Python OpTestIPMI.run_host_cmd_on_ipmi_console方法代码示例

# 需要导入模块: from common.OpTestIPMI import OpTestIPMI [as 别名]
# 或者: from common.OpTestIPMI.OpTestIPMI import run_host_cmd_on_ipmi_console [as 别名]
class OpTestDropbearSafety():
    ##  Initialize this object
    #  @param i_bmcIP The IP address of the BMC
    #  @param i_bmcUser The userid to log into the BMC with
    #  @param i_bmcPasswd The password of the userid to log into the BMC with
    #  @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
    #  @param i_bmcPasswdIpmi The password of BMC IPMI userid
    #  @param i_ffdcDir Optional param to indicate where to write FFDC
    #
    # "Only required for inband tests" else Default = None
    # @param i_hostIP The IP address of the HOST
    # @param i_hostuser The userid to log into the HOST
    # @param i_hostPasswd The password of the userid to log into the HOST with
    #
    def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostip=None,
                 i_hostuser=None, i_hostPasswd=None):
        self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
        self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
                                  i_ffdcDir, i_hostip, i_hostuser, i_hostPasswd)
        self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd, i_bmcIP)
        self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
                         i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
                         i_hostuser, i_hostPasswd)
        self.util = OpTestUtil()

    ##
    # @brief  This function will tests Dropbear running functionality in skiroot
    #         1. Power Off the system
    #         2. Power on the system
    #         3. Exit to the petitboot shell
    #         4. Execute ps command
    #         5. test will fail incase dropbear is running and listed out by ps
    #         6. At the end of test reboot the system to OS.
    #
    # @return BMC_CONST.FW_SUCCESS or raise OpTestError
    #
    def test_dropbear_running(self):
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()
        print "Test Dropbear running in Petitboot"
        print "Performing IPMI Power Off Operation"
        self.console = self.cv_SYSTEM.sys_get_ipmi_console()
        self.cv_SYSTEM.sys_ipmi_boot_system_to_petitboot(self.console)
        self.cv_IPMI.ipmi_host_set_unique_prompt(self.console)
        self.cv_IPMI.run_host_cmd_on_ipmi_console("uname -a")
        # we don't grep for 'dropbear' so that our naive line.count
        # below doesn't hit a false positive.
        res = self.cv_IPMI.run_host_cmd_on_ipmi_console("ps|grep drop")
        print res
        self.cv_IPMI.ipmi_set_boot_to_disk()
        for line in res:
            if line.count('dropbear'):
                raise OpTestError("drobear is running in the skiroot")
        return BMC_CONST.FW_SUCCESS

# 需要导入模块: from common.OpTestIPMI import OpTestIPMI [as 别名]
# 或者: from common.OpTestIPMI.OpTestIPMI import run_host_cmd_on_ipmi_console [as 别名]

#.........这里部分代码省略.........
        print "IPMI_Reprovision: Updating the nvram partition with test cfg data"
        self.cv_HOST.host_run_command(BMC_CONST.NVRAM_UPDATE_CONFIG_TEST_DATA)
        self.cv_HOST.host_run_command(BMC_CONST.NVRAM_PRINT_CFG)
        print "IPMI_Reprovision: issuing ipmi pnor reprovision request"
        self.cv_SYSTEM.sys_issue_ipmi_pnor_reprovision_request()
        print "IPMI_Reprovision: wait for reprovision to complete"
        self.cv_SYSTEM.sys_wait_for_ipmi_pnor_reprovision_to_complete()
        print "IPMI_Reprovision: gathering the opal message logs"
        self.cv_HOST.host_gather_opal_msg_log()
        print "IPMI_Reprovision: Performing a IPMI Power OFF Operation"
        # Perform a IPMI Power OFF Operation(Immediate Shutdown)
        self.cv_IPMI.ipmi_power_off()
        if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == BMC_CONST.FW_SUCCESS:
            print "IPMI_Reprovision: System is in standby/Soft-off state"
        else:
            l_msg = "IPMI_Reprovision: System failed to reach standby/Soft-off state after pnor reprovisioning"
            raise OpTestError(l_msg)

        print "IPMI_Reprovision: Performing a IPMI Power ON Operation"
        # Perform a IPMI Power ON Operation
        self.cv_IPMI.ipmi_power_on()
        self.cv_SYSTEM.sys_check_host_status()
        self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
        l_res = self.cv_HOST.host_run_command(BMC_CONST.NVRAM_PRINT_CFG)
        if l_res.__contains__(BMC_CONST.NVRAM_TEST_DATA):
            l_msg = "NVRAM Partition - IPMI Reprovision not happening, nvram test config data still exists"
            raise OpTestError(l_msg)
        print "NVRAM Partition - IPMI Reprovision is done, cleared the nvram test config data"
        self.cv_HOST.host_gather_opal_msg_log()
        return BMC_CONST.FW_SUCCESS

    ##
    # @brief This function will cover following test steps
    #        Testcase: GARD Partition-IPMI Reprovision
    #        1. Inject core checkstop using existed function from OpTestHMIHandling.py
    #        2. Do a Hard reboot(IPMI Power OFF/ON)
    #        2. Issue an IPMI PNOR Reprovision request command, to reset GUARD partition to default.
    #        3. Wait for IPMI PNOR Reprovision progress to complete(00).
    #        4. Check for GUARD parition whether the existing gard records erased or not.
    #        6. Reboot the system back to see system is booting fine or not.
    #
    # @return BMC_CONST.FW_SUCCESS or raise OpTestError
    #
    def test_gard_ipmi_reprovision(self):
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()
        print "IPMI_Reprovision: Injecting system core checkstop to guard the phyisical cpu"
        self.opTestHMIHandling.testHMIHandling(BMC_CONST.HMI_MALFUNCTION_ALERT)
        print "IPMI_Reprovision: Performing a IPMI Power OFF Operation"
        # Perform a IPMI Power OFF Operation(Immediate Shutdown)
        self.cv_IPMI.ipmi_power_off()
        if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == BMC_CONST.FW_SUCCESS:
            print "IPMI_Reprovision: System is in standby/Soft-off state"
        else:
            l_msg = "IPMI_Reprovision: System failed to reach standby/Soft-off state"
            raise OpTestError(l_msg)

        print "IPMI_Reprovision: Performing a IPMI Power ON Operation"
        # Perform a IPMI Power ON Operation
        self.cv_IPMI.ipmi_power_on()
        self.cv_SYSTEM.sys_check_host_status()
        self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
        print "IPMI_Reprovision: issuing ipmi pnor reprovision request"
        self.cv_SYSTEM.sys_issue_ipmi_pnor_reprovision_request()
        print "IPMI_Reprovision: wait for reprovision to complete"
        self.cv_SYSTEM.sys_wait_for_ipmi_pnor_reprovision_to_complete()
        print "IPMI_Reprovision: gathering the opal message logs"
        self.cv_HOST.host_gather_opal_msg_log()
        self.cv_HOST.host_get_OS_Level()
        self.cv_HOST.host_clone_skiboot_source(BMC_CONST.CLONE_SKIBOOT_DIR)
        # Compile the necessary tools xscom-utils and gard utility
        self.cv_HOST.host_compile_gard_utility(BMC_CONST.CLONE_SKIBOOT_DIR)
        l_con = self.cv_SYSTEM.sys_get_ipmi_console()
        self.cv_IPMI.ipmi_host_login(l_con)
        self.cv_IPMI.ipmi_host_set_unique_prompt(l_con)
        self.cv_IPMI.run_host_cmd_on_ipmi_console("uname -a")
        l_res = self.cv_SYSTEM.sys_list_gard_records(BMC_CONST.GARD_TOOL_DIR)
        print l_res
        if BMC_CONST.NO_GARD_RECORDS in l_res:
            print "GUARD Partition - IPMI Reprovision is done, cleared HW gard records"
        else:
            l_msg = "IPMI: Reprovision not happening, gard records are not erased"
            raise OpTestError(l_msg)
        print "IPMI_Reprovision: Performing a IPMI Power OFF Operation"
        # Perform a IPMI Power OFF Operation(Immediate Shutdown)
        self.cv_IPMI.ipmi_power_off()
        if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == BMC_CONST.FW_SUCCESS:
            print "IPMI_Reprovision: System is in standby/Soft-off state"
        else:
            l_msg = "IPMI_Reprovision: System failed to reach standby/Soft-off state"
            raise OpTestError(l_msg)

        print "IPMI_Reprovision: Performing a IPMI Power ON Operation"
        # Perform a IPMI Power ON Operation
        self.cv_IPMI.ipmi_power_on()
        self.cv_SYSTEM.sys_check_host_status()
        self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)

        print "IPMI_Reprovision: gathering the opal message logs"
        self.cv_HOST.host_gather_opal_msg_log()
        return BMC_CONST.FW_SUCCESS

# 需要导入模块: from common.OpTestIPMI import OpTestIPMI [as 别名]
# 或者: from common.OpTestIPMI.OpTestIPMI import run_host_cmd_on_ipmi_console [as 别名]

#.........这里部分代码省略.........
            self.cv_HOST.host_run_command("service kdump status")

    ##
    # @brief This function is mainly used to clear hardware gard entries.
    #        It will perform below steps
    #           1. Reboot the system(Power off/on)
    #           2. Clear any Hardware gard entries
    #           3. Again reboot the system, to make use of garded Hardware.
    #
    # @return BMC_CONST.FW_SUCCESS or raise OpTestError
    #
    def clearGardEntries(self):
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()
        # Power off and on the system.
        self.cv_IPMI.ipmi_power_off()
        self.cv_IPMI.ipmi_power_on()
        if int(self.cv_SYSTEM.sys_ipl_wait_for_working_state()):
            l_msg = "System failed to boot host OS"
            raise OpTestError(l_msg)
        time.sleep(BMC_CONST.HOST_BRINGUP_TIME)

        # Clearing gard entries after host comes up
        self.cv_HOST.host_get_OS_Level()
        # It will clone skiboot source repository
        l_dir = "/tmp/skiboot"
        self.cv_HOST.host_clone_skiboot_source(l_dir)
        # Compile the necessary tools xscom-utils and gard utility
        self.cv_HOST.host_compile_xscom_utilities(l_dir)
        self.cv_HOST.host_compile_gard_utility(l_dir)

        l_con = self.cv_SYSTEM.sys_get_ipmi_console()
        self.cv_IPMI.ipmi_host_login(l_con)
        self.cv_IPMI.ipmi_host_set_unique_prompt(l_con)
        self.cv_IPMI.run_host_cmd_on_ipmi_console("uname -a")
        l_dir = "/tmp/skiboot"
        self.cv_IPMI.run_host_cmd_on_ipmi_console("cd %s/external/gard/;" % l_dir)
        l_cmd = "./gard list; echo $?"
        self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)
        l_cmd = "./gard clear all; echo $?"
        l_res = self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)
        if int(l_res[-1]):
            l_msg = "Clearing gard entries through gard tool is failed"
            raise OpTestError(l_msg)
        l_cmd = "./gard list; echo $?"
        self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)

        # Rebooting the system again to make use of garded hardware
        self.cv_IPMI.ipmi_power_off()
        self.cv_IPMI.ipmi_power_on()
        if int(self.cv_SYSTEM.sys_ipl_wait_for_working_state()):
            l_msg = "System failed to boot host OS"
            raise OpTestError(l_msg)
        time.sleep(BMC_CONST.HOST_BRINGUP_TIME)
        self.cv_HOST.host_get_OS_Level()
        self.cv_SYSTEM.sys_ipmi_close_console(l_con)

    ##
    # @brief This function executes HMI test case based on the i_test value, Before test starts
    #        disabling kdump service to make sure system reboots, after injecting non-recoverable errors.
    #
    # @param i_test @type int: this is the type of test case want to execute
    #                          BMC_CONST.HMI_PROC_RECV_DONE: Processor recovery done
    #                          BMC_CONST.HMI_PROC_RECV_ERROR_MASKED: proc_recv_error_masked
    #                          BMC_CONST.HMI_MALFUNCTION_ALERT: malfunction_alert
    #                          BMC_CONST.HMI_HYPERVISOR_RESOURCE_ERROR: hypervisor resource error
    #

# 需要导入模块: from common.OpTestIPMI import OpTestIPMI [as 别名]
# 或者: from common.OpTestIPMI.OpTestIPMI import run_host_cmd_on_ipmi_console [as 别名]
class OpTestPrdDriver():
    ## Initialize this object
    #  @param i_bmcIP The IP address of the BMC
    #  @param i_bmcUser The userid to log into the BMC with
    #  @param i_bmcPasswd The password of the userid to log into the BMC with
    #  @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
    #  @param i_bmcPasswdIpmi The password of BMC IPMI userid
    #  @param i_ffdcDir Optional param to indicate where to write FFDC
    #
    # "Only required for inband tests" else Default = None
    # @param i_hostIP The IP address of the HOST
    # @param i_hostuser The userid to log into the HOST
    # @param i_hostPasswd The password of the userid to log into the HOST with
    #
    def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostip=None,
                 i_hostuser=None, i_hostPasswd=None):
        self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
        self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
                                  i_ffdcDir, i_hostip, i_hostuser, i_hostPasswd)
        self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd, i_bmcIP)
        self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
                 i_hostuser, i_hostPasswd)
        self.util = OpTestUtil()

    ##
    # @brief This function performs below steps
    #        1. Initially connecting to host and ipmi consoles for execution.
    #        2. check for IPOLL mask register value to see whether opal-prd is running or not
    #           if it is 0-->opal-prd is running-->continue
    #           else start opal-prd service again
    #        3. call test_prd_for_fir() function for each core FIR error and this function
    #           can be used for any number of errors, like it is a generic function
    #
    # @return BMC_CONST.FW_SUCCESS or raise OpTestError
    #
    def testPrdDriver(self):
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()
        self.test_init()
        l_con = self.cv_SYSTEM.sys_get_ipmi_console()
        self.cv_IPMI.ipmi_host_login(l_con)
        self.cv_IPMI.ipmi_host_set_unique_prompt(l_con)
        self.cv_IPMI.run_host_cmd_on_ipmi_console("cd %s/external/xscom-utils/;" % BMC_CONST.CLONE_SKIBOOT_DIR)

        # check for IPOLL mask register value to check opal-prd is running or not
        l_cmd = "./getscom -c 0x0 %s" % BMC_CONST.IPOLL_MASK_REGISTER
        l_res = self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)
        if l_res[-1] == BMC_CONST.IPOLL_MASK_REGISTER_CONTENT:
            print "Opal-prd is running"
        else:
            self.cv_IPMI.run_host_cmd_on_ipmi_console("service opal-prd start")
            l_res = self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)
            if l_res[-1] == BMC_CONST.IPOLL_MASK_REGISTER_CONTENT:
                print "Opal-prd is running"
            else:
                l_msg = "IPOLL MASK REGISTER is not getting cleared by opal-prd"
                raise OpTestError(l_msg)

        # test for PBA FIR with different core errors
        # 1.PBAFIR_OCI_APAR_ERR-->OCI Address Parity Error
        print "PRD: Test for PBAFIR_OCI_APAR_ERR-->OCI Address Parity Error"
        self.test_prd_for_fir(BMC_CONST.PBA_FAULT_ISOLATION_REGISTER,
                              BMC_CONST.PBA_FAULT_ISOLATION_MASK_REGISTER,
                              BMC_CONST.PBAFIR_OCI_APAR_ERR)
        # 2.PBAFIR_PB_CE_FW-->PB Read Data CE Error for Forwarded Request
        print "PRD: Test for PBAFIR_PB_CE_FW-->PB Read Data CE Error for Forwarded Request"
        self.test_prd_for_fir(BMC_CONST.PBA_FAULT_ISOLATION_REGISTER,
                              BMC_CONST.PBA_FAULT_ISOLATION_MASK_REGISTER,
                              BMC_CONST.PBAFIR_PB_CE_FW)
        # 3.PBAFIR_PB_RDDATATO_FW-->PB Read Data Timeout for Forwarded Request
        print "PRD: Test for PBAFIR_PB_RDDATATO_FW-->PB Read Data Timeout for Forwarded Request"
        self.test_prd_for_fir(BMC_CONST.PBA_FAULT_ISOLATION_REGISTER,
                              BMC_CONST.PBA_FAULT_ISOLATION_MASK_REGISTER,
                              BMC_CONST.PBAFIR_PB_RDDATATO_FW)
        # 4.PBAFIR_PB_RDADRERR_FW-->PB CRESP Addr Error Received for Forwarded Read Request
        print "PRD: Test for PBAFIR_PB_RDADRERR_FW-->PB CRESP Addr Error Received for Forwarded Read Request"
        self.test_prd_for_fir(BMC_CONST.PBA_FAULT_ISOLATION_REGISTER,
                              BMC_CONST.PBA_FAULT_ISOLATION_MASK_REGISTER,
                              BMC_CONST.PBAFIR_PB_RDADRERR_FW)
        return BMC_CONST.FW_SUCCESS

    ##
    # @brief This function injects some core FIR errors and verifies whether opal-prd clears the errors.
    #        and also this function injects errors on random chip.
    #
    # @param FIR @type str: Local Fault Isolation register
    # @param FIMR @type str: Local Fault Isolation mask register
    # @param ERROR @type int: Core FIR error, this error will be written to FIR.
    #
    # @return BMC_CONST.FW_SUCCESS or raise OpTestError
    #
    def test_prd_for_fir(self, FIR, FIMR, ERROR):
        chip_id = "0x" + self.random_chip
        print chip_id
        print "OPAL-PRD: Injecting error 0x%x on FIR: %s" % (ERROR, FIR)
        # Read Local Fault Isolation register
        l_cmd = "./getscom -c %s %s" % (chip_id, FIR)
        l_res = self.cv_IPMI.run_host_cmd_on_ipmi_console(l_cmd)

#.........这里部分代码省略.........

# 需要导入模块: from common.OpTestIPMI import OpTestIPMI [as 别名]
# 或者: from common.OpTestIPMI.OpTestIPMI import run_host_cmd_on_ipmi_console [as 别名]
class OpTestPCI:
    ##  Initialize this object
    #  @param i_bmcIP The IP address of the BMC
    #  @param i_bmcUser The userid to log into the BMC with
    #  @param i_bmcPasswd The password of the userid to log into the BMC with
    #  @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
    #  @param i_bmcPasswdIpmi The password of BMC IPMI userid
    #  @param i_ffdcDir Optional param to indicate where to write FFDC
    #
    # "Only required for inband tests" else Default = None
    # @param i_hostIP The IP address of the HOST
    # @param i_hostuser The userid to log into the HOST
    # @param i_hostPasswd The password of the userid to log into the HOST with
    #
    def __init__(
        self,
        i_bmcIP,
        i_bmcUser,
        i_bmcPasswd,
        i_bmcUserIpmi,
        i_bmcPasswdIpmi,
        i_ffdcDir=None,
        i_hostip=None,
        i_hostuser=None,
        i_hostPasswd=None,
        i_hostLspci=None,
    ):
        self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
        self.cv_IPMI = OpTestIPMI(
            i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip, i_hostuser, i_hostPasswd
        )
        self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd, i_bmcIP, i_ffdcDir)
        self.cv_SYSTEM = OpTestSystem(
            i_bmcIP,
            i_bmcUser,
            i_bmcPasswd,
            i_bmcUserIpmi,
            i_bmcPasswdIpmi,
            i_ffdcDir,
            i_hostip,
            i_hostuser,
            i_hostPasswd,
        )
        self.util = OpTestUtil()
        self.lspci_file = i_hostLspci

    ##
    # @brief  This function will get the PCI and USB susbsytem Info
    #         And also this test compares known good data of
    #         "lspci -mm -n" which is stored in testcases/data directory
    #         with the current lspci data.
    #         User need to specify the corresponding file name into
    #         machines xml like lspci.txt which contains "lspci -mm -n"
    #         command output in a working good state of system.
    #         tools used are lspci and lsusb
    #
    # @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
    #
    def test_host_pci_devices_info(self):
        if self.lspci_file == "empty.txt":
            print "Skipping the pci devices comparision as missing the lspci data file name in machines xml"
            return BMC_CONST.FW_SUCCESS
        filename = os.path.join(os.path.dirname(__file__).split("testcases")[0], self.lspci_file)
        if not os.path.isfile(filename):
            raise OpTestError("lspci file %s not found in top level directory" % filename)
        self.pci_good_data_file = filename
        self.test_skiroot_pci_devices()
        self.cv_IPMI.ipmi_set_boot_to_disk()
        self.cv_IPMI.ipmi_power_off()
        self.cv_IPMI.ipmi_power_on()
        self.cv_IPMI.ipl_wait_for_working_state()
        self.test_host_pci_devices()

    ##
    # @brief  This function will get the "lspci -mm -n" output from the petitboot
    #         and compares it with known good lspci data
    #
    # @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
    #
    def test_skiroot_pci_devices(self):
        cmd = "lspci -mm -n"
        self.console = self.cv_SYSTEM.sys_get_ipmi_console()
        self.cv_SYSTEM.sys_ipmi_boot_system_to_petitboot(self.console)
        self.cv_IPMI.ipmi_host_set_unique_prompt(self.console)
        self.cv_IPMI.run_host_cmd_on_ipmi_console("uname -a")
        self.cv_IPMI.run_host_cmd_on_ipmi_console("cat /etc/os-release")
        res = self.cv_IPMI.run_host_cmd_on_ipmi_console(cmd)
        self.cv_SYSTEM.sys_ipmi_close_console(self.console)
        self.pci_data_petitboot = "\n".join(res[1:])
        diff_process = subprocess.Popen(["diff", "-u", self.pci_good_data_file, "-"], stdin=subprocess.PIPE)
        diff_stdout, diff_stderr = diff_process.communicate(self.pci_data_petitboot + "\n")
        r = diff_process.wait()
        if r == 0:
            print "All the pci devices are detected at petitboot"
        else:
            print diff_stdout
            raise OpTestError("There is a mismatch b/w known good output and tested petitboot lspci output")

    ##
    # @brief  This function will get the "lspci -mm -n" output from the host OS
#.........这里部分代码省略.........

# 需要导入模块: from common.OpTestIPMI import OpTestIPMI [as 别名]
# 或者: from common.OpTestIPMI.OpTestIPMI import run_host_cmd_on_ipmi_console [as 别名]
class OpTestMCColdResetEffects():
    ##  Initialize this object
    #  @param i_bmcIP The IP address of the BMC
    #  @param i_bmcUser The userid to log into the BMC with
    #  @param i_bmcPasswd The password of the userid to log into the BMC with
    #  @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
    #  @param i_bmcPasswdIpmi The password of BMC IPMI userid
    #  @param i_ffdcDir Optional param to indicate where to write FFDC
    #
    # "Only required for inband tests" else Default = None
    # @param i_hostIP The IP address of the HOST
    # @param i_hostuser The userid to log into the HOST
    # @param i_hostPasswd The password of the userid to log into the HOST with
    #
    def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostip=None,
                 i_hostuser=None, i_hostPasswd=None):
        self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
        self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
                                  i_ffdcDir, i_hostip, i_hostuser, i_hostPasswd)
        self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd, i_bmcIP, i_ffdcDir)
        self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
                                      i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
                                      i_hostuser, i_hostPasswd)
        self.util = OpTestUtil()

        self.opTestSensors = OpTestSensors(i_bmcIP, i_bmcUser, i_bmcPasswd,
                                           i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
                                           i_hostuser, i_hostPasswd)

    ##
    # @brief  This function will test BMC Cold reset vs Host FW status
    #         1. When system is in runtime issue BMC Cold reset.
    #         2. Check Host FW services and drivers.
    #         3. Run sensors command
    #         4. Get list of chips
    #         5. This is expected to fail.
    #           https://github.com/open-power/op-build/issues/482
    #         6. Reboot the system at the end of test.
    #
    # @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
    #
    def test_bmc_cold_reset_effects(self):
        print "Test BMC Cold reset effects versus Host Firmware Status"
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()
        print "Issue BMC Cold reset"
        result = True
        try:
            self.cv_SYSTEM.sys_cold_reset_bmc()
            l_dir = BMC_CONST.SKIBOOT_WORKING_DIR
            self.cv_HOST.host_clone_skiboot_source(l_dir)
            self.cv_HOST.host_compile_xscom_utilities(l_dir)
            l_con = self.cv_SYSTEM.sys_get_ipmi_console()
            self.cv_IPMI.ipmi_host_login(l_con)
            self.cv_IPMI.ipmi_host_set_unique_prompt(l_con)
            self.cv_IPMI.run_host_cmd_on_ipmi_console("uname -a")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("cd %s/external/xscom-utils/; ./getscom -l" % l_dir)
            self.opTestSensors.test_hwmon_driver()
            self.cv_SYSTEM.sys_ipmi_close_console(l_con)
        except:
            result = False
            pass
        print "Gathering the OPAL msg logs"
        self.cv_HOST.host_gather_opal_msg_log()
        self.cv_IPMI.ipmi_power_off()
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()
        if result is False:
            raise OpTestError("MC Cold reset vs Host FW Test failed")

# 需要导入模块: from common.OpTestIPMI import OpTestIPMI [as 别名]
# 或者: from common.OpTestIPMI.OpTestIPMI import run_host_cmd_on_ipmi_console [as 别名]
class OpTestFastReboot():
    ##  Initialize this object
    #  @param i_bmcIP The IP address of the BMC
    #  @param i_bmcUser The userid to log into the BMC with
    #  @param i_bmcPasswd The password of the userid to log into the BMC with
    #  @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
    #  @param i_bmcPasswdIpmi The password of BMC IPMI userid
    #  @param i_ffdcDir Optional param to indicate where to write FFDC
    #
    # "Only required for inband tests" else Default = None
    # @param i_hostIP The IP address of the HOST
    # @param i_hostuser The userid to log into the HOST
    # @param i_hostPasswd The password of the userid to log into the HOST with
    #
    def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostip=None,
                 i_hostuser=None, i_hostPasswd=None):
        self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
        self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
                                  i_ffdcDir, i_hostip, i_hostuser, i_hostPasswd)
        self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd, i_bmcIP)
        self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
                         i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
                         i_hostuser, i_hostPasswd)
        self.util = OpTestUtil()

    ##
    # @brief  This function tests fast reset of power systems.
    #         It will check booting sequence when reboot command
    #         getting executed in both petitboot and host OS
    #
    # @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
    #
    def test_opal_fast_reboot(self):
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()
        self.cv_HOST.host_run_command(BMC_CONST.NVRAM_SET_FAST_RESET_MODE)
        res = self.cv_HOST.host_run_command(BMC_CONST.NVRAM_PRINT_FAST_RESET_VALUE)
        if "feeling-lucky" in res:
            print "Setting the fast-reset mode successful"
        else:
            raise OpTestError("Failed to set the fast-reset mode")
        self.con = self.cv_SYSTEM.sys_get_ipmi_console()
        self.cv_IPMI.ipmi_host_login(self.con)
        self.cv_IPMI.ipmi_host_set_unique_prompt(self.con)
        self.cv_IPMI.run_host_cmd_on_ipmi_console("uname -a")
        self.cv_IPMI.ipmi_set_boot_to_petitboot()
        self.con.sendline("reboot")
        self.con.expect(" RESET: Initiating fast reboot", timeout=60)
        # Exiting to petitboot shell
        self.con.expect('Petitboot', timeout=BMC_CONST.PETITBOOT_TIMEOUT)
        self.con.expect('x=exit', timeout=10)
        # Exiting to petitboot
        self.con.sendcontrol('l')
        self.con.send('\x1b[B')
        self.con.send('\x1b[B')
        self.con.send('\r')
        self.con.expect('Exiting petitboot')
        self.con.send('\r')
        self.con.send('\x08')
        self.cv_IPMI.ipmi_host_set_unique_prompt(self.con)
        self.cv_IPMI.run_host_cmd_on_ipmi_console("uname -a")
        self.con.sendline("reboot")
        self.con.expect(" RESET: Initiating fast reboot", timeout=60)
        # Exiting to petitboot shell
        self.con.expect('Petitboot', timeout=BMC_CONST.PETITBOOT_TIMEOUT)
        self.con.expect('x=exit', timeout=10)
        print "fast-reset boots the system to runtime"
        self.cv_IPMI.ipmi_set_boot_to_disk()
        return BMC_CONST.FW_SUCCESS

# 需要导入模块: from common.OpTestIPMI import OpTestIPMI [as 别名]
# 或者: from common.OpTestIPMI.OpTestIPMI import run_host_cmd_on_ipmi_console [as 别名]
class OpTestNVRAM():
    ##  Initialize this object
    #  @param i_bmcIP The IP address of the BMC
    #  @param i_bmcUser The userid to log into the BMC with
    #  @param i_bmcPasswd The password of the userid to log into the BMC with
    #  @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
    #  @param i_bmcPasswdIpmi The password of BMC IPMI userid
    #  @param i_ffdcDir Optional param to indicate where to write FFDC
    #
    # "Only required for inband tests" else Default = None
    # @param i_hostIP The IP address of the HOST
    # @param i_hostuser The userid to log into the HOST
    # @param i_hostPasswd The password of the userid to log into the HOST with
    #
    def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostip=None,
                 i_hostuser=None, i_hostPasswd=None):
        self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
        self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
                                  i_ffdcDir, i_hostip, i_hostuser, i_hostPasswd)
        self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd, i_bmcIP)
        self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
                         i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
                         i_hostuser, i_hostPasswd)
        self.util = OpTestUtil()

    ##
    # @brief  This function tests nvram partition access, print/update
    #         the config data and dumping the partition's data. All
    #         these operations are done on supported partitions in both
    #         host OS and Petitboot.
    #
    # @return BMC_CONST.FW_SUCCESS or BMC_CONST.FW_FAILED
    #
    def test_nvram_configuration(self):
        # Execute these tests in host OS
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()
        self.cv_HOST.host_run_command("uname -a")
        self.cv_HOST.host_run_command("cat /etc/os-release")
        self.cv_HOST.host_run_command("nvram -v")
        self.cv_HOST.host_run_command("nvram --print-config -p ibm,skiboot")
        self.cv_HOST.host_run_command("nvram --print-config -p common")
        self.cv_HOST.host_run_command("nvram --print-config -p lnx,oops-log")
        self.cv_HOST.host_run_command("nvram --print-config -p wwwwwwwwwwww")
        self.cv_HOST.host_run_command("nvram --print-vpd")
        self.cv_HOST.host_run_command("nvram --print-all-vpd")
        self.cv_HOST.host_run_command("nvram --print-err-log")
        self.cv_HOST.host_run_command("nvram --print-event-scan")
        self.cv_HOST.host_run_command("nvram --partitions")
        self.cv_HOST.host_run_command("nvram --dump common")
        self.cv_HOST.host_run_command("nvram --dump ibm,skiboot")
        self.cv_HOST.host_run_command("nvram --dump lnx,oops-log")
        self.cv_HOST.host_run_command("nvram --dump wwwwwwwwwwww")
        self.cv_HOST.host_run_command("nvram --ascii common")
        self.cv_HOST.host_run_command("nvram --ascii ibm,skiboot")
        self.cv_HOST.host_run_command("nvram --ascii lnx,oops-log")
        self.cv_HOST.host_run_command("nvram --ascii wwwwwwwwwwww")
        try:
            self.test_nvram_update_part_config_in_host("common")
            self.test_nvram_update_part_config_in_host("ibm,skiboot")
            self.test_nvram_update_part_config_in_host("lnx,oops-log")
            self.test_nvram_update_part_config_in_host("wwwwwwwwwwww")
        except OpTestError:
            print "There is a failure in updating one of NVRAM partitions"

        # Execute these tests in petitboot
        self.console = self.cv_SYSTEM.sys_get_ipmi_console()
        try:
            self.cv_SYSTEM.sys_ipmi_boot_system_to_petitboot(self.console)
            self.cv_IPMI.ipmi_host_set_unique_prompt(self.console)
            self.cv_IPMI.run_host_cmd_on_ipmi_console("uname -a")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("cat /etc/os-release")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram -v")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --print-config -p ibm,skiboot")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --print-config -p common")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --print-config -p lnx,oops-log")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --print-config -p wwwwwwwwwwww")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --print-vpd")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --print-all-vpd")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --print-err-log")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --print-event-scan")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --partitions")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --dump common")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --dump ibm,skiboot")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --dump lnx,oops-log")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --dump wwwwwwwwwwww")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --ascii common")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --ascii ibm,skiboot")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --ascii lnx,oops-log")
            self.cv_IPMI.run_host_cmd_on_ipmi_console("nvram --ascii wwwwwwwwwwww")
            try:
                self.test_nvram_update_part_config_in_petitboot("common")
                self.test_nvram_update_part_config_in_petitboot("ibm,skiboot")
                self.test_nvram_update_part_config_in_petitboot("lnx,oops-log")
                self.test_nvram_update_part_config_in_petitboot("wwwwwwwwwwww")
            except OpTestError:
                print "There is a failure in updating one of NVRAM partitions"
        except:
            self.cv_IPMI.ipmi_set_boot_to_disk()
        self.cv_IPMI.ipmi_set_boot_to_disk()
#.........这里部分代码省略.........

# 需要导入模块: from common.OpTestIPMI import OpTestIPMI [as 别名]
# 或者: from common.OpTestIPMI.OpTestIPMI import run_host_cmd_on_ipmi_console [as 别名]
class OpTestIPMILockMode():
    ##  Initialize this object
    #  @param i_bmcIP The IP address of the BMC
    #  @param i_bmcUser The userid to log into the BMC with
    #  @param i_bmcPasswd The password of the userid to log into the BMC with
    #  @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
    #  @param i_bmcPasswdIpmi The password of BMC IPMI userid
    #  @param i_ffdcDir Optional param to indicate where to write FFDC
    #
    # "Only required for inband tests" else Default = None
    # @param i_hostIP The IP address of the HOST
    # @param i_hostuser The userid to log into the HOST
    # @param i_hostPasswd The password of the userid to log into the HOST with
    #
    def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostip=None,
                 i_hostuser=None, i_hostPasswd=None):
        self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
        self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
                                  i_ffdcDir, i_hostip, i_hostuser, i_hostPasswd)
        self.cv_HOST = OpTestHost(i_hostip, i_hostuser, i_hostPasswd, i_bmcIP)
        self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
                 i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostip,
                 i_hostuser, i_hostPasswd)
        self.util = OpTestUtil()

    ##
    # @brief This function will cover following test steps
    #        1. It will get the OS level installed on power platform
    #        2. It will check for kernel version installed on the Open Power Machine
    #        3. It will check for ipmitool command existence and ipmitool package
    #        4. Load the necessary ipmi modules based on config values
    #        5. Issue a ipmi lock command through out-of-band authenticated interface
    #        6. Now BMC IPMI is in locked mode, at this point only white listed
    #           in-band ipmi commands sholud work(No other in-band ipmi command should work)
    #        7. Execute and test the functionality of whitelisted in-band ipmi
    #           commands in locked mode
    #        8. At the end of test issue a ipmi unlock command to revert the availablity of all
    #           in-band ipmi commands in unlocked mode.
    #
    # @return BMC_CONST.FW_SUCCESS or raise OpTestError
    #
    def test_ipmi_lock_mode(self):
        self.cv_SYSTEM.sys_bmc_power_on_validate_host()

        # Get OS level
        l_oslevel = self.cv_HOST.host_get_OS_Level()

        # Get kernel version
        l_kernel = self.cv_HOST.host_get_kernel_version()

        # Checking for ipmitool command and lm_sensors package
        self.cv_HOST.host_check_command("ipmitool")

        l_pkg = self.cv_HOST.host_check_pkg_for_utility(l_oslevel, "ipmitool")
        print "Installed package: %s" % l_pkg

        # loading below ipmi modules based on config option
        # ipmi_devintf, ipmi_powernv and ipmi_masghandler
        self.cv_HOST.host_load_module_based_on_config(l_kernel, BMC_CONST.CONFIG_IPMI_DEVICE_INTERFACE,
                                                      BMC_CONST.IPMI_DEV_INTF)
        self.cv_HOST.host_load_module_based_on_config(l_kernel, BMC_CONST.CONFIG_IPMI_POWERNV,
                                                      BMC_CONST.IPMI_POWERNV)
        self.cv_HOST.host_load_module_based_on_config(l_kernel, BMC_CONST.CONFIG_IPMI_HANDLER,
                                                      BMC_CONST.IPMI_MSG_HANDLER)

        # Issue a ipmi lock command through authenticated interface
        print "Issuing ipmi lock command through authenticated interface"
        l_res = self.cv_IPMI.ipmitool_execute_command(BMC_CONST.IPMI_LOCK_CMD)
        l_res = l_res.splitlines()
        if int(l_res[-1]):
            l_msg = "IPMI:Lock command failed, There may be two reasons here.\n\
                a. check the corresponding parches available in AMI driver code,\n\
                b. if patches available then command is failing"
            print l_msg
            raise OpTestError(l_msg)
        print "IPMI:Lock command executed successfully"

        try:
            self.run_inband_ipmi_whitelisted_cmds()
        except:
            l_msg = "One of white listed in-band ipmi command execution failed"
            print sys.exc_info()
        finally:
            # Issue a ipmi unlock command at the end of test.
            print "Issuing ipmi unlock command through authenticated interface"
            self.cv_IPMI.ipmitool_execute_command(BMC_CONST.IPMI_UNLOCK_CMD)

    ##
    # @brief This function will execute whitelisted in-band ipmi commands
    #        and test the functionality in locked mode.
    #
    # @return BMC_CONST.FW_SUCCESS or raise OpTestError
    #
    def run_inband_ipmi_whitelisted_cmds(self):
        l_con = self.cv_SYSTEM.sys_get_ipmi_console()
        self.cv_IPMI.ipmi_host_login(l_con)
        self.cv_IPMI.ipmi_host_set_unique_prompt(l_con)
        self.cv_IPMI.run_host_cmd_on_ipmi_console("uname -a")

#.........这里部分代码省略.........