本文整理汇总了C#中AABB.Y_Length方法的典型用法代码示例。如果您正苦于以下问题：C# AABB.Y_Length方法的具体用法？C# AABB.Y_Length怎么用？C# AABB.Y_Length使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类AABB的用法示例。
在下文中一共展示了AABB.Y_Length方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C#代码示例。
示例1: Build_FVM13
public void Build_FVM13(ref int xDim, ref int yDim, ref int zDim, bool PML)
{
double rt2 = Math.Sqrt(2);
double rt3 = Math.Sqrt(3);
dx = Rm.Sound_speed(0) / fmax * .1;
Bounds = new AABB(Rm.Min() - new Point(.05 * dx, .05 * dx, .05 * dx), Rm.Max() + new Point(.05 * dx, .05 * dx, .05 * dx));
int no_of_Layers = 0;
double max_Layer = 0;
if (PML)
{
no_of_Layers = 10;
max_Layer = 0.5;
}
double x_length = Bounds.X_Length() + (no_of_Layers * 2 + 1) * dx;
double y_length = Bounds.Y_Length() + (no_of_Layers * 2 + 1) * dx;
double z_length = Bounds.Z_Length() + (no_of_Layers * 2 + 1) * dx;
//estimated distance between nodes
xDim = (int)Math.Ceiling(x_length / dx); //set number of nodes in x direction
dx = x_length / xDim; //refined distance between nodes
yDim = (int)Math.Ceiling(y_length / dx); //set number of nodes in y direction
dy = y_length / yDim;
zDim = (int)Math.Ceiling(z_length / dx); //set number of nodes in z direction
dz = z_length / zDim;
//dt = dx / (Math.Sqrt(1.0 / 3.0) * (Rm.Sound_speed(0))); //set time step small enough to satisfy courrant condition
dt = dx / (Rm.Sound_speed(0)); //set time step small enough to satisfy courrant condition
//dt = dx / (Math.Sqrt(.75) * (Rm.Sound_speed)); //set time step small enough to satisfy courrant condition
dxrt2 = dx * rt2;
dxrt3 = dx * rt3;
Dir = new Vector[13]{
//new Vector(-1,double.Epsilon,double.Epsilon),
//new Vector(double.Epsilon,-1,double.Epsilon),
//new Vector(double.Epsilon,double.Epsilon,-1),
//new Vector(-1/rt2,-1/rt2,double.Epsilon),
//new Vector(1/rt2, -1/rt2,double.Epsilon),
//new Vector(-1/rt2, double.Epsilon, 1/rt2),
//new Vector(double.Epsilon, -1/rt2, 1/rt2),
//new Vector(1/rt2, double.Epsilon, 1/rt2),
//new Vector(double.Epsilon, 1/rt2, 1/rt2),
//new Vector(-1/rt2,-1/rt2,1/rt2),
//new Vector(1/rt2,-1/rt2,1/rt2),
//new Vector(1/rt2,1/rt2,1/rt2),
//new Vector(-1/rt2,1/rt2,1/rt2)
new Vector(-1, 0, 0),
new Vector(0, -1, 0),
new Vector(0, 0, -1),
new Vector(-1/rt2,-1/rt2,double.Epsilon),
new Vector(1/rt2, -1/rt2,double.Epsilon),
new Vector(-1/rt2, double.Epsilon, 1/rt2),
new Vector(double.Epsilon, -1/rt2, 1/rt2),
new Vector(1/rt2, double.Epsilon, 1/rt2),
new Vector(double.Epsilon, 1/rt2, 1/rt2),
new Vector(-dx, -dy/rt2, dz/rt2),
new Vector(dx, -dy/rt2, dz/rt2),
new Vector(dx, dy/rt2, dz/rt2),
new Vector(-dx, dy/rt2, dz/rt2)
};
foreach (Vector V in Dir) V.Normalize();
xDim = (int)Math.Ceiling((double)xDim * rt2 / 2);
PFrame = new Node[xDim][][];// yDim, zDim]; //pressure scalar field initialisation
List<Bound_Node_RDD> Bound = new List<Bound_Node_RDD>();
//dx = dx/rt2;
Point MinPt = Bounds.Min_PT - new Point(dx * no_of_Layers, dy * no_of_Layers, dz * no_of_Layers);
//System.Threading.Tasks.Parallel.For(0, xDim, (x) =>
for (int x = 0; x < PFrame.Length; x++)
{
int mod = x % 2;
PFrame[x] = new Node[(int)(Math.Floor((double)yDim / 2) + yDim % 2 * mod)][];
Random Rnd = new Random(x);
for (int y = 0; y < PFrame[x].Length; y++)
{
PFrame[x][y] = new Node[(int)(Math.Floor((double)zDim / 2) + yDim % 2 * mod)];
for (int z = 0; z < PFrame[x][y].Length; z++)
{
List<double> abs;
List<Bound_Node.Boundary> BDir;
Point Loc = new Point(MinPt.x + 2 * (((double)x - 0.5) * dx / rt2), MinPt.y + 2 * (((double)y + (0.5 - 0.5 * mod)) * dy), MinPt.z + 2 * (((double)z + (0.5 - 0.5 * mod)) * dz));
if (!Intersect_13Pt(Loc, SD.frequency, out BDir, out abs, ref Rnd))
{
PFrame[x][y][z] = new RDD_Node(Loc);//, rho0, dt, dx, Rm.Sound_speed, new int[] { x, y, z });
}
else
//.........这里部分代码省略.........
示例2: Build_Interp
public void Build_Interp(ref int xDim, ref int yDim, ref int zDim)
{
dx = Rm.Sound_speed(0) / fmax * .1;
Bounds = new AABB(Rm.Min() - new Point(.05 * dx, .05 * dx, .05 * dx), Rm.Max() + new Point(.05 * dx, .05 * dx, .05 * dx));
double x_length = Bounds.X_Length();
double y_length = Bounds.Y_Length();
double z_length = Bounds.Z_Length();
//estimated distance between nodes
xDim = (int)Math.Ceiling(x_length / dx); //set number of nodes in x direction
dx = x_length / xDim; //refined distance between nodes
yDim = (int)Math.Ceiling(y_length / dx); //set number of nodes in y direction
double dy = y_length / yDim;
zDim = (int)Math.Ceiling(z_length / dx); //set number of nodes in z direction
double dz = z_length / zDim;
dt = dx / (Math.Sqrt(1.0 / 3.0) * (Rm.Sound_speed(0))); //set time step small enough to satisfy courrant condition
dt = dx / (Rm.Sound_speed(0)); //set time step small enough to satisfy courrant condition
//dt = dx / (Math.Sqrt(.75) * (Rm.Sound_speed)); //set time step small enough to satisfy courrant condition
double rt2 = Math.Sqrt(2);
double rt3 = Math.Sqrt(3);
dxrt2 = dx * rt2;
dxrt3 = dx * rt3;
Dir = new Vector[13]{
new Vector(-1,double.Epsilon,double.Epsilon),
new Vector(double.Epsilon,-1,double.Epsilon),
new Vector(double.Epsilon,double.Epsilon,-1),
new Vector(-1/rt2,-1/rt2,double.Epsilon),
new Vector(1/rt2, -1/rt2,double.Epsilon),
new Vector(-1/rt2, double.Epsilon, 1/rt2),
new Vector(double.Epsilon, -1/rt2, 1/rt2),
new Vector(1/rt2, double.Epsilon, 1/rt2),
new Vector(double.Epsilon, 1/rt2, 1/rt2),
new Vector(-1/rt3,-1/rt3,1/rt3),
new Vector(1/rt3,-1/rt3,1/rt3),
new Vector(1/rt3,1/rt3,1/rt3),
new Vector(-1/rt3,1/rt3,1/rt3)
};
foreach (Vector V in Dir) V.Normalize();
PFrame = new P_Node[xDim][][];// yDim, zDim]; //pressure scalar field initialisation
//System.Threading.Tasks.Parallel.For(0, xDim, (x) =>
for (int x = 0; x < xDim; x++)
{
PFrame[x] = new P_Node[yDim][];
Random Rnd = new Random(x);
for (int y = 0; y < yDim; y++)
{
PFrame[x][y] = new P_Node[zDim];
for (int z = 0; z < zDim; z++)
{
List<double[]> abs;
List<Bound_Node.Boundary> BDir;
Point Loc = new Point(Bounds.Min_PT.x + (((double)x + 0.5) * dx), Bounds.Min_PT.y + (((double)y + 0.5) * dy), Bounds.Min_PT.z + (((double)z + 0.5) * dz));
if (!Intersect_26Pt(Loc, out BDir, out abs, ref Rnd))
{
PFrame[x][y][z] = new P_Node(Loc);//, rho0, dt, dx, Rm.Sound_speed, new int[] { x, y, z });
}
else
{
PFrame[x][y][z] =
new Bound_Node_IWB(Loc, rho0, dt, dx, Rm.Sound_speed(0), new int[] { x, y, z }, abs, BDir);
}
}
}
}//);
bool failed = false;
//Make Mesh Templates:
Build_Mesh_Sections();
for (int x = 0; x < xDim; x++)
//System.Threading.Tasks.Parallel.For(0, xDim, (x) =>
{
for (int y = 0; y < yDim; y++)
{
for (int z = 0; z < zDim; z++)
{
try
{
PFrame[x][y][z].Link_Nodes(ref PFrame, x, y, z);
}
catch
{
//Display faulty voxels in a display conduit here...
UI.CellConduit.Instance.Add(PFrame[x][y][z], x, y, z, dx, Utilities.PachTools.HPttoRPt(Bounds.Min_PT));
failed = true;
}
}
}
}//);
if (failed) return;
//.........这里部分代码省略.........