Golang roachpb.BatchRequest类代码示例

// send runs the specified calls synchronously in a single batch and returns
// any errors. Returns a nil response for empty input (no requests).
func (db *DB) send(maxScanResults int64, reqs ...roachpb.Request) (
	*roachpb.BatchResponse, *roachpb.Error) {
	if len(reqs) == 0 {
		return nil, nil
	}

	ba := roachpb.BatchRequest{}
	ba.Add(reqs...)

	ba.MaxScanResults = maxScanResults
	if db.userPriority != 1 {
		ba.UserPriority = db.userPriority
	}

	tracing.AnnotateTrace()

	br, pErr := db.sender.Send(context.TODO(), ba)
	if pErr != nil {
		if log.V(1) {
			log.Infof("failed batch: %s", pErr)
		}
		return nil, pErr
	}
	return br, nil
}

func (ts *txnSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	// Send call through wrapped sender.
	ba.Txn = &ts.Proto
	ba.SetNewRequest()
	br, pErr := ts.wrapped.Send(ctx, ba)
	if br != nil && br.Error != nil {
		panic(roachpb.ErrorUnexpectedlySet(ts.wrapped, br))
	}

	// TODO(tschottdorf): see about using only the top-level *roachpb.Error
	// information for this restart logic (includes adding the Txn).
	err := pErr.GoError()
	// Only successful requests can carry an updated Txn in their response
	// header. Any error (e.g. a restart) can have a Txn attached to them as
	// well; those update our local state in the same way for the next attempt.
	// The exception is if our transaction was aborted and needs to restart
	// from scratch, in which case we do just that.
	if err == nil {
		ts.Proto.Update(br.Txn)
		return br, nil
	} else if abrtErr, ok := err.(*roachpb.TransactionAbortedError); ok {
		// On Abort, reset the transaction so we start anew on restart.
		ts.Proto = roachpb.Transaction{
			Name:      ts.Proto.Name,
			Isolation: ts.Proto.Isolation,
		}
		if abrtTxn := abrtErr.Transaction(); abrtTxn != nil {
			// Acts as a minimum priority on restart.
			ts.Proto.Priority = abrtTxn.Priority
		}
	} else if txnErr, ok := err.(roachpb.TransactionRestartError); ok {
		ts.Proto.Update(txnErr.Transaction())
	}
	return nil, pErr
}

func (ts *txnSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	// Send call through wrapped sender.
	ba.Txn = &ts.Proto
	ba.SetNewRequest()
	br, pErr := ts.wrapped.Send(ctx, ba)
	if br != nil && br.Error != nil {
		panic(roachpb.ErrorUnexpectedlySet(ts.wrapped, br))
	}

	// Only successful requests can carry an updated Txn in their response
	// header. Any error (e.g. a restart) can have a Txn attached to them as
	// well; those update our local state in the same way for the next attempt.
	// The exception is if our transaction was aborted and needs to restart
	// from scratch, in which case we do just that.
	if pErr == nil {
		ts.Proto.Update(br.Txn)
		return br, nil
	} else if _, ok := pErr.GoError().(*roachpb.TransactionAbortedError); ok {
		// On Abort, reset the transaction so we start anew on restart.
		ts.Proto = roachpb.Transaction{
			Name:      ts.Proto.Name,
			Isolation: ts.Proto.Isolation,
		}
		// Acts as a minimum priority on restart.
		if pErr.GetTxn() != nil {
			ts.Proto.Priority = pErr.GetTxn().Priority
		}
	} else if pErr.TransactionRestart != roachpb.TransactionRestart_ABORT {
		ts.Proto.Update(pErr.GetTxn())
	}
	return nil, pErr
}

// sendAndFill is a helper which sends the given batch and fills its results,
// returning the appropriate error which is either from the first failing call,
// or an "internal" error.
func sendAndFill(
	send func(roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error),
	b *Batch,
) error {
	// Errors here will be attached to the results, so we will get them from
	// the call to fillResults in the regular case in which an individual call
	// fails. But send() also returns its own errors, so there's some dancing
	// here to do because we want to run fillResults() so that the individual
	// result gets initialized with an error from the corresponding call.
	var ba roachpb.BatchRequest
	// TODO(tschottdorf): this nonsensical copy is required since (at least at
	// the time of writing, the chunking and masking in DistSender operates on
	// the original data (as attested to by a whole bunch of test failures).
	ba.Requests = append([]roachpb.RequestUnion(nil), b.reqs...)
	ba.Header = b.Header
	b.response, b.pErr = send(ba)
	if b.pErr != nil {
		// Discard errors from fillResults.
		_ = b.fillResults()
		return b.pErr.GoError()
	}
	if err := b.fillResults(); err != nil {
		b.pErr = roachpb.NewError(err)
		return err
	}
	return nil
}

// RangeLookup dispatches an RangeLookup request for the given
// metadata key to the replicas of the given range. Note that we allow
// inconsistent reads when doing range lookups for efficiency. Getting
// stale data is not a correctness problem but instead may
// infrequently result in additional latency as additional range
// lookups may be required. Note also that rangeLookup bypasses the
// DistSender's Send() method, so there is no error inspection and
// retry logic here; this is not an issue since the lookup performs a
// single inconsistent read only.
func (ds *DistSender) RangeLookup(key roachpb.RKey, desc *roachpb.RangeDescriptor, considerIntents, useReverseScan bool) ([]roachpb.RangeDescriptor, *roachpb.Error) {
	ba := roachpb.BatchRequest{}
	ba.ReadConsistency = roachpb.INCONSISTENT
	ba.Add(&roachpb.RangeLookupRequest{
		Span: roachpb.Span{
			// We can interpret the RKey as a Key here since it's a metadata
			// lookup; those are never local.
			Key: key.AsRawKey(),
		},
		MaxRanges:       ds.rangeLookupMaxRanges,
		ConsiderIntents: considerIntents,
		Reverse:         useReverseScan,
	})
	replicas := newReplicaSlice(ds.gossip, desc)
	trace := ds.Tracer.StartSpan("range lookup")
	defer trace.Finish()
	// TODO(tschottdorf): Ideally we would use the trace of the request which
	// caused this lookup instead of a new one.
	br, err := ds.sendRPC(trace, desc.RangeID, replicas, orderRandom, ba)
	if err != nil {
		return nil, err
	}
	if br.Error != nil {
		return nil, br.Error
	}
	return br.Responses[0].GetInner().(*roachpb.RangeLookupResponse).Ranges, nil
}

// Send implements the batch.Sender interface. It subdivides
// the Batch into batches admissible for sending (preventing certain
// illegal mixtures of requests), executes each individual part
// (which may span multiple ranges), and recombines the response.
func (ds *DistSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	// In the event that timestamp isn't set and read consistency isn't
	// required, set the timestamp using the local clock.
	// TODO(tschottdorf): right place for this?
	if ba.ReadConsistency == roachpb.INCONSISTENT && ba.Timestamp.Equal(roachpb.ZeroTimestamp) {
		// Make sure that after the call, args hasn't changed.
		defer func(timestamp roachpb.Timestamp) {
			ba.Timestamp = timestamp
		}(ba.Timestamp)
		ba.Timestamp = ds.clock.Now()
	}

	if ba.Txn != nil && len(ba.Txn.CertainNodes.Nodes) == 0 {
		// Ensure the local NodeID is marked as free from clock offset;
		// the transaction's timestamp was taken off the local clock.
		if nDesc := ds.getNodeDescriptor(); nDesc != nil {
			// TODO(tschottdorf): bad style to assume that ba.Txn is ours.
			// No race here, but should have a better way of doing this.
			// TODO(tschottdorf): future refactoring should move this to txn
			// creation in TxnCoordSender, which is currently unaware of the
			// NodeID (and wraps *DistSender through client.Sender since it
			// also needs test compatibility with *LocalSender).
			ba.Txn.CertainNodes.Add(nDesc.NodeID)
		}
	}

	// TODO(tschottdorf): provisional instantiation.
	return newChunkingSender(ds.sendChunk).Send(ctx, ba)
}

// RangeLookup implements the RangeDescriptorDB interface.
// RangeLookup dispatches a RangeLookup request for the given metadata
// key to the replicas of the given range. Note that we allow
// inconsistent reads when doing range lookups for efficiency. Getting
// stale data is not a correctness problem but instead may
// infrequently result in additional latency as additional range
// lookups may be required. Note also that rangeLookup bypasses the
// DistSender's Send() method, so there is no error inspection and
// retry logic here; this is not an issue since the lookup performs a
// single inconsistent read only.
func (ds *DistSender) RangeLookup(
	key roachpb.RKey, desc *roachpb.RangeDescriptor, considerIntents, useReverseScan bool,
) ([]roachpb.RangeDescriptor, []roachpb.RangeDescriptor, *roachpb.Error) {
	ba := roachpb.BatchRequest{}
	ba.ReadConsistency = roachpb.INCONSISTENT
	ba.Add(&roachpb.RangeLookupRequest{
		Span: roachpb.Span{
			// We can interpret the RKey as a Key here since it's a metadata
			// lookup; those are never local.
			Key: key.AsRawKey(),
		},
		MaxRanges:       ds.rangeLookupMaxRanges,
		ConsiderIntents: considerIntents,
		Reverse:         useReverseScan,
	})
	replicas := newReplicaSlice(ds.gossip, desc)
	replicas.Shuffle()
	// TODO(tschottdorf): Ideally we would use the trace of the request which
	// caused this lookup.
	_ = context.TODO()
	br, err := ds.sendRPC(ds.Ctx, desc.RangeID, replicas, ba)
	if err != nil {
		return nil, nil, roachpb.NewError(err)
	}
	if br.Error != nil {
		return nil, nil, br.Error
	}
	resp := br.Responses[0].GetInner().(*roachpb.RangeLookupResponse)
	return resp.Ranges, resp.PrefetchedRanges, nil
}

// RangeLookup dispatches an RangeLookup request for the given
// metadata key to the replicas of the given range. Note that we allow
// inconsistent reads when doing range lookups for efficiency. Getting
// stale data is not a correctness problem but instead may
// infrequently result in additional latency as additional range
// lookups may be required. Note also that rangeLookup bypasses the
// DistSender's Send() method, so there is no error inspection and
// retry logic here; this is not an issue since the lookup performs a
// single inconsistent read only.
func (ds *DistSender) RangeLookup(key roachpb.RKey, desc *roachpb.RangeDescriptor, considerIntents, useReverseScan bool) ([]roachpb.RangeDescriptor, *roachpb.Error) {
	ba := roachpb.BatchRequest{}
	ba.ReadConsistency = roachpb.INCONSISTENT
	ba.Add(&roachpb.RangeLookupRequest{
		Span: roachpb.Span{
			// We can interpret the RKey as a Key here since it's a metadata
			// lookup; those are never local.
			Key: key.AsRawKey(),
		},
		MaxRanges:       ds.rangeLookupMaxRanges,
		ConsiderIntents: considerIntents,
		Reverse:         useReverseScan,
	})
	replicas := newReplicaSlice(ds.gossip, desc)
	// TODO(tschottdorf) consider a Trace here, potentially that of the request
	// that had the cache miss and waits for the result.
	br, err := ds.sendRPC(nil /* Trace */, desc.RangeID, replicas, rpc.OrderRandom, ba)
	if err != nil {
		return nil, err
	}
	if br.Error != nil {
		return nil, br.Error
	}
	return br.Responses[0].GetInner().(*roachpb.RangeLookupResponse).Ranges, nil
}

// rangeLookup dispatches an RangeLookup request for the given
// metadata key to the replicas of the given range. Note that we allow
// inconsistent reads when doing range lookups for efficiency. Getting
// stale data is not a correctness problem but instead may
// infrequently result in additional latency as additional range
// lookups may be required. Note also that rangeLookup bypasses the
// DistSender's Send() method, so there is no error inspection and
// retry logic here; this is not an issue since the lookup performs a
// single inconsistent read only.
func (ds *DistSender) rangeLookup(key roachpb.Key, options lookupOptions,
	desc *roachpb.RangeDescriptor) ([]roachpb.RangeDescriptor, error) {
	ba := roachpb.BatchRequest{}
	ba.ReadConsistency = roachpb.INCONSISTENT
	ba.Add(&roachpb.RangeLookupRequest{
		RequestHeader: roachpb.RequestHeader{
			Key:             key,
			ReadConsistency: roachpb.INCONSISTENT,
		},
		MaxRanges:       ds.rangeLookupMaxRanges,
		ConsiderIntents: options.considerIntents,
		Reverse:         options.useReverseScan,
	})
	replicas := newReplicaSlice(ds.gossip, desc)
	// TODO(tschottdorf) consider a Trace here, potentially that of the request
	// that had the cache miss and waits for the result.
	br, err := ds.sendRPC(nil /* Trace */, desc.RangeID, replicas, rpc.OrderRandom, ba)
	if err != nil {
		return nil, err
	}
	if err := br.GoError(); err != nil {
		return nil, err
	}
	return br.Responses[0].GetInner().(*roachpb.RangeLookupResponse).Ranges, nil
}

// Send forwards the call to the single store. This is a poor man's
// version of kv.TxnCoordSender, but it serves the purposes of
// supporting tests in this package. Transactions are not supported.
// Since kv/ depends on storage/, we can't get access to a
// TxnCoordSender from here.
// TODO(tschottdorf): {kv->storage}.LocalSender
func (db *testSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	if et, ok := ba.GetArg(roachpb.EndTransaction); ok {
		return nil, roachpb.NewError(util.Errorf("%s method not supported", et.Method()))
	}
	// Lookup range and direct request.
	key, endKey := keys.Range(ba)
	rng := db.store.LookupReplica(key, endKey)
	if rng == nil {
		return nil, roachpb.NewError(roachpb.NewRangeKeyMismatchError(key, endKey, nil))
	}
	ba.RangeID = rng.Desc().RangeID
	replica := rng.GetReplica()
	if replica == nil {
		return nil, roachpb.NewError(util.Errorf("own replica missing in range"))
	}
	ba.Replica = *replica
	br, pErr := db.store.Send(ctx, ba)
	if br != nil && br.Error != nil {
		panic(roachpb.ErrorUnexpectedlySet(db.store, br))
	}
	if pErr != nil {
		return nil, pErr
	}
	return br, nil
}

// Send implements Sender.
// TODO(tschottdorf): We actually don't want to chop EndTransaction off for
// single-range requests (but that happens now since EndTransaction has the
// isAlone flag). Whether it is one or not is unknown right now (you can only
// find out after you've sent to the Range/looked up a descriptor that suggests
// that you're multi-range. In those cases, the wrapped sender should return an
// error so that we split and retry once the chunk which contains
// EndTransaction (i.e. the last one).
func (cs *chunkingSender) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	if len(ba.Requests) < 1 {
		panic("empty batch")
	}

	parts := ba.Split()
	var rplChunks []*roachpb.BatchResponse
	for _, part := range parts {
		ba.Requests = part
		// Increase the sequence counter to account for the fact that while
		// chunking, we're likely sending multiple requests to the same Replica.
		ba.SetNewRequest()
		rpl, err := cs.f(ctx, ba)
		if err != nil {
			return nil, err
		}
		// Propagate transaction from last reply to next request. The final
		// update is taken and put into the response's main header.
		ba.Txn.Update(rpl.Header().Txn)

		rplChunks = append(rplChunks, rpl)
	}

	reply := rplChunks[0]
	for _, rpl := range rplChunks[1:] {
		reply.Responses = append(reply.Responses, rpl.Responses...)
	}
	lastHeader := rplChunks[len(rplChunks)-1].BatchResponse_Header
	reply.Error = lastHeader.Error
	reply.Timestamp = lastHeader.Timestamp
	reply.Txn = ba.Txn
	return reply, nil
}

// sendAttempt gathers and rearranges the replicas, and makes an RPC call.
func (ds *DistSender) sendAttempt(trace *tracer.Trace, ba roachpb.BatchRequest, desc *roachpb.RangeDescriptor) (*roachpb.BatchResponse, *roachpb.Error) {
	defer trace.Epoch("sending RPC")()

	leader := ds.leaderCache.Lookup(roachpb.RangeID(desc.RangeID))

	// Try to send the call.
	replicas := newReplicaSlice(ds.gossip, desc)

	// Rearrange the replicas so that those replicas with long common
	// prefix of attributes end up first. If there's no prefix, this is a
	// no-op.
	order := ds.optimizeReplicaOrder(replicas)

	// If this request needs to go to a leader and we know who that is, move
	// it to the front.
	if !(ba.IsReadOnly() && ba.ReadConsistency == roachpb.INCONSISTENT) &&
		leader.StoreID > 0 {
		if i := replicas.FindReplica(leader.StoreID); i >= 0 {
			replicas.MoveToFront(i)
			order = rpc.OrderStable
		}
	}

	br, err := ds.sendRPC(trace, desc.RangeID, replicas, order, ba)
	if err != nil {
		return nil, roachpb.NewError(err)
	}
	// Untangle the error from the received response.
	pErr := br.Error
	br.Error = nil // scrub the response error
	return br, pErr
}

func testPut() roachpb.BatchRequest {
	var ba roachpb.BatchRequest
	ba.Timestamp = testTS
	put := &roachpb.PutRequest{}
	put.Key = testKey
	ba.Add(put)
	return ba
}

// Send implements the client.Sender interface. The store is looked up from the
// store map if specified by the request; otherwise, the command is being
// executed locally, and the replica is determined via lookup through each
// store's LookupRange method. The latter path is taken only by unit tests.
func (ls *Stores) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	var store *Store
	var err error

	// If we aren't given a Replica, then a little bending over
	// backwards here. This case applies exclusively to unittests.
	if ba.RangeID == 0 || ba.Replica.StoreID == 0 {
		var repl *roachpb.ReplicaDescriptor
		var rangeID roachpb.RangeID
		rs := keys.Range(ba)
		rangeID, repl, err = ls.lookupReplica(rs.Key, rs.EndKey)
		if err == nil {
			ba.RangeID = rangeID
			ba.Replica = *repl
		}
	}

	ctx = log.Add(ctx,
		log.RangeID, ba.RangeID)

	if err == nil {
		store, err = ls.GetStore(ba.Replica.StoreID)
	}

	if err != nil {
		return nil, roachpb.NewError(err)
	}

	sp, cleanupSp := tracing.SpanFromContext(opStores, store.Tracer(), ctx)
	defer cleanupSp()
	if ba.Txn != nil {
		// For calls that read data within a txn, we keep track of timestamps
		// observed from the various participating nodes' HLC clocks. If we have
		// a timestamp on file for this Node which is smaller than MaxTimestamp,
		// we can lower MaxTimestamp accordingly. If MaxTimestamp drops below
		// OrigTimestamp, we effectively can't see uncertainty restarts any
		// more.
		// Note that it's not an issue if MaxTimestamp propagates back out to
		// the client via a returned Transaction update - when updating a Txn
		// from another, the larger MaxTimestamp wins.
		if maxTS, ok := ba.Txn.GetObservedTimestamp(ba.Replica.NodeID); ok && maxTS.Less(ba.Txn.MaxTimestamp) {
			// Copy-on-write to protect others we might be sharing the Txn with.
			shallowTxn := *ba.Txn
			// The uncertainty window is [OrigTimestamp, maxTS), so if that window
			// is empty, there won't be any uncertainty restarts.
			if !ba.Txn.OrigTimestamp.Less(maxTS) {
				sp.LogEvent("read has no clock uncertainty")
			}
			shallowTxn.MaxTimestamp.Backward(maxTS)
			ba.Txn = &shallowTxn
		}
	}
	br, pErr := store.Send(ctx, ba)
	if br != nil && br.Error != nil {
		panic(roachpb.ErrorUnexpectedlySet(store, br))
	}
	return br, pErr
}

// Send implements the client.Sender interface. The store is looked up from the
// store map if specified by the request; otherwise, the command is being
// executed locally, and the replica is determined via lookup through each
// store's LookupRange method. The latter path is taken only by unit tests.
func (ls *Stores) Send(ctx context.Context, ba roachpb.BatchRequest) (*roachpb.BatchResponse, *roachpb.Error) {
	sp := tracing.SpanFromContext(ctx)
	var store *Store
	var pErr *roachpb.Error

	// If we aren't given a Replica, then a little bending over
	// backwards here. This case applies exclusively to unittests.
	if ba.RangeID == 0 || ba.Replica.StoreID == 0 {
		var repl *roachpb.ReplicaDescriptor
		var rangeID roachpb.RangeID
		rs := keys.Range(ba)
		rangeID, repl, pErr = ls.lookupReplica(rs.Key, rs.EndKey)
		if pErr == nil {
			ba.RangeID = rangeID
			ba.Replica = *repl
		}
	}

	ctx = log.Add(ctx,
		log.RangeID, ba.RangeID)

	if pErr == nil {
		store, pErr = ls.GetStore(ba.Replica.StoreID)
	}

	var br *roachpb.BatchResponse
	if pErr != nil {
		return nil, pErr
	}
	// For calls that read data within a txn, we can avoid uncertainty
	// related retries in certain situations. If the node is in
	// "CertainNodes", we need not worry about uncertain reads any
	// more. Setting MaxTimestamp=OrigTimestamp for the operation
	// accomplishes that. See roachpb.Transaction.CertainNodes for details.
	if ba.Txn != nil && ba.Txn.CertainNodes.Contains(ba.Replica.NodeID) {
		// MaxTimestamp = Timestamp corresponds to no clock uncertainty.
		sp.LogEvent("read has no clock uncertainty")
		// Copy-on-write to protect others we might be sharing the Txn with.
		shallowTxn := *ba.Txn
		// We set to OrigTimestamp because that works for both SNAPSHOT and
		// SERIALIZABLE: If we used Timestamp instead, we could run into
		// unnecessary retries at SNAPSHOT. For example, a SNAPSHOT txn at
		// OrigTimestamp = 1000.0, Timestamp = 2000.0, MaxTimestamp = 3000.0
		// will always read at 1000, so a MaxTimestamp of 2000 will still let
		// it restart with uncertainty when it finds a value in (1000, 2000).
		shallowTxn.MaxTimestamp = ba.Txn.OrigTimestamp
		ba.Txn = &shallowTxn
	}
	br, pErr = store.Send(ctx, ba)
	if br != nil && br.Error != nil {
		panic(roachpb.ErrorUnexpectedlySet(store, br))
	}
	return br, pErr
}