本文整理汇总了C#中Coordinates.Add方法的典型用法代码示例。如果您正苦于以下问题：C# Coordinates.Add方法的具体用法？C# Coordinates.Add怎么用？C# Coordinates.Add使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类Coordinates的用法示例。
在下文中一共展示了Coordinates.Add方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: writeKML
private void writeKML(string filename)
{
try
{
writeGPX(filename);
}
catch { }
Color[] colours = { Color.Red, Color.Orange, Color.Yellow, Color.Green, Color.Blue, Color.Indigo, Color.Violet, Color.Pink };
AltitudeMode altmode = AltitudeMode.absolute;
if (MainV2.cs.firmware == MainV2.Firmwares.ArduCopter2)
{
altmode = AltitudeMode.relativeToGround; // because of sonar, this is both right and wrong. right for sonar, wrong in terms of gps as the land slopes off.
}
KMLRoot kml = new KMLRoot();
Folder fldr = new Folder("Log");
Style style = new Style();
style.Id = "yellowLineGreenPoly";
style.Add(new LineStyle(HexStringToColor("7f00ffff"), 4));
PolyStyle pstyle = new PolyStyle();
pstyle.Color = HexStringToColor("7f00ff00");
style.Add(pstyle);
kml.Document.AddStyle(style);
int stylecode = 0xff;
int g = -1;
foreach (List<Point3D> poslist in position)
{
g++;
if (poslist == null)
continue;
LineString ls = new LineString();
ls.AltitudeMode = altmode;
ls.Extrude = true;
//ls.Tessellate = true;
Coordinates coords = new Coordinates();
coords.AddRange(poslist);
ls.coordinates = coords;
Placemark pm = new Placemark();
string mode = "";
if (g < modelist.Count)
mode = modelist[g];
pm.name = g + " Flight Path " + mode;
pm.styleUrl = "#yellowLineGreenPoly";
pm.LineString = ls;
stylecode = colours[g % (colours.Length - 1)].ToArgb();
Style style2 = new Style();
Color color = Color.FromArgb(0xff, (stylecode >> 16) & 0xff, (stylecode >> 8) & 0xff, (stylecode >> 0) & 0xff);
log.Info("colour " + color.ToArgb().ToString("X") + " " + color.ToKnownColor().ToString());
style2.Add(new LineStyle(color, 4));
pm.AddStyle(style2);
fldr.Add(pm);
}
Folder planes = new Folder();
planes.name = "Planes";
fldr.Add(planes);
Folder waypoints = new Folder();
waypoints.name = "Waypoints";
fldr.Add(waypoints);
LineString lswp = new LineString();
lswp.AltitudeMode = AltitudeMode.relativeToGround;
lswp.Extrude = true;
Coordinates coordswp = new Coordinates();
foreach (PointLatLngAlt p1 in cmd)
{
coordswp.Add(new Point3D(p1.Lng, p1.Lat, p1.Alt));
}
lswp.coordinates = coordswp;
Placemark pmwp = new Placemark();
pmwp.name = "Waypoints";
//pm.styleUrl = "#yellowLineGreenPoly";
pmwp.LineString = lswp;
waypoints.Add(pmwp);
int a = 0;
//.........这里部分代码省略.........
示例2: writeKML
public void writeKML(string filename)
{
try
{
writeGPX(filename);
writeRinex(filename);
}
catch
{
}
Color[] colours =
{
Color.Red, Color.Orange, Color.Yellow, Color.Green, Color.Blue, Color.Indigo,
Color.Violet, Color.Pink
};
AltitudeMode altmode = AltitudeMode.absolute;
KMLRoot kml = new KMLRoot();
Folder fldr = new Folder("Log");
Style style = new Style();
style.Id = "yellowLineGreenPoly";
style.Add(new LineStyle(HexStringToColor("7f00ffff"), 4));
Style style1 = new Style();
style1.Id = "spray";
style1.Add(new LineStyle(HexStringToColor("4c0000ff"), 0));
style1.Add(new PolyStyle() {Color = HexStringToColor("4c0000ff")});
PolyStyle pstyle = new PolyStyle();
pstyle.Color = HexStringToColor("7f00ff00");
style.Add(pstyle);
kml.Document.AddStyle(style);
kml.Document.AddStyle(style1);
int stylecode = 0xff;
int g = -1;
foreach (List<Point3D> poslist in position)
{
g++;
if (poslist == null)
continue;
/*
List<PointLatLngAlt> pllalist = new List<PointLatLngAlt>();
foreach (var point in poslist)
{
pllalist.Add(new PointLatLngAlt(point.Y, point.X, point.Z, ""));
}
var ans = Utilities.LineOffset.GetPolygon(pllalist, 2);
while (ans.Count > 0)
{
var first = ans[0];
var second = ans[1];
var secondlast = ans[ans.Count - 2];
var last = ans[ans.Count-1];
ans.Remove(first);
ans.Remove(last);
var polycoords = new BoundaryIs();
polycoords.LinearRing = new LinearRing();
polycoords.LinearRing.Coordinates.Add(new Point3D(first.Lng, first.Lat, 1));
polycoords.LinearRing.Coordinates.Add(new Point3D(second.Lng, second.Lat, 1));
polycoords.LinearRing.Coordinates.Add(new Point3D(secondlast.Lng, secondlast.Lat, 1));
polycoords.LinearRing.Coordinates.Add(new Point3D(last.Lng, last.Lat, 1));
polycoords.LinearRing.Coordinates.Add(new Point3D(first.Lng, first.Lat, 1));
//if (!IsClockwise(polycoords.LinearRing.Coordinates))
// polycoords.LinearRing.Coordinates.Reverse();
Polygon kmlpoly = new Polygon() { AltitudeMode = AltitudeMode.relativeToGround, Extrude = false, OuterBoundaryIs = polycoords };
Placemark pmpoly = new Placemark();
pmpoly.Polygon = kmlpoly;
pmpoly.name = g + " test";
pmpoly.styleUrl = "#spray";
fldr.Add(pmpoly);
}
*/
LineString ls = new LineString();
ls.AltitudeMode = altmode;
ls.Extrude = true;
//ls.Tessellate = true;
Coordinates coords = new Coordinates();
coords.AddRange(poslist);
//.........这里部分代码省略.........