C++ Server::setConfigDefault方法代码示例

//.........这里部分代码省略.........
  // Connect to the robot
  conn = new ArRobotConnector(argparser, robot); // warning never freed
  if (!conn->connectRobot()) {
    ROS_ERROR("RosAria: ARIA could not connect to robot! (Check ~port parameter is correct, and permissions on port device.)");
    return 1;
  }

  // causes ARIA to load various robot-specific hardware parameters from the robot parameter file in /usr/local/Aria/params
  if(!Aria::parseArgs())
  {
    ROS_ERROR("RosAria: ARIA error parsing ARIA startup parameters!");
    return 1;
  }

  readParameters();

  // Start dynamic_reconfigure server
  dynamic_reconfigure_server = new dynamic_reconfigure::Server<rosaria::RosAriaConfig>;
  

  /*
   * 横向速度和纵向速度单位为米
*/

  /*
   * 初始化参数的最小值 其中TickMM=10 DriftFactor=-200 Revount=-32760
   */

  // Setup Parameter Minimums
  rosaria::RosAriaConfig dynConf_min;
  dynConf_min.trans_accel = robot->getAbsoluteMaxTransAccel() / 1000;
  dynConf_min.trans_decel = robot->getAbsoluteMaxTransDecel() / 1000;
  // TODO: Fix rqt dynamic_reconfigure gui to handle empty intervals
  // Until then, set unit length interval.
  dynConf_min.lat_accel = ((robot->getAbsoluteMaxLatAccel() > 0.0) ? robot->getAbsoluteMaxLatAccel() : 0.1) / 1000;
  dynConf_min.lat_decel = ((robot->getAbsoluteMaxLatDecel() > 0.0) ? robot->getAbsoluteMaxLatDecel() : 0.1) / 1000;
  dynConf_min.rot_accel = robot->getAbsoluteMaxRotAccel() * M_PI/180;
  dynConf_min.rot_decel = robot->getAbsoluteMaxRotDecel() * M_PI/180;
  
  // I'm setting these upper bounds relitivly arbitrarily, feel free to increase them.
  dynConf_min.TicksMM     = 10;
  dynConf_min.DriftFactor = -200;
  dynConf_min.RevCount    = -32760;
  
  dynamic_reconfigure_server->setConfigMin(dynConf_min);
  
  
  // 初始化参数的最大值 其中TickMM=200 DriftFactor=200 Revount=32760
  rosaria::RosAriaConfig dynConf_max;
  dynConf_max.trans_accel = robot->getAbsoluteMaxTransAccel() / 1000;
  dynConf_max.trans_decel = robot->getAbsoluteMaxTransDecel() / 1000;
  // TODO: Fix rqt dynamic_reconfigure gui to handle empty intervals
  // Until then, set unit length interval.
  dynConf_max.lat_accel = ((robot->getAbsoluteMaxLatAccel() > 0.0) ? robot->getAbsoluteMaxLatAccel() : 0.1) / 1000;
  dynConf_max.lat_decel = ((robot->getAbsoluteMaxLatDecel() > 0.0) ? robot->getAbsoluteMaxLatDecel() : 0.1) / 1000;
  dynConf_max.rot_accel = robot->getAbsoluteMaxRotAccel() * M_PI/180;
  dynConf_max.rot_decel = robot->getAbsoluteMaxRotDecel() * M_PI/180;
  
  // I'm setting these upper bounds relitivly arbitrarily, feel free to increase them.
  dynConf_max.TicksMM     = 200;
  dynConf_max.DriftFactor = 200;
  dynConf_max.RevCount    = 32760;
  
  dynamic_reconfigure_server->setConfigMax(dynConf_max);
  
   // 初始化参数的默认值
  rosaria::RosAriaConfig dynConf_default;
  dynConf_default.trans_accel = robot->getTransAccel() / 1000;
  dynConf_default.trans_decel = robot->getTransDecel() / 1000;
  dynConf_default.lat_accel   = robot->getLatAccel() / 1000;
  dynConf_default.lat_decel   = robot->getLatDecel() / 1000;
  dynConf_default.rot_accel   = robot->getRotAccel() * M_PI/180;
  dynConf_default.rot_decel   = robot->getRotDecel() * M_PI/180;

  dynConf_default.TicksMM     = TicksMM;
  dynConf_default.DriftFactor = DriftFactor;
  dynConf_default.RevCount    = RevCount;
  
  dynamic_reconfigure_server->setConfigDefault(dynConf_max);
  
  dynamic_reconfigure_server->setCallback(boost::bind(&RosAriaNode::dynamic_reconfigureCB, this, _1, _2));

  // Enable the motors
  robot->enableMotors();

  // disable sonars on startup
  robot->disableSonar();

  // callback will  be called by ArRobot background processing thread for every SIP data packet received from robot
  robot->addSensorInterpTask("ROSPublishingTask", 100, &myPublishCB);

  // Initialize bumpers with robot number of bumpers
  bumpers.front_bumpers.resize(robot->getNumFrontBumpers());
  bumpers.rear_bumpers.resize(robot->getNumRearBumpers());

  // Run ArRobot background processing thread
  robot->runAsync(true);

  return 0;
}

//.........这里部分代码省略.........
  dynConf_default.trans_vel_max = robot->getTransVelMax() / 1000.0; 
  dynConf_default.rot_vel_max = robot->getRotVelMax() *M_PI/180.0; 
  dynConf_default.trans_accel = robot->getTransAccel() / 1000.0;
  dynConf_default.trans_decel = robot->getTransDecel() / 1000.0;
  dynConf_default.rot_accel   = robot->getRotAccel() * M_PI/180.0;
  dynConf_default.rot_decel   = robot->getRotDecel() * M_PI/180.0;

/*  ROS_ERROR("ON ROBOT NOW\n\
Trans vel max: %f\n\
Rot vel max: %f\n\
\n\
trans accel: %f\n\
trans decel: %f\n\
rot accel: %f\n\
rot decel: %f", robot->getTransVelMax(), robot->getRotVelMax(), robot->getTransAccel(), robot->getTransDecel(), robot->getRotAccel(), robot->getRotDecel());

  ROS_ERROR("IN DEFAULT CONFIG\n\
Trans vel max: %f\n\
Rot vel max: %f\n\
\n\
trans accel: %f\n\
trans decel: %f\n\
rot accel: %f\n\
rot decel: %f\n", dynConf_default.trans_vel_max,  dynConf_default.rot_vel_max, dynConf_default.trans_accel, dynConf_default.trans_decel, dynConf_default.rot_accel, dynConf_default.rot_decel);*/

  TicksMM = robot->getOrigRobotConfig()->getTicksMM();
  DriftFactor = robot->getOrigRobotConfig()->getDriftFactor();
  RevCount = robot->getOrigRobotConfig()->getRevCount();

  dynConf_default.TicksMM     = TicksMM;
  dynConf_default.DriftFactor = DriftFactor;
  dynConf_default.RevCount    = RevCount;
  
  dynamic_reconfigure_server->setConfigDefault(dynConf_default);

  for(int i = 0; i < 16; i++)
  {
    sonar_tf_array[i].header.frame_id = frame_id_base_link;
    std::stringstream _frame_id;
    _frame_id << "sonar" << i;
    sonar_tf_array[i].child_frame_id = _frame_id.str();
    ArSensorReading* _reading = NULL;
    _reading = robot->getSonarReading(i);
    sonar_tf_array[i].transform.translation.x = _reading->getSensorX() / 1000.0;
    sonar_tf_array[i].transform.translation.y = _reading->getSensorY() / 1000.0;
    sonar_tf_array[i].transform.translation.z = 0.19;
    sonar_tf_array[i].transform.rotation = tf::createQuaternionMsgFromYaw(_reading->getSensorTh() * M_PI / 180.0);
  }

  for (int i=0;i<16;i++) {
      sensor_msgs::Range r;
      ranges.data.push_back(r);
  }

  int i=0,j=0;
  if (sonars__crossed_the_streams) {
    i=8;
    j=8;
  }
  for(; i<16; i++) {
    //populate the RangeArray msg
    std::stringstream _frame_id;
    _frame_id << "sonar" << i;
    ranges.data[i].header.frame_id = _frame_id.str();
    ranges.data[i].radiation_type = 0;
    ranges.data[i].field_of_view = 0.2618f;