Golang roachpb.Key类代码示例

// getDescriptors looks up the range descriptor to use for a query over the
// key range [from,to), with the given lookupOptions. The range descriptor
// which contains the range in which the request should start its query is
// returned first; the returned bool is true in case the given range reaches
// outside the first descriptor.
// In case either of the descriptors is discovered stale, the returned closure
// should be called; it evicts the cache appropriately.
// Note that `from` and `to` are not necessarily Key and EndKey from a
// RequestHeader; it's assumed that they've been translated to key addresses
// already (via KeyAddress).
func (ds *DistSender) getDescriptors(from, to roachpb.Key, options lookupOptions) (*roachpb.RangeDescriptor, bool, func(), *roachpb.Error) {
	var desc *roachpb.RangeDescriptor
	var err error
	var descKey roachpb.Key
	if !options.useReverseScan {
		descKey = from
	} else {
		descKey = to
	}
	desc, err = ds.rangeCache.LookupRangeDescriptor(descKey, options)

	if err != nil {
		return nil, false, nil, roachpb.NewError(err)
	}

	// Checks whether need to get next range descriptor. If so, returns true.
	needAnother := func(desc *roachpb.RangeDescriptor, isReverse bool) bool {
		if isReverse {
			return from.Less(desc.StartKey)
		}
		return desc.EndKey.Less(to)
	}

	evict := func() {
		ds.rangeCache.EvictCachedRangeDescriptor(descKey, desc, options.useReverseScan)
	}

	return desc, needAnother(desc, options.useReverseScan), evict, nil
}

// Add the specified timestamp to the cache as covering the range of
// keys from start to end. If end is nil, the range covers the start
// key only. txnID is nil for no transaction. readOnly specifies
// whether the command adding this timestamp was read-only or not.
func (tc *TimestampCache) Add(start, end roachpb.Key, timestamp roachpb.Timestamp, txnID []byte, readOnly bool) {
	// This gives us a memory-efficient end key if end is empty.
	if len(end) == 0 {
		end = start.Next()
		start = end[:len(start)]
	}
	if tc.latest.Less(timestamp) {
		tc.latest = timestamp
	}
	// Only add to the cache if the timestamp is more recent than the
	// low water mark.
	if tc.lowWater.Less(timestamp) {
		// Check existing, overlapping entries. Remove superseded
		// entries or return without adding this entry if necessary.
		key := tc.cache.NewKey(start, end)
		for _, o := range tc.cache.GetOverlaps(start, end) {
			ce := o.Value.(cacheEntry)
			if ce.readOnly != readOnly {
				continue
			}
			if o.Key.Contains(key) && !ce.timestamp.Less(timestamp) {
				return // don't add this key; there's already a cache entry with >= timestamp.
			} else if key.Contains(o.Key) && !timestamp.Less(ce.timestamp) {
				tc.cache.Del(o.Key) // delete existing key; this cache entry supersedes.
			}
		}
		ce := cacheEntry{timestamp: timestamp, txnID: txnID, readOnly: readOnly}
		tc.cache.Add(key, ce)
	}
}

// clearOverlappingCachedRangeDescriptors looks up and clears any
// cache entries which overlap the specified key or descriptor.
func (rdc *rangeDescriptorCache) clearOverlappingCachedRangeDescriptors(key, metaKey roachpb.Key, desc *roachpb.RangeDescriptor) {
	if desc.StartKey.Equal(desc.EndKey) { // True for some unittests.
		return
	}
	// Clear out any descriptors which subsume the key which we're going
	// to cache. For example, if an existing KeyMin->KeyMax descriptor
	// should be cleared out in favor of a KeyMin->"m" descriptor.
	k, v, ok := rdc.rangeCache.Ceil(rangeCacheKey(metaKey))
	if ok {
		descriptor := v.(*roachpb.RangeDescriptor)
		if !key.Less(descriptor.StartKey) && !descriptor.EndKey.Less(key) {
			if log.V(1) {
				log.Infof("clearing overlapping descriptor: key=%s desc=%s", k, descriptor)
			}
			rdc.rangeCache.Del(k.(rangeCacheKey))
		}
	}
	// Also clear any descriptors which are subsumed by the one we're
	// going to cache. This could happen on a merge (and also happens
	// when there's a lot of concurrency). Iterate from the range meta key
	// after RangeMetaKey(desc.StartKey) to the range meta key for desc.EndKey.
	rdc.rangeCache.DoRange(func(k, v interface{}) {
		if log.V(1) {
			log.Infof("clearing subsumed descriptor: key=%s desc=%s", k, v.(*roachpb.RangeDescriptor))
		}
		rdc.rangeCache.Del(k.(rangeCacheKey))
	}, rangeCacheKey(keys.RangeMetaKey(desc.StartKey).Next()),
		rangeCacheKey(keys.RangeMetaKey(desc.EndKey)))
}

// prev gives the right boundary of the union of all requests which don't
// affect keys larger than the given key.
// TODO(tschottdorf): again, better on BatchRequest itself, but can't pull
// 'keys' into 'proto'.
func prev(ba roachpb.BatchRequest, k roachpb.Key) roachpb.Key {
	candidate := roachpb.KeyMin
	for _, union := range ba.Requests {
		h := union.GetInner().Header()
		addr := keys.KeyAddress(h.Key)
		eAddr := keys.KeyAddress(h.EndKey)
		if len(eAddr) == 0 {
			// Can probably avoid having to compute Next() here if
			// we're in the mood for some more complexity.
			eAddr = addr.Next()
		}
		if !eAddr.Less(k) {
			if !k.Less(addr) {
				// Range contains k, so won't be able to go lower.
				return k
			}
			// Range is disjoint from [KeyMin,k).
			continue
		}
		// We want the largest surviving candidate.
		if candidate.Less(addr) {
			candidate = addr
		}
	}
	return candidate
}

// prettyPrintInternal parse key with prefix in keyDict,
// if the key don't march any prefix in keyDict, return its byte value with quotation and false,
// or else return its human readable value and true.
func prettyPrintInternal(key roachpb.Key) (string, bool) {
	var buf bytes.Buffer
	for _, k := range keyDict {
		if key.Compare(k.start) >= 0 && (k.end == nil || key.Compare(k.end) <= 0) {
			buf.WriteString(k.name)
			if k.end != nil && k.end.Compare(key) == 0 {
				buf.WriteString("/Max")
				return buf.String(), true
			}

			hasPrefix := false
			for _, e := range k.entries {
				if bytes.HasPrefix(key, e.prefix) {
					hasPrefix = true
					key = key[len(e.prefix):]
					fmt.Fprintf(&buf, "%s%s", e.name, e.ppFunc(key))
					break
				}
			}
			if !hasPrefix {
				key = key[len(k.start):]
				fmt.Fprintf(&buf, "/%q", []byte(key))
			}

			return buf.String(), true
		}
	}

	return fmt.Sprintf("%q", []byte(key)), false
}

// addKeyRange adds the specified key range to the interval cache,
// taking care not to add this range if existing entries already
// completely cover the range.
func (tm *txnMetadata) addKeyRange(start, end roachpb.Key) {
	// This gives us a memory-efficient end key if end is empty.
	// The most common case for keys in the intents interval map
	// is for single keys. However, the interval cache requires
	// a non-empty interval, so we create two key slices which
	// share the same underlying byte array.
	if len(end) == 0 {
		end = start.Next()
		start = end[:len(start)]
	}
	key := tm.keys.MakeKey(start, end)
	for _, o := range tm.keys.GetOverlaps(key.Start, key.End) {
		if o.Key.Contains(key) {
			return
		} else if key.Contains(*o.Key) {
			tm.keys.Del(o.Key)
		}
	}

	// Since no existing key range fully covered this range, add it now. The
	// strange assignment to pkey makes sure we delay the heap allocation until
	// we know it is necessary.
	alloc := struct {
		key   cache.IntervalKey
		entry cache.Entry
	}{key: key}
	alloc.entry.Key = &alloc.key
	tm.keys.AddEntry(&alloc.entry)
}

// Encodes datum at the end of key, using direction `dir` for the encoding.
// The key is a span end key, which is exclusive, but `val` needs to
// be inclusive. So if datum is the last end constraint, we transform it accordingly.
func encodeInclusiveEndValue(
	key roachpb.Key, datum parser.Datum, dir encoding.Direction,
	isLastEndConstraint bool) roachpb.Key {
	// Since the end of a span is exclusive, if the last constraint is an
	// inclusive one, we might need to make the key exclusive by applying a
	// PrefixEnd().  We normally avoid doing this by transforming "a = x" to
	// "a = x±1" for the last end constraint, depending on the encoding direction
	// (since this keeps the key nice and pretty-printable).
	// However, we might not be able to do the ±1.
	needExclusiveKey := false
	if isLastEndConstraint {
		if dir == encoding.Ascending {
			if datum.IsMax() {
				needExclusiveKey = true
			} else {
				datum = datum.Next()
			}
		} else {
			if datum.IsMin() || !datum.HasPrev() {
				needExclusiveKey = true
			} else {
				datum = datum.Prev()
			}
		}
	}
	key, pErr := encodeTableKey(key, datum, dir)
	if pErr != nil {
		panic(pErr)
	}
	if needExclusiveKey {
		key = key.PrefixEnd()
	}
	return key
}

// GetIndex searches the kv list for 'key' and returns its index if found.
func (s SystemConfig) GetIndex(key roachpb.Key) (int, bool) {
	l := len(s.Values)
	index := sort.Search(l, func(i int) bool {
		return bytes.Compare(s.Values[i].Key, key) >= 0
	})
	if index == l || !key.Equal(s.Values[index].Key) {
		return 0, false
	}
	return index, true
}

// prettyKey pretty-prints the specified key, skipping over the first `skip`
// fields. The pretty printed key looks like:
//
//   /Table/<tableID>/<indexID>/...
//
// We always strip off the /Table prefix and then `skip` more fields. Note that
// this assumes that the fields themselves do not contain '/', but that is
// currently true for the fields we care about stripping (the table and index
// ID).
func prettyKey(key roachpb.Key, skip int) string {
	p := key.String()
	for i := 0; i <= skip; i++ {
		n := strings.IndexByte(p[1:], '/')
		if n == -1 {
			return ""
		}
		p = p[n+1:]
	}
	return p
}

// ComputeSplitKeys takes a start and end key and returns an array of keys
// at which to split the span [start, end).
// The only required splits are at each user table prefix.
func (s *SystemConfig) ComputeSplitKeys(startKey, endKey roachpb.Key) []roachpb.Key {
	if TestingDisableTableSplits {
		return nil
	}

	tableStart := roachpb.Key(keys.UserTableDataMin)
	if !tableStart.Less(endKey) {
		// This range is before the user tables span: no required splits.
		return nil
	}

	startID, ok := ObjectIDForKey(startKey)
	if !ok || startID <= keys.MaxReservedDescID {
		// The start key is either:
		// - not part of the structured data span
		// - part of the system span
		// In either case, start looking for splits at the first ID usable
		// by the user data span.
		startID = keys.MaxReservedDescID + 1
	} else {
		// The start key is either already a split key, or after the split
		// key for its ID. We can skip straight to the next one.
		startID++
	}

	// Find the largest object ID.
	// We can't keep splitting until we reach endKey as it could be roachpb.KeyMax.
	endID, err := s.GetLargestObjectID()
	if err != nil {
		log.Errorf("unable to determine largest object ID from system config: %s", err)
		return nil
	}

	// Build key prefixes for sequential table IDs until we reach endKey.
	var splitKeys roachpb.KeySlice
	var key roachpb.Key
	// endID could be smaller than startID if we don't have user tables.
	for id := startID; id <= endID; id++ {
		key = keys.MakeTablePrefix(id)
		// Skip if the range starts on a split key.
		if !startKey.Less(key) {
			continue
		}
		// Handle the case where EndKey is already a table prefix.
		if !key.Less(endKey) {
			break
		}
		splitKeys = append(splitKeys, key)
	}

	return splitKeys
}

// GetIndex searches the kv list for 'key' and returns its index if found.
func (s *SystemConfig) GetIndex(key roachpb.Key) (int, bool) {
	if s == nil {
		return 0, false
	}

	l := len(s.Values)
	index := sort.Search(l, func(i int) bool {
		return !s.Values[i].Key.Less(key)
	})
	if index == l || !key.Equal(s.Values[index].Key) {
		return 0, false
	}
	return index, true
}

// verifyBinarySearchTree checks to ensure that all keys to the left of the root
// node are less than it, and all nodes to the right of the root node are
// greater than it. It recursively walks the tree to perform this same check.
func verifyBinarySearchTree(t *testing.T, nodes map[string]roachpb.RangeTreeNode, testName string, node *roachpb.RangeTreeNode, keyMin, keyMax roachpb.Key) {
	if node == nil {
		return
	}
	if !node.Key.Less(keyMax) {
		t.Errorf("%s: Failed Property BST - The key %s is not less than %s.", testName, node.Key, keyMax)
	}
	// We need the extra check since roachpb.KeyMin is actually a range start key.
	if !keyMin.Less(node.Key) && !node.Key.Equal(roachpb.KeyMin) {
		t.Errorf("%s: Failed Property BST - The key %s is not greater than %s.", testName, node.Key, keyMin)
	}
	left, right := getLeftAndRight(t, nodes, testName, node)
	verifyBinarySearchTree(t, nodes, testName, left, keyMin, node.Key)
	verifyBinarySearchTree(t, nodes, testName, right, node.Key, keyMax)
}

// addKeyRange adds the specified key range to the range group,
// taking care not to add this range if existing entries already
// completely cover the range.
func addKeyRange(keys interval.RangeGroup, start, end roachpb.Key) {
	// This gives us a memory-efficient end key if end is empty.
	// The most common case for keys in the intents interval map
	// is for single keys. However, the range group requires
	// a non-empty interval, so we create two key slices which
	// share the same underlying byte array.
	if len(end) == 0 {
		end = start.Next()
		start = end[:len(start)]
	}
	keyR := interval.Range{
		Start: interval.Comparable(start),
		End:   interval.Comparable(end),
	}
	keys.Add(keyR)
}

// TODO(dt): Batch checks of many rows.
func (f baseFKHelper) check(values parser.DTuple) (parser.DTuple, error) {
	var key roachpb.Key
	if values != nil {
		keyBytes, _, err := sqlbase.EncodeIndexKey(f.searchIdx, f.ids, values, f.searchPrefix)
		if err != nil {
			return nil, err
		}
		key = roachpb.Key(keyBytes)
	} else {
		key = roachpb.Key(f.searchPrefix)
	}
	spans := sqlbase.Spans{sqlbase.Span{Start: key, End: key.PrefixEnd()}}
	if err := f.rf.StartScan(f.txn, spans, 1); err != nil {
		return nil, err
	}
	return f.rf.NextRow()
}

// GetMax returns the maximum read and write timestamps which overlap
// the interval spanning from start to end. Cached timestamps matching
// the specified txnID are not considered. If no part of the specified
// range is overlapped by timestamps in the cache, the low water
// timestamp is returned for both read and write timestamps.
//
// The txn ID prevents restarts with a pattern like: read("a"),
// write("a"). The read adds a timestamp for "a". Then the write (for
// the same transaction) would get that as the max timestamp and be
// forced to increment it. This allows timestamps from the same txn
// to be ignored.
func (tc *TimestampCache) GetMax(start, end roachpb.Key, txnID []byte) (roachpb.Timestamp, roachpb.Timestamp) {
	if len(end) == 0 {
		end = start.Next()
	}
	maxR := tc.lowWater
	maxW := tc.lowWater
	for _, o := range tc.cache.GetOverlaps(start, end) {
		ce := o.Value.(*cacheValue)
		if ce.txnID == nil || txnID == nil || !roachpb.TxnIDEqual(txnID, ce.txnID) {
			if ce.readOnly && maxR.Less(ce.timestamp) {
				maxR = ce.timestamp
			} else if !ce.readOnly && maxW.Less(ce.timestamp) {
				maxW = ce.timestamp
			}
		}
	}
	return maxR, maxW
}