Golang BatchRequest.Requests方法代码示例

// Send implements Sender.
// TODO(tschottdorf): We actually don't want to chop EndTransaction off for
// single-range requests (but that happens now since EndTransaction has the
// isAlone flag). Whether it is one or not is unknown right now (you can only
// find out after you've sent to the Range/looked up a descriptor that suggests
// that you're multi-range. In those cases, the wrapped sender should return an
// error so that we split and retry once the chunk which contains
// EndTransaction (i.e. the last one).
func (cs *chunkingSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	if len(ba.Requests) < 1 {
		panic("empty batch")
	}

	parts := ba.Split()
	var rplChunks []*roachpb.BatchResponse
	for _, part := range parts {
		ba.Requests = part
		// Increase the sequence counter to account for the fact that while
		// chunking, we're likely sending multiple requests to the same Replica.
		ba.SetNewRequest()
		rpl, err := cs.f(ctx, ba)
		if err != nil {
			return nil, err
		}
		// Propagate transaction from last reply to next request. The final
		// update is taken and put into the response's main header.
		ba.Txn.Update(rpl.Header().Txn)

		rplChunks = append(rplChunks, rpl)
	}

	reply := rplChunks[0]
	for _, rpl := range rplChunks[1:] {
		reply.Responses = append(reply.Responses, rpl.Responses...)
	}
	lastHeader := rplChunks[len(rplChunks)-1].BatchResponse_Header
	reply.Error = lastHeader.Error
	reply.Timestamp = lastHeader.Timestamp
	reply.Txn = ba.Txn
	return reply, nil
}

// sendAndFill is a helper which sends the given batch and fills its results,
// returning the appropriate error which is either from the first failing call,
// or an "internal" error.
func sendAndFill(
	send func(roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error),
	b *Batch,
) error {
	// Errors here will be attached to the results, so we will get them from
	// the call to fillResults in the regular case in which an individual call
	// fails. But send() also returns its own errors, so there's some dancing
	// here to do because we want to run fillResults() so that the individual
	// result gets initialized with an error from the corresponding call.
	var ba roachpb.BatchRequest
	// TODO(tschottdorf): this nonsensical copy is required since (at least at
	// the time of writing, the chunking and masking in DistSender operates on
	// the original data (as attested to by a whole bunch of test failures).
	ba.Requests = append([]roachpb.RequestUnion(nil), b.reqs...)
	ba.Header = b.Header
	b.response, b.pErr = send(ba)
	if b.pErr != nil {
		// Discard errors from fillResults.
		_ = b.fillResults()
		return b.pErr.GoError()
	}
	if err := b.fillResults(); err != nil {
		b.pErr = roachpb.NewError(err)
		return err
	}
	return nil
}

// Send implements Sender.
// TODO(tschottdorf): We actually don't want to chop EndTransaction off for
// single-range requests (but that happens now since EndTransaction has the
// isAlone flag). Whether it is one or not is unknown right now (you can only
// find out after you've sent to the Range/looked up a descriptor that suggests
// that you're multi-range. In those cases, the wrapped sender should return an
// error so that we split and retry once the chunk which contains
// EndTransaction (i.e. the last one).
func (cs *chunkingSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	if len(ba.Requests) < 1 {
		panic("empty batch")
	}

	// Deterministically create ClientCmdIDs for all parts of the batch if
	// a CmdID is already set (otherwise, leave them empty).
	var nextID func() roachpb.ClientCmdID
	empty := roachpb.ClientCmdID{}
	if empty == ba.CmdID {
		nextID = func() roachpb.ClientCmdID {
			return empty
		}
	} else {
		rng := rand.New(rand.NewSource(ba.CmdID.Random))
		id := ba.CmdID
		nextID = func() roachpb.ClientCmdID {
			curID := id             // copy
			id.Random = rng.Int63() // adjust for next call
			return curID
		}
	}

	parts := ba.Split()
	var rplChunks []*roachpb.BatchResponse
	for _, part := range parts {
		ba.Requests = part
		ba.CmdID = nextID()
		rpl, err := cs.f(ctx, ba)
		if err != nil {
			return nil, err
		}
		// Propagate transaction from last reply to next request. The final
		// update is taken and put into the response's main header.
		ba.Txn.Update(rpl.Header().Txn)

		rplChunks = append(rplChunks, rpl)
	}

	reply := rplChunks[0]
	for _, rpl := range rplChunks[1:] {
		reply.Responses = append(reply.Responses, rpl.Responses...)
	}
	lastHeader := rplChunks[len(rplChunks)-1].BatchResponse_Header
	reply.Error = lastHeader.Error
	reply.Timestamp = lastHeader.Timestamp
	reply.Txn = ba.Txn
	return reply, nil
}

// sendChunk is in charge of sending an "admissible" piece of batch, i.e. one
// which doesn't need to be subdivided further before going to a range (so no
// mixing of forward and reverse scans, etc). The parameters and return values
// correspond to client.Sender with the exception of the returned boolean,
// which is true when indicating that the caller should retry but needs to send
// EndTransaction in a separate request.
func (ds *DistSender) sendChunk(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error, bool) {
	isReverse := ba.IsReverse()

	trace := tracer.FromCtx(ctx)

	// The minimal key range encompassing all requests contained within.
	// Local addressing has already been resolved.
	// TODO(tschottdorf): consider rudimentary validation of the batch here
	// (for example, non-range requests with EndKey, or empty key ranges).
	rs := keys.Range(ba)
	var br *roachpb.BatchResponse
	// Send the request to one range per iteration.
	for {
		considerIntents := false
		var curReply *roachpb.BatchResponse
		var desc *roachpb.RangeDescriptor
		var needAnother bool
		var pErr *roachpb.Error
		for r := retry.Start(ds.rpcRetryOptions); r.Next(); {
			// Get range descriptor (or, when spanning range, descriptors). Our
			// error handling below may clear them on certain errors, so we
			// refresh (likely from the cache) on every retry.
			descDone := trace.Epoch("meta descriptor lookup")
			var evictDesc func()
			desc, needAnother, evictDesc, pErr = ds.getDescriptors(rs, considerIntents, isReverse)
			descDone()

			// getDescriptors may fail retryably if the first range isn't
			// available via Gossip.
			if pErr != nil {
				if pErr.Retryable {
					if log.V(1) {
						log.Warning(pErr)
					}
					continue
				}
				break
			}

			if needAnother && br == nil {
				// TODO(tschottdorf): we should have a mechanism for discovering
				// range merges (descriptor staleness will mostly go unnoticed),
				// or we'll be turning single-range queries into multi-range
				// queries for no good reason.

				// If there's no transaction and op spans ranges, possibly
				// re-run as part of a transaction for consistency. The
				// case where we don't need to re-run is if the read
				// consistency is not required.
				if ba.Txn == nil && ba.IsPossibleTransaction() &&
					ba.ReadConsistency != roachpb.INCONSISTENT {
					return nil, roachpb.NewError(&roachpb.OpRequiresTxnError{}), false
				}
				// If the request is more than but ends with EndTransaction, we
				// want the caller to come again with the EndTransaction in an
				// extra call.
				if l := len(ba.Requests) - 1; l > 0 && ba.Requests[l].GetInner().Method() == roachpb.EndTransaction {
					return nil, roachpb.NewError(errors.New("cannot send 1PC txn to multiple ranges")), true /* shouldSplitET */
				}
			}

			// It's possible that the returned descriptor misses parts of the
			// keys it's supposed to scan after it's truncated to match the
			// descriptor. Example revscan [a,g), first desc lookup for "g"
			// returns descriptor [c,d) -> [d,g) is never scanned.
			// We evict and retry in such a case.
			if (isReverse && !desc.ContainsKeyRange(desc.StartKey, rs.EndKey)) || (!isReverse && !desc.ContainsKeyRange(rs.Key, desc.EndKey)) {
				evictDesc()
				continue
			}

			curReply, pErr = func() (*roachpb.BatchResponse, *roachpb.Error) {
				// Truncate the request to our current key range.
				intersected, iErr := rs.Intersect(desc)
				if iErr != nil {
					return nil, roachpb.NewError(iErr)
				}
				truncBA, numActive, trErr := truncate(ba, intersected)
				if numActive == 0 && trErr == nil {
					// This shouldn't happen in the wild, but some tests
					// exercise it.
					return nil, roachpb.NewErrorf("truncation resulted in empty batch on [%s,%s): %s",
						rs.Key, rs.EndKey, ba)
				}
				if trErr != nil {
					return nil, roachpb.NewError(trErr)
				}

				return ds.sendSingleRange(trace, truncBA, desc)
			}()
			// If sending succeeded, break this loop.
			if pErr == nil {
				break
			}
//.........这里部分代码省略.........

// Send implements the batch.Sender interface. It subdivides
// the Batch into batches admissible for sending (preventing certain
// illegal mixtures of requests), executes each individual part
// (which may span multiple ranges), and recombines the response.
// When the request spans ranges, it is split up and the corresponding
// ranges queried serially, in ascending order.
// In particular, the first write in a transaction may not be part of the first
// request sent. This is relevant since the first write is a BeginTransaction
// request, thus opening up a window of time during which there may be intents
// of a transaction, but no entry. Pushing such a transaction will succeed, and
// may lead to the transaction being aborted early.
func (ds *DistSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	// In the event that timestamp isn't set and read consistency isn't
	// required, set the timestamp using the local clock.
	if ba.ReadConsistency == roachpb.INCONSISTENT && ba.Timestamp.Equal(roachpb.ZeroTimestamp) {
		ba.Timestamp = ds.clock.Now()
	}

	if ba.Txn != nil && len(ba.Txn.CertainNodes.Nodes) == 0 {
		// Ensure the local NodeID is marked as free from clock offset;
		// the transaction's timestamp was taken off the local clock.
		if nDesc := ds.getNodeDescriptor(); nDesc != nil {
			// TODO(tschottdorf): bad style to assume that ba.Txn is ours.
			// No race here, but should have a better way of doing this.
			// TODO(tschottdorf): future refactoring should move this to txn
			// creation in TxnCoordSender, which is currently unaware of the
			// NodeID (and wraps *DistSender through client.Sender since it
			// also needs test compatibility with *LocalSender).
			ba.Txn.CertainNodes.Add(nDesc.NodeID)
		}
	}

	if len(ba.Requests) < 1 {
		panic("empty batch")
	}

	var rplChunks []*roachpb.BatchResponse
	parts := ba.Split(false /* don't split ET */)
	for len(parts) > 0 {
		part := parts[0]
		ba.Requests = part
		rpl, pErr, shouldSplitET := ds.sendChunk(ctx, ba)
		if shouldSplitET {
			// If we tried to send a single round-trip EndTransaction but
			// it looks like it's going to hit multiple ranges, split it
			// here and try again.
			if len(parts) != 1 {
				panic("EndTransaction not in last chunk of batch")
			}
			parts = ba.Split(true /* split ET */)
			if len(parts) != 2 {
				panic("split of final EndTransaction chunk resulted in != 2 parts")
			}
			continue
		}
		if pErr != nil {
			return nil, pErr
		}
		// Propagate transaction from last reply to next request. The final
		// update is taken and put into the response's main header.
		ba.Txn.Update(rpl.Header().Txn)
		rplChunks = append(rplChunks, rpl)
		parts = parts[1:]
	}

	reply := rplChunks[0]
	for _, rpl := range rplChunks[1:] {
		reply.Responses = append(reply.Responses, rpl.Responses...)
	}
	*reply.Header() = rplChunks[len(rplChunks)-1].BatchResponse_Header
	return reply, nil
}

// Send implements the batch.Sender interface. It subdivides
// the Batch into batches admissible for sending (preventing certain
// illegal mixtures of requests), executes each individual part
// (which may span multiple ranges), and recombines the response.
// When the request spans ranges, it is split up and the corresponding
// ranges queried serially, in ascending order.
// In particular, the first write in a transaction may not be part of the first
// request sent. This is relevant since the first write is a BeginTransaction
// request, thus opening up a window of time during which there may be intents
// of a transaction, but no entry. Pushing such a transaction will succeed, and
// may lead to the transaction being aborted early.
func (ds *DistSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	tracing.AnnotateTrace()

	// In the event that timestamp isn't set and read consistency isn't
	// required, set the timestamp using the local clock.
	if ba.ReadConsistency == roachpb.INCONSISTENT && ba.Timestamp.Equal(hlc.ZeroTimestamp) {
		ba.Timestamp = ds.clock.Now()
	}

	if ba.Txn != nil {
		// Make a copy here since the code below modifies it in different places.
		// TODO(tschottdorf): be smarter about this - no need to do it for
		// requests that don't get split.
		txnClone := ba.Txn.Clone()
		ba.Txn = &txnClone

		if len(ba.Txn.ObservedTimestamps) == 0 {
			// Ensure the local NodeID is marked as free from clock offset;
			// the transaction's timestamp was taken off the local clock.
			if nDesc := ds.getNodeDescriptor(); nDesc != nil {
				// TODO(tschottdorf): future refactoring should move this to txn
				// creation in TxnCoordSender, which is currently unaware of the
				// NodeID (and wraps *DistSender through client.Sender since it
				// also needs test compatibility with *LocalSender).
				//
				// Taking care below to not modify any memory referenced from
				// our BatchRequest which may be shared with others.
				//
				// We already have a clone of our txn (see above), so we can
				// modify it freely.
				//
				// Zero the existing data. That makes sure that if we had
				// something of size zero but with capacity, we don't re-use the
				// existing space (which others may also use). This is just to
				// satisfy paranoia/OCD and not expected to matter in practice.
				ba.Txn.ResetObservedTimestamps()
				// OrigTimestamp is the HLC timestamp at which the Txn started, so
				// this effectively means no more uncertainty on this node.
				ba.Txn.UpdateObservedTimestamp(nDesc.NodeID, ba.Txn.OrigTimestamp)
			}
		}
	}

	if len(ba.Requests) < 1 {
		panic("empty batch")
	}

	if ba.MaxSpanRequestKeys != 0 {
		// Verify that the batch contains only specific range requests or the
		// Begin/EndTransactionRequest. Verify that a batch with a ReverseScan
		// only contains ReverseScan range requests.
		isReverse := ba.IsReverse()
		for _, req := range ba.Requests {
			inner := req.GetInner()
			switch inner.(type) {
			case *roachpb.ScanRequest, *roachpb.DeleteRangeRequest:
				// Accepted range requests. All other range requests are still
				// not supported.
				// TODO(vivek): don't enumerate all range requests.
				if isReverse {
					return nil, roachpb.NewErrorf("batch with limit contains both forward and reverse scans")
				}

			case *roachpb.BeginTransactionRequest, *roachpb.EndTransactionRequest, *roachpb.ReverseScanRequest:
				continue

			default:
				return nil, roachpb.NewErrorf("batch with limit contains %T request", inner)
			}
		}
	}

	var rplChunks []*roachpb.BatchResponse
	parts := ba.Split(false /* don't split ET */)
	if len(parts) > 1 && ba.MaxSpanRequestKeys != 0 {
		// We already verified above that the batch contains only scan requests of the same type.
		// Such a batch should never need splitting.
		panic("batch with MaxSpanRequestKeys needs splitting")
	}
	for len(parts) > 0 {
		part := parts[0]
		ba.Requests = part
		rpl, pErr, shouldSplitET := ds.sendChunk(ctx, ba)
		if shouldSplitET {
			// If we tried to send a single round-trip EndTransaction but
			// it looks like it's going to hit multiple ranges, split it
			// here and try again.
			if len(parts) != 1 {
				panic("EndTransaction not in last chunk of batch")
//.........这里部分代码省略.........

// truncate restricts all contained requests to the given key range
// and returns a new BatchRequest.
// All requests contained in that batch are "truncated" to the given
// span, inserting NoopRequest appropriately to replace requests which
// are left without a key range to operate on. The number of non-noop
// requests after truncation is returned.
func truncate(ba roachpb.BatchRequest, rs roachpb.RSpan) (roachpb.BatchRequest, int, error) {
	truncateOne := func(args roachpb.Request) (bool, roachpb.Span, error) {
		if _, ok := args.(*roachpb.NoopRequest); ok {
			return true, emptySpan, nil
		}
		header := args.Header()
		if !roachpb.IsRange(args) {
			// This is a point request.
			if len(header.EndKey) > 0 {
				return false, emptySpan, errors.Errorf("%T is not a range command, but EndKey is set", args)
			}
			keyAddr, err := keys.Addr(header.Key)
			if err != nil {
				return false, emptySpan, err
			}
			if !rs.ContainsKey(keyAddr) {
				return false, emptySpan, nil
			}
			return true, header, nil
		}
		// We're dealing with a range-spanning request.
		local := false
		keyAddr, err := keys.Addr(header.Key)
		if err != nil {
			return false, emptySpan, err
		}
		endKeyAddr, err := keys.Addr(header.EndKey)
		if err != nil {
			return false, emptySpan, err
		}
		if l, r := !keyAddr.Equal(header.Key), !endKeyAddr.Equal(header.EndKey); l || r {
			if !l || !r {
				return false, emptySpan, errors.Errorf("local key mixed with global key in range")
			}
			local = true
		}
		if keyAddr.Less(rs.Key) {
			// rs.Key can't be local because it contains range split points, which
			// are never local.
			if !local {
				header.Key = rs.Key.AsRawKey()
			} else {
				// The local start key should be truncated to the boundary of local keys which
				// address to rs.Key.
				header.Key = keys.MakeRangeKeyPrefix(rs.Key)
			}
		}
		if !endKeyAddr.Less(rs.EndKey) {
			// rs.EndKey can't be local because it contains range split points, which
			// are never local.
			if !local {
				header.EndKey = rs.EndKey.AsRawKey()
			} else {
				// The local end key should be truncated to the boundary of local keys which
				// address to rs.EndKey.
				header.EndKey = keys.MakeRangeKeyPrefix(rs.EndKey)
			}
		}
		// Check whether the truncation has left any keys in the range. If not,
		// we need to cut it out of the request.
		if header.Key.Compare(header.EndKey) >= 0 {
			return false, emptySpan, nil
		}
		return true, header, nil
	}

	var numNoop int
	origRequests := ba.Requests
	ba.Requests = make([]roachpb.RequestUnion, len(ba.Requests))
	for pos, arg := range origRequests {
		hasRequest, newHeader, err := truncateOne(arg.GetInner())
		if !hasRequest {
			// We omit this one, i.e. replace it with a Noop.
			numNoop++
			union := roachpb.RequestUnion{}
			union.MustSetInner(&noopRequest)
			ba.Requests[pos] = union
		} else {
			// Keep the old one. If we must adjust the header, must copy.
			if inner := origRequests[pos].GetInner(); newHeader.Equal(inner.Header()) {
				ba.Requests[pos] = origRequests[pos]
			} else {
				shallowCopy := inner.ShallowCopy()
				shallowCopy.SetHeader(newHeader)
				union := &ba.Requests[pos] // avoid operating on copy
				union.MustSetInner(shallowCopy)
			}
		}
		if err != nil {
			return roachpb.BatchRequest{}, 0, err
		}
	}
	return ba, len(ba.Requests) - numNoop, nil
}

// sendChunk is in charge of sending an "admissible" piece of batch, i.e. one
// which doesn't need to be subdivided further before going to a range (so no
// mixing of forward and reverse scans, etc). The parameters and return values
// correspond to client.Sender with the exception of the returned boolean,
// which is true when indicating that the caller should retry but needs to send
// EndTransaction in a separate request.
func (ds *DistSender) sendChunk(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error, bool) {
	isReverse := ba.IsReverse()

	ctx, cleanup := tracing.EnsureContext(ctx, ds.Tracer)
	defer cleanup()

	// The minimal key range encompassing all requests contained within.
	// Local addressing has already been resolved.
	// TODO(tschottdorf): consider rudimentary validation of the batch here
	// (for example, non-range requests with EndKey, or empty key ranges).
	rs, err := keys.Range(ba)
	if err != nil {
		return nil, roachpb.NewError(err), false
	}
	var br *roachpb.BatchResponse

	// Send the request to one range per iteration.
	for {
		// Increase the sequence counter only once before sending RPCs to
		// the ranges involved in this chunk of the batch (as opposed to for
		// each RPC individually). On RPC errors, there's no guarantee that
		// the request hasn't made its way to the target regardless of the
		// error; we'd like the second execution to be caught by the sequence
		// cache if that happens. There is a small chance that that we address
		// a range twice in this chunk (stale/suboptimal descriptors due to
		// splits/merges) which leads to a transaction retry.
		// TODO(tschottdorf): it's possible that if we don't evict from the
		//   cache we could be in for a busy loop.
		ba.SetNewRequest()

		var curReply *roachpb.BatchResponse
		var desc *roachpb.RangeDescriptor
		var evictToken evictionToken
		var needAnother bool
		var pErr *roachpb.Error
		var finished bool
		for r := retry.Start(ds.rpcRetryOptions); r.Next(); {
			// Get range descriptor (or, when spanning range, descriptors). Our
			// error handling below may clear them on certain errors, so we
			// refresh (likely from the cache) on every retry.
			log.Trace(ctx, "meta descriptor lookup")
			desc, needAnother, evictToken, pErr = ds.getDescriptors(rs, evictToken, isReverse)

			// getDescriptors may fail retryably if the first range isn't
			// available via Gossip.
			if pErr != nil {
				log.Trace(ctx, "range descriptor lookup failed: "+pErr.String())
				if pErr.Retryable {
					if log.V(1) {
						log.Warning(pErr)
					}
					continue
				}
				break
			} else {
				log.Trace(ctx, "looked up range descriptor")
			}

			if needAnother && br == nil {
				// TODO(tschottdorf): we should have a mechanism for discovering
				// range merges (descriptor staleness will mostly go unnoticed),
				// or we'll be turning single-range queries into multi-range
				// queries for no good reason.

				// If there's no transaction and op spans ranges, possibly
				// re-run as part of a transaction for consistency. The
				// case where we don't need to re-run is if the read
				// consistency is not required.
				if ba.Txn == nil && ba.IsPossibleTransaction() &&
					ba.ReadConsistency != roachpb.INCONSISTENT {
					return nil, roachpb.NewError(&roachpb.OpRequiresTxnError{}), false
				}
				// If the request is more than but ends with EndTransaction, we
				// want the caller to come again with the EndTransaction in an
				// extra call.
				if l := len(ba.Requests) - 1; l > 0 && ba.Requests[l].GetInner().Method() == roachpb.EndTransaction {
					return nil, roachpb.NewError(errors.New("cannot send 1PC txn to multiple ranges")), true /* shouldSplitET */
				}
			}

			// It's possible that the returned descriptor misses parts of the
			// keys it's supposed to scan after it's truncated to match the
			// descriptor. Example revscan [a,g), first desc lookup for "g"
			// returns descriptor [c,d) -> [d,g) is never scanned.
			// We evict and retry in such a case.
			includesFrontOfCurSpan := func(rd *roachpb.RangeDescriptor) bool {
				if isReverse {
					// This approach is needed because rs.EndKey is exclusive.
					return desc.ContainsKeyRange(desc.StartKey, rs.EndKey)
				}
				return desc.ContainsKey(rs.Key)
			}
			if !includesFrontOfCurSpan(desc) {
				if err := evictToken.Evict(); err != nil {
//.........这里部分代码省略.........

// send runs the specified calls synchronously in a single batch and
// returns any errors. If the transaction is read-only or has already
// been successfully committed or aborted, a potential trailing
// EndTransaction call is silently dropped, allowing the caller to
// always commit or clean-up explicitly even when that may not be
// required (or even erroneous). Returns (nil, nil) for an empty batch.
func (txn *Txn) send(ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {

	if txn.Proto.Status != roachpb.PENDING || txn.IsFinalized() {
		return nil, roachpb.NewErrorf(
			"attempting to use transaction with wrong status or finalized: %s", txn.Proto.Status)
	}

	// It doesn't make sense to use inconsistent reads in a transaction. However,
	// we still need to accept it as a parameter for this to compile.
	if ba.ReadConsistency != roachpb.CONSISTENT {
		return nil, roachpb.NewErrorf("cannot use %s ReadConsistency in txn",
			ba.ReadConsistency)
	}

	lastIndex := len(ba.Requests) - 1
	if lastIndex < 0 {
		return nil, nil
	}

	// firstWriteIndex is set to the index of the first command which is
	// a transactional write. If != -1, this indicates an intention to
	// write. This is in contrast to txn.Proto.Writing, which is set by
	// the coordinator when the first intent has been created, and which
	// lives for the life of the transaction.
	firstWriteIndex := -1
	var firstWriteKey roachpb.Key

	for i, ru := range ba.Requests {
		args := ru.GetInner()
		if i < lastIndex {
			if _, ok := args.(*roachpb.EndTransactionRequest); ok {
				return nil, roachpb.NewErrorf("%s sent as non-terminal call", args.Method())
			}
		}
		if roachpb.IsTransactionWrite(args) && firstWriteIndex == -1 {
			firstWriteKey = args.Header().Key
			firstWriteIndex = i
		}
	}

	haveTxnWrite := firstWriteIndex != -1
	endTxnRequest, haveEndTxn := ba.Requests[lastIndex].GetInner().(*roachpb.EndTransactionRequest)
	needBeginTxn := !txn.Proto.Writing && haveTxnWrite
	needEndTxn := txn.Proto.Writing || haveTxnWrite
	elideEndTxn := haveEndTxn && !needEndTxn

	// If we're not yet writing in this txn, but intend to, insert a
	// begin transaction request before the first write command.
	if needBeginTxn {
		// If the transaction already has a key (we're in a restart), make
		// sure we set the key in the begin transaction request to the original.
		bt := &roachpb.BeginTransactionRequest{
			Span: roachpb.Span{
				Key: firstWriteKey,
			},
		}
		if txn.Proto.Key != nil {
			bt.Key = txn.Proto.Key
		}
		// Inject the new request before position firstWriteIndex, taking
		// care to avoid unnecessary allocations.
		oldRequests := ba.Requests
		ba.Requests = make([]roachpb.RequestUnion, len(ba.Requests)+1)
		copy(ba.Requests, oldRequests[:firstWriteIndex])
		ba.Requests[firstWriteIndex].MustSetInner(bt)
		copy(ba.Requests[firstWriteIndex+1:], oldRequests[firstWriteIndex:])
	}

	if elideEndTxn {
		ba.Requests = ba.Requests[:lastIndex]
	}

	br, pErr := txn.db.send(ba)
	if elideEndTxn && pErr == nil {
		// Check that read only transactions do not violate their deadline. This can NOT
		// happen since the txn deadline is normally updated when it is about to expire
		// or expired. We will just keep the code for safety (see TestReacquireLeaseOnRestart).
		if endTxnRequest.Deadline != nil {
			if endTxnRequest.Deadline.Less(txn.Proto.Timestamp) {
				return nil, roachpb.NewErrorWithTxn(roachpb.NewTransactionAbortedError(), &txn.Proto)
			}
		}
		// This normally happens on the server and sent back in response
		// headers, but this transaction was optimized away. The caller may
		// still inspect the transaction struct, so we manually update it
		// here to emulate a true transaction.
		if endTxnRequest.Commit {
			txn.Proto.Status = roachpb.COMMITTED
		} else {
			txn.Proto.Status = roachpb.ABORTED
		}
		txn.finalized = true
	}

//.........这里部分代码省略.........

// Send implements the batch.Sender interface. It subdivides
// the Batch into batches admissible for sending (preventing certain
// illegal mixtures of requests), executes each individual part
// (which may span multiple ranges), and recombines the response.
// When the request spans ranges, it is split up and the corresponding
// ranges queried serially, in ascending order.
// In particular, the first write in a transaction may not be part of the first
// request sent. This is relevant since the first write is a BeginTransaction
// request, thus opening up a window of time during which there may be intents
// of a transaction, but no entry. Pushing such a transaction will succeed, and
// may lead to the transaction being aborted early.
func (ds *DistSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	tracing.AnnotateTrace()

	// In the event that timestamp isn't set and read consistency isn't
	// required, set the timestamp using the local clock.
	if ba.ReadConsistency == roachpb.INCONSISTENT && ba.Timestamp.Equal(roachpb.ZeroTimestamp) {
		ba.Timestamp = ds.clock.Now()
	}

	if ba.Txn != nil && len(ba.Txn.CertainNodes.Nodes) == 0 {
		// Ensure the local NodeID is marked as free from clock offset;
		// the transaction's timestamp was taken off the local clock.
		if nDesc := ds.getNodeDescriptor(); nDesc != nil {
			// TODO(tschottdorf): future refactoring should move this to txn
			// creation in TxnCoordSender, which is currently unaware of the
			// NodeID (and wraps *DistSender through client.Sender since it
			// also needs test compatibility with *LocalSender).
			//
			// Taking care below to not modify any memory referenced from
			// our BatchRequest which may be shared with others.
			// First, get a shallow clone of our txn (since that holds the
			// NodeList struct).
			txnShallow := *ba.Txn
			// Next, zero out the NodeList pointer. That makes sure that
			// if we had something of size zero but with capacity, we don't
			// re-use the existing space (which others may also use).
			txnShallow.CertainNodes.Nodes = nil
			txnShallow.CertainNodes.Add(nDesc.NodeID)
			ba.Txn = &txnShallow
		}
	}

	if len(ba.Requests) < 1 {
		panic("empty batch")
	}

	var rplChunks []*roachpb.BatchResponse
	parts := ba.Split(false /* don't split ET */)
	for len(parts) > 0 {
		part := parts[0]
		ba.Requests = part
		rpl, pErr, shouldSplitET := ds.sendChunk(ctx, ba)
		if shouldSplitET {
			// If we tried to send a single round-trip EndTransaction but
			// it looks like it's going to hit multiple ranges, split it
			// here and try again.
			if len(parts) != 1 {
				panic("EndTransaction not in last chunk of batch")
			}
			parts = ba.Split(true /* split ET */)
			if len(parts) != 2 {
				panic("split of final EndTransaction chunk resulted in != 2 parts")
			}
			continue
		}
		if pErr != nil {
			return nil, pErr
		}
		// Propagate transaction from last reply to next request. The final
		// update is taken and put into the response's main header.
		ba.Txn.Update(rpl.Header().Txn)
		rplChunks = append(rplChunks, rpl)
		parts = parts[1:]
	}

	reply := rplChunks[0]
	for _, rpl := range rplChunks[1:] {
		reply.Responses = append(reply.Responses, rpl.Responses...)
	}
	*reply.Header() = rplChunks[len(rplChunks)-1].BatchResponse_Header
	return reply, nil
}

// truncate restricts all contained requests to the given key range
// and returns a new BatchRequest.
// All requests contained in that batch are "truncated" to the given
// span, inserting NoopRequest appropriately to replace requests which
// are left without a key range to operate on. The number of non-noop
// requests after truncation is returned.
func truncate(ba roachpb.BatchRequest, rs roachpb.RSpan) (roachpb.BatchRequest, int, error) {
	truncateOne := func(args roachpb.Request) (bool, roachpb.Span, error) {
		if _, ok := args.(*roachpb.NoopRequest); ok {
			return true, emptySpan, nil
		}
		header := *args.Header()
		if !roachpb.IsRange(args) {
			// This is a point request.
			if len(header.EndKey) > 0 {
				return false, emptySpan, util.Errorf("%T is not a range command, but EndKey is set", args)
			}
			if !rs.ContainsKey(keys.Addr(header.Key)) {
				return false, emptySpan, nil
			}
			return true, header, nil
		}
		// We're dealing with a range-spanning request.
		keyAddr, endKeyAddr := keys.Addr(header.Key), keys.Addr(header.EndKey)
		if l, r := !keyAddr.Equal(header.Key), !endKeyAddr.Equal(header.EndKey); l || r {
			if !rs.ContainsKeyRange(keyAddr, endKeyAddr) {
				return false, emptySpan, util.Errorf("local key range must not span ranges")
			}
			if !l || !r {
				return false, emptySpan, util.Errorf("local key mixed with global key in range")
			}
			// Range-local local key range.
			return true, header, nil
		}
		// Below, {end,}keyAddr equals header.{End,}Key, so nothing is local.
		if keyAddr.Less(rs.Key) {
			header.Key = rs.Key.AsRawKey() // "key" can't be local
			keyAddr = rs.Key
		}
		if !endKeyAddr.Less(rs.EndKey) {
			header.EndKey = rs.EndKey.AsRawKey() // "endKey" can't be local
			endKeyAddr = rs.EndKey
		}
		// Check whether the truncation has left any keys in the range. If not,
		// we need to cut it out of the request.
		if !keyAddr.Less(endKeyAddr) {
			return false, emptySpan, nil
		}
		return true, header, nil
	}

	var numNoop int
	origRequests := ba.Requests
	ba.Requests = make([]roachpb.RequestUnion, len(ba.Requests))
	for pos, arg := range origRequests {
		hasRequest, newHeader, err := truncateOne(arg.GetInner())
		if !hasRequest {
			// We omit this one, i.e. replace it with a Noop.
			numNoop++
			nReq := roachpb.RequestUnion{}
			if !nReq.SetValue(&roachpb.NoopRequest{}) {
				panic("RequestUnion excludes NoopRequest")
			}
			ba.Requests[pos] = nReq
		} else {
			// Keep the old one. If we must adjust the header, must copy.
			// TODO(tschottdorf): this could wind up cloning big chunks of data.
			// Can optimize by creating a new Request manually, but with the old
			// data.
			if newHeader.Equal(*origRequests[pos].GetInner().Header()) {
				ba.Requests[pos] = origRequests[pos]
			} else {
				ba.Requests[pos] = *proto.Clone(&origRequests[pos]).(*roachpb.RequestUnion)
				*ba.Requests[pos].GetInner().Header() = newHeader
			}
		}
		if err != nil {
			return roachpb.BatchRequest{}, 0, err
		}
	}
	return ba, len(ba.Requests) - numNoop, nil
}

// truncate restricts all contained requests to the given key range
// and returns a new BatchRequest.
// All requests contained in that batch are "truncated" to the given
// span, inserting NoopRequest appropriately to replace requests which
// are left without a key range to operate on. The number of non-noop
// requests after truncation is returned.
func truncate(ba roachpb.BatchRequest, rs roachpb.RSpan) (roachpb.BatchRequest, int, error) {
	truncateOne := func(args roachpb.Request) (bool, roachpb.Span, error) {
		if _, ok := args.(*roachpb.NoopRequest); ok {
			return true, emptySpan, nil
		}
		header := args.Header()
		if !roachpb.IsRange(args) {
			// This is a point request.
			if len(header.EndKey) > 0 {
				return false, emptySpan, util.Errorf("%T is not a range command, but EndKey is set", args)
			}
			if !rs.ContainsKey(keys.Addr(header.Key)) {
				return false, emptySpan, nil
			}
			return true, header, nil
		}
		// We're dealing with a range-spanning request.
		keyAddr, endKeyAddr := keys.Addr(header.Key), keys.Addr(header.EndKey)
		if l, r := !keyAddr.Equal(header.Key), !endKeyAddr.Equal(header.EndKey); l || r {
			if !rs.ContainsKeyRange(keyAddr, endKeyAddr) {
				return false, emptySpan, util.Errorf("local key range must not span ranges")
			}
			if !l || !r {
				return false, emptySpan, util.Errorf("local key mixed with global key in range")
			}
			// Range-local local key range.
			return true, header, nil
		}
		// Below, {end,}keyAddr equals header.{End,}Key, so nothing is local.
		if keyAddr.Less(rs.Key) {
			header.Key = rs.Key.AsRawKey() // "key" can't be local
			keyAddr = rs.Key
		}
		if !endKeyAddr.Less(rs.EndKey) {
			header.EndKey = rs.EndKey.AsRawKey() // "endKey" can't be local
			endKeyAddr = rs.EndKey
		}
		// Check whether the truncation has left any keys in the range. If not,
		// we need to cut it out of the request.
		if !keyAddr.Less(endKeyAddr) {
			return false, emptySpan, nil
		}
		return true, header, nil
	}

	var numNoop int
	origRequests := ba.Requests
	ba.Requests = make([]roachpb.RequestUnion, len(ba.Requests))
	for pos, arg := range origRequests {
		hasRequest, newHeader, err := truncateOne(arg.GetInner())
		if !hasRequest {
			// We omit this one, i.e. replace it with a Noop.
			numNoop++
			union := roachpb.RequestUnion{}
			if !union.SetInner(&noopRequest) {
				panic(fmt.Sprintf("%T excludes %T", union, noopRequest))
			}
			ba.Requests[pos] = union
		} else {
			// Keep the old one. If we must adjust the header, must copy.
			if inner := origRequests[pos].GetInner(); newHeader.Equal(inner.Header()) {
				ba.Requests[pos] = origRequests[pos]
			} else {
				shallowCopy := inner.ShallowCopy()
				shallowCopy.SetHeader(newHeader)
				if union := &ba.Requests[pos]; !union.SetInner(shallowCopy) {
					panic(fmt.Sprintf("%T excludes %T", union, shallowCopy))
				}
			}
		}
		if err != nil {
			return roachpb.BatchRequest{}, 0, err
		}
	}
	return ba, len(ba.Requests) - numNoop, nil
}