Golang Conn.Close方法代码示例

/*
 * Hearbeating to ensure our connection ngrokd is still live
 */
func heartbeat(lastPongAddr *int64, c conn.Conn) {
	lastPing := time.Unix(atomic.LoadInt64(lastPongAddr)-1, 0)
	ping := time.NewTicker(pingInterval)
	pongCheck := time.NewTicker(time.Second)

	defer func() {
		c.Close()
		ping.Stop()
		pongCheck.Stop()
	}()

	for {
		select {
		case <-pongCheck.C:
			lastPong := time.Unix(0, atomic.LoadInt64(lastPongAddr))
			needPong := lastPong.Sub(lastPing) < 0
			pongLatency := time.Since(lastPing)

			if needPong && pongLatency > maxPongLatency {
				c.Info("Last ping: %v, Last pong: %v", lastPing, lastPong)
				c.Info("Connection stale, haven't gotten PongMsg in %d seconds", int(pongLatency.Seconds()))
				return
			}

		case <-ping.C:
			err := msg.WriteMsg(c, &msg.PingMsg{})
			if err != nil {
				c.Debug("Got error %v when writing PingMsg", err)
				return
			}
			lastPing = time.Now()
		}
	}
}

// Handles a new http connection from the public internet
func httpHandler(c conn.Conn, proto string) {
	defer c.Close()
	defer func() {
		// recover from failures
		if r := recover(); r != nil {
			c.Warn("httpHandler failed with error %v", r)
		}
	}()

	// Make sure we detect dead connections while we decide how to multiplex
	c.SetDeadline(time.Now().Add(connReadTimeout))

	// multiplex by extracting the Host header, the vhost library
	vhostConn, err := vhost.HTTP(c)
	if err != nil {
		c.Warn("Failed to read valid %s request: %v", proto, err)
		c.Write([]byte(BadRequest))
		return
	}

	// read out the Host header and auth from the request
	host := strings.ToLower(vhostConn.Host())
	auth := vhostConn.Request.Header.Get("Authorization")

	// done reading mux data, free up the request memory
	vhostConn.Free()

	// We need to read from the vhost conn now since it mucked around reading the stream
	c = conn.Wrap(vhostConn, "pub")

	// multiplex to find the right backend host
	c.Debug("Found hostname %s in request", host)
	tunnel := tunnelRegistry.Get(fmt.Sprintf("%s://%s", proto, host))
	if tunnel == nil {
		tunnel = tunnelRegistry.Get(fmt.Sprintf("%s://%s%s", proto, host, opts.httpAddr))
	}
	if tunnel == nil {
		c.Info("No tunnel found for hostname %s", host)
		c.Write([]byte(fmt.Sprintf(NotFound, len(host)+18, host)))
		return
	}

	// If the client specified http auth and it doesn't match this request's auth
	// then fail the request with 401 Not Authorized and request the client reissue the
	// request with basic authdeny the request
	if tunnel.req.HttpAuth != "" && auth != tunnel.req.HttpAuth {
		c.Info("Authentication failed: %s", auth)
		c.Write([]byte(NotAuthorized))
		return
	}

	// dead connections will now be handled by tunnel heartbeating and the client
	c.SetDeadline(time.Time{})

	// let the tunnel handle the connection now
	tunnel.HandlePublicConnection(c)
}

func NewControl(ctlConn conn.Conn, authMsg *msg.Auth) {
	var err error

	// create the object
	// channels are buffered because we read and write to them
	// from the same goroutine in managerThread()
	c := &Control{
		auth:     authMsg,
		conn:     ctlConn,
		out:      make(chan msg.Message, 5),
		in:       make(chan msg.Message, 5),
		stop:     make(chan msg.Message, 5),
		proxies:  make(chan conn.Conn, 10),
		lastPing: time.Now(),
	}

	failAuth := func(e error) {
		_ = msg.WriteMsg(ctlConn, &msg.AuthResp{Error: e.Error()})
		ctlConn.Close()
	}

	// register the clientid
	c.id = authMsg.ClientId
	if c.id == "" {
		// it's a new session, assign an ID
		if c.id, err = util.SecureRandId(16); err != nil {
			failAuth(err)
			return
		}
	}

	if authMsg.Version != version.Proto {
		failAuth(fmt.Errorf("Incompatible versions. Server %s, client %s. Download a new version at http://ngrok.com", version.MajorMinor(), authMsg.Version))
		return
	}

	// register the control
	controlRegistry.Add(c.id, c)

	c.out <- &msg.AuthResp{
		Version:   version.Proto,
		MmVersion: version.MajorMinor(),
		ClientId:  c.id,
	}

	// As a performance optimization, ask for a proxy connection up front
	c.out <- &msg.ReqProxy{}

	// set logging prefix
	ctlConn.SetType("ctl")

	// manage the connection
	go c.managerThread()
	go c.readThread()
}

// mvc.Model interface
func (c *ClientModel) PlayRequest(tunnel mvc.Tunnel, payload []byte) {
	var localConn conn.Conn
	localConn, err := conn.Dial(tunnel.LocalAddr, "prv", nil)
	if err != nil {
		c.Warn("Failed to open private leg to %s: %v", tunnel.LocalAddr, err)
		return
	}

	defer localConn.Close()
	localConn = tunnel.Protocol.WrapConn(localConn, mvc.ConnectionContext{Tunnel: tunnel, ClientAddr: "127.0.0.1"})
	localConn.Write(payload)
	ioutil.ReadAll(localConn)
}

func (c *Control) RegisterProxy(conn conn.Conn) {
	if atomic.LoadInt32(&c.closing) == 1 {
		c.conn.Debug("Can't register proxies for a control that is closing")
		conn.Close()
		return
	}

	select {
	case c.proxies <- conn:
		c.conn.Info("Registered proxy connection %s", conn.Id())
	default:
		// c.proxies buffer is full, discard this one
		conn.Close()
	}
}

func (t *Tunnel) HandlePublicConnection(publicConn conn.Conn) {
	defer publicConn.Close()
	defer func() {
		if r := recover(); r != nil {
			publicConn.Warn("HandlePublicConnection failed with error %v", r)
		}
	}()

	startTime := time.Now()
	metrics.OpenConnection(t, publicConn)

	var proxyConn conn.Conn
	var attempts int
	var err error
	for {
		// get a proxy connection
		if proxyConn, err = t.ctl.GetProxy(); err != nil {
			t.Warn("Failed to get proxy connection: %v", err)
			return
		}
		defer proxyConn.Close()
		t.Info("Got proxy connection %s", proxyConn.Id())
		proxyConn.AddLogPrefix(t.Id())

		// tell the client we're going to start using this proxy connection
		startPxyMsg := &msg.StartProxy{
			Url:        t.url,
			ClientAddr: publicConn.RemoteAddr().String(),
		}
		if err = msg.WriteMsg(proxyConn, startPxyMsg); err != nil {
			attempts += 1
			proxyConn.Warn("Failed to write StartProxyMessage: %v, attempt %d", err, attempts)
			if attempts > 3 {
				// give up
				publicConn.Error("Too many failures starting proxy connection")
				return
			}
		} else {
			// success
			break
		}
	}

	// join the public and proxy connections
	bytesIn, bytesOut := conn.Join(publicConn, proxyConn)
	metrics.CloseConnection(t, publicConn, startTime, bytesIn, bytesOut)
}

func (c *Control) RegisterProxy(conn conn.Conn) {
	select {
	case c.proxies <- conn:
		c.conn.Info("Registered proxy connection %s", conn.Id())
	default:
		// c.proxies buffer is full, discard this one
		conn.Close()
	}
}

func (c *Control) RegisterProxy(conn conn.Conn) {
	conn.AddLogPrefix(c.id)

	select {
	case c.proxies <- conn:
		conn.Info("Registered")
	default:
		conn.Info("Proxies buffer is full, discarding.")
		conn.Close()
	}
}

func (t *Tunnel) HandlePublicConnection(publicConn conn.Conn) {
	defer publicConn.Close()
	defer func() {
		if r := recover(); r != nil {
			publicConn.Warn("HandlePublicConnection failed with error %v", r)
		}
	}()

	metrics.requestTimer.Time(func() {
		metrics.requestMeter.Mark(1)

		t.Debug("Requesting new proxy connection")
		t.ctl.out <- &msg.ReqProxyMsg{}

		proxyConn := <-t.proxies
		t.Info("Returning proxy connection %s", proxyConn.Id())

		defer proxyConn.Close()
		conn.Join(publicConn, proxyConn)
	})
}

func (c *Control) RegisterProxy(conn conn.Conn) {
	conn.AddLogPrefix(c.id)

	conn.SetDeadline(time.Now().Add(proxyStaleDuration))
	select {
	case c.proxies <- conn:
		conn.Info("Registered")
	default:
		conn.Info("Proxies buffer is full, discarding.")
		conn.Close()
	}
}

func (t *Tunnel) HandlePublicConnection(publicConn conn.Conn) {
	defer publicConn.Close()
	defer func() {
		if r := recover(); r != nil {
			publicConn.Warn("HandlePublicConnection failed with error %v", r)
		}
	}()

	startTime := time.Now()
	metrics.OpenConnection(t, publicConn)

	t.Debug("Requesting new proxy connection")
	t.ctl.out <- &msg.ReqProxyMsg{}

	proxyConn := <-t.proxies
	t.Info("Returning proxy connection %s", proxyConn.Id())

	defer proxyConn.Close()
	bytesIn, bytesOut := conn.Join(publicConn, proxyConn)

	metrics.CloseConnection(t, publicConn, startTime, bytesIn, bytesOut)
}

func NewProxy(pxyConn conn.Conn, regPxy *msg.RegProxy) {
	// fail gracefully if the proxy connection fails to register
	defer func() {
		if r := recover(); r != nil {
			pxyConn.Warn("Failed with error: %v", r)
			pxyConn.Close()
		}
	}()

	// set logging prefix
	pxyConn.SetType("pxy")

	// look up the control connection for this proxy
	pxyConn.Info("Registering new proxy for %s", regPxy.ClientId)
	ctl := controlRegistry.Get(regPxy.ClientId)

	if ctl == nil {
		panic("No client found for identifier: " + regPxy.ClientId)
	}

	ctl.RegisterProxy(pxyConn)
}

func (t *Tunnel) HandlePublicConnection(publicConn conn.Conn) {
	defer publicConn.Close()
	defer func() {
		if r := recover(); r != nil {
			publicConn.Warn("HandlePublicConnection failed with error %v", r)
		}
	}()

	startTime := time.Now()
	metrics.OpenConnection(t, publicConn)

	var proxyConn conn.Conn
	var err error
	for i := 0; i < (2 * proxyMaxPoolSize); i++ {
		// get a proxy connection
		if proxyConn, err = t.ctl.GetProxy(); err != nil {
			t.Warn("Failed to get proxy connection: %v", err)
			return
		}
		defer proxyConn.Close()
		t.Info("Got proxy connection %s", proxyConn.Id())
		proxyConn.AddLogPrefix(t.Id())

		// tell the client we're going to start using this proxy connection
		startPxyMsg := &msg.StartProxy{
			Url:        t.url,
			ClientAddr: publicConn.RemoteAddr().String(),
		}

		if err = msg.WriteMsg(proxyConn, startPxyMsg); err != nil {
			proxyConn.Warn("Failed to write StartProxyMessage: %v, attempt %d", err, i)
			proxyConn.Close()
		} else {
			// success
			break
		}
	}

	if err != nil {
		// give up
		publicConn.Error("Too many failures starting proxy connection")
		return
	}

	// To reduce latency handling tunnel connections, we employ the following curde heuristic:
	// Whenever we take a proxy connection from the pool, replace it with a new one
	util.PanicToError(func() { t.ctl.out <- &msg.ReqProxy{} })

	// no timeouts while connections are joined
	proxyConn.SetDeadline(time.Time{})

	// join the public and proxy connections
	bytesIn, bytesOut := conn.Join(publicConn, proxyConn)
	metrics.CloseConnection(t, publicConn, startTime, bytesIn, bytesOut)

	//log.Info("Proxy authId=%s bytesIn=%d, bytesOut=%d\n", t.ctl.userInfo.Uc.UserId, bytesIn, bytesOut)
	atomic.AddInt32(&t.ctl.userInfo.TransPerDay, int32(bytesIn+bytesOut))
	atomic.AddInt32(&t.ctl.userInfo.TransAll, int32(bytesIn+bytesOut))
}

// Establishes and manages a tunnel proxy connection with the server
func (c *ClientModel) proxy() {
	var (
		remoteConn conn.Conn
		err        error
	)

	if c.proxyUrl == "" {
		remoteConn, err = conn.Dial(c.serverAddr, "pxy", c.tlsConfig)
	} else {
		remoteConn, err = conn.DialHttpProxy(c.proxyUrl, c.serverAddr, "pxy", c.tlsConfig)
	}

	if err != nil {
		log.Error("Failed to establish proxy connection: %v", err)
		return
	}
	defer remoteConn.Close()

	err = msg.WriteMsg(remoteConn, &msg.RegProxy{ClientId: c.id})
	if err != nil {
		remoteConn.Error("Failed to write RegProxy: %v", err)
		return
	}

	// wait for the server to ack our register
	var startPxy msg.StartProxy
	if err = msg.ReadMsgInto(remoteConn, &startPxy); err != nil {
		remoteConn.Error("Server failed to write StartProxy: %v", err)
		return
	}

	tunnel, ok := c.tunnels[startPxy.Url]
	if !ok {
		remoteConn.Error("Couldn't find tunnel for proxy: %s", startPxy.Url)
		return
	}

	// start up the private connection
	start := time.Now()
	localConn, err := conn.Dial(tunnel.LocalAddr, "prv", nil)
	if err != nil {
		remoteConn.Warn("Failed to open private leg %s: %v", tunnel.LocalAddr, err)

		if tunnel.Protocol.GetName() == "http" {
			// try to be helpful when you're in HTTP mode and a human might see the output
			badGatewayBody := fmt.Sprintf(BadGateway, tunnel.PublicUrl, tunnel.LocalAddr, tunnel.LocalAddr)
			remoteConn.Write([]byte(fmt.Sprintf(`HTTP/1.0 502 Bad Gateway
Content-Type: text/html
Content-Length: %d

%s`, len(badGatewayBody), badGatewayBody)))
		}
		return
	}
	defer localConn.Close()

	m := c.metrics
	m.proxySetupTimer.Update(time.Since(start))
	m.connMeter.Mark(1)
	c.update()
	m.connTimer.Time(func() {
		localConn := tunnel.Protocol.WrapConn(localConn, mvc.ConnectionContext{Tunnel: tunnel, ClientAddr: startPxy.ClientAddr})
		bytesIn, bytesOut := conn.Join(localConn, remoteConn)
		m.bytesIn.Update(bytesIn)
		m.bytesOut.Update(bytesOut)
		m.bytesInCount.Inc(bytesIn)
		m.bytesOutCount.Inc(bytesOut)
	})
	c.update()
}

// Establishes and manages a tunnel control connection with the server
func (c *ClientModel) control() {
	defer func() {
		if r := recover(); r != nil {
			log.Error("control recovering from failure %v", r)
		}
	}()

	// establish control channel
	var (
		ctlConn conn.Conn
		err     error
	)
	if c.proxyUrl == "" {
		// simple non-proxied case, just connect to the server
		ctlConn, err = conn.Dial(c.serverAddr, "ctl", c.tlsConfig)
	} else {
		ctlConn, err = conn.DialHttpProxy(c.proxyUrl, c.serverAddr, "ctl", c.tlsConfig)
	}
	if err != nil {
		panic(err)
	}
	defer ctlConn.Close()

	// authenticate with the server
	auth := &msg.Auth{
		ClientId:  c.id,
		OS:        runtime.GOOS,
		Arch:      runtime.GOARCH,
		Version:   version.Proto,
		MmVersion: version.MajorMinor(),
		User:      c.authToken,
	}

	if err = msg.WriteMsg(ctlConn, auth); err != nil {
		panic(err)
	}

	// wait for the server to authenticate us
	var authResp msg.AuthResp
	if err = msg.ReadMsgInto(ctlConn, &authResp); err != nil {
		panic(err)
	}

	if authResp.Error != "" {
		emsg := fmt.Sprintf("Failed to authenticate to server: %s", authResp.Error)
		c.ctl.Shutdown(emsg)
		return
	}

	c.id = authResp.ClientId
	c.serverVersion = authResp.MmVersion
	c.Info("Authenticated with server, client id: %v", c.id)
	c.update()
	if err = SaveAuthToken(c.configPath, c.authToken); err != nil {
		c.Error("Failed to save auth token: %v", err)
	}

	// request tunnels
	reqIdToTunnelConfig := make(map[string]*TunnelConfiguration)
	for _, config := range c.tunnelConfig {
		// create the protocol list to ask for
		var protocols []string
		for proto, _ := range config.Protocols {
			protocols = append(protocols, proto)
		}

		reqTunnel := &msg.ReqTunnel{
			ReqId:      util.RandId(8),
			Protocol:   strings.Join(protocols, "+"),
			Hostname:   config.Hostname,
			Subdomain:  config.Subdomain,
			HttpAuth:   config.HttpAuth,
			RemotePort: config.RemotePort,
		}

		// send the tunnel request
		if err = msg.WriteMsg(ctlConn, reqTunnel); err != nil {
			panic(err)
		}

		// save request id association so we know which local address
		// to proxy to later
		reqIdToTunnelConfig[reqTunnel.ReqId] = config
	}

	// start the heartbeat
	lastPong := time.Now().UnixNano()
	c.ctl.Go(func() { c.heartbeat(&lastPong, ctlConn) })

	// main control loop
	for {
		var rawMsg msg.Message
		if rawMsg, err = msg.ReadMsg(ctlConn); err != nil {
			panic(err)
		}

		switch m := rawMsg.(type) {
		case *msg.ReqProxy:
			c.ctl.Go(c.proxy)
//.........这里部分代码省略.........