本文整理汇总了C#中Udbus.UdbusMethodMessage方法的典型用法代码示例。如果您正苦于以下问题：C# Udbus.UdbusMethodMessage方法的具体用法？C# Udbus.UdbusMethodMessage怎么用？C# Udbus.UdbusMethodMessage使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类Udbus的用法示例。
在下文中一共展示了Udbus.UdbusMethodMessage方法的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: TestDbusHelloImpl
static void TestDbusHelloImpl(Udbus.Serialization.UdbusMessageBuilderTracker builder, Udbus.Core.IUdbusMessageVisitor visitor, Udbus.Serialization.UdbusConnector connector,
System.Threading.ManualResetEvent stop, PreNextActionDelegate preNextAction)
{
int result = -1;
//Udbus.v4v.v4vConnection connection = new Udbus.v4v.v4vConnection(Console_io_debug);
//Udbus.Serialization.ManagedDbusIo dbio;
//connection.PopulateDbio(ref dbio);
//Udbus.Core.UdbusFunctions.dbus_auth(ref dbio, "Dude");
//Udbus.Serialization.UdbusConnector connector = Udbus.Serialization.UdbusConnector.CreateAuthorised(connection);
// Visitors
preNextAction("Hello");
// Hello.
using (var msg = builder.UdbusMethodMessage(
"org.freedesktop.DBus", "/org/freedesktop/DBus",
"org.freedesktop.DBus", "Hello").Message)
{
result = connector.Send(msg);
Console.WriteLine("Hello send result: {0}", result);
Udbus.Core.UdbusVisitorFunctions.Visit(result, msg, new Udbus.Core.UdbusMessageVisitorDumpConsole());
}
//var recv = connector.Receive(out result);
Udbus.Serialization.NMessageStruct.UdbusMessageHandle recv;
result = connector.ReceiveStruct(out recv);
Console.WriteLine("Hello recv result: {0}. msg: {1}", result, recv);
}示例2: TestDbusReadIcon
static void TestDbusReadIcon(Udbus.Serialization.UdbusMessageBuilderTracker builder, Udbus.Core.IUdbusMessageVisitor visitor, Udbus.Serialization.UdbusConnector connector,
System.Threading.ManualResetEvent stop, PreNextActionDelegate preNextAction)
{
int result = -1;
//Udbus.v4v.v4vConnection connection = new Udbus.v4v.v4vConnection(Console_io_debug);
//Udbus.Serialization.ManagedDbusIo dbio;
//connection.PopulateDbio(ref dbio);
//Udbus.Core.UdbusFunctions.dbus_auth(ref dbio, "Dude");
//Udbus.Serialization.UdbusConnector connector = Udbus.Serialization.UdbusConnector.CreateAuthorised(connection);
// Visitors
preNextAction("readicon");
// list_vms.
using (var msg = builder.UdbusMethodMessage(
"com.citrix.xenclient.xenmgr", "/",
"com.citrix.xenclient.xenmgr",
"list_vms").Message)
{
result = connector.Send(msg);
Console.WriteLine("list_vms send result: {0}", result);
}
Udbus.Serialization.NMessageStruct.UdbusMessageHandle recv;
using (var msg = Udbus.Core.UdbusVisitorFunctions.LoopUdbusFind(connector, visitor, Console.Out, stop).Handle)
{
msg.HandleToStructure(out recv);
Console.WriteLine("list_vms recv result: {0}. msg: {1}", result, recv);
Udbus.Serialization.UdbusMessageReader reader = new Udbus.Serialization.UdbusMessageReader(msg);
uint counter = 0;
foreach (Udbus.Serialization.UdbusMessageReader subreader in reader.ArrayReader(Udbus.Types.dbus_type.DBUS_OBJECTPATH))
{
Udbus.Types.UdbusObjectPath op;
result = subreader.ReadObjectPath(out op);
if (result != 0)
{
Console.WriteLine("Error ! {0:d}/0x{0:x8}", result);
}
else
{
Console.WriteLine(" {0}", op);
using (var msgVm = builder.UdbusMethodMessage(
"com.citrix.xenclient.xenmgr", op.Path,
"com.citrix.xenclient.xenmgr.vm",
"read_icon").Message)
{
result = connector.Send(msgVm);
Console.WriteLine("read_icon send result: {0}", result);
}
if (result == 0)
{
Udbus.Serialization.NMessageStruct.UdbusMessageHandle recvVm;
using (var msgVm = Udbus.Core.UdbusVisitorFunctions.LoopUdbusFind(connector, visitor, Console.Out, stop).Handle)
{
if (msgVm == null)
{
Console.WriteLine("read_icon failed");
}
else
{
msgVm.HandleToStructure(out recvVm);
Console.WriteLine("read_icon result: {0}. msg: {1}", result, recvVm);
Udbus.Serialization.UdbusMessageReader readerVm = new Udbus.Serialization.UdbusMessageReader(msgVm);
Console.WriteLine("Icon bytes:");
uint byteCounter = 0;
foreach (Udbus.Serialization.UdbusMessageReader subreaderIcon in readerVm.ArrayReader(Udbus.Types.dbus_type.DBUS_BYTE))
{
byte b;
result = subreaderIcon.ReadByte(out b);
if (result != 0)
{
Console.WriteLine("Error ! {0:d}/0x{0:x8}", result);
break;
}
else
{
//Console.Write(b);
++byteCounter;
}
}
Console.WriteLine("Total: {0} bytes", byteCounter);
Console.WriteLine();
} // Ends else read_icon succeeded
} // Ends read_icon response
}
}
Console.WriteLine("Entry {0:d2}: {1}", counter++, op);
}
} // Ends using ListVms response
}示例3: TestDbusGetPropertyImpl
static void TestDbusGetPropertyImpl(Udbus.Serialization.UdbusMessageBuilderTracker builder, Udbus.Core.IUdbusMessageVisitor visitor, Udbus.Serialization.UdbusConnector connector,
System.Threading.ManualResetEvent stop, PreNextActionDelegate preNextAction)
{
preNextAction("GetProperty");
int result;
Udbus.Serialization.NMessageStruct.UdbusMessageHandle recv;
using (var msg = builder.UdbusMethodMessage(
"com.citrix.xenclient.xenmgr", "/",
"org.freedesktop.DBus.Properties", "Get").Message)
{
Udbus.Types.dbus_sig signature = Udbus.Types.dbus_sig.Initialiser;
signature.a[0] = Udbus.Types.dbus_type.DBUS_STRING;
signature.a[1] = Udbus.Types.dbus_type.DBUS_STRING;
signature.a[2] = Udbus.Types.dbus_type.DBUS_INVALID;
builder.SetSignature(ref signature)
.BodyAdd(4096)
.BodyAdd_String("com.citrix.xenclient.xenmgr.config")
.BodyAdd_String("iso-path")
;
result = connector.Send(msg);
Console.WriteLine("GetProperty send result: {0}", result);
Udbus.Core.UdbusVisitorFunctions.Visit(result, msg, new Udbus.Core.UdbusMessageVisitorDumpConsole());
}
try
{
Udbus.Core.UdbusMessagePair recvData = Udbus.Core.UdbusVisitorFunctions.LoopUdbusFind(connector, visitor, Console.Out, stop);
if (!recvData.QuEmpty)
{
recv = recvData.Data;
if (recv.typefield.type != Udbus.Types.dbus_msg_type.DBUS_TYPE_ERROR)
{
Udbus.Serialization.UdbusMessageReader reader = new Udbus.Serialization.UdbusMessageReader(recvData.Handle);
do
{
#if !READASVARIANT
var variant = reader.ReadVariantValue(out result);
Console.WriteLine("iso_path: {0}", variant.ToString());
//Udbus.Parsing.BuildContext context = new Udbus.Parsing.BuildContext(new Udbus.Parsing.CodeTypeNoOpHolder());
//Udbus.Serialization.Variant.UdbusVariantIn variantIn = new Udbus.Serialization.Variant.UdbusVariantIn(reader);
//Udbus.Parsing.IDLArgumentTypeNameBuilderBase nameBuilder = new Udbus.Parsing.IDLArgumentTypeNameBuilderNoOp();
//Udbus.Types.dbus_sig sig = Udbus.Types.dbus_sig.Initialiser;
//result = reader.ReadSignature(ref sig);
//Udbus.Parsing.CodeBuilderHelper.BuildCodeParamType(variantIn, nameBuilder, sig.a, context);
//Console.WriteLine("iso_path: {0}", variantIn.Variant.ToString());
#else // !READASVARIANT
Udbus.Types.dbus_sig sig = Udbus.Types.dbus_sig.Initialiser;
result = reader.ReadSignature(ref sig);
if (result != 0)
{
Console.WriteLine("Error reading property variant signature: {0}", result);
break;
}
string isopath;
result = reader.ReadString(out isopath);
if (result != 0)
{
Console.WriteLine("Error reading property variant string: {0}", result);
break;
}
Console.WriteLine("iso_path: {0}", isopath);
#endif // READASVARIANT
} while (false);
}
}
else
{
Console.WriteLine("Getting the property failed. Boooooo ");
}
}
catch (System.Runtime.InteropServices.SEHException seh)
{
Console.WriteLine("Error: " + seh.ToString());
}
}