Python MobileRestClient.create_session方法代码示例

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_rolling_ttl_remove_expirary(params_from_base_test_setup, sg_conf_name):
    """
    1. PUT /db/doc1 via SG with property "_exp":3
    2. Once per second for 10 seconds, update /db/doc1 with a new revision (also with "_exp":3)
    3. Update /db/doc1 with a revision with no expiry
    3. Get /db/doc1.  Assert response is 200
    """

    cluster_config = params_from_base_test_setup["cluster_config"]
    mode = params_from_base_test_setup["mode"]
    sg_conf = sync_gateway_config_path_for_mode(sg_conf_name, mode)

    cluster_helper = ClusterKeywords()
    topology = cluster_helper.get_cluster_topology(cluster_config)

    cluster_helper.reset_cluster(
        cluster_config=cluster_config,
        sync_gateway_config=sg_conf
    )

    cbs_url = topology["couchbase_servers"][0]
    sg_url = topology["sync_gateways"][0]["public"]
    sg_url_admin = topology["sync_gateways"][0]["admin"]

    log_info("Running 'test_rolling_ttl_remove_expirary'")
    log_info("cbs_url: {}".format(cbs_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_url_admin: {}".format(sg_url_admin))

    sg_db = "db"
    sg_user_name = "sg_user"
    sg_user_password = "[email protected]"
    sg_user_channels = ["NBC", "ABC"]

    client = MobileRestClient()

    client.create_user(url=sg_url_admin, db=sg_db, name=sg_user_name, password=sg_user_password, channels=sg_user_channels)
    sg_user_session = client.create_session(url=sg_url_admin, db=sg_db, name=sg_user_name)

    doc_exp_3_body = document.create_doc(doc_id="exp_3", expiry=3, channels=sg_user_channels)
    doc_exp_10_body = document.create_doc(doc_id="exp_10", expiry=10, channels=sg_user_channels)

    doc_exp_3 = client.add_doc(url=sg_url, db=sg_db, doc=doc_exp_3_body, auth=sg_user_session)
    doc_exp_10 = client.add_doc(url=sg_url, db=sg_db, doc=doc_exp_10_body, auth=sg_user_session)

    client.update_doc(url=sg_url, db=sg_db, doc_id=doc_exp_3["id"], number_updates=10, expiry=3, delay=1, auth=sg_user_session)
    client.update_doc(url=sg_url, db=sg_db, doc_id=doc_exp_3["id"], number_updates=1, auth=sg_user_session)

    # If expiry was not removed in the last update, this would expire doc_exp_3
    time.sleep(5)

    # doc_exp_3 should still be around due to removal of expiry
    doc_exp_3 = client.get_doc(url=sg_url, db=sg_db, doc_id=doc_exp_3["id"], auth=sg_user_session)
    assert doc_exp_3["_id"] == "exp_3"

    # doc_exp_10 should be expired due to the updates (10s) + sleep (5s)
    with pytest.raises(HTTPError) as he:
        client.get_doc(url=sg_url, db=sg_db, doc_id=doc_exp_10["id"], auth=sg_user_session)
    assert he.value[0].startswith("404 Client Error: Not Found for url:")

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_rolling_ttl_expires(params_from_base_test_setup, sg_conf_name):
    """
    1. PUT /db/doc1 via SG with property "_exp":3
    2. Update /db/doc1 10 times with a new revision (also with "_exp":3)
    3. Wait 5 seconds
    4. Get /db/doc1.  Assert response is 200
    """

    cluster_config = params_from_base_test_setup["cluster_config"]
    mode = params_from_base_test_setup["mode"]
    sg_conf = sync_gateway_config_path_for_mode(sg_conf_name, mode)

    cluster_helper = ClusterKeywords()
    topology = cluster_helper.get_cluster_topology(cluster_config)

    cluster_helper.reset_cluster(
        cluster_config=cluster_config,
        sync_gateway_config=sg_conf
    )

    cbs_url = topology["couchbase_servers"][0]
    sg_url = topology["sync_gateways"][0]["public"]
    sg_url_admin = topology["sync_gateways"][0]["admin"]

    log_info("Running 'test_rolling_ttl_expires'")
    log_info("cbs_url: {}".format(cbs_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_url_admin: {}".format(sg_url_admin))

    sg_db = "db"
    sg_user_name = "sg_user"
    sg_user_password = "[email protected]"
    sg_user_channels = ["NBC", "ABC"]

    client = MobileRestClient()

    client.create_user(url=sg_url_admin, db=sg_db, name=sg_user_name, password=sg_user_password, channels=sg_user_channels)
    sg_user_session = client.create_session(url=sg_url_admin, db=sg_db, name=sg_user_name)

    doc_exp_3_body = document.create_doc(doc_id="exp_3", expiry=3, channels=sg_user_channels)
    doc_exp_10_body = document.create_doc(doc_id="exp_10", expiry=10, channels=sg_user_channels)

    doc_exp_3 = client.add_doc(url=sg_url, db=sg_db, doc=doc_exp_3_body, auth=sg_user_session)
    doc_exp_10 = client.add_doc(url=sg_url, db=sg_db, doc=doc_exp_10_body, auth=sg_user_session)

    client.update_doc(url=sg_url, db=sg_db, doc_id=doc_exp_3["id"], number_updates=10, expiry=3, auth=sg_user_session)

    # Sleep should allow doc_exp_3 to expire, but still be in the window to get doc_exp_10
    time.sleep(5)

    # doc_exp_3 should be expired
    with pytest.raises(HTTPError) as he:
        client.get_doc(url=sg_url, db=sg_db, doc_id=doc_exp_3["id"], auth=sg_user_session)
    assert he.value[0].startswith("404 Client Error: Not Found for url:")

    # doc_exp_10 should be available still
    doc_exp_10_result = client.get_doc(url=sg_url, db=sg_db, doc_id=doc_exp_10["id"], auth=sg_user_session)
    assert doc_exp_10_result["_id"] == "exp_10"

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_removing_expiry(params_from_base_test_setup, sg_conf_name):
    """
    1. PUT /db/doc1 via SG with property "_exp":3
    2. Update /db/doc1 with a new revision with no expiry value
    3. After 10 updates, update /db/doc1 with a revision with no expiry
    """

    cluster_config = params_from_base_test_setup["cluster_config"]
    mode = params_from_base_test_setup["mode"]
    sg_conf = sync_gateway_config_path_for_mode(sg_conf_name, mode)

    cluster_helper = ClusterKeywords()
    topology = cluster_helper.get_cluster_topology(cluster_config)

    cluster_helper.reset_cluster(
        cluster_config=cluster_config,
        sync_gateway_config=sg_conf
    )

    cbs_url = topology["couchbase_servers"][0]
    sg_url = topology["sync_gateways"][0]["public"]
    sg_url_admin = topology["sync_gateways"][0]["admin"]

    log_info("Running 'test_removing_expiry'")
    log_info("cbs_url: {}".format(cbs_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_url_admin: {}".format(sg_url_admin))

    sg_db = "db"
    sg_user_name = "sg_user"
    sg_user_password = "[email protected]"
    sg_user_channels = ["NBC", "ABC"]

    client = MobileRestClient()

    client.create_user(url=sg_url_admin, db=sg_db, name=sg_user_name, password=sg_user_password, channels=sg_user_channels)
    sg_user_session = client.create_session(url=sg_url_admin, db=sg_db, name=sg_user_name)

    doc_exp_3_body = document.create_doc(doc_id="exp_3", expiry=3, channels=sg_user_channels)
    doc_exp_10_body = document.create_doc(doc_id="exp_10", expiry=10, channels=sg_user_channels)

    doc_exp_3 = client.add_doc(url=sg_url, db=sg_db, doc=doc_exp_3_body, auth=sg_user_session)
    doc_exp_10 = client.add_doc(url=sg_url, db=sg_db, doc=doc_exp_10_body, auth=sg_user_session)

    doc_exp_3_updated = client.update_doc(url=sg_url, db=sg_db, doc_id=doc_exp_3["id"], number_updates=10, auth=sg_user_session)

    # Sleep should allow an expiry to happen on doc_exp_3 if it had not been removed.
    # Expected behavior is that the doc_exp_3 will still be around due to the removal of the expiry
    time.sleep(5)

    # doc_exp_3 should no longer have an expiry and should not raise an exception
    doc_exp_3_updated_result = client.get_doc(url=sg_url, db=sg_db, doc_id=doc_exp_3_updated["id"], auth=sg_user_session)
    assert doc_exp_3_updated_result["_id"] == "exp_3"

    # doc_exp_10 should be available still and should not raise an exception
    doc_exp_10_result = client.get_doc(url=sg_url, db=sg_db, doc_id=doc_exp_10["id"], auth=sg_user_session)
    assert doc_exp_10_result["_id"] == "exp_10"

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_writing_attachment_to_couchbase_server(params_from_base_test_setup, sg_conf_name):
    """
    1. Start sync_gateway with sync function that rejects all writes:
    function(doc, oldDoc) {
      throw({forbidden:"No writes!"});
    }
    2. Create a doc with attachment
    3. Use CBS sdk to see if attachment doc exists.  Doc ID will look like _sync:att:sha1-Kq5sNclPz7QV2+lfQIuc6R7oRu0= (where the suffix is the digest)
    4. Assert att doc does not exist
    """

    cluster_config = params_from_base_test_setup["cluster_config"]
    mode = params_from_base_test_setup["mode"]

    sg_conf = sync_gateway_config_path_for_mode(sg_conf_name, mode)

    cluster_helper = ClusterKeywords()
    cluster_helper.reset_cluster(cluster_config, sg_conf)

    topology = cluster_helper.get_cluster_topology(cluster_config)

    cbs_url = topology["couchbase_servers"][0]
    sg_url = topology["sync_gateways"][0]["public"]
    sg_url_admin = topology["sync_gateways"][0]["admin"]
    sg_db = "db"
    bucket = "data-bucket"

    log_info("Running 'test_writing_attachment_to_couchbase_server'")
    log_info("Using cbs_url: {}".format(cbs_url))
    log_info("Using sg_url: {}".format(sg_url))
    log_info("Using sg_url_admin: {}".format(sg_url_admin))
    log_info("Using sg_db: {}".format(sg_db))
    log_info("Using bucket: {}".format(bucket))

    sg_user_name = "sg_user"
    sg_user_password = "sg_user_password"

    sg_user_channels = ["NBC"]

    client = MobileRestClient()

    client.create_user(url=sg_url_admin, db=sg_db, name=sg_user_name, password=sg_user_password, channels=sg_user_channels)
    sg_user_session = client.create_session(url=sg_url_admin, db=sg_db, name=sg_user_name)

    docs = client.add_docs(url=sg_url, db=sg_db, number=100, id_prefix=sg_db, channels=sg_user_channels, auth=sg_user_session)
    assert len(docs) == 100

    # Create doc with attachment and push to sync_gateway
    doc_with_att = document.create_doc(doc_id="att_doc", content={"sample_key": "sample_val"}, attachment_name="sample_text.txt", channels=sg_user_channels)

    client.add_doc(url=sg_url, db=sg_db, doc=doc_with_att, auth=sg_user_session)
    server = CouchbaseServer(cbs_url)

    # Assert that the attachment doc gets written to couchbase server
    server_att_docs = server.get_server_docs_with_prefix(bucket=bucket, prefix="_sync:att:")
    num_att_docs = len(server_att_docs)
    assert num_att_docs == 1

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_load_balance_sanity(params_from_base_test_setup):

    cluster_config = params_from_base_test_setup["cluster_config"]
    mode = params_from_base_test_setup["mode"]

    sg_conf_name = "sync_gateway_default_functional_tests"
    sg_conf_path = sync_gateway_config_path_for_mode(sg_conf_name, mode)

    cluster_util = ClusterKeywords()
    cluster_util.reset_cluster(
        cluster_config=cluster_config,
        sync_gateway_config=sg_conf_path
    )

    topology = cluster_util.get_cluster_topology(cluster_config)
    admin_sg_one = topology["sync_gateways"][0]["admin"]
    lb_url = topology["load_balancers"][0]

    sg_db = "db"
    num_docs = 1000
    sg_user_name = "seth"
    sg_user_password = "password"
    channels = ["ABC", "CBS"]

    client = MobileRestClient()

    user = client.create_user(admin_sg_one, sg_db, sg_user_name, sg_user_password, channels=channels)
    session = client.create_session(admin_sg_one, sg_db, sg_user_name)

    log_info(user)
    log_info(session)

    log_info("Adding docs to the load balancer ...")

    ct = ChangesTracker(url=lb_url, db=sg_db, auth=session)

    with concurrent.futures.ThreadPoolExecutor(max_workers=5) as executor:
        log_info("Starting ...")
        ct_task = executor.submit(ct.start)
        log_info("Adding docs ...")
        docs = client.add_docs(lb_url, sg_db, num_docs, "test_doc", channels=channels, auth=session)
        assert len(docs) == num_docs

        log_info("Adding docs done")
        wait_for_changes = executor.submit(ct.wait_until, docs)

        if wait_for_changes.result():
            log_info("Stopping ...")
            log_info("Found all docs ...")
            executor.submit(ct.stop)
            ct_task.result()
        else:
            executor.submit(ct.stop)
            ct_task.result()
            raise Exception("Could not find all changes in feed before timeout!!")

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_setting_expiry_in_bulk_docs(params_from_base_test_setup, sg_conf_name):
    """
    1. PUT /db/_bulk_docs with 10 documents.  Set the "_exp":3 on 5 of these documents
    2. Wait five seconds
    3. POST /db/_bulk_get for the 10 documents.  Validate that only the 5 non-expiring documents are returned
    """

    cluster_config = params_from_base_test_setup["cluster_config"]
    mode = params_from_base_test_setup["mode"]
    sg_conf = sync_gateway_config_path_for_mode(sg_conf_name, mode)

    cluster_helper = ClusterKeywords()
    topology = cluster_helper.get_cluster_topology(cluster_config)

    cluster_helper.reset_cluster(
        cluster_config=cluster_config,
        sync_gateway_config=sg_conf
    )

    cbs_url = topology["couchbase_servers"][0]
    sg_url = topology["sync_gateways"][0]["public"]
    sg_url_admin = topology["sync_gateways"][0]["admin"]

    log_info("Running 'test_setting_expiry_in_bulk_docs'")
    log_info("cbs_url: {}".format(cbs_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_url_admin: {}".format(sg_url_admin))

    sg_db = "db"
    sg_user_name = "sg_user"
    sg_user_password = "[email protected]"
    sg_user_channels = ["NBC", "ABC"]

    client = MobileRestClient()

    client.create_user(url=sg_url_admin, db=sg_db, name=sg_user_name, password=sg_user_password, channels=sg_user_channels)
    sg_user_session = client.create_session(url=sg_url_admin, db=sg_db, name=sg_user_name)

    doc_exp_3_bodies = document.create_docs(doc_id_prefix="exp_3", number=5, expiry=3, channels=sg_user_channels)
    doc_exp_10_bodies = document.create_docs(doc_id_prefix="exp_10", number=5, expiry=10, channels=sg_user_channels)

    bulk_bodies = doc_exp_3_bodies + doc_exp_10_bodies

    bulk_docs = client.add_bulk_docs(url=sg_url, db=sg_db, docs=bulk_bodies, auth=sg_user_session)

    # Allow exp_3 docs to expire
    time.sleep(5)

    bulk_get_docs = client.get_bulk_docs(url=sg_url, db=sg_db, docs=bulk_docs, auth=sg_user_session)

    expected_ids = ["exp_10_0", "exp_10_1", "exp_10_2", "exp_10_3", "exp_10_4"]
    expected_missing_ids = ["exp_3_0", "exp_3_1", "exp_3_2", "exp_3_3", "exp_3_4"]

    client.verify_doc_ids_found_in_response(response=bulk_get_docs, expected_doc_ids=expected_ids)
    client.verify_doc_ids_not_found_in_response(response=bulk_get_docs, expected_missing_doc_ids=expected_missing_ids)

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_auto_prune_with_pull(setup_client_syncgateway_test):
    """Sanity test for autopruning with replication

    1. Create a database on LiteServ (ls_db)
    2. Add doc to sync gateway
    3. Update doc 50 times on sync_gateway
    4. Set up pull replication from sync_gateway db to LiteServ db
    5. Verify number of revisions on client is default (20)
    """

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_admin_url = setup_client_syncgateway_test["sg_admin_url"]

    client = MobileRestClient()
    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config, url=sg_url, config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_auto_prune_listener_sanity' ...")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_admin_url: {}".format(sg_admin_url))

    num_docs = 1
    num_revs = 50

    sg_user_channels = ["NBC"]
    sg_db = "db"
    sg_user_name = "sg_user"

    client.create_user(url=sg_admin_url, db=sg_db, name=sg_user_name, password="password", channels=sg_user_channels)
    sg_session = client.create_session(url=sg_admin_url, db=sg_db, name=sg_user_name)

    ls_db = client.create_database(url=ls_url, name="ls_db")

    sg_db_docs = client.add_docs(
        url=sg_url, db=sg_db, number=num_docs, id_prefix=sg_db, channels=sg_user_channels, auth=sg_session
    )
    assert len(sg_db_docs) == num_docs

    sg_docs_update = client.update_docs(url=sg_url, db=sg_db, docs=sg_db_docs, number_updates=num_revs, auth=sg_session)

    # Start continuous replication ls_db <- sg_db
    repl_one = client.start_replication(url=ls_url, continuous=True, from_url=sg_admin_url, from_db=sg_db, to_db=ls_db)

    client.wait_for_replication_status_idle(url=ls_url, replication_id=repl_one)
    client.verify_docs_present(url=ls_url, db=ls_db, expected_docs=sg_docs_update)
    client.verify_revs_num_for_docs(url=ls_url, db=ls_db, docs=sg_docs_update, expected_revs_per_doc=20)

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_auto_prune_listener_keeps_conflicts_sanity(setup_client_syncgateway_test):
    """"
    1. Create db on LiteServ and add docs
    2. Create db on sync_gateway and add docs with the same id
    3. Create one shot push / pull replication
    4. Update LiteServ 50 times
    5. Assert that pruned conflict is still present
    6. Delete the current revision and check that a GET returns the old conflict as the current rev
    """

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_admin_url = setup_client_syncgateway_test["sg_admin_url"]

    client = MobileRestClient()
    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config, url=sg_url, config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_auto_prune_listener_keeps_conflicts_sanity' ...")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_admin_url: {}".format(sg_admin_url))

    num_docs = 1
    num_revs = 100
    sg_db = "db"
    ls_db = "ls_db"
    sg_user_name = "sg_user"
    sg_user_channels = ["NBC"]
    client.create_user(url=sg_admin_url, db=sg_db, name=sg_user_name, password="password", channels=sg_user_channels)

    sg_session = client.create_session(url=sg_admin_url, db=sg_db, name=sg_user_name)
    ls_db = client.create_database(url=ls_url, name=ls_db)

    # Create docs with same prefix to create conflicts when the dbs complete 1 shot replication
    ls_db_docs = client.add_docs(url=ls_url, db=ls_db, number=num_docs, id_prefix="doc", channels=sg_user_channels)
    assert len(ls_db_docs) == num_docs

    sg_db_docs = client.add_docs(
        url=sg_url, db=sg_db, number=num_docs, id_prefix="doc", channels=sg_user_channels, auth=sg_session
    )
    assert len(sg_db_docs) == num_docs

    # Setup one shot pull replication and wait for idle.
    client.start_replication(url=ls_url, continuous=False, from_url=sg_admin_url, from_db=sg_db, to_db=ls_db)

    client.wait_for_no_replications(url=ls_url)

    # There should now be a conflict on the client
    conflicting_revs = client.get_conflict_revs(url=ls_url, db=ls_db, doc=ls_db_docs[0])

    # Get the doc with conflict rev
    client.get_doc(url=ls_url, db=ls_db, doc_id=ls_db_docs[0]["id"], rev=conflicting_revs[0])

    # Update doc past revs limit and make sure conflict is still available
    updated_doc = client.update_doc(url=ls_url, db=ls_db, doc_id=ls_db_docs[0]["id"], number_updates=num_revs)
    client.get_doc(url=ls_url, db=ls_db, doc_id=ls_db_docs[0]["id"], rev=conflicting_revs[0])

    # Delete doc and ensure that the conflict is now the current rev
    client.delete_doc(url=ls_url, db=ls_db, doc_id=ls_db_docs[0]["id"], rev=updated_doc["rev"])
    current_doc = client.get_doc(url=ls_url, db=ls_db, doc_id=ls_db_docs[0]["id"])
    assert current_doc["_rev"] == conflicting_revs[0]

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_server_goes_down_sanity(params_from_base_test_setup):
    """
    1. Start with a two node couchbase server cluster
    2. Starting adding docs
    3. Kill one of the server nodes and signal completion
    4. Stop adding docs
    5. Verify that that the expected docs are present and in the changes feed.
    6. Start server again and add to cluster
    """

    cluster_config = params_from_base_test_setup["cluster_config"]
    mode = params_from_base_test_setup["mode"]

    cluster_helper = ClusterKeywords()

    sg_conf_name = "sync_gateway_default_functional_tests"
    sg_conf_path = sync_gateway_config_path_for_mode(sg_conf_name, mode)

    cluster_helper.reset_cluster(cluster_config=cluster_config,
                                 sync_gateway_config=sg_conf_path)

    topology = cluster_helper.get_cluster_topology(cluster_config)

    admin_sg = topology["sync_gateways"][0]["admin"]
    sg_url = topology["sync_gateways"][0]["public"]
    coucbase_servers = topology["couchbase_servers"]

    cbs_one_url = coucbase_servers[0]
    cbs_two_url = coucbase_servers[1]

    log_info("Running: 'test_server_goes_down_sanity'")
    log_info("cluster_config: {}".format(cluster_config))
    log_info("admin_sg: {}".format(admin_sg))
    log_info("sg_url: {}".format(sg_url))
    log_info("cbs_one_url: {}".format(cbs_one_url))
    log_info("cbs_two_url: {}".format(cbs_two_url))

    sg_db = "db"
    num_docs = 100
    sg_user_name = "seth"
    sg_user_password = "password"
    channels = ["ABC", "CBS"]

    client = MobileRestClient()
    main_server = CouchbaseServer(cbs_one_url)
    flakey_server = CouchbaseServer(cbs_two_url)

    client.create_user(admin_sg, sg_db, sg_user_name, sg_user_password, channels=channels)
    session = client.create_session(admin_sg, sg_db, sg_user_name)

    # Stop second server
    flakey_server.stop()

    # Try to add 100 docs in a loop until all succeed, if the never do, fail with timeout
    errors = num_docs

    # Wait 30 seconds for auto failover
    # (Minimum value suggested - http://docs.couchbase.com/admin/admin/Tasks/tasks-nodeFailover.html)
    # + 15 seconds to add docs
    timeout = 45
    start = time.time()

    successful_add = False
    while not successful_add:

        # Fail tests if all docs do not succeed before timeout
        if (time.time() - start) > timeout:
            # Bring server back up before failing the test
            flakey_server.start()
            main_server.rebalance_in(coucbase_servers, flakey_server)
            raise TimeoutError("Failed to successfully put docs before timeout")

        try:
            docs = client.add_docs(url=sg_url, db=sg_db, number=num_docs, id_prefix=None, auth=session, channels=channels)

            # If the above add doc does not throw, it was a successfull add.
            successful_add = True
        except requests.exceptions.HTTPError as he:
            log_info("Failed to add docs: {}".format(he))

        log_info("Seeing: {} errors".format(errors))
        time.sleep(1)

    assert len(docs) == 100
    client.verify_docs_present(url=sg_url, db=sg_db, expected_docs=docs, auth=session)

    try:
        client.verify_docs_in_changes(url=sg_url, db=sg_db, expected_docs=docs, auth=session, polling_interval=5)
    except keywords.exceptions.TimeoutException:
        # timeout verifying docs. Bring server back in to restore topology, then fail
        # Failing due to https://github.com/couchbase/sync_gateway/issues/2197
        flakey_server.start()
        main_server.recover(flakey_server)
        main_server.rebalance_in(coucbase_servers, flakey_server)
        raise keywords.exceptions.TimeoutException("Failed to get all changes")

    # Test succeeded without timeout, bring server back into topology
    flakey_server.start()
    main_server.recover(flakey_server)
    main_server.rebalance_in(coucbase_servers, flakey_server)
#.........这里部分代码省略.........

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_take_all_sgaccels_down(params_from_base_test_setup, sg_conf):
    """
    Scenario that takes all sync_gateway accel nodes offline during doc load.
    After bring the nodes back online during load, the reshard of the DCP feed is verified.
    The changes feed is verified that all docs show up.

    1. Start doc load (1000 doc)
    2. Take all sg_accel nodes down in parallel
    3. Verify node are down
    4. Wait for doc adds to complete, store "doc_push_result_1"
    5. Verify "doc_push_result_1" docs added
    6. Start doc load (1000 docs)
    7. Wait for 5. to complete, store "doc_push_result_2"
    8. Verify "doc_push_result_2" docs added
    9. Start another doc load (1000 docs)
    10. Bring up nodes in parallel
    11. poll on p-index reshard
    12. Wait for 9. to complete, store "doc_push_result_3"
    13. Verify "doc_push_result_3" docs added
    14. Verify "doc_push_result_1" + "doc_push_result_2" + "doc_push_result_3" show up in _changes feed
    """

    cluster_conf = params_from_base_test_setup["cluster_config"]

    log_info("Running 'test_dcp_reshard_single_sg_accel_goes_down_and_up'")
    log_info("cluster_conf: {}".format(cluster_conf))

    log_info("sg_conf: {}".format(sg_conf))

    cluster = Cluster(config=cluster_conf)
    cluster.reset(sg_config_path=sg_conf)

    cluster_util = ClusterKeywords()
    topology = cluster_util.get_cluster_topology(cluster_conf)

    sg_url = topology["sync_gateways"][0]["public"]
    sg_admin_url = topology["sync_gateways"][0]["admin"]
    sg_db = "db"
    num_docs = 1000

    client = MobileRestClient()

    doc_pusher_user_info = userinfo.UserInfo("doc_pusher", "pass", channels=["A"], roles=[])
    doc_pusher_auth = client.create_user(
        url=sg_admin_url,
        db=sg_db,
        name=doc_pusher_user_info.name,
        password=doc_pusher_user_info.password,
        channels=doc_pusher_user_info.channels
    )

    a_user_info = userinfo.UserInfo("a_user", "pass", channels=["A"], roles=[])
    client.create_user(
        url=sg_admin_url,
        db=sg_db,
        name=a_user_info.name,
        password=a_user_info.password,
        channels=a_user_info.channels
    )
    a_user_session = client.create_session(
        url=sg_admin_url,
        db=sg_db,
        name=a_user_info.name,
        password=a_user_info.password
    )

    # Shutdown all accel nodes in parallel
    with concurrent.futures.ThreadPoolExecutor(max_workers=3) as ex:

        # Start adding docs
        docs_1 = document.create_docs(None, num_docs, channels=doc_pusher_user_info.channels)
        docs_1_task = ex.submit(client.add_bulk_docs, url=sg_url, db=sg_db, docs=docs_1, auth=doc_pusher_auth)

        # Take down all access nodes
        log_info("Shutting down sg_accels: [{}, {}, {}] ...".format(
            cluster.sg_accels[0],
            cluster.sg_accels[1],
            cluster.sg_accels[2]
        ))
        sg_accel_down_task_1 = ex.submit(cluster.sg_accels[0].stop)
        sg_accel_down_task_2 = ex.submit(cluster.sg_accels[1].stop)
        sg_accel_down_task_3 = ex.submit(cluster.sg_accels[2].stop)
        assert sg_accel_down_task_1.result() == 0
        assert sg_accel_down_task_2.result() == 0
        assert sg_accel_down_task_3.result() == 0

        # Block until bulk_docs is complete
        doc_push_result_1 = docs_1_task.result()
        assert len(doc_push_result_1) == num_docs
        client.verify_docs_present(url=sg_url, db=sg_db, expected_docs=doc_push_result_1, auth=doc_pusher_auth)

        # Load sync_gateway with another batch of docs while the sg_accel nodes are offline
        docs_2_bodies = document.create_docs(None, num_docs, channels=doc_pusher_user_info.channels)
        docs_push_result_2 = client.add_bulk_docs(url=sg_url, db=sg_db, docs=docs_2_bodies, auth=doc_pusher_auth)
        assert len(docs_push_result_2) == num_docs
        client.verify_docs_present(url=sg_url, db=sg_db, expected_docs=docs_push_result_2, auth=doc_pusher_auth)

        # Start loading Sync Gateway with another set of docs while bringing the sg_accel nodes online
        docs_3 = document.create_docs(None, num_docs, channels=doc_pusher_user_info.channels)
        docs_3_task = ex.submit(client.add_bulk_docs, url=sg_url, db=sg_db, docs=docs_3, auth=doc_pusher_auth)
#.........这里部分代码省略.........

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_client_to_sync_gateway_complex_replication_with_revs_limit(setup_client_syncgateway_test):
    """ Ported from sync_gateway tests repo
    ...  1.  Clear server buckets
    ...  2.  Restart liteserv with _session
    ...  3.  Restart sync_gateway wil that config
    ...  4.  Create db on LiteServ
    ...  5.  Add numDocs to LiteServ db
    ...  6.  Setup push replication from LiteServ db to sync_gateway
    ...  7.  Verify doc present on sync_gateway (number of docs)
    ...  8.  Update sg docs numRevs * 4 = 480
    ...  9.  Update docs on LiteServ db numRevs * 4 = 480
    ...  10. Setup pull replication from sg -> liteserv db
    ...  11. Verify all docs are replicated
    ...  12. compact LiteServ db (POST _compact)
    ...  13. Verify number of revs in LiteServ db (?revs_info=true) check rev status == available fail if revs available > revs limit
    ...  14. Delete LiteServ db conflicts (?conflicts=true) DELETE _conflicts
    ...  15. Create numDoc number of docs in LiteServ db
    ...  16. Update LiteServ db docs numRevs * 5 (600)
    ...  17. Verify LiteServ db revs is < 602
    ...  18. Verify LiteServ db docs revs prefix (9 * numRevs + 3)
    ...  19. Compact LiteServ db
    ...  20. Verify number of revs <= 10
    ...  21. Delete LiteServ docs
    ...  22. Delete Server bucket
    ...  23. Delete LiteServ db
    """

    ls_db_name = "ls_db"
    sg_db = "db"
    sg_user_name = "sg_user"
    num_docs = 10
    num_revs = 100

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_admin_url = setup_client_syncgateway_test["sg_admin_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_url,
        config="{}/walrus-revs-limit.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_client_to_sync_gateway_complex_replication_with_revs_limit'")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_admin_url: {}".format(sg_admin_url))
    log_info("sg_url: {}".format(sg_url))

    client = MobileRestClient()

    # Test the endpoint, listener does not support users but should have a default response
    client.get_session(url=ls_url)

    sg_user_channels = ["NBC"]
    client.create_user(url=sg_admin_url, db=sg_db, name=sg_user_name, password="password", channels=sg_user_channels)
    sg_session = client.create_session(url=sg_admin_url, db=sg_db, name=sg_user_name)

    ls_db = client.create_database(url=ls_url, name=ls_db_name)
    ls_db_docs = client.add_docs(url=ls_url, db=ls_db, number=num_docs, id_prefix=ls_db, channels=sg_user_channels)
    assert len(ls_db_docs) == num_docs

    # Start replication ls_db -> sg_db
    repl_one = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_admin_url, to_db=sg_db
    )

    client.verify_docs_present(url=sg_admin_url, db=sg_db, expected_docs=ls_db_docs)

    # Delay is to the updates here due to couchbase/couchbase-lite-ios#1277.
    # Basically, if your revs depth is small and someone is updating a doc past the revs depth before a push replication,
    # the push replication will have no common ancestor with sync_gateway causing conflicts to be created.
    # Adding a delay between updates helps this situation. There is an alternative for CBL mac and CBL NET to change the default revs client depth
    # but that is not configurable for Android.
    # Currently adding a delay will allow the replication to act as expected for all platforms now.
    client.update_docs(url=sg_url, db=sg_db, docs=ls_db_docs, number_updates=num_revs, delay=0.1, auth=sg_session)
    client.update_docs(url=ls_url, db=ls_db, docs=ls_db_docs, number_updates=num_revs, delay=0.1)

    # Start replication ls_db <- sg_db
    repl_two = client.start_replication(
        url=ls_url,
        continuous=True,
        from_url=sg_admin_url, from_db=sg_db,
        to_db=ls_db
    )

    client.wait_for_replication_status_idle(url=ls_url, replication_id=repl_one)
    client.wait_for_replication_status_idle(url=ls_url, replication_id=repl_two)

    client.compact_database(url=ls_url, db=ls_db)

    # LiteServ should only have 20 revisions due to built in client revs limit
    client.verify_revs_num_for_docs(url=ls_url, db=ls_db, docs=ls_db_docs, expected_revs_per_doc=20)

    # Sync Gateway should have 100 revisions due to the specified revs_limit in the sg config and possible conflict winners from the liteserv db
    client.verify_max_revs_num_for_docs(url=sg_url, db=sg_db, docs=ls_db_docs, expected_max_number_revs_per_doc=100, auth=sg_session)
#.........这里部分代码省略.........

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_initial_push_replication(setup_client_syncgateway_test, continuous):
    """
    1. Prepare LiteServ to have 10000 documents.
    2. Create a single shot push / continuous replicator and to push the docs into a sync_gateway database.
    3. Verify if all of the docs get pushed.
    """

    sg_db = "db"
    ls_db = "ls_db"
    seth_channels = ["ABC", "NBC"]

    num_docs = 10000

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_one_admin = setup_client_syncgateway_test["sg_admin_url"]
    sg_one_public = setup_client_syncgateway_test["sg_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_one_public,
        config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_initial_push_replication', continuous: {}".format(continuous))
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_one_admin: {}".format(sg_one_admin))
    log_info("sg_one_public: {}".format(sg_one_public))

    client = MobileRestClient()
    client.create_user(sg_one_admin, sg_db, "seth", password="password", channels=seth_channels)
    session = client.create_session(sg_one_admin, sg_db, "seth")

    client.create_database(url=ls_url, name=ls_db)

    # Create 'num_docs' docs on LiteServ
    docs = client.add_docs(
        url=ls_url,
        db=ls_db,
        number=num_docs,
        id_prefix="seeded_doc",
        generator="four_k",
        channels=seth_channels
    )
    assert len(docs) == num_docs

    # Start push replication
    repl_id = client.start_replication(
        url=ls_url,
        continuous=continuous,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db
    )

    if continuous:
        log_info("Waiting for replication status 'Idle' for: {}".format(repl_id))
        client.wait_for_replication_status_idle(ls_url, repl_id)
    else:
        log_info("Waiting for no replications: {}".format(repl_id))
        client.wait_for_no_replications(ls_url)

    # Verify docs replicated to sync_gateway
    client.verify_docs_present(url=sg_one_public, db=sg_db, expected_docs=docs, auth=session)

    # Verify docs show up in sync_gateway's changes feed
    client.verify_docs_in_changes(url=sg_one_public, db=sg_db, expected_docs=docs, auth=session)

    replications = client.get_replications(url=ls_url)

    if continuous:
        assert len(replications) == 1, "There should only be one replication running"
        assert replications[0]["status"] == "Idle", "Replication Status should be 'Idle'"
        assert replications[0]["continuous"], "Running replication should be continuous"
        # Only .NET has an 'error' property
        if "error" in replications[0]:
            assert len(replications[0]["error"]) == 0
    else:
        assert len(replications) == 0, "No replications should be running"

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_backfill_channels_oneshot_changes(params_from_base_test_setup, sg_conf_name, grant_type):

    cluster_config = params_from_base_test_setup["cluster_config"]
    topology = params_from_base_test_setup["cluster_topology"]
    mode = params_from_base_test_setup["mode"]

    sg_url = topology["sync_gateways"][0]["public"]
    sg_admin_url = topology["sync_gateways"][0]["admin"]
    sg_db = "db"

    log_info("grant_type: {}".format(grant_type))

    sg_conf = sync_gateway_config_path_for_mode(sg_conf_name, mode)

    cluster = Cluster(cluster_config)
    cluster.reset(sg_conf)

    client = MobileRestClient()

    admin_user_info = userinfo.UserInfo("admin", "pass", channels=["A"], roles=[])
    user_b_user_info = userinfo.UserInfo("USER_B", "pass", channels=["B"], roles=[])

    # Create users / sessions
    client.create_user(url=sg_admin_url, db=sg_db,
                       name=admin_user_info.name, password=admin_user_info.password, channels=admin_user_info.channels)

    client.create_user(url=sg_admin_url, db=sg_db,
                       name=user_b_user_info.name, password=user_b_user_info.password, channels=user_b_user_info.channels)

    admin_session = client.create_session(url=sg_admin_url, db=sg_db, name=admin_user_info.name, password=admin_user_info.password)
    user_b_session = client.create_session(url=sg_admin_url, db=sg_db, name=user_b_user_info.name, password=user_b_user_info.password)

    # Create 50 "A" channel docs
    a_docs = client.add_docs(url=sg_url, db=sg_db, number=50, id_prefix=None, auth=admin_session, channels=["A"])
    assert len(a_docs) == 50

    b_docs = client.add_docs(url=sg_url, db=sg_db, number=1, id_prefix="b_doc", auth=user_b_session, channels=["B"])
    assert len(b_docs) == 1

    user_doc = {"id": "_user/USER_B", "rev": None}
    b_docs.append(user_doc)

    # Loop until user_b sees b_doc_0 doc and _user/USER_B doc
    client.verify_docs_in_changes(url=sg_url, db=sg_db, expected_docs=b_docs, auth=user_b_session, strict=True)

    # Get last_seq for user_b
    user_b_changes = client.get_changes(url=sg_url, db=sg_db, since=0, auth=user_b_session, feed="normal")

    # Grant access to channel "A"
    if grant_type == "CHANNEL-REST":
        log_info("Granting user access to channel A via Admin REST user update")
        # Grant via update to user in Admin API
        client.update_user(url=sg_admin_url, db=sg_db,
                           name=user_b_user_info.name, channels=["A", "B"])

    elif grant_type == "CHANNEL-SYNC":
        log_info("Granting user access to channel A sync function access()")
        # Grant via access() in sync_function, then id 'channel_access' will trigger an access(doc.users, doc.channels)
        access_doc = document.create_doc("channel_access", channels=["A"])
        access_doc["users"] = ["USER_B"]
        client.add_doc(url=sg_url, db=sg_db, doc=access_doc, auth=admin_session)

    elif grant_type == "ROLE-REST":
        log_info("Granting user access to channel A via Admin REST role grant")
        # Create role with channel A
        client.create_role(url=sg_admin_url, db=sg_db, name="channel-A-role", channels=["A"])
        client.update_user(url=sg_admin_url, db=sg_db, name="USER_B", roles=["channel-A-role"])

    elif grant_type == "ROLE-SYNC":
        log_info("Granting user access to channel A via sync function role() grant")
        # Create role with channel A
        client.create_role(url=sg_admin_url, db=sg_db, name="channel-A-role", channels=["A"])

        # Grant via role() in sync_function, then id 'role_access' will trigger an role(doc.users, doc.roles)
        role_access_doc = document.create_doc("role_access")
        role_access_doc["users"] = ["USER_B"]
        role_access_doc["roles"] = ["role:channel-A-role"]
        client.add_doc(sg_url, db=sg_db, doc=role_access_doc, auth=admin_session)

    else:
        pytest.fail("Unsupported grant_type!!!!")

    user_b_changes_after_grant = client.get_changes(url=sg_url, db=sg_db,
                                                    since=user_b_changes["last_seq"], auth=user_b_session, feed="normal")

    # User B shoud have recieved 51 docs (a_docs + 1 _user/USER_B doc) if a REST grant or 50 changes if the grant
    # is via the sync function
    changes_results = user_b_changes_after_grant["results"]
    assert 50 <= len(changes_results) <= 51

    # Create a dictionary of id rev pair of all the docs that are not "_user/" docs from changes
    ids_and_revs_from_user_changes = {
        change["id"]: change["changes"][0]["rev"]
        for change in changes_results if not change["id"].startswith("_user/")
    }

    assert len(ids_and_revs_from_user_changes) == 50

    # Create a list of id rev pair of all of the channel A docs
    ids_and_revs_from_a_docs = {doc["id"]: doc["rev"] for doc in a_docs}
#.........这里部分代码省略.........

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_string_expiry_as_iso_8601_date(params_from_base_test_setup, sg_conf_name):
    """
    1. Calculate (server time + 3 seconds) as ISO-8601 date (e.g. 2016-01-01T00:00:00.000+00:00)
    2. PUT /db/doc1 via SG with property "_exp":"[date]"
       PUT /db/doc2 via SG with property "_exp":"2026-01-01T00:00:00.000+00:00"
    3. Wait five seconds
    4. Get /db/doc1.  Assert response is 404
       Get /db/doc2.  Assert response is 20
    """

    cluster_config = params_from_base_test_setup["cluster_config"]
    mode = params_from_base_test_setup["mode"]
    sg_conf = sync_gateway_config_path_for_mode(sg_conf_name, mode)

    cluster_helper = ClusterKeywords()
    topology = cluster_helper.get_cluster_topology(cluster_config)

    cluster_helper.reset_cluster(
        cluster_config=cluster_config,
        sync_gateway_config=sg_conf
    )

    cbs_url = topology["couchbase_servers"][0]
    sg_url = topology["sync_gateways"][0]["public"]
    sg_url_admin = topology["sync_gateways"][0]["admin"]

    log_info("Running 'test_string_expiry_as_ISO_8601_Date'")
    log_info("cbs_url: {}".format(cbs_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_url_admin: {}".format(sg_url_admin))

    sg_db = "db"
    sg_user_name = "sg_user"
    sg_user_password = "[email protected]"
    sg_user_channels = ["NBC", "ABC"]

    client = MobileRestClient()

    client.create_user(url=sg_url_admin, db=sg_db, name=sg_user_name, password=sg_user_password, channels=sg_user_channels)
    sg_user_session = client.create_session(url=sg_url_admin, db=sg_db, name=sg_user_name)

    time_util = Time()
    iso_datetime = time_util.get_iso_datetime(delta=3)

    doc_exp_3_body = document.create_doc(doc_id="exp_3", expiry=iso_datetime, channels=sg_user_channels)
    doc_exp_years_body = document.create_doc(doc_id="exp_years", expiry="2026-01-01T00:00:00.000+00:00", channels=sg_user_channels)

    doc_exp_3 = client.add_doc(url=sg_url, db=sg_db, doc=doc_exp_3_body, auth=sg_user_session)
    doc_exp_years = client.add_doc(url=sg_url, db=sg_db, doc=doc_exp_years_body, auth=sg_user_session)

    # Sleep should allow doc_exp_3 to expire
    time.sleep(10)

    # doc_exp_3 should be expired
    with pytest.raises(HTTPError) as he:
        client.get_doc(url=sg_url, db=sg_db, doc_id=doc_exp_3["id"], auth=sg_user_session)
    assert he.value[0].startswith("404 Client Error: Not Found for url:")

    # doc_exp_years should be available still
    doc_exp_years_result = client.get_doc(url=sg_url, db=sg_db, doc_id=doc_exp_years["id"], auth=sg_user_session)
    assert doc_exp_years_result["_id"] == "exp_years"

# 需要导入模块: from keywords.MobileRestClient import MobileRestClient [as 别名]
# 或者: from keywords.MobileRestClient.MobileRestClient import create_session [as 别名]
def test_string_expiry_as_unix_date(params_from_base_test_setup, sg_conf_name):
    """
    1. Calculate (server time + 3 seconds) as unix time (i.e. Epoch time, e.g. 1466465122)
    2. PUT /db/doc1 via SG with property "_exp":"[unix time]"
       PUT /db/doc2 via SG with property "_exp":"1767225600"  (Jan 1 2026) Note: the maximum epoch time supported by CBS is maxUint32, or Sun 07 Feb 2106, in case you want to move it out further than 2026.
    3. Wait five seconds
    4. Get /db/doc1.  Assert response is 404
       Get /db/doc2.  Assert response is 200
    """

    cluster_config = params_from_base_test_setup["cluster_config"]
    mode = params_from_base_test_setup["mode"]
    sg_conf = sync_gateway_config_path_for_mode(sg_conf_name, mode)

    cluster_helper = ClusterKeywords()
    topology = cluster_helper.get_cluster_topology(cluster_config)

    cluster_helper.reset_cluster(
        cluster_config=cluster_config,
        sync_gateway_config=sg_conf
    )

    cbs_url = topology["couchbase_servers"][0]
    sg_url = topology["sync_gateways"][0]["public"]
    sg_url_admin = topology["sync_gateways"][0]["admin"]

    log_info("Running 'test_string_expiry_as_unix_date'")
    log_info("cbs_url: {}".format(cbs_url))
    log_info("sg_url: {}".format(sg_url))
    log_info("sg_url_admin: {}".format(sg_url_admin))

    sg_db = "db"
    sg_user_name = "sg_user"
    sg_user_password = "[email protected]"
    sg_user_channels = ["NBC", "ABC"]

    client = MobileRestClient()

    client.create_user(url=sg_url_admin, db=sg_db, name=sg_user_name, password=sg_user_password, channels=sg_user_channels)
    sg_user_session = client.create_session(url=sg_url_admin, db=sg_db, name=sg_user_name)

    time_util = Time()
    unix_time_3s_ahead = time_util.get_unix_timestamp(delta=3)

    # Convert unix timestamp to string
    unix_time_3s_ahead_string = str(unix_time_3s_ahead)

    # Using string representation for unix time
    doc_exp_3_body = document.create_doc(doc_id="exp_3", expiry=unix_time_3s_ahead_string, channels=sg_user_channels)
    doc_exp_years_body = document.create_doc(doc_id="exp_years", expiry="1767225600", channels=sg_user_channels)

    doc_exp_3 = client.add_doc(url=sg_url, db=sg_db, doc=doc_exp_3_body, auth=sg_user_session)
    doc_exp_years = client.add_doc(url=sg_url, db=sg_db, doc=doc_exp_years_body, auth=sg_user_session)

    # Sleep should allow doc_exp_3 to expire
    time.sleep(10)

    # doc_exp_3 should be expired
    with pytest.raises(HTTPError) as he:
        client.get_doc(url=sg_url, db=sg_db, doc_id=doc_exp_3["id"], auth=sg_user_session)
    assert he.value[0].startswith("404 Client Error: Not Found for url:")

    # doc_exp_years should be available still
    doc_exp_years_result = client.get_doc(url=sg_url, db=sg_db, doc_id=doc_exp_years["id"], auth=sg_user_session)
    assert doc_exp_years_result["_id"] == "exp_years"