Python AIPSTask.bpver方法代码示例

# 需要导入模块: from AIPSTask import AIPSTask [as 别名]
# 或者: from AIPSTask.AIPSTask import bpver [as 别名]
def runvplot(indata, sources, stokes, timer, anten, basel, bif, eif, bchan, echan, docalib, gainuse, flagver, doband, bpver, aparm, bparm, refant, dotv, nplots):
	vplot = AIPSTask('VPLOT')
	vplot.indata = indata
	vplot.sources[1:] = sources
	vplot.stokes = stokes
	vplot.timerang[1:] = timer
	vplot.antennas[1:] = anten
	vplot.baseline[1:] = basel
	vplot.bchan = bchan
	vplot.echan = echan
	vplot.avgchan = 1
	vplot.bif = bif
	vplot.eif = eif
	vplot.docalib = docalib
	vplot.gainuse = gainuse
	vplot.flagver = flagver
	vplot.doband = doband
	vplot.bpver = bpver
	vplot.aparm[1:] = aparm
	vplot.bparm[1:] = bparm
	vplot.crowded = 0
	vplot.refant = refant
	vplot.dotv = dotv
	vplot.xinc = 1
	vplot.nplots = nplots
	vplot.go()

# 需要导入模块: from AIPSTask import AIPSTask [as 别名]
# 或者: from AIPSTask.AIPSTask import bpver [as 别名]
def runselfcalib(indata, in2data, calsour, timer, uvrang, docalib, gainuse, flagver, doband, bpver, cmethod, refant, solint, aparm, doflag, soltype, solmode, minamper, minphser, cparm, snver, antwt, weightit):
	# CALIB procedure for self-calibration
	calib = AIPSTask('CALIB')
	calib.indata = indata
	calib.in2data = in2data
	calib.calsour[1:] = calsour
	calib.timer[1:] = timer[1:]
	calib.uvrange[1:] = uvrang[1:]
	calib.docalib = docalib
	calib.gainuse = gainuse
	calib.flagver = flagver
	calib.doband = doband
	calib.bpver = bpver
	calib.cmethod = cmethod
	calib.refant = refant
	calib.solint = solint
#	calib.aparm[1:] = aparm[1:]
	if(solmode == 'P'):
		calib.aparm[1] = 3
	else:
		calib.aparm[1] = 4
	calib.aparm[6] = 3
	calib.aparm[7] = 5
	calib.cparm[1] = 10
	calib.doflag = doflag
	calib.soltype = soltype
	calib.solmode = solmode
	calib.minamper = minamper
	calib.minphser = minphser
	calib.cparm[1:] = cparm[1:]
	calib.snver = snver
	calib.antwt[1:] = antwt[1:]
	calib.weightit = weightit
	calib.go()

# 需要导入模块: from AIPSTask import AIPSTask [as 别名]
# 或者: from AIPSTask.AIPSTask import bpver [as 别名]
def runuvplt(indata, sources, stokes, timer, anten, basel, bif, eif, docalib, gainuse, flagver, doband, bpver, aparm, bparm, doweight, refant, dotv):
	uvplt = AIPSTask('UVPLT')
	uvplt.indata = indata
	uvplt.sources = sources
	uvplt.stokes = stokes
	uvplt.timerang = timer
	uvplt.antennas[1:] = anten
	uvplt.baseline[1:] = basel
	uvplt.bif = bif
	uvplt.eif = eif
	uvplt.docalib = docalib
	uvplt.gainuse = gainuse
	uvplt.flagver = flagver
	uvplt.doband = doband
	uvplt.bpver = bpver
	uvplt.aparm[1:] = aparm[1:]
	uvplt.bparm[1:] = bparm[1:]
	uvplt.doweight = doweight
	uvplt.refant = refant
	uvplt.dotv = dotv
	uvplt.go()

# 需要导入模块: from AIPSTask import AIPSTask [as 别名]
# 或者: from AIPSTask.AIPSTask import bpver [as 别名]
def runfring(indata, calsour, timer, docalib, gainuse, flagver, doband, bpver, refant, refantlist, solint, aparm, dparm, snver, snr, bchan, echan):
	print 'Running FRING on ', format(calsour)
	fring = AIPSTask('FRING')
	fring.indata = indata
	fring.calsour[1:] = calsour
	fring.timer[1:] = timer
	fring.docalib = docalib
	fring.gainuse = gainuse
	fring.flagver = flagver
	fring.doband = doband
	fring.bpver = bpver
	fring.refant = refant
	fring.search[1:] = refantlist
	fring.solint = solint
	fring.cmethod = 'DFT'
	fring.aparm[1:] = aparm
	fring.aparm[7] = snr
	fring.dparm[1:] = dparm
	fring.snver = snver
	fring.bchan = bchan
	fring.echan = echan
	fring.go()

# 需要导入模块: from AIPSTask import AIPSTask [as 别名]
# 或者: from AIPSTask.AIPSTask import bpver [as 别名]
def runimagr(indata, sources, docalib, gainuse, flagver, doband, bpver, bchan, echan, nchav, chinc, cellsiz, imsiz, niter, dotv, outdisk):
	imagr = AIPSTask('IMAGR')
	imagr.indata = indata
	imagr.sources[1:] = sources
	source = str(sources[0])
	if len(source)>12 :
		source = source[0:12]
	imagr.outname = source
	imagr.outdisk = outdisk
	imagr.docalib = docalib
	imagr.gainuse = gainuse
	imagr.flagver = flagver
	imagr.doband = doband
	imagr.bpver = bpver
	imagr.bchan = bchan
	imagr.echan = echan
	imagr.nchav = nchav
	imagr.chinc = chinc
	imagr.cellsize[1:] = cellsiz
	imagr.imsize[1:] = imsiz
	imagr.niter = niter
	imagr.dotv = dotv
	imagr.inp()
	imagr.go()

# 需要导入模块: from AIPSTask import AIPSTask [as 别名]
# 或者: from AIPSTask.AIPSTask import bpver [as 别名]
def runpossm(indata, sources, timer, anten, basel, aparm, bparm, bif, eif, docalib, gainuse, flagver, stokes, doband, bpver, codetype, solint, nplots, dotv, freqid):
	possm = AIPSTask('POSSM')
	possm.indata = indata
	possm.sources[1:] = sources
	possm.timer[1:] = timer
	possm.aparm[1:] = aparm[1:]
	possm.aparm[9] = 1
	possm.bparm[1:] = bparm[1:]
	possm.antennas[1:] = anten
	possm.baseline[1:] = basel
	possm.bif =  bif
	possm.eif = eif
	possm.docalib = docalib
	possm.gainuse = gainuse
	possm.flagver = flagver
	possm.stokes = stokes
	possm.doband = doband
	possm.bpver = bpver
	possm.codetype = codetype
	possm.solint = solint
	possm.nplots = nplots
	possm.dotv = dotv
	possm.freqid = 1
	possm.go()

# 需要导入模块: from AIPSTask import AIPSTask [as 别名]
# 或者: from AIPSTask.AIPSTask import bpver [as 别名]

#.........这里部分代码省略.........
        
        #applies new SN table to CL
        print("Running clcal.")
        clcal = AIPSTask('clcal') 
        clcal.indata = uvdata
        clcal.calsour[1] = self.args["cal"]
        clcal.timerang = self.args["time"]
        clcal.snver = snVers
        clcal.inver = snVers
        clcal.gainver = clInit #apply to original cl
        clcal.timer = self.args["time"]
        clcal.interpol = "ambg"
        clcal.opcode = "calp"
        clcal.refant = self.args["refTelly"]
        clcal.go()

        clVers = clVers + 1
        print("clcal made cl table {0}".format(clVers))
        """
        print("Running Fring.")
        fring = AIPSTask('fring') #finds fringes
        fring.indata = uvdata
        fring.docalib = 1
        fring.gainuse = clVers
        if self.args["excludeTelly"]:
            fring.antennas[1:] = self.args["excludedTellys"]
        fring.calsour[1] = self.args["cal"]
        fring.bchan = self.args["bchan"]
        fring.echan = self.args["echan"]
        fring.timer = self.args["time"]
        fring.refant = self.args["refTelly"]
        if self.args["doBP"]:
            fring.doband = 1
            fring.bpver = 1
        fring.go()
        
        snVers = snVers + 1
        SN = 0
        for i in uvdata.tables:
            if i[1] == 'AIPS SN' and i[0]>SN:
                SN = i[0]
        if not SN == snVers:
            sys.exit("SN table number missmatch")
        print("Fring created SN table {0}".\
              format(snVers))

        
        #applies new SN table to CL
        print("Running clcal.")
        clcal = AIPSTask('clcal') 
        clcal.indata = uvdata
        clcal.calsour[1] = self.args["cal"]
        clcal.timerang = self.args["time"]
        if self.args["excludeTelly"]:
            clcal.antennas[1:] = self.args["excludedTellys"]
        clcal.snver = snVers
        clcal.inver = snVers
        clcal.gainver = clInit #apply to original cl
        clcal.timer = self.args["time"]
        clcal.interpol = "ambg"
        clcal.opcode = "calp"
        clcal.refant = self.args["refTelly"]
        clcal.go()
        """
        clcal.snver = snVers
        clcal.inver = snVers

# 需要导入模块: from AIPSTask import AIPSTask [as 别名]
# 或者: from AIPSTask.AIPSTask import bpver [as 别名]
    def __init__(self, clVers, **args):
        self.clVers = clVers
        self.args = args
        self.clVers = 3
        AIPS.userno=self.args["user"]
        uvdata = AIPSUVData(self.args["name"], 'UVDATA', 1, self.args["inseq"])
        t = [] #files t with [day, hour, min, sec, day, hour, min, sec]
        with open(self.args["timeList"], 'r') as f:
            for l in f.readlines():
                t.append(map(str,l.split()[1:9]))
        
        
        for j in t:
            realtime = ''.join([j[i] for i in range(len(j))])[0:7]
            imgname = realtime[0:5]
            #need to shorten the names for AIPS
            imagr = AIPSTask('IMAGR')
            imagr.indata = uvdata
            imagr.sources[1] = self.args["source"]
            imagr.docalib = 1
            imagr.gainuse = self.clVers
            imagr.bchan = self.args["SCbchan"]
            imagr.echan = self.args["SCechan"]
            imagr.nchav = (self.args["SCechan"] - self.args["SCbchan"] + 1)
            #averages over all channels
	    if self.args["doBP"]:
	      imagr.doband = 1	
	      imagr.bpver = 1
            if self.args["excludeTelly"]:
                imagr.antennas[1:] = self.args["excludedTellys"]
            imagr.outname = imgname
            imagr.outseq = 1
            imagr.cellsize = AIPSList([0.0001,0.0001])
            #imagr.imsize = AIPSList([1024,1024])
            imagr.imsize = AIPSList([256,256])
            imagr.nboxes = 1
            imagr.clbox[1] = self.args["fitBox"]
            imagr.niter = 1000
            imagr.timerang[1:] = [int(j[i]) for i in range(len(j))]#AIPSList(j)
            good = True
            
            try:
                imagr.go()
            except RuntimeError as e:
                print("\nSomething went wrong!\n  => {0}".format(e))
                with open(os.getcwd() + '/images_{0}/badtimes.txt'.format(self.args["date"]), 'a') as out:
                    out.write("{0}\n".format(imgname))
                good = False
            if good:
                imageClean = AIPSImage(imgname, 'ICL001',1,1)
                imageDirty = AIPSImage(imgname, 'IBM001',1,1)
                imageClean.clrstat() #makes sure AIPS does not trip
                imageDirty.clrstat()

                jmfit = AIPSTask('JMFIT')
                jmfit.indata = imageClean
                jmfit.blc[1] = .80*self.args["fitBox"][1]#fraction to increase box size
                jmfit.blc[2] = .80*self.args["fitBox"][2]
                jmfit.trc[1] = 1.20*self.args["fitBox"][3]
                jmfit.trc[2] = 1.20*self.args["fitBox"][4]
                jmfit.niter = 1000
                jmfit.doprint = 1 #CHANGED TO doprint!  
                address = os.getcwd() + '/images_{0}/'.format(self.args["date"]) + realtime
                jmfit.fitout = address + '.crd'
                jmfit.go()

                RA = [None]*4 #holds locations
                DEC = [None]*4
                with open(address + '.crd', 'r') as f:
                    for l in f.readlines():
                        temp = l.split()
                        #for j in range(len(temp)):
                        if len(temp)>0:
                            if temp[0] == 'RA':
                                RA[0] = int(temp[1])
                                RA[1] = int(temp[2])
                                RA[2] = float(temp[3])
                                RA[3] = float(temp[5])
                            elif temp[0] =='DEC':
                                DEC[0] = int(temp[1])
                                DEC[1] = int(temp[2])
                                DEC[2] = float(temp[3])
                                DEC[3] = float(temp[5])
                                

                with open(os.getcwd() + '/images_{0}/locations.txt'.format(self.args["date"]), 'a') as out:
                    out.write("{0}\t{1}\t{2}\t{3:^10}\t{4:^6}\t{5}\t{6}\t{7:^7}\t{8}\n".
                              format(realtime, RA[0], RA[1], RA[2], RA[3], \
                                     DEC[0], DEC[1], DEC[2], DEC[3]))
                #makes contour plot
                kntr = AIPSTask('KNTR')
                kntr.indata = imageClean
                kntr.levs = AIPSList([2,3,4,5,7,10,13,17])
                kntr.dogrey = -1
                kntr.dotv = -1 
                kntr.dovect = -1 
                #kntr.blc[1] .80*self.args["fitBox"][1]
                #kntr.blc[2] .80*self.args["fitBox"][2]
                #kntr.trc[1] 1.20*self.args["fitBox"][3]
                #kntr.trc[2] 1.20*self.args["fitBox"][4]
#.........这里部分代码省略.........