当前位置: 首页>>代码示例>>Golang>>正文


Golang Conn.Warn方法代码示例

本文整理汇总了Golang中ngrok/conn.Conn.Warn方法的典型用法代码示例。如果您正苦于以下问题:Golang Conn.Warn方法的具体用法?Golang Conn.Warn怎么用?Golang Conn.Warn使用的例子?那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在ngrok/conn.Conn的用法示例。


在下文中一共展示了Conn.Warn方法的9个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的Golang代码示例。

示例1: HandlePublicConnection

func (t *Tunnel) HandlePublicConnection(publicConn conn.Conn) {
	defer publicConn.Close()
	defer func() {
		if r := recover(); r != nil {
			publicConn.Warn("HandlePublicConnection failed with error %v", r)
		}
	}()

	startTime := time.Now()
	metrics.OpenConnection(t, publicConn)

	var proxyConn conn.Conn
	var err error
	for i := 0; i < (2 * proxyMaxPoolSize); i++ {
		// get a proxy connection
		if proxyConn, err = t.ctl.GetProxy(); err != nil {
			t.Warn("Failed to get proxy connection: %v", err)
			return
		}
		defer proxyConn.Close()
		t.Info("Got proxy connection %s", proxyConn.Id())
		proxyConn.AddLogPrefix(t.Id())

		// tell the client we're going to start using this proxy connection
		startPxyMsg := &msg.StartProxy{
			Url:        t.url,
			ClientAddr: publicConn.RemoteAddr().String(),
		}

		if err = msg.WriteMsg(proxyConn, startPxyMsg); err != nil {
			proxyConn.Warn("Failed to write StartProxyMessage: %v, attempt %d", err, i)
			proxyConn.Close()
		} else {
			// success
			break
		}
	}

	if err != nil {
		// give up
		publicConn.Error("Too many failures starting proxy connection")
		return
	}

	// To reduce latency handling tunnel connections, we employ the following curde heuristic:
	// Whenever we take a proxy connection from the pool, replace it with a new one
	util.PanicToError(func() { t.ctl.out <- &msg.ReqProxy{} })

	// no timeouts while connections are joined
	proxyConn.SetDeadline(time.Time{})

	// join the public and proxy connections
	bytesIn, bytesOut := conn.Join(publicConn, proxyConn)
	metrics.CloseConnection(t, publicConn, startTime, bytesIn, bytesOut)

	//log.Info("Proxy authId=%s bytesIn=%d, bytesOut=%d\n", t.ctl.userInfo.Uc.UserId, bytesIn, bytesOut)
	atomic.AddInt32(&t.ctl.userInfo.TransPerDay, int32(bytesIn+bytesOut))
	atomic.AddInt32(&t.ctl.userInfo.TransAll, int32(bytesIn+bytesOut))
}
开发者ID:koolshare,项目名称:ngrok-1.7,代码行数:59,代码来源:tunnel.go

示例2: httpHandler

// Handles a new http connection from the public internet
func httpHandler(c conn.Conn, proto string) {
	defer c.Close()
	defer func() {
		// recover from failures
		if r := recover(); r != nil {
			c.Warn("httpHandler failed with error %v", r)
		}
	}()

	// Make sure we detect dead connections while we decide how to multiplex
	c.SetDeadline(time.Now().Add(connReadTimeout))

	// multiplex by extracting the Host header, the vhost library
	vhostConn, err := vhost.HTTP(c)
	if err != nil {
		c.Warn("Failed to read valid %s request: %v", proto, err)
		c.Write([]byte(BadRequest))
		return
	}

	// read out the Host header and auth from the request
	host := strings.ToLower(vhostConn.Host())
	auth := vhostConn.Request.Header.Get("Authorization")

	// done reading mux data, free up the request memory
	vhostConn.Free()

	// We need to read from the vhost conn now since it mucked around reading the stream
	c = conn.Wrap(vhostConn, "pub")

	// multiplex to find the right backend host
	c.Debug("Found hostname %s in request", host)
	tunnel := tunnelRegistry.Get(fmt.Sprintf("%s://%s", proto, host))
	if tunnel == nil {
		tunnel = tunnelRegistry.Get(fmt.Sprintf("%s://%s%s", proto, host, opts.httpAddr))
	}
	if tunnel == nil {
		c.Info("No tunnel found for hostname %s", host)
		c.Write([]byte(fmt.Sprintf(NotFound, len(host)+18, host)))
		return
	}

	// If the client specified http auth and it doesn't match this request's auth
	// then fail the request with 401 Not Authorized and request the client reissue the
	// request with basic authdeny the request
	if tunnel.req.HttpAuth != "" && auth != tunnel.req.HttpAuth {
		c.Info("Authentication failed: %s", auth)
		c.Write([]byte(NotAuthorized))
		return
	}

	// dead connections will now be handled by tunnel heartbeating and the client
	c.SetDeadline(time.Time{})

	// let the tunnel handle the connection now
	tunnel.HandlePublicConnection(c)
}
开发者ID:zhuer0632,项目名称:ngrok,代码行数:58,代码来源:http.go

示例3: HandlePublicConnection

func (t *Tunnel) HandlePublicConnection(publicConn conn.Conn) {
	defer publicConn.Close()
	defer func() {
		if r := recover(); r != nil {
			publicConn.Warn("HandlePublicConnection failed with error %v", r)
		}
	}()

	startTime := time.Now()
	metrics.OpenConnection(t, publicConn)

	var proxyConn conn.Conn
	var attempts int
	var err error
	for {
		// get a proxy connection
		if proxyConn, err = t.ctl.GetProxy(); err != nil {
			t.Warn("Failed to get proxy connection: %v", err)
			return
		}
		defer proxyConn.Close()
		t.Info("Got proxy connection %s", proxyConn.Id())
		proxyConn.AddLogPrefix(t.Id())

		// tell the client we're going to start using this proxy connection
		startPxyMsg := &msg.StartProxy{
			Url:        t.url,
			ClientAddr: publicConn.RemoteAddr().String(),
		}
		if err = msg.WriteMsg(proxyConn, startPxyMsg); err != nil {
			attempts += 1
			proxyConn.Warn("Failed to write StartProxyMessage: %v, attempt %d", err, attempts)
			if attempts > 3 {
				// give up
				publicConn.Error("Too many failures starting proxy connection")
				return
			}
		} else {
			// success
			break
		}
	}

	// join the public and proxy connections
	bytesIn, bytesOut := conn.Join(publicConn, proxyConn)
	metrics.CloseConnection(t, publicConn, startTime, bytesIn, bytesOut)
}
开发者ID:nickpresta,项目名称:ngrok,代码行数:47,代码来源:tunnel.go

示例4: HandlePublicConnection

func (t *Tunnel) HandlePublicConnection(publicConn conn.Conn) {
	defer publicConn.Close()
	defer func() {
		if r := recover(); r != nil {
			publicConn.Warn("HandlePublicConnection failed with error %v", r)
		}
	}()

	metrics.requestTimer.Time(func() {
		metrics.requestMeter.Mark(1)

		t.Debug("Requesting new proxy connection")
		t.ctl.out <- &msg.ReqProxyMsg{}

		proxyConn := <-t.proxies
		t.Info("Returning proxy connection %s", proxyConn.Id())

		defer proxyConn.Close()
		conn.Join(publicConn, proxyConn)
	})
}
开发者ID:kyleconroy,项目名称:ngrok,代码行数:21,代码来源:tunnel.go

示例5: HandlePublicConnection

func (t *Tunnel) HandlePublicConnection(publicConn conn.Conn) {
	defer publicConn.Close()
	defer func() {
		if r := recover(); r != nil {
			publicConn.Warn("HandlePublicConnection failed with error %v", r)
		}
	}()

	startTime := time.Now()
	metrics.OpenConnection(t, publicConn)

	t.Debug("Requesting new proxy connection")
	t.ctl.out <- &msg.ReqProxyMsg{}

	proxyConn := <-t.proxies
	t.Info("Returning proxy connection %s", proxyConn.Id())

	defer proxyConn.Close()
	bytesIn, bytesOut := conn.Join(publicConn, proxyConn)

	metrics.CloseConnection(t, publicConn, startTime, bytesIn, bytesOut)
}
开发者ID:bitland,项目名称:ngrok,代码行数:22,代码来源:tunnel.go

示例6: NewProxy

func NewProxy(pxyConn conn.Conn, regPxy *msg.RegProxy) {
	// fail gracefully if the proxy connection fails to register
	defer func() {
		if r := recover(); r != nil {
			pxyConn.Warn("Failed with error: %v", r)
			pxyConn.Close()
		}
	}()

	// set logging prefix
	pxyConn.SetType("pxy")

	// look up the control connection for this proxy
	pxyConn.Info("Registering new proxy for %s", regPxy.ClientId)
	ctl := controlRegistry.Get(regPxy.ClientId)

	if ctl == nil {
		panic("No client found for identifier: " + regPxy.ClientId)
	}

	ctl.RegisterProxy(pxyConn)
}
开发者ID:0x19,项目名称:ngrok,代码行数:22,代码来源:main.go

示例7: proxy

// Establishes and manages a tunnel proxy connection with the server
func (c *ClientModel) proxy() {
	var (
		remoteConn conn.Conn
		err        error
	)

	if c.proxyUrl == "" {
		remoteConn, err = conn.Dial(c.serverAddr, "pxy", c.tlsConfig)
	} else {
		remoteConn, err = conn.DialHttpProxy(c.proxyUrl, c.serverAddr, "pxy", c.tlsConfig)
	}

	if err != nil {
		log.Error("Failed to establish proxy connection: %v", err)
		return
	}
	defer remoteConn.Close()

	err = msg.WriteMsg(remoteConn, &msg.RegProxy{ClientId: c.id})
	if err != nil {
		remoteConn.Error("Failed to write RegProxy: %v", err)
		return
	}

	// wait for the server to ack our register
	var startPxy msg.StartProxy
	if err = msg.ReadMsgInto(remoteConn, &startPxy); err != nil {
		remoteConn.Error("Server failed to write StartProxy: %v", err)
		return
	}

	tunnel, ok := c.tunnels[startPxy.Url]
	if !ok {
		remoteConn.Error("Couldn't find tunnel for proxy: %s", startPxy.Url)
		return
	}

	// start up the private connection
	start := time.Now()
	localConn, err := conn.Dial(tunnel.LocalAddr, "prv", nil)
	if err != nil {
		remoteConn.Warn("Failed to open private leg %s: %v", tunnel.LocalAddr, err)

		if tunnel.Protocol.GetName() == "http" {
			// try to be helpful when you're in HTTP mode and a human might see the output
			badGatewayBody := fmt.Sprintf(BadGateway, tunnel.PublicUrl, tunnel.LocalAddr, tunnel.LocalAddr)
			remoteConn.Write([]byte(fmt.Sprintf(`HTTP/1.0 502 Bad Gateway
Content-Type: text/html
Content-Length: %d

%s`, len(badGatewayBody), badGatewayBody)))
		}
		return
	}
	defer localConn.Close()

	m := c.metrics
	m.proxySetupTimer.Update(time.Since(start))
	m.connMeter.Mark(1)
	c.update()
	m.connTimer.Time(func() {
		localConn := tunnel.Protocol.WrapConn(localConn, mvc.ConnectionContext{Tunnel: tunnel, ClientAddr: startPxy.ClientAddr})
		bytesIn, bytesOut := conn.Join(localConn, remoteConn)
		m.bytesIn.Update(bytesIn)
		m.bytesOut.Update(bytesOut)
		m.bytesInCount.Inc(bytesIn)
		m.bytesOutCount.Inc(bytesOut)
	})
	c.update()
}
开发者ID:kevinburke,项目名称:ngrok,代码行数:71,代码来源:model.go

示例8: control


//.........这里部分代码省略.........
		Arch:      runtime.GOARCH,
		Version:   version.Proto,
		MmVersion: version.MajorMinor(),
		User:      c.authToken,
	}

	if err = msg.WriteMsg(ctlConn, auth); err != nil {
		panic(err)
	}

	// wait for the server to authenticate us
	var authResp msg.AuthResp
	if err = msg.ReadMsgInto(ctlConn, &authResp); err != nil {
		panic(err)
	}

	if authResp.Error != "" {
		emsg := fmt.Sprintf("Failed to authenticate to server: %s", authResp.Error)
		c.ctl.Shutdown(emsg)
		return
	}

	c.id = authResp.ClientId
	c.serverVersion = authResp.MmVersion
	c.Info("Authenticated with server, client id: %v", c.id)
	c.update()
	if err = SaveAuthToken(c.configPath, c.authToken); err != nil {
		c.Error("Failed to save auth token: %v", err)
	}

	// request tunnels
	reqIdToTunnelConfig := make(map[string]*TunnelConfiguration)
	for _, config := range c.tunnelConfig {
		// create the protocol list to ask for
		var protocols []string
		for proto, _ := range config.Protocols {
			protocols = append(protocols, proto)
		}

		reqTunnel := &msg.ReqTunnel{
			ReqId:      util.RandId(8),
			Protocol:   strings.Join(protocols, "+"),
			Hostname:   config.Hostname,
			Subdomain:  config.Subdomain,
			HttpAuth:   config.HttpAuth,
			RemotePort: config.RemotePort,
		}

		// send the tunnel request
		if err = msg.WriteMsg(ctlConn, reqTunnel); err != nil {
			panic(err)
		}

		// save request id association so we know which local address
		// to proxy to later
		reqIdToTunnelConfig[reqTunnel.ReqId] = config
	}

	// start the heartbeat
	lastPong := time.Now().UnixNano()
	c.ctl.Go(func() { c.heartbeat(&lastPong, ctlConn) })

	// main control loop
	for {
		var rawMsg msg.Message
		if rawMsg, err = msg.ReadMsg(ctlConn); err != nil {
			panic(err)
		}

		switch m := rawMsg.(type) {
		case *msg.ReqProxy:
			c.ctl.Go(c.proxy)

		case *msg.Pong:
			atomic.StoreInt64(&lastPong, time.Now().UnixNano())

		case *msg.NewTunnel:
			if m.Error != "" {
				emsg := fmt.Sprintf("Server failed to allocate tunnel: %s", m.Error)
				c.Error(emsg)
				c.ctl.Shutdown(emsg)
				continue
			}

			tunnel := mvc.Tunnel{
				PublicUrl: m.Url,
				LocalAddr: reqIdToTunnelConfig[m.ReqId].Protocols[m.Protocol],
				Protocol:  c.protoMap[m.Protocol],
			}

			c.tunnels[tunnel.PublicUrl] = tunnel
			c.connStatus = mvc.ConnOnline
			c.Info("Tunnel established at %v", tunnel.PublicUrl)
			c.update()

		default:
			ctlConn.Warn("Ignoring unknown control message %v ", m)
		}
	}
}
开发者ID:kevinburke,项目名称:ngrok,代码行数:101,代码来源:model.go

示例9: httpHandler

// Handles a new http connection from the public internet
func httpHandler(c conn.Conn, proto string) {
	defer c.Close()
	defer func() {
		// recover from failures
		if r := recover(); r != nil {
			c.Warn("httpHandler failed with error %v", r)
		}
	}()

	// Make sure we detect dead connections while we decide how to multiplex
	c.SetDeadline(time.Now().Add(connReadTimeout))

	// multiplex by extracting the Host header, the vhost library
	vhostConn, err := vhost.HTTP(c)
	if err != nil {
		c.Warn("Failed to read valid %s request: %v", proto, err)
		c.Write([]byte(BadRequest))
		return
	}

	// read out the Host header and auth from the request
	host := strings.ToLower(vhostConn.Host())
	auth := vhostConn.Request.Header.Get("Authorization")
	hostname, _, err := net.SplitHostPort(host)
	if err != nil {
		hostname = host
	} else {
		_, port, _ := net.SplitHostPort(c.LocalAddr().String())
		hostname = fmt.Sprintf("%s:%s", hostname, port)
	}
	paramSubdomain := vhostConn.Request.URL.Query().Get(SubDomainParamName) //url param

	if paramSubdomain == "" { //user-agent
		reg := regexp.MustCompile(fmt.Sprintf("%s/(\\w+)", SubDomainUserAgentName))
		matches := reg.FindStringSubmatch(vhostConn.Request.UserAgent())
		if len(matches) > 0 {
			paramSubdomain = matches[1]
		}
	}
	_, setCookieSubdomain := vhostConn.Request.URL.Query()[SetCookieSubDomainParamName]
	subdomainCookie, err := vhostConn.Request.Cookie(SubDomainCookieName)
	cookieSubdomain := ""
	if err == nil {
		cookieSubdomain = subdomainCookie.Value
	}

	// done reading mux data, free up the request memory
	vhostConn.Free()

	// We need to read from the vhost conn now since it mucked around reading the stream
	c = conn.Wrap(vhostConn, "pub")

	// multiplex to find the right backend host
	c.Debug("Found hostname %s in request", host)

	if paramSubdomain != "" {
		hostname = fmt.Sprintf("%s.%s", paramSubdomain, hostname)
	} else if cookieSubdomain != "" {
		hostname = fmt.Sprintf("%s.%s", cookieSubdomain, hostname)
	}

	tunnelKey := fmt.Sprintf("%s://%s", proto, hostname)

	tunnel := tunnelRegistry.Get(tunnelKey)
	if tunnel == nil {
		if setCookieSubdomain && paramSubdomain != "" {
			c.Info("Set %s to Cookie for hostname %s", paramSubdomain, tunnelKey)
			c.Write([]byte(fmt.Sprintf(SetCooikeResponse, len(proto)+len(hostname)+len(paramSubdomain)+48, SubDomainCookieName, paramSubdomain, proto, hostname, paramSubdomain)))
		} else {
			c.Info("No tunnel found for hostname %s", tunnelKey)
			c.Write([]byte(fmt.Sprintf(NotFound, len(hostname)+18, hostname)))
		}
		return
	}

	// If the client specified http auth and it doesn't match this request's auth
	// then fail the request with 401 Not Authorized and request the client reissue the
	// request with basic authdeny the request
	if tunnel.req.HttpAuth != "" && auth != tunnel.req.HttpAuth {
		c.Info("Authentication failed: %s", auth)
		c.Write([]byte(NotAuthorized))
		return
	}

	// dead connections will now be handled by tunnel heartbeating and the client
	c.SetDeadline(time.Time{})

	// let the tunnel handle the connection now
	tunnel.HandlePublicConnection(c)
}
开发者ID:tzraeq,项目名称:ngrok,代码行数:91,代码来源:http.go


注:本文中的ngrok/conn.Conn.Warn方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。