本文整理汇总了C++中sp::InteractionsGraph类的典型用法代码示例。如果您正苦于以下问题:C++ InteractionsGraph类的具体用法?C++ InteractionsGraph怎么用?C++ InteractionsGraph使用的例子?那么, 这里精选的类代码示例或许可以为您提供帮助。
在下文中一共展示了InteractionsGraph类的15个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: postCompute
void MLCPProjectOnConstraints::postCompute()
{
_hasBeenUpdated = true;
// This function is used to set y/lambda values using output from
// lcp_driver (w,z). Only Interactions (ie Interactions) of
// indexSet(leveMin) are concerned.
// === Get index set from Topology ===
SP::InteractionsGraph indexSet = simulation()->indexSet(indexSetLevel());
// y and lambda vectors
SP::SiconosVector lambda;
SP::SiconosVector y;
// === Loop through "active" Interactions (ie present in
// indexSets[1]) ===
/** We chose to do a small step _alpha in view of stabilized the algorithm.*/
#ifdef MLCPPROJ_DEBUG
printf("MLCPProjectOnConstraints::postCompute damping value = %f\n", _alpha);
#endif
(*_z) *= _alpha;
unsigned int pos = 0;
#ifdef MLCPPROJ_DEBUG
printf("MLCPProjectOnConstraints::postCompute _z\n");
_z->display();
display();
#endif
InteractionsGraph::VIterator ui, uiend;
for (std11::tie(ui, uiend) = indexSet->vertices(); ui != uiend; ++ui)
{
SP::Interaction inter = indexSet->bundle(*ui);
// Get the relative position of inter-interactionBlock in the vector w
// or z
pos = _M->getPositionOfInteractionBlock(*inter);
RELATION::TYPES relationType = inter->relation()->getType();
if (relationType == NewtonEuler)
{
postComputeNewtonEulerR(inter, pos);
}
else if (relationType == Lagrangian)
{
postComputeLagrangianR(inter, pos);
}
else
{
RuntimeException::selfThrow("MLCPProjectOnConstraints::computeInteractionBlock - relation type is not from Lagrangian type neither NewtonEuler.");
}
}
}
示例2: interactions
std::vector<SP::Interaction> interactions(SP::InteractionsGraph dsg)
{
std::vector<SP::Interaction> r = std::vector<SP::Interaction>();
InteractionsGraph::VIterator vi, viend;
for (boost::tie(vi, viend) = dsg->vertices(); vi != viend; ++vi)
{
r.push_back(dsg->bundle(*vi));
};
return r;
};
示例3: updateMu
void FrictionContact::updateMu()
{
_mu->clear();
SP::InteractionsGraph indexSet = simulation()->indexSet(indexSetLevel());
InteractionsGraph::VIterator ui, uiend;
for (std11::tie(ui, uiend) = indexSet->vertices(); ui != uiend; ++ui)
{
_mu->push_back(std11::static_pointer_cast<NewtonImpactFrictionNSL>
(indexSet->bundle(*ui)->nonSmoothLaw())->mu());
}
}
示例4: computeqBlock
void MLCPProjectOnConstraints::computeqBlock(InteractionsGraph::VDescriptor& vertex_inter, unsigned int pos)
{
SP::InteractionsGraph indexSet = simulation()->indexSet(indexSetLevel());
SP::Interaction inter = indexSet->bundle(vertex_inter);
unsigned int sizeY = std11::static_pointer_cast<OSNSMatrixProjectOnConstraints>
(_M)->computeSizeForProjection(inter);
for (unsigned int i = 0; i < sizeY; i++)
_q->setValue(pos + i, inter->y(0)->getValue(0 + i));
#ifdef MLCPPROJ_DEBUG
printf("MLCPProjectOnConstraints::computeqBlock, _q from y(0)\n");
_q->display();
#endif
}
示例5: computeFreeOutput
void SchatzmanPaoliOSI::computeFreeOutput(InteractionsGraph::VDescriptor& vertex_inter, OneStepNSProblem* osnsp)
{
DEBUG_BEGIN("SchatzmanPaoliOSI::computeFreeOutput(InteractionsGraph::VDescriptor& vertex_inter, OneStepNSProblem* osnsp)\n");
/** \warning: ensures that it can also work with two different osi for two different ds ?
*/
SP::InteractionsGraph indexSet = osnsp->simulation()->indexSet(osnsp->indexSetLevel());
SP::Interaction inter = indexSet->bundle(vertex_inter);
SP::OneStepNSProblems allOSNS = _simulation->oneStepNSProblems();
VectorOfBlockVectors& inter_work_block = *indexSet->properties(vertex_inter).workBlockVectors;
// Get relation and non smooth law types
RELATION::TYPES relationType = inter->relation()->getType();
RELATION::SUBTYPES relationSubType = inter->relation()->getSubType();
unsigned int sizeY = inter->nonSmoothLaw()->size();
unsigned int relativePosition = 0;
Index coord(8);
coord[0] = relativePosition;
coord[1] = relativePosition + sizeY;
coord[2] = 0;
coord[4] = 0;
coord[6] = 0;
coord[7] = sizeY;
SP::SiconosMatrix C;
SP::SiconosMatrix D;
SP::SiconosMatrix F;
SP::BlockVector deltax;
SiconosVector& osnsp_rhs = *(*indexSet->properties(vertex_inter).workVectors)[SchatzmanPaoliOSI::OSNSP_RHS];
SP::SiconosVector e;
SP::BlockVector Xfree = inter_work_block[SchatzmanPaoliOSI::xfree];;
assert(Xfree);
SP::Interaction mainInteraction = inter;
assert(mainInteraction);
assert(mainInteraction->relation());
DEBUG_EXPR(inter->display(););
示例6: updateSizeAndPositions
unsigned OSNSMatrix::updateSizeAndPositions(SP::InteractionsGraph indexSet)
{
// === Description ===
// For an interactionBlock (diagonal or extra diagonal) corresponding to
// an Interaction, we need to know the position of its first
// element in the full-matrix M. This position depends on the
// previous interactionBlocks sizes.
//
// Note FP: at the time positions are saved in the Interaction
// but this is wrong (I think) since it prevents the inter
// to be present in several different osns.
//
// Computes real size of the current matrix = sum of the dim. of all
// Interactionin indexSet
unsigned dim = 0;
InteractionsGraph::VIterator vd, vdend;
for (std11::tie(vd, vdend) = indexSet->vertices(); vd != vdend; ++vd)
{
assert(indexSet->descriptor(indexSet->bundle(*vd)) == *vd);
indexSet->bundle(*vd)->setAbsolutePosition(dim);
dim += (indexSet->bundle(*vd)->nonSmoothLaw()->size());
assert(indexSet->bundle(*vd)->absolutePosition() < dim);
}
return dim;
}
示例7: initialize
void FrictionContact::initialize(SP::Simulation sim)
{
// - Checks memory allocation for main variables (M,q,w,z)
// - Formalizes the problem if the topology is time-invariant
// This function performs all steps that are time-invariant
// General initialize for OneStepNSProblem
LinearOSNS::initialize(sim);
// Connect to the right function according to dim. of the problem
// get topology
SP::Topology topology =
simulation()->model()->nonSmoothDynamicalSystem()->topology();
// Note that interactionBlocks is up to date since updateInteractionBlocks
// has been called during OneStepNSProblem::initialize()
// Fill vector of friction coefficients
int sizeMu = simulation()->model()->nonSmoothDynamicalSystem()
->topology()->indexSet(0)->size();
_mu->reserve(sizeMu);
// If the topology is TimeInvariant ie if M structure does not
// change during simulation:
if (topology->indexSet0()->size()>0)
{
// Get index set from Simulation
SP::InteractionsGraph indexSet =
simulation()->indexSet(indexSetLevel());
InteractionsGraph::VIterator ui, uiend;
for (std11::tie(ui, uiend) = indexSet->vertices(); ui != uiend; ++ui)
{
_mu->push_back(std11::static_pointer_cast<NewtonImpactFrictionNSL>
(indexSet->bundle(*ui)->nonSmoothLaw())->mu());
}
}
}
示例8: CompressedRowMat
// Basic constructor
BlockCSRMatrix::BlockCSRMatrix(SP::InteractionsGraph indexSet):
_nr(indexSet->size()),
_blockCSR(new CompressedRowMat(_nr, _nr)),
_sparseBlockStructuredMatrix(new SparseBlockStructuredMatrix()),
_diagsize0(new IndexInt(_nr)),
_diagsize1(new IndexInt(_nr)),
rowPos(new IndexInt(_nr)),
colPos(new IndexInt(_nr))
{
DEBUG_BEGIN("BlockCSRMatrix::BlockCSRMatrix(SP::InteractionsGraph indexSet)\n");
fill(indexSet);
DEBUG_END("BlockCSRMatrix::BlockCSRMatrix(SP::InteractionsGraph indexSet)\n");
}
示例9: updateInteractionBlocks
void OneStepNSProblem::updateInteractionBlocks()
{
DEBUG_PRINT("OneStepNSProblem::updateInteractionBlocks() starts\n");
// The present functions checks various conditions and possibly
// compute interactionBlocks matrices.
//
// Let interi and interj be two Interactions.
//
// Things to be checked are:
// 1 - is the topology time invariant?
// 2 - does interactionBlocks[interi][interj] already exists (ie has been
// computed in a previous time step)?
// 3 - do we need to compute this interactionBlock? A interactionBlock is
// to be computed if interi and interj are in IndexSet1 AND if interi and
// interj have common DynamicalSystems.
//
// The possible cases are:
//
// - If 1 and 2 are true then it does nothing. 3 is not checked.
// - If 1 == true, 2 == false, 3 == false, it does nothing.
// - If 1 == true, 2 == false, 3 == true, it computes the
// interactionBlock.
// - If 1==false, 2 is not checked, and the interactionBlock is
// computed if 3==true.
//
// Get index set from Simulation
SP::InteractionsGraph indexSet = simulation()->indexSet(indexSetLevel());
bool isLinear = simulation()->model()->nonSmoothDynamicalSystem()->isLinear();
// we put diagonal informations on vertices
// self loops with bgl are a *nightmare* at the moment
// (patch 65198 on standard boost install)
if (indexSet->properties().symmetric)
{
DEBUG_PRINT("OneStepNSProblem::updateInteractionBlocks(). Symmetric case");
InteractionsGraph::VIterator vi, viend;
for (std11::tie(vi, viend) = indexSet->vertices();
vi != viend; ++vi)
{
SP::Interaction inter = indexSet->bundle(*vi);
unsigned int nslawSize = inter->nonSmoothLaw()->size();
if (! indexSet->properties(*vi).block)
{
indexSet->properties(*vi).block.reset(new SimpleMatrix(nslawSize, nslawSize));
}
if (!isLinear || !_hasBeenUpdated)
{
computeDiagonalInteractionBlock(*vi);
}
}
/* interactionBlock must be zeroed at init */
std::vector<bool> initialized;
initialized.resize(indexSet->edges_number());
std::fill(initialized.begin(), initialized.end(), false);
InteractionsGraph::EIterator ei, eiend;
for (std11::tie(ei, eiend) = indexSet->edges();
ei != eiend; ++ei)
{
SP::Interaction inter1 = indexSet->bundle(indexSet->source(*ei));
SP::Interaction inter2 = indexSet->bundle(indexSet->target(*ei));
/* on adjoint graph there is at most 2 edges between source and target */
InteractionsGraph::EDescriptor ed1, ed2;
std11::tie(ed1, ed2) = indexSet->edges(indexSet->source(*ei), indexSet->target(*ei));
assert(*ei == ed1 || *ei == ed2);
/* the first edge has the lower index */
assert(indexSet->index(ed1) <= indexSet->index(ed2));
// Memory allocation if needed
unsigned int nslawSize1 = inter1->nonSmoothLaw()->size();
unsigned int nslawSize2 = inter2->nonSmoothLaw()->size();
unsigned int isrc = indexSet->index(indexSet->source(*ei));
unsigned int itar = indexSet->index(indexSet->target(*ei));
SP::SiconosMatrix currentInteractionBlock;
if (itar > isrc) // upper block
{
if (! indexSet->properties(ed1).upper_block)
{
indexSet->properties(ed1).upper_block.reset(new SimpleMatrix(nslawSize1, nslawSize2));
if (ed2 != ed1)
indexSet->properties(ed2).upper_block = indexSet->properties(ed1).upper_block;
}
currentInteractionBlock = indexSet->properties(ed1).upper_block;
}
else // lower block
{
if (! indexSet->properties(ed1).lower_block)
{
indexSet->properties(ed1).lower_block.reset(new SimpleMatrix(nslawSize1, nslawSize2));
if (ed2 != ed1)
//.........这里部分代码省略.........
示例10: computeDiagonalInteractionBlock
void LinearOSNS::computeDiagonalInteractionBlock(const InteractionsGraph::VDescriptor& vd)
{
DEBUG_BEGIN("LinearOSNS::computeDiagonalInteractionBlock(const InteractionsGraph::VDescriptor& vd)\n");
// Computes matrix _interactionBlocks[inter1][inter1] (and allocates memory if
// necessary) one or two DS are concerned by inter1 . How
// _interactionBlocks are computed depends explicitely on the type of
// Relation of each Interaction.
// Warning: we suppose that at this point, all non linear
// operators (G for lagrangian relation for example) have been
// computed through plug-in mechanism.
// Get dimension of the NonSmoothLaw (ie dim of the interactionBlock)
SP::InteractionsGraph indexSet = simulation()->indexSet(indexSetLevel());
SP::Interaction inter = indexSet->bundle(vd);
// Get osi property from interaction
// We assume that all ds in vertex_inter have the same osi.
SP::OneStepIntegrator Osi = indexSet->properties(vd).osi;
//SP::OneStepIntegrator Osi = simulation()->integratorOfDS(ds);
OSI::TYPES osiType = Osi->getType();
// At most 2 DS are linked by an Interaction
SP::DynamicalSystem DS1;
SP::DynamicalSystem DS2;
unsigned int pos1, pos2;
// --- Get the dynamical system(s) (edge(s)) connected to the current interaction (vertex) ---
if (indexSet->properties(vd).source != indexSet->properties(vd).target)
{
DEBUG_PRINT("a two DS Interaction\n");
DS1 = indexSet->properties(vd).source;
DS2 = indexSet->properties(vd).target;
}
else
{
DEBUG_PRINT("a single DS Interaction\n");
DS1 = indexSet->properties(vd).source;
DS2 = DS1;
// \warning this looks like some debug code, but it gets executed even with NDEBUG.
// may be compiler does something smarter, but still it should be rewritten. --xhub
InteractionsGraph::OEIterator oei, oeiend;
for (std11::tie(oei, oeiend) = indexSet->out_edges(vd);
oei != oeiend; ++oei)
{
// note : at most 4 edges
DS2 = indexSet->bundle(*oei);
if (DS2 != DS1)
{
assert(false);
break;
}
}
}
assert(DS1);
assert(DS2);
pos1 = indexSet->properties(vd).source_pos;
pos2 = indexSet->properties(vd).target_pos;
// --- Check block size ---
assert(indexSet->properties(vd).block->size(0) == inter->nonSmoothLaw()->size());
assert(indexSet->properties(vd).block->size(1) == inter->nonSmoothLaw()->size());
// --- Compute diagonal block ---
// Block to be set in OSNS Matrix, corresponding to
// the current interaction
SP::SiconosMatrix currentInteractionBlock = indexSet->properties(vd).block;
SP::SiconosMatrix leftInteractionBlock, rightInteractionBlock;
RELATION::TYPES relationType;
double h = simulation()->currentTimeStep();
// General form of the interactionBlock is : interactionBlock =
// a*extraInteractionBlock + b * leftInteractionBlock * centralInteractionBlocks
// * rightInteractionBlock a and b are scalars, centralInteractionBlocks a
// matrix depending on the integrator (and on the DS), the
// simulation type ... left, right and extra depend on the relation
// type and the non smooth law.
relationType = inter->relation()->getType();
VectorOfSMatrices& workMInter = *indexSet->properties(vd).workMatrices;
inter->getExtraInteractionBlock(currentInteractionBlock, workMInter);
unsigned int nslawSize = inter->nonSmoothLaw()->size();
// loop over the DS connected to the interaction.
bool endl = false;
unsigned int pos = pos1;
for (SP::DynamicalSystem ds = DS1; !endl; ds = DS2)
{
assert(ds == DS1 || ds == DS2);
endl = (ds == DS2);
unsigned int sizeDS = ds->dimension();
// get _interactionBlocks corresponding to the current DS
// These _interactionBlocks depends on the relation type.
leftInteractionBlock.reset(new SimpleMatrix(nslawSize, sizeDS));
inter->getLeftInteractionBlockForDS(pos, leftInteractionBlock, workMInter);
DEBUG_EXPR(leftInteractionBlock->display(););
// Computing depends on relation type -> move this in Interaction method?
if (relationType == FirstOrder)
{
//.........这里部分代码省略.........
示例11: numberOfInvolvedDS
unsigned int Topology::numberOfInvolvedDS(unsigned int inumber)
{
if (inumber >= _IG.size())
{
RuntimeException::selfThrow("index number must be inferior to the number of indexSets");
}
/* on an adjoint graph a dynamical system may be on several edges */
std::map<SP::DynamicalSystem, bool> flag;
unsigned int return_value = 0;
SP::InteractionsGraph indexSet = _IG[inumber];
InteractionsGraph::VIterator vi, viend;
for(std11::tie(vi, viend) = indexSet->vertices();
vi != viend; ++vi)
{
if(indexSet->properties(*vi).source)
{
if (flag.find(indexSet->properties(*vi).source) == flag.end())
{
flag[indexSet->properties(*vi).source] = true;
return_value++;
}
}
if(indexSet->properties(*vi).target)
{
if (flag.find(indexSet->properties(*vi).target) == flag.end())
{
flag[indexSet->properties(*vi).target] = true;
return_value++;
}
}
}
InteractionsGraph::EIterator ei, eiend;
for(std11::tie(ei, eiend) = indexSet->edges();
ei != eiend; ++ei)
{
if (flag.find(indexSet->bundle(*ei)) == flag.end())
{
flag[indexSet->bundle(*ei)] = true;
return_value++;
}
}
return return_value;
}
示例12: computeFreeOutput
void LsodarOSI::computeFreeOutput(InteractionsGraph::VDescriptor& vertex_inter, OneStepNSProblem* osnsp)
{
SP::OneStepNSProblems allOSNS = simulationLink->oneStepNSProblems();
SP::InteractionsGraph indexSet = osnsp->simulation()->indexSet(osnsp->indexSetLevel());
SP::Interaction inter = indexSet->bundle(vertex_inter);
VectorOfBlockVectors& DSlink = *indexSet->properties(vertex_inter).DSlink;
// Get relation and non smooth law types
RELATION::TYPES relationType = inter->relation()->getType();
RELATION::SUBTYPES relationSubType = inter->relation()->getSubType();
unsigned int sizeY = inter->nonSmoothLaw()->size();
unsigned int relativePosition = 0;
SP::Interaction mainInteraction = inter;
Index coord(8);
coord[0] = relativePosition;
coord[1] = relativePosition + sizeY;
coord[2] = 0;
coord[4] = 0;
coord[6] = 0;
coord[7] = sizeY;
SP::SiconosMatrix C;
// SP::SiconosMatrix D;
// SP::SiconosMatrix F;
SiconosVector& yForNSsolver = *inter->yForNSsolver();
SP::BlockVector Xfree;
// All of these values should be stored in the node corrseponding to the Interactionwhen a MoreauJeanOSI scheme is used.
/* V.A. 10/10/2010
* Following the type of OSNS we need to retrieve the velocity or the acceleration
* This tricks is not very nice but for the moment the OSNS do not known if
* it is in accelaration of not
*/
//SP::OneStepNSProblems allOSNS = _simulation->oneStepNSProblems();
if (((*allOSNS)[SICONOS_OSNSP_ED_SMOOTH_ACC]).get() == osnsp)
{
if (relationType == Lagrangian)
{
Xfree = DSlink[LagrangianR::xfree];
}
// else if (relationType == NewtonEuler)
// {
// Xfree = inter->data(NewtonEulerR::free);
// }
assert(Xfree);
// std::cout << "Computeqblock Xfree (Gamma)========" << std::endl;
// Xfree->display();
}
else if (((*allOSNS)[SICONOS_OSNSP_ED_IMPACT]).get() == osnsp)
{
Xfree = DSlink[LagrangianR::q1];
// std::cout << "Computeqblock Xfree (Velocity)========" << std::endl;
// Xfree->display();
}
else
RuntimeException::selfThrow(" computeqBlock for Event Event-driven is wrong ");
if (relationType == Lagrangian)
{
C = mainInteraction->relation()->C();
if (C)
{
assert(Xfree);
coord[3] = C->size(1);
coord[5] = C->size(1);
subprod(*C, *Xfree, yForNSsolver, coord, true);
}
SP::SiconosMatrix ID(new SimpleMatrix(sizeY, sizeY));
ID->eye();
Index xcoord(8);
xcoord[0] = 0;
xcoord[1] = sizeY;
xcoord[2] = 0;
xcoord[3] = sizeY;
xcoord[4] = 0;
xcoord[5] = sizeY;
xcoord[6] = 0;
xcoord[7] = sizeY;
// For the relation of type LagrangianRheonomousR
if (relationSubType == RheonomousR)
{
if (((*allOSNS)[SICONOS_OSNSP_ED_SMOOTH_ACC]).get() == osnsp)
{
RuntimeException::selfThrow("LsodarOSI::computeFreeOutput not yet implemented for LCP at acceleration level with LagrangianRheonomousR");
}
else if (((*allOSNS)[SICONOS_OSNSP_TS_VELOCITY]).get() == osnsp)
{
SiconosVector q = *DSlink[LagrangianR::q0];
SiconosVector z = *DSlink[LagrangianR::z];
std11::static_pointer_cast<LagrangianRheonomousR>(inter->relation())->computehDot(simulation()->getTkp1(), q, z);
*DSlink[LagrangianR::z] = z;
//.........这里部分代码省略.........
示例13: displayBlocks
void MLCPProjectOnConstraints::displayBlocks(SP::InteractionsGraph indexSet)
{
std::cout << "MLCPProjectOnConstraints::displayBlocks(SP::InteractionsGraph indexSet) " << std::endl;
std::cout << " indexSet :" << indexSet << std::endl;
InteractionsGraph::VIterator vi, viend;
for (std11::tie(vi, viend) = indexSet->vertices();
vi != viend; ++vi)
{
SP::Interaction inter = indexSet->bundle(*vi);
std::cout << " vertex :" << *vi << std::endl;
std::cout << " bundle :" << indexSet->bundle(*vi) << std::endl;
if (indexSet->blockProj[*vi])
{
std::cout << " blockProj ";
indexSet->blockProj[*vi]->display();
}
InteractionsGraph::OEIterator oei, oeiend;
for (std11::tie(oei, oeiend) = indexSet->out_edges(*vi);
oei != oeiend; ++oei)
{
unsigned int isrc = indexSet->index(indexSet->source(*oei));
unsigned int itar = indexSet->index(indexSet->target(*oei));
std::cout << " isrc :" << isrc << std::endl;
std::cout << " itar :" << itar << std::endl;
InteractionsGraph::EDescriptor ed1, ed2;
std::cout << " outedges :" << *oei << std::endl;
std11::tie(ed1, ed2) = indexSet->edges(indexSet->source(*oei), indexSet->target(*oei));
std::cout << " edges(ed1,ed2) :" << ed1 << " " << ed2 << std::endl;
std::cout << " (ed1)->upper_blockProj : ";
if (indexSet->upper_blockProj[ed1])
{
std::cout << indexSet->upper_blockProj[ed1] << " :" ;
indexSet->upper_blockProj[ed1]->display();
}
else
std::cout << "NULL " << std::endl;
std::cout << " (ed1)->lower_blockProj : ";
if (indexSet->lower_blockProj[ed1])
{
std::cout << indexSet->lower_blockProj[ed1] << " :" ;
indexSet->lower_blockProj[ed1]->display();
}
else
std::cout << "NULL " << std::endl;
std::cout << " (ed2)->upper_blockProj : ";
if (indexSet->upper_blockProj[ed2])
{
std::cout << indexSet->upper_blockProj[ed2] << " :" ;
indexSet->upper_blockProj[ed2]->display();
}
else
std::cout << "NULL" << std::endl;
std::cout << " (ed2)->lower_blockProj : ";
if (indexSet->lower_blockProj[ed2])
{
std::cout << indexSet->lower_blockProj[ed2] << " :" ;
indexSet->lower_blockProj[ed2]->display();
}
else
std::cout << "NULL" << std::endl;
}
}
}
示例14: fill
// Fill the matrix
void OSNSMatrix::fill(SP::InteractionsGraph indexSet, bool update)
{
DEBUG_BEGIN("void OSNSMatrix::fill(SP::InteractionsGraph indexSet, bool update)\n");
assert(indexSet);
if (update)
{
// Computes _dimRow and interactionBlocksPositions according to indexSet
_dimColumn = updateSizeAndPositions(indexSet);
_dimRow = _dimColumn;
}
if (_storageType == NM_DENSE)
{
// === Memory allocation, if required ===
// Mem. is allocate only if !M or if its size has changed.
if (update)
{
if (! _M1)
_M1.reset(new SimpleMatrix(_dimRow, _dimColumn));
else
{
if (_M1->size(0) != _dimRow || _M1->size(1) != _dimColumn)
_M1->resize(_dimRow, _dimColumn);
_M1->zero();
}
}
// ======> Aim: find inter1 and inter2 both in indexSet and which have
// common DynamicalSystems. Then get the corresponding matrix
// from map interactionBlocks, and copy it into M
unsigned int pos = 0, col = 0; // index position used for
// interactionBlock copy into M, see
// below.
// === Loop through "active" Interactions (ie present in
// indexSets[level]) ===
InteractionsGraph::VIterator vi, viend;
for (std11::tie(vi, viend) = indexSet->vertices();
vi != viend; ++vi)
{
SP::Interaction inter = indexSet->bundle(*vi);
pos = inter->absolutePosition();
std11::static_pointer_cast<SimpleMatrix>(_M1)
->setBlock(pos, pos, *indexSet->properties(*vi).block);
DEBUG_PRINTF("OSNSMatrix _M1: %i %i\n", _M1->size(0), _M1->size(1));
DEBUG_PRINTF("OSNSMatrix block: %i %i\n", indexSet->properties(*vi).block->size(0), indexSet->properties(*vi).block->size(1));
}
InteractionsGraph::EIterator ei, eiend;
for (std11::tie(ei, eiend) = indexSet->edges();
ei != eiend; ++ei)
{
InteractionsGraph::VDescriptor vd1 = indexSet->source(*ei);
InteractionsGraph::VDescriptor vd2 = indexSet->target(*ei);
SP::Interaction inter1 = indexSet->bundle(vd1);
SP::Interaction inter2 = indexSet->bundle(vd2);
pos = inter1->absolutePosition();
assert(indexSet->is_vertex(inter2));
col = inter2->absolutePosition();
assert(pos < _dimRow);
assert(col < _dimColumn);
DEBUG_PRINTF("OSNSMatrix _M1: %i %i\n", _M1->size(0), _M1->size(1));
DEBUG_PRINTF("OSNSMatrix upper: %i %i\n", indexSet->properties(*ei).upper_block->size(0), indexSet->properties(*ei).upper_block->size(1));
DEBUG_PRINTF("OSNSMatrix lower: %i %i\n", indexSet->properties(*ei).lower_block->size(0), indexSet->properties(*ei).lower_block->size(1));
assert(indexSet->properties(*ei).lower_block);
assert(indexSet->properties(*ei).upper_block);
std11::static_pointer_cast<SimpleMatrix>(_M1)
->setBlock(std::min(pos, col), std::max(pos, col),
*indexSet->properties(*ei).upper_block);
std11::static_pointer_cast<SimpleMatrix>(_M1)
->setBlock(std::max(pos, col), std::min(pos, col),
*indexSet->properties(*ei).lower_block);
}
}
else if (_storageType == NM_SPARSE_BLOCK)
{
if (! _M2)
{
DEBUG_PRINT("Reset _M2 shared pointer using new BlockCSRMatrix(indexSet) \n ");
_M2.reset(new BlockCSRMatrix(indexSet));
}
else
{
DEBUG_PRINT("fill existing _M2\n");
_M2->fill(indexSet);
//.........这里部分代码省略.........
示例15: postComputeLagrangianR
void MLCPProjectOnConstraints::postComputeLagrangianR(SP::Interaction inter, unsigned int pos)
{
SP::LagrangianR lr = std11::static_pointer_cast<LagrangianR>(inter->relation());
#ifdef MLCPPROJ_DEBUG
printf("MLCPProjectOnConstraints::postComputeLagrangian inter->y(0)\n");
inter->y(0)->display();
printf("MLCPProjectOnConstraints::postComputeLagrangian lr->jachq \n");
lr->jachq()->display();
printf("MLCPProjectOnConstraints::postComputeLagrangianR q before update\n");
SP::InteractionsGraph indexSet = simulation()->indexSet(indexSetLevel());
InteractionsGraph::VDescriptor ui = indexSet->descriptor(inter);
InteractionsGraph::OEIterator oei, oeiend;
for(std11::tie(oei, oeiend) = indexSet->out_edges(ui);
oei != oeiend; ++oei)
{
SP::LagrangianDS lds = std11::static_pointer_cast<LagrangianDS>(indexSet->bundle(*oei));
lds->q()->display();
}
#endif
//unsigned int sizeY = inter->nonSmoothLaw()->size();
// y and lambda vectors
SP::SiconosVector lambda = inter->lambda(0);
SP::SiconosVector y = inter->y(0);
unsigned int sizeY = std11::static_pointer_cast<OSNSMatrixProjectOnConstraints>
(_M)->computeSizeForProjection(inter);
// Copy _w/_z values, starting from index pos into y/lambda.
//setBlock(*_w, y, sizeY, pos, 0);
setBlock(*_z, lambda, sizeY, pos, 0);
#ifdef MLCPPROJ_DEBUG
printf("MLCPP lambda of Interaction is pos =%i :\n", pos);
// aBuff->display();
lambda->display();
unsigned int nslawsize = inter->nonSmoothLaw()->size();
SP::SiconosVector aBuff(new SiconosVector(nslawsize));
setBlock(*_z, aBuff, sizeY, pos, 0);
SP::SiconosMatrix J = lr->jachq();
SP::SimpleMatrix aux(new SimpleMatrix(*J));
aux->trans();
// SP::SiconosVector tmp(new SiconosVector(*(lr->q())));
// prod(*aux, *aBuff, *(tmp), false);
// //prod(*aux,*lambda,*(lr->q()),false);
// std:: std::cout << " tmp = tmp + J^T * lambda" << std::endl;
// tmp->display();
#endif
// // WARNING : Must not be done here. and should be called with the correct time.
// // compute p(0)
// inter->computeInput(0.0 ,0);
// // \warning aBuff should normally be in lambda[0]
// // The update of the position in DS should be made
// // in MoreauJeanOSI::upateState or ProjectedMoreauJeanOSI::updateState
// SP::SiconosMatrix J=lr->jachq();
// SP::SimpleMatrix aux(new SimpleMatrix(*J));
// aux->trans();
// SP::SiconosVector tmp (new SiconosVector(*(lr->q())));
// std:: std::cout << " tmp ="<<std::endl;
// tmp->display();
// std:: std::cout << " lr->q() ="<<std::endl;
// lr->q()->display();
// //prod(*aux,*lambda,*(lr->q()),false);
// prod(*aux,*aBuff,*(tmp),false);
// std:: std::cout << " tmp = tmp + J * lambda"<<std::endl;
// tmp->display();
// // The following step should be done on MoreauJeanOSI::upateState or ProjectedMoreauJeanOSI::updateState
// DSIterator itDS = inter->dynamicalSystemsBegin();
// while(itDS!=inter->dynamicalSystemsEnd())
// {
// Type::Siconos dsType = Type::value(**itDS);
// if((dsType !=Type::LagrangianDS) and
// (dsType !=Type::LagrangianLinearTIDS) )
// {
// RuntimeException::selfThrow("MLCPProjectOnConstraint::postCompute- ds is not of Lagrangian DS type.");
// }
// SP::LagrangianDS d = std11::static_pointer_cast<LagrangianDS> (*itDS);
// SP::SiconosVector q = d->q();
// *q += *d->p(0);
// std::cout << " q=" << std::endl;
// q->display();
// itDS++;
// }
// if ((*lr->q() - *tmp).normInf() > 1e-12)
//.........这里部分代码省略.........