Golang Key.PrefixEnd方法代码示例

// Encodes datum at the end of key, using direction `dir` for the encoding.
// The key is a span end key, which is exclusive, but `val` needs to
// be inclusive. So if datum is the last end constraint, we transform it accordingly.
func encodeInclusiveEndValue(
	key roachpb.Key, datum parser.Datum, dir encoding.Direction,
	isLastEndConstraint bool) roachpb.Key {
	// Since the end of a span is exclusive, if the last constraint is an
	// inclusive one, we might need to make the key exclusive by applying a
	// PrefixEnd().  We normally avoid doing this by transforming "a = x" to
	// "a = x±1" for the last end constraint, depending on the encoding direction
	// (since this keeps the key nice and pretty-printable).
	// However, we might not be able to do the ±1.
	needExclusiveKey := false
	if isLastEndConstraint {
		if dir == encoding.Ascending {
			if datum.IsMax() {
				needExclusiveKey = true
			} else {
				datum = datum.Next()
			}
		} else {
			if datum.IsMin() || !datum.HasPrev() {
				needExclusiveKey = true
			} else {
				datum = datum.Prev()
			}
		}
	}
	key, pErr := encodeTableKey(key, datum, dir)
	if pErr != nil {
		panic(pErr)
	}
	if needExclusiveKey {
		key = key.PrefixEnd()
	}
	return key
}

// TODO(dt): Batch checks of many rows.
func (f baseFKHelper) check(values parser.DTuple) (parser.DTuple, error) {
	var key roachpb.Key
	if values != nil {
		keyBytes, _, err := sqlbase.EncodeIndexKey(f.searchIdx, f.ids, values, f.searchPrefix)
		if err != nil {
			return nil, err
		}
		key = roachpb.Key(keyBytes)
	} else {
		key = roachpb.Key(f.searchPrefix)
	}
	spans := sqlbase.Spans{sqlbase.Span{Start: key, End: key.PrefixEnd()}}
	if err := f.rf.StartScan(f.txn, spans, 1); err != nil {
		return nil, err
	}
	return f.rf.NextRow()
}

//.........这里部分代码省略.........
		}
		// Short circuit the backfill if the table has been deleted.
		if tableDesc.Deleted {
			done = true
			return nil
		}

		// Run a scan across the table using the primary key. Running
		// the scan and applying the changes in many transactions is
		// fine because the schema change is in the correct state to
		// handle intermediate OLTP commands which delete and add
		// values during the scan.
		b := &client.Batch{}
		b.Scan(sp.Start, sp.End, ColumnTruncateAndBackfillChunkSize)
		if err := txn.Run(b); err != nil {
			return err
		}

		// Use a different batch to truncate/backfill columns.
		writeBatch := &client.Batch{}
		marshalled := make([]roachpb.Value, len(defaultExprs))
		done = true
		for _, result := range b.Results {
			var sentinelKey roachpb.Key
			for _, kv := range result.Rows {
				// Still processing table.
				done = false
				if nonNullableColumn != "" {
					return fmt.Errorf("column %s contains null values", nonNullableColumn)
				}

				if sentinelKey == nil || !bytes.HasPrefix(kv.Key, sentinelKey) {
					// Sentinel keys have a 0 suffix indicating 0 bytes of
					// column ID. Strip off that suffix to determine the
					// prefix shared with the other keys for the row.
					sentinelKey = sqlbase.StripColumnIDLength(kv.Key)
					// Store away key for the next table row as the point from
					// which to start from.
					curSentinel = sentinelKey

					// Delete the entire dropped columns. This used to use SQL
					// UPDATE in the past to update the dropped column to
					// NULL; but a column in the process of being dropped is
					// placed in the table descriptor mutations, and a SQL
					// UPDATE of a column in mutations will fail.
					for _, columnDesc := range dropped {
						// Delete the dropped column.
						colKey := keys.MakeColumnKey(sentinelKey, uint32(columnDesc.ID))
						if log.V(2) {
							log.Infof("Del %s", colKey)
						}
						writeBatch.Del(colKey)
					}

					// Add the new columns and backfill the values.
					for i, expr := range defaultExprs {
						if expr == nil {
							continue
						}
						col := added[i]
						colKey := keys.MakeColumnKey(sentinelKey, uint32(col.ID))
						d, err := expr.Eval(evalCtx)
						if err != nil {
							return err
						}
						marshalled[i], err = sqlbase.MarshalColumnValue(col, d)
						if err != nil {
							return err
						}

						if log.V(2) {
							log.Infof("Put %s -> %v", colKey, d)
						}
						// Insert default value into the column. If this row
						// was recently added the default value might have
						// already been populated, because the
						// ColumnDescriptor is in the WRITE_ONLY state.
						// Reinserting the default value is not a big deal.
						//
						// Note: a column in the WRITE_ONLY state cannot be
						// populated directly through SQL. A SQL INSERT cannot
						// directly reference the column, and the INSERT
						// populates the column with the default value.
						writeBatch.Put(colKey, &marshalled[i])
					}
				}
			}
		}
		if err := txn.Run(writeBatch); err != nil {
			for _, r := range writeBatch.Results {
				if r.PErr != nil {
					return convertBackfillError(tableDesc, writeBatch, r.PErr)
				}
			}
			return err
		}
		return nil
	})
	return curSentinel.PrefixEnd(), done, err
}

//.........这里部分代码省略.........
		fkTables := TablesNeededForFKs(*tableDesc, CheckUpdates)
		for k := range fkTables {
			if fkTables[k], err = getTableDescFromID(txn, k); err != nil {
				return err
			}
		}
		// TODO(dan): Tighten up the bound on the requestedCols parameter to
		// makeRowUpdater.
		requestedCols := make([]sqlbase.ColumnDescriptor, 0, len(tableDesc.Columns)+len(added))
		requestedCols = append(requestedCols, tableDesc.Columns...)
		requestedCols = append(requestedCols, added...)
		ru, err := makeRowUpdater(
			txn, tableDesc, fkTables, updateCols, requestedCols, rowUpdaterOnlyColumns,
		)
		if err != nil {
			return err
		}

		// TODO(dan): This check is an unfortunate bleeding of the internals of
		// rowUpdater. Extract the sql row to k/v mapping logic out into something
		// usable here.
		if !ru.isColumnOnlyUpdate() {
			panic("only column data should be modified, but the rowUpdater is configured otherwise")
		}

		// Run a scan across the table using the primary key. Running
		// the scan and applying the changes in many transactions is
		// fine because the schema change is in the correct state to
		// handle intermediate OLTP commands which delete and add
		// values during the scan.
		var rf sqlbase.RowFetcher
		colIDtoRowIndex := colIDtoRowIndexFromCols(tableDesc.Columns)
		valNeededForCol := make([]bool, len(tableDesc.Columns))
		for i := range valNeededForCol {
			_, valNeededForCol[i] = ru.fetchColIDtoRowIndex[tableDesc.Columns[i].ID]
		}
		err = rf.Init(tableDesc, colIDtoRowIndex, &tableDesc.PrimaryIndex, false, false,
			tableDesc.Columns, valNeededForCol)
		if err != nil {
			return err
		}
		// StartScan uses 0 as a sentinal for the default limit of entries scanned.
		if err := rf.StartScan(txn, sqlbase.Spans{sp}, 0); err != nil {
			return err
		}

		indexKeyPrefix := sqlbase.MakeIndexKeyPrefix(tableDesc, tableDesc.PrimaryIndex.ID)
		oldValues := make(parser.DTuple, len(ru.fetchCols))
		updateValues := make(parser.DTuple, len(updateCols))

		writeBatch := &client.Batch{}
		var i int
		for ; i < ColumnTruncateAndBackfillChunkSize; i++ {
			row, err := rf.NextRow()
			if err != nil {
				return err
			}
			if row == nil {
				break // Done
			}

			curIndexKey, _, err = sqlbase.EncodeIndexKey(
				tableDesc, &tableDesc.PrimaryIndex, colIDtoRowIndex, row, indexKeyPrefix)

			for j, col := range added {
				if defaultExprs == nil || defaultExprs[j] == nil {
					updateValues[j] = parser.DNull
				} else {
					updateValues[j], err = defaultExprs[j].Eval(evalCtx)
					if err != nil {
						return err
					}
				}
				if !col.Nullable && updateValues[j].Compare(parser.DNull) == 0 {
					return sqlbase.NewNonNullViolationError(col.Name)
				}
			}
			for j := range dropped {
				updateValues[j+len(added)] = parser.DNull
			}

			copy(oldValues, row)
			for j := len(row); j < len(oldValues); j++ {
				oldValues[j] = parser.DNull
			}
			if _, err := ru.updateRow(writeBatch, oldValues, updateValues); err != nil {
				return err
			}
		}
		if i < ColumnTruncateAndBackfillChunkSize {
			done = true
		}

		if err := txn.Run(writeBatch); err != nil {
			return convertBackfillError(tableDesc, writeBatch)
		}
		return nil
	})
	return curIndexKey.PrefixEnd(), done, err
}