=num_docs_pushed, id_prefix="sg_doc", auth=session, channels=["ABC"])
    assert len(sg_docs) == num_docs_pushed

    all_docs = client.merge(ls_docs, sg_docs)
    log_info(all_docs)

    client.verify_docs_present(url=sg_admin_url, db=sg_db, expected_docs=all_docs)
    client.verify_docs_present(url=ls_url, db=ls_db, expected_docs=all_docs)

    # GET from session endpoint /{db}/_session/{session-id}
    session = client.get_session(url=sg_admin_url, db=sg_db, session_id=session_id)
    assert len(session["userCtx"]["channels"]) == 2, "There should be only 2 channels for the user"
    assert "ABC" in session["userCtx"]["channels"], "The channel info should contain 'ABC'"
    assert session["userCtx"]["name"] == "user_1", "The user should have the name 'user_1'"
    assert len(session["authentication_handlers"]) == 2, "There should be 2 authentication_handlers"
    assert "default" in session["authentication_handlers"], "Did not find 'default' in authentication_headers"
    assert "cookie" in session["authentication_handlers"], "Did not find 'cookie' in authentication_headers"

    log_info("SESSIONs: {}".format(session))

    # Delete session via sg admin port and _user rest endpoint
    client.delete_session(url=sg_admin_url, db=sg_db, user_name="user_1", session_id=session_id)

#.........这里部分代码省略.........

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_multiple_replications_created_with_unique_properties(setup_client_syncgateway_test):
    """Regression test for couchbase/couchbase-lite-java-core#1386
    1. Setup SGW with a remote database name db for an example
    2. Create a local database such as ls_db
    3. Send POST /_replicate with source = ls_db, target = http://localhost:4985/db, continuous = true
    4. Send POST /_replicate with source = ls_db, target = http://localhost:4985/db, continuous = true, doc_ids=["doc1", "doc2"]
    5. Send POST /_replicate with source = ls_db, target = http://localhost:4985/db, continuous = true, filter="filter1"
    6. Make sure that the session_id from each POST /_replicate are different.
    7. Send GET /_active_tasks to make sure that there are 3 tasks created.
    8. Send 3 POST /_replicate withe the same parameter as Step 3=5 plus cancel=true to stop those replicators
    9. Repeat Step 3 - 8 with source = and target = db for testing the pull replicator.
    """

    sg_db = "db"
    ls_db = "ls_db"

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_one_admin = setup_client_syncgateway_test["sg_admin_url"]
    sg_one_public = setup_client_syncgateway_test["sg_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_one_public,
        config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_multiple_replications_created_with_unique_properties'")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_one_admin: {}".format(sg_one_admin))
    log_info("sg_one_public: {}".format(sg_one_public))

    client = MobileRestClient()
    client.create_database(url=ls_url, name=ls_db)

    ########
    # PUSH #
    ########
    # Start 3 unique push replication requests
    repl_one = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db
    )
    client.wait_for_replication_status_idle(ls_url, repl_one)

    repl_two = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db,
        doc_ids=["doc_1", "doc_2"]
    )
    client.wait_for_replication_status_idle(ls_url, repl_two)

    # Create doc filter and add to the design doc
    filters = {
        "language": "javascript",
        "filters": {
            "sample_filter": "function(doc, req) { if (doc.type && doc.type === \"skip\") { return false; } return true; }"
        }
    }
    client.add_design_doc(url=ls_url, db=ls_db, name="by_type", doc=json.dumps(filters))

    repl_three = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db,
        repl_filter="by_type/sample_filter"
    )
    client.wait_for_replication_status_idle(ls_url, repl_three)

    # Verify 3 replicaitons are running
    replications = client.get_replications(ls_url)
    log_info(replications)
    assert len(replications) == 3, "Number of replications, Expected: {} Actual: {}".format(
        3,
        len(replications)
    )

    # Stop repl001
    client.stop_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db
    )

    # Stop repl002
    client.stop_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
#.........这里部分代码省略.........

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_initial_pull_replication(setup_client_syncgateway_test, continuous):
    """
    1. Prepare sync-gateway to have 10000 documents.
    2. Create a single shot / continuous pull replicator and to pull the docs into a database.
    3. Verify if all of the docs get pulled.
    Referenced issue: couchbase/couchbase-lite-android#955.
    """

    sg_db = "db"
    ls_db = "ls_db"

    num_docs = 10000

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_one_admin = setup_client_syncgateway_test["sg_admin_url"]
    sg_one_public = setup_client_syncgateway_test["sg_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_one_public,
        config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_initial_pull_replication', continuous: {}".format(continuous))
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_one_admin: {}".format(sg_one_admin))
    log_info("sg_one_public: {}".format(sg_one_public))

    client = MobileRestClient()
    client.create_user(sg_one_admin, sg_db, "seth", password="password", channels=["ABC", "NBC"])
    session = client.create_session(sg_one_admin, sg_db, "seth")

    # Create 'num_docs' docs on sync_gateway
    docs = client.add_docs(
        url=sg_one_public,
        db=sg_db,
        number=num_docs,
        id_prefix="seeded_doc",
        generator="four_k",
        auth=session
    )
    assert len(docs) == num_docs

    client.create_database(url=ls_url, name=ls_db)

    # Start oneshot pull replication
    repl_id = client.start_replication(
        url=ls_url,
        continuous=continuous,
        from_url=sg_one_admin,
        from_db=sg_db,
        to_db=ls_db
    )

    start = time.time()

    if continuous:
        log_info("Waiting for replication status 'Idle' for: {}".format(repl_id))
        # Android will report IDLE status, and drop into the 'verify_docs_present' below
        # due to https://github.com/couchbase/couchbase-lite-java-core/issues/1409
        client.wait_for_replication_status_idle(ls_url, repl_id)
    else:
        log_info("Waiting for no replications: {}".format(repl_id))
        client.wait_for_no_replications(ls_url)

    # Verify docs replicated to client
    client.verify_docs_present(url=ls_url, db=ls_db, expected_docs=docs, timeout=240)

    all_docs_replicated_time = time.time() - start
    log_info("Replication took: {}s".format(all_docs_replicated_time))

    # Verify docs show up in client's changes feed
    client.verify_docs_in_changes(url=ls_url, db=ls_db, expected_docs=docs)

    replications = client.get_replications(url=ls_url)

    if continuous:
        assert len(replications) == 1, "There should only be one replication running"
        assert replications[0]["status"] == "Idle", "Replication Status should be 'Idle'"
        assert replications[0]["continuous"], "Running replication should be continuous"
        # Only .NET has an 'error' property
        if "error" in replications[0]:
            assert len(replications[0]["error"]) == 0
    else:
        assert len(replications) == 0, "No replications should be running"

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_initial_push_replication(setup_client_syncgateway_test, continuous):
    """
    1. Prepare LiteServ to have 10000 documents.
    2. Create a single shot push / continuous replicator and to push the docs into a sync_gateway database.
    3. Verify if all of the docs get pushed.
    """

    sg_db = "db"
    ls_db = "ls_db"
    seth_channels = ["ABC", "NBC"]

    num_docs = 10000

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_one_admin = setup_client_syncgateway_test["sg_admin_url"]
    sg_one_public = setup_client_syncgateway_test["sg_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_one_public,
        config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_initial_push_replication', continuous: {}".format(continuous))
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_one_admin: {}".format(sg_one_admin))
    log_info("sg_one_public: {}".format(sg_one_public))

    client = MobileRestClient()
    client.create_user(sg_one_admin, sg_db, "seth", password="password", channels=seth_channels)
    session = client.create_session(sg_one_admin, sg_db, "seth")

    client.create_database(url=ls_url, name=ls_db)

    # Create 'num_docs' docs on LiteServ
    docs = client.add_docs(
        url=ls_url,
        db=ls_db,
        number=num_docs,
        id_prefix="seeded_doc",
        generator="four_k",
        channels=seth_channels
    )
    assert len(docs) == num_docs

    # Start push replication
    repl_id = client.start_replication(
        url=ls_url,
        continuous=continuous,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db
    )

    if continuous:
        log_info("Waiting for replication status 'Idle' for: {}".format(repl_id))
        client.wait_for_replication_status_idle(ls_url, repl_id)
    else:
        log_info("Waiting for no replications: {}".format(repl_id))
        client.wait_for_no_replications(ls_url)

    # Verify docs replicated to sync_gateway
    client.verify_docs_present(url=sg_one_public, db=sg_db, expected_docs=docs, auth=session)

    # Verify docs show up in sync_gateway's changes feed
    client.verify_docs_in_changes(url=sg_one_public, db=sg_db, expected_docs=docs, auth=session)

    replications = client.get_replications(url=ls_url)

    if continuous:
        assert len(replications) == 1, "There should only be one replication running"
        assert replications[0]["status"] == "Idle", "Replication Status should be 'Idle'"
        assert replications[0]["continuous"], "Running replication should be continuous"
        # Only .NET has an 'error' property
        if "error" in replications[0]:
            assert len(replications[0]["error"]) == 0
    else:
        assert len(replications) == 0, "No replications should be running"

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_peer_2_peer_sanity(setup_p2p_test):
    """
    1. Sanity P2P Scenario
    2. Launch LiteServ 1 and LiteServ 2
    3. Create a database on each LiteServ
    4. Start continuous push pull replication from each db to the other
    5. Add docs to each db
    6. Verify the docs show up at each db
    7. Verify the docs show up in the database's changes feed.
    """

    ls_url_one = setup_p2p_test["ls_url_one"]
    ls_url_two = setup_p2p_test["ls_url_two"]

    num_docs_per_db = 1000

    log_info("ls_url_one: {}".format(ls_url_one))
    log_info("ls_url_two: {}".format(ls_url_two))

    client = MobileRestClient()

    log_info("Creating databases")
    ls_db1 = client.create_database(url=ls_url_one, name="ls_db1")
    ls_db2 = client.create_database(url=ls_url_two, name="ls_db2")

    # Setup continuous push / pull replication from LiteServ 1 ls_db1 to LiteServ 2 ls_db2
    repl_one = client.start_replication(
        url=ls_url_one,
        continuous=True,
        from_db=ls_db1,
        to_url=ls_url_two, to_db=ls_db2
    )

    repl_two = client.start_replication(
        url=ls_url_one,
        continuous=True,
        from_url=ls_url_two, from_db=ls_db2,
        to_db=ls_db1
    )

    # Setup continuous push / pull replication from LiteServ 2 ls_db2 to LiteServ 1 ls_db1
    repl_three = client.start_replication(
        url=ls_url_two,
        continuous=True,
        from_db=ls_db2,
        to_url=ls_url_one, to_db=ls_db1
    )

    repl_four = client.start_replication(
        url=ls_url_two,
        continuous=True,
        from_url=ls_url_one, from_db=ls_db1,
        to_db=ls_db2
    )

    client.wait_for_replication_status_idle(url=ls_url_one, replication_id=repl_one)
    client.wait_for_replication_status_idle(url=ls_url_one, replication_id=repl_two)
    client.wait_for_replication_status_idle(url=ls_url_two, replication_id=repl_three)
    client.wait_for_replication_status_idle(url=ls_url_two, replication_id=repl_four)

    ls_url_one_replications = client.get_replications(ls_url_one)
    assert len(ls_url_one_replications) == 2

    ls_url_two_replications = client.get_replications(ls_url_two)
    assert len(ls_url_two_replications) == 2

    ls_db1_docs = client.add_docs(url=ls_url_one, db=ls_db1, number=num_docs_per_db, id_prefix="test_ls_db1")
    assert len(ls_db1_docs) == num_docs_per_db

    ls_db2_docs = client.add_docs(url=ls_url_two, db=ls_db2, number=num_docs_per_db, id_prefix="test_ls_db2")
    assert len(ls_db2_docs) == num_docs_per_db

    all_docs = client.merge(ls_db1_docs, ls_db2_docs)
    assert len(all_docs) == 2000

    client.verify_docs_present(url=ls_url_one, db=ls_db1, expected_docs=all_docs)
    client.verify_docs_present(url=ls_url_two, db=ls_db2, expected_docs=all_docs)

    client.verify_docs_in_changes(url=ls_url_one, db=ls_db1, expected_docs=all_docs)
    client.verify_docs_in_changes(url=ls_url_two, db=ls_db2, expected_docs=all_docs)

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_auto_prune_listener_keeps_conflicts_sanity(setup_client_syncgateway_test):
    """"
    1. Create db on LiteServ and add docs
    2. Create db on sync_gateway and add docs with the same id
    3. Create one shot push / pull replication
    4. Update LiteServ 50 times
    5. Assert that pruned conflict is still present
    6. Delete the current revision and check that a GET returns the old conflict as the current rev
    """

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_admin_url = setup_client_syncgateway_test["sg_admin_url"]

    client = MobileRestClient()
    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config, url=sg_url, config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_auto_prune_listener_keeps_conflicts_sanity' ...")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_admin_url: {}".format(sg_admin_url))

    num_docs = 1
    num_revs = 100
    sg_db = "db"
    ls_db = "ls_db"
    sg_user_name = "sg_user"
    sg_user_channels = ["NBC"]
    client.create_user(url=sg_admin_url, db=sg_db, name=sg_user_name, password="password", channels=sg_user_channels)

    sg_session = client.create_session(url=sg_admin_url, db=sg_db, name=sg_user_name)
    ls_db = client.create_database(url=ls_url, name=ls_db)

    # Create docs with same prefix to create conflicts when the dbs complete 1 shot replication
    ls_db_docs = client.add_docs(url=ls_url, db=ls_db, number=num_docs, id_prefix="doc", channels=sg_user_channels)
    assert len(ls_db_docs) == num_docs

    sg_db_docs = client.add_docs(
        url=sg_url, db=sg_db, number=num_docs, id_prefix="doc", channels=sg_user_channels, auth=sg_session
    )
    assert len(sg_db_docs) == num_docs

    # Setup one shot pull replication and wait for idle.
    client.start_replication(url=ls_url, continuous=False, from_url=sg_admin_url, from_db=sg_db, to_db=ls_db)

    client.wait_for_no_replications(url=ls_url)

    # There should now be a conflict on the client
    conflicting_revs = client.get_conflict_revs(url=ls_url, db=ls_db, doc=ls_db_docs[0])

    # Get the doc with conflict rev
    client.get_doc(url=ls_url, db=ls_db, doc_id=ls_db_docs[0]["id"], rev=conflicting_revs[0])

    # Update doc past revs limit and make sure conflict is still available
    updated_doc = client.update_doc(url=ls_url, db=ls_db, doc_id=ls_db_docs[0]["id"], number_updates=num_revs)
    client.get_doc(url=ls_url, db=ls_db, doc_id=ls_db_docs[0]["id"], rev=conflicting_revs[0])

    # Delete doc and ensure that the conflict is now the current rev
    client.delete_doc(url=ls_url, db=ls_db, doc_id=ls_db_docs[0]["id"], rev=updated_doc["rev"])
    current_doc = client.get_doc(url=ls_url, db=ls_db, doc_id=ls_db_docs[0]["id"])
    assert current_doc["_rev"] == conflicting_revs[0]

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_inline_large_attachments(setup_client_syncgateway_test):
    """
    1.  Start LiteServ and Sync Gateway
    2.  Create 2 databases on LiteServ (ls_db1, ls_db2)
    3.  Start continuous push replication from ls_db1 to sg_db
    4.  Start continuous pull replication from sg_db to ls_db2
    5.  PUT 5 large inline attachments to ls_db1
    6.  DELETE the docs on ls_db1
    7.  PUT same 5 large inline attachments to ls_db1
    8.  Verify docs replicate to ls_db2
    9.  Purge ls_db1
    10. Verify docs removed
    """

    log_info("Running 'test_inline_large_attachments' ...")

    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_url_admin = setup_client_syncgateway_test["sg_admin_url"]

    ls_url = setup_client_syncgateway_test["ls_url"]

    log_info("ls_url: {}".format(ls_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_url_admin: {}".format(sg_url_admin))

    ls_db1 = "ls_db1"
    ls_db2 = "ls_db2"
    sg_db = "db"

    client = MobileRestClient()
    client.create_database(ls_url, ls_db1)
    client.create_database(ls_url, ls_db2)

    # Start continuous push replication from ls_db1 -> sg_db
    client.start_replication(url=ls_url, continuous=True, from_db=ls_db1, to_url=sg_url, to_db=sg_db)

    # Start continuous push replication from sg_db -> ls_db2
    client.start_replication(url=ls_url, continuous=True, from_url=sg_url, from_db=sg_db, to_db=ls_db2)

    # doc with 2.36 PNG attachment
    attachment_docs = []
    for i in range(5):
        doc = document.create_doc(
            doc_id="large_attach_{}".format(i), attachment_name="golden_gate_large.jpg", channels=["ABC"]
        )
        attachment_docs.append(doc)

    # add large attachments to ls_db1
    docs = []
    for doc in attachment_docs:
        docs.append(client.add_doc(ls_url, ls_db1, doc, use_post=False))

    # Delete docs
    client.delete_docs(ls_url, ls_db1, docs)
    client.verify_docs_deleted(ls_url, ls_db1, docs)

    # Recreated docs
    recreated_docs = []
    for doc in attachment_docs:
        recreated_docs.append(client.add_doc(ls_url, ls_db1, doc, use_post=False))

    client.verify_docs_present(ls_url, ls_db1, recreated_docs)
    client.verify_docs_present(sg_url, sg_db, recreated_docs)
    client.verify_docs_present(ls_url, ls_db2, recreated_docs)

    purged_docs = client.purge_docs(ls_url, ls_db1, recreated_docs)
    log_info(purged_docs)

    # All purged docs should have replicated and should be gone now.
    # This is currently failing due to some docs not replicating to ls_db2
    client.verify_docs_deleted(ls_url, ls_db1, recreated_docs)
    client.verify_docs_deleted(sg_url, sg_db, recreated_docs)
    client.verify_docs_deleted(ls_url, ls_db2, recreated_docs)

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_stale_revision_should_not_be_in_the_index(setup_client_syncgateway_test):
    """original ticket: https://github.com/couchbase/couchbase-lite-android/issues/855

    scenario:
    1. Running sync_gateway
    2. Create database and starts both push and pull replicators through client REST API
    3. Create two or more views through client REST API
    4. Add doc, and verify doc is index with current revision through client REST API
    5. Make sure document is pushed to sync gateway through sync gateway REST API
    6. Update doc with sync gateway (not client side) through sync gateway REST API
    7. Make sure updated document is pull replicated to client  through client REST API
    8. Make sure updated document is indexed through client REST API
    9. Make sure stale revision is deleted from index.  through client REST API
    10. Pass criteria
    """

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_admin_url = setup_client_syncgateway_test["sg_admin_url"]

    num_docs = 10
    num_revs = 100

    d_doc_name = "dd"
    sg_db = "db"
    sg_user_name = "sg_user"

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_url,
        config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_stale_revision_should_not_be_in_the_index'")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_admin_url: {}".format(sg_admin_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("num_docs: {}".format(num_docs))
    log_info("num_revs: {}".format(num_revs))

    client = MobileRestClient()

    sg_user_channels = ["NBC"]
    client.create_user(url=sg_admin_url, db=sg_db, name=sg_user_name, password="password", channels=sg_user_channels)
    sg_session = client.create_session(url=sg_admin_url, db=sg_db, name=sg_user_name)

    view = """{
    "language" : "javascript",
    "views" : {
        "content_view" : {
            "map" : "function(doc, meta) { if (doc.content) { emit(doc._id, doc._rev); } }"
        },
        "update_view" : {
            "map" : "function(doc, meta) { emit(doc.updates, null); }"
        }
    }
}"""

    ls_db = client.create_database(url=ls_url, name="ls_db")

    # Setup continuous push / pull replication from ls_db1 to sg_db
    client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_admin_url, to_db=sg_db
    )

    client.start_replication(
        url=ls_url,
        continuous=True,
        from_url=sg_admin_url, from_db=sg_db,
        to_db=ls_db
    )

    design_doc_id = client.add_design_doc(url=ls_url, db=ls_db, name=d_doc_name, doc=view)
    client.get_doc(url=ls_url, db=ls_db, doc_id=design_doc_id)

    doc_body = document.create_doc(doc_id="doc_1", content={"hi": "I should be in the view"}, channels=sg_user_channels)

    log_info(doc_body)

    doc_body_2 = document.create_doc(doc_id="doc_2", channels=sg_user_channels)

    doc = client.add_doc(url=ls_url, db=ls_db, doc=doc_body)
    doc_2 = client.add_doc(url=ls_url, db=ls_db, doc=doc_body_2)

    content_view_rows = client.get_view(url=ls_url, db=ls_db, design_doc_id=design_doc_id, view_name="content_view")
    client.verify_view_row_num(view_response=content_view_rows, expected_num_rows=1)

    update_view_rows = client.get_view(url=ls_url, db=ls_db, design_doc_id=design_doc_id, view_name="update_view")
    client.verify_view_row_num(view_response=update_view_rows, expected_num_rows=2)

    expected_docs_list = [doc, doc_2]
    client.verify_docs_present(url=sg_url, db=sg_db, expected_docs=expected_docs_list, auth=sg_session)

    updated_doc = client.update_doc(url=sg_url, db=sg_db, doc_id=doc["id"], number_updates=10, auth=sg_session)

#.........这里部分代码省略.........

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import start_replication [as 别名]
def test_listener_two_sync_gateways(setup_client_2sgs_test):
    """
    Port of https://github.com/couchbaselabs/sync-gateway-tests/blob/master/tests/cbl-replication-mismatch-2-gateways.js
    Scenario:
      1. Start 2 sync_gateways
      2. Create sg_db_one db on sync_gateway one
      3. Create sg_db_two db on sync_gateway two
      4. Create ls_db_one and ls_db_two on Liteserv
      5. Setup continuous push / pull replication from ls_db_one <-> sg_db_one
      6. Setup continuous push / pull replication from ls_db_two <-> sg_db_two
      7. Setup continuous push / pull replication from sg_db_one <-> ls_db_two
      8. Setup continuous push / pull replication from sg_db_two <-> ls_db_one
      9. Add num_docs / 2 to each liteserv database
      10. Verify each database has num_docs docs
      11. Verify all_docs in all dbs
      12. Verify changes feed for sg_db_one and sg_db_two
      13. Verify chnages feed for ls_db_one and ls_db_two
    """

    num_docs = 500

    ls_url = setup_client_2sgs_test["ls_url"]
    cluster_config = setup_client_2sgs_test["cluster_config"]
    sg_one_admin_url = setup_client_2sgs_test["sg_one_admin_url"]
    sg_two_admin_url = setup_client_2sgs_test["sg_two_admin_url"]

    sg_util = SyncGateway()
    sg_util.start_sync_gateway(cluster_config=cluster_config, url=sg_one_admin_url, config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS))
    sg_util.start_sync_gateway(cluster_config=cluster_config, url=sg_two_admin_url, config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS))

    ls_db_one = "ls_db1"
    ls_db_two = "ls_db2"
    sg_db_one = "sg_db1"
    sg_db_two = "sg_db2"

    log_info("ls_url: {}".format(ls_url))
    log_info("sg_one_admin_url: {}".format(sg_one_admin_url))
    log_info("sg_two_admin_url: {}".format(sg_two_admin_url))
    log_info("num_docs: {}".format(num_docs))
    log_info("Running 'test_listener_two_sync_gateways' ...")

    client = MobileRestClient()

    # Create dbs on sync_gateway
    client.create_database(sg_one_admin_url, sg_db_one, "walrus:")
    client.create_database(sg_two_admin_url, sg_db_two, "walrus:")

    # Create dbs on LiteServ
    client.create_database(ls_url, ls_db_one)
    client.create_database(ls_url, ls_db_two)

    # Start continuous push pull replication ls_db_one <-> sg_db_one
    client.start_replication(
        url=ls_url, continuous=True,
        from_db=ls_db_one,
        to_url=sg_one_admin_url, to_db=sg_db_one
    )
    client.start_replication(
        url=ls_url, continuous=True,
        from_url=sg_one_admin_url, from_db=sg_db_one,
        to_db=ls_db_one
    )

    # Start continuous push pull replication ls_db_two <-> sg_db_two
    client.start_replication(
        url=ls_url, continuous=True,
        from_db=ls_db_two,
        to_url=sg_two_admin_url, to_db=sg_db_two
    )
    client.start_replication(
        url=ls_url, continuous=True,
        from_url=sg_two_admin_url, from_db=sg_db_two,
        to_db=ls_db_two
    )

    # Start continuous push pull replication sg_db_one <-> ls_db_two
    client.start_replication(
        url=ls_url, continuous=True,
        from_url=sg_one_admin_url, from_db=sg_db_one,
        to_db=ls_db_two
    )
    client.start_replication(
        url=ls_url, continuous=True,
        from_db=ls_db_two,
        to_url=sg_one_admin_url, to_db=sg_db_one
    )

    # Start continuous push pull replication sg_db_two <-> ls_db_one
    client.start_replication(
        url=ls_url, continuous=True,
        from_url=sg_two_admin_url, from_db=sg_db_two,
        to_db=ls_db_one
    )
    client.start_replication(
        url=ls_url, continuous=True,
        from_db=ls_db_one,
        to_url=sg_two_admin_url, to_db=sg_db_two
    )

    ls_db_one_docs = client.add_docs(url=ls_url, db=ls_db_one, number=num_docs / 2, id_prefix="ls_db_one_doc")
#.........这里部分代码省略.........