本文整理汇总了C++中machinebasicblock::iterator::isKill方法的典型用法代码示例。如果您正苦于以下问题：C++ iterator::isKill方法的具体用法？C++ iterator::isKill怎么用？C++ iterator::isKill使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类machinebasicblock::iterator的用法示例。
在下文中一共展示了iterator::isKill方法的4个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: delayHasHazard
bool Filler::delayHasHazard(MachineBasicBlock::iterator candidate,
bool &sawLoad,
bool &sawStore,
SmallSet<unsigned, 32> &RegDefs,
SmallSet<unsigned, 32> &RegUses)
{
if (candidate->isImplicitDef() || candidate->isKill())
return true;
if (candidate->mayLoad()) {
sawLoad = true;
if (sawStore)
return true;
}
if (candidate->mayStore()) {
if (sawStore)
return true;
sawStore = true;
if (sawLoad)
return true;
}
for (unsigned i = 0, e = candidate->getNumOperands(); i!= e; ++i) {
const MachineOperand &MO = candidate->getOperand(i);
if (!MO.isReg())
continue; // skip
unsigned Reg = MO.getReg();
if (MO.isDef()) {
// check whether Reg is defined or used before delay slot.
if (IsRegInSet(RegDefs, Reg) || IsRegInSet(RegUses, Reg))
return true;
}
if (MO.isUse()) {
// check whether Reg is defined before delay slot.
if (IsRegInSet(RegDefs, Reg))
return true;
}
}
unsigned Opcode = candidate->getOpcode();
// LD and LDD may have NOPs inserted afterwards in the case of some LEON
// processors, so we can't use the delay slot if this feature is switched-on.
if (Subtarget->insertNOPLoad()
&&
Opcode >= SP::LDDArr && Opcode <= SP::LDrr)
return true;
// Same as above for FDIV and FSQRT on some LEON processors.
if (Subtarget->fixAllFDIVSQRT()
&&
Opcode >= SP::FDIVD && Opcode <= SP::FSQRTD)
return true;
return false;
}示例2: delayHasHazard
bool Filler::delayHasHazard(MachineBasicBlock::iterator candidate,
bool &sawLoad,
bool &sawStore,
SmallSet<unsigned, 32> &RegDefs,
SmallSet<unsigned, 32> &RegUses) {
if (candidate->isImplicitDef() || candidate->isKill())
return true;
// Loads or stores cannot be moved past a store to the delay slot
// and stores cannot be moved past a load.
if (candidate->mayLoad()) {
if (sawStore)
return true;
sawLoad = true;
}
if (candidate->mayStore()) {
if (sawStore)
return true;
sawStore = true;
if (sawLoad)
return true;
}
assert((!candidate->isCall() && !candidate->isReturn()) &&
"Cannot put calls or returns in delay slot.");
for (unsigned i = 0, e = candidate->getNumOperands(); i!= e; ++i) {
const MachineOperand &MO = candidate->getOperand(i);
unsigned Reg;
if (!MO.isReg() || !(Reg = MO.getReg()))
continue; // skip
if (MO.isDef()) {
// check whether Reg is defined or used before delay slot.
if (IsRegInSet(RegDefs, Reg) || IsRegInSet(RegUses, Reg))
return true;
}
if (MO.isUse()) {
// check whether Reg is defined before delay slot.
if (IsRegInSet(RegDefs, Reg))
return true;
}
}
return false;
}示例3: delayHasHazard
bool Filler::delayHasHazard(MachineBasicBlock::iterator candidate,
bool &sawLoad,
bool &sawStore,
SmallSet<unsigned, 32> &RegDefs,
SmallSet<unsigned, 32> &RegUses)
{
if (candidate->isImplicitDef() || candidate->isKill())
return true;
if (candidate->mayLoad()) {
sawLoad = true;
if (sawStore)
return true;
}
if (candidate->mayStore()) {
if (sawStore)
return true;
sawStore = true;
if (sawLoad)
return true;
}
for (unsigned i = 0, e = candidate->getNumOperands(); i!= e; ++i) {
const MachineOperand &MO = candidate->getOperand(i);
if (!MO.isReg())
continue; // skip
unsigned Reg = MO.getReg();
if (MO.isDef()) {
//check whether Reg is defined or used before delay slot.
if (IsRegInSet(RegDefs, Reg) || IsRegInSet(RegUses, Reg))
return true;
}
if (MO.isUse()) {
//check whether Reg is defined before delay slot.
if (IsRegInSet(RegDefs, Reg))
return true;
}
}
return false;
}示例4: Packetizer
bool
MSPUPacketizer::runOnMachineFunction(MachineFunction &Fn)
{
const TargetInstrInfo *TII = Fn.getTarget().getInstrInfo();
MachineLoopInfo &MLI = getAnalysis<MachineLoopInfo>();
MachineDominatorTree &MDT = getAnalysis<MachineDominatorTree>();
// Instantiate the packetizer.
MSPUPacketizerList Packetizer(Fn, MLI, MDT);
// DFA state table should not be empty.
assert(Packetizer.getResourceTracker() && "Empty DFA table!");
//
// Loop over all basic blocks and remove KILL pseudo-instructions
// These instructions confuse the dependence analysis. Consider:
// D0 = ... (Insn 0)
// R0 = KILL R0, D0 (Insn 1)
// R0 = ... (Insn 2)
// Here, Insn 1 will result in the dependence graph not emitting an output
// dependence between Insn 0 and Insn 2. This can lead to incorrect
// packetization
//
for(MachineFunction::iterator MBB = Fn.begin(), MBBe = Fn.end();
MBB != MBBe; ++MBB) {
MachineBasicBlock::iterator End = MBB->end();
MachineBasicBlock::iterator MI = MBB->begin();
while(MI != End) {
if(MI->isKill()) {
MachineBasicBlock::iterator DeleteMI = MI;
++MI;
MBB->erase(DeleteMI);
End = MBB->end();
continue;
}
++MI;
}
}
// Loop over all of the basic blocks.
for(MachineFunction::iterator MBB = Fn.begin(), MBBe = Fn.end();
MBB != MBBe; ++MBB) {
// Find scheduling regions and schedule / packetize each region.
unsigned RemainingCount = MBB->size();
for(MachineBasicBlock::iterator RegionEnd = MBB->end();
RegionEnd != MBB->begin();) {
// The next region starts above the previous region. Look backward in the
// instruction stream until we find the nearest boundary.
MachineBasicBlock::iterator I = RegionEnd;
for(; I != MBB->begin(); --I, --RemainingCount) {
if(TII->isSchedulingBoundary(llvm::prior(I), MBB, Fn))
break;
}
I = MBB->begin();
// Skip empty scheduling regions.
if(I == RegionEnd) {
RegionEnd = llvm::prior(RegionEnd);
--RemainingCount;
continue;
}
// Skip regions with one instruction.
if(I == llvm::prior(RegionEnd)) {
RegionEnd = llvm::prior(RegionEnd);
continue;
}
// PacketizeMIs() does a VLIW scheduling on MachineInstr list and packetizing.
Packetizer.PacketizeMIs(MBB, I, RegionEnd);
RegionEnd = I;
}
}
return true;
}