本文整理汇总了C++中display::printf方法的典型用法代码示例。如果您正苦于以下问题：C++ display::printf方法的具体用法？C++ display::printf怎么用？C++ display::printf使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类display的用法示例。
在下文中一共展示了display::printf方法的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: while
bool iso9660::fclose(file_table *temp2) //change
{
file_table *temp,*temp1;
int count,t;
/////////////change
temp=ft_head;
if(temp->next!=0 && temp!=0)
{
//disp1.printf("\nhead address %x",ft_head->next);
while(temp->next!=temp2 && temp->next!=0)
{
temp=temp->next;
}
if(temp!=0)
{
temp->next=temp2->next;
klm.kdfree(&temp2,sizeof(file_table));
disp1.printf("\nSuccessfully closed the file");
return 1;
}
else
{
disp1.printf("\nFile not found in the file table");
return 0;
}
}
else
{
disp1.printf("\nNo file table is created");
return 0;
}
}示例2: if
bool iso9660::move_to_dir(char *path)
{
int flag,bp,prv_fldr=1,f_cnt,g,st=0,i=0,j,file_flag=0,folder_flag=0,k,count;
unsigned char tname[30],*bf,*bf2;
short int file_location,parent;
if((pr.pts%512)==0)
count=pr.pts/512;
else
count=(pr.pts/512)+1;
bf=(unsigned char*) (klm.kdmalloc (count*512));
load_rdr(0,pr.rdr);
drv->pioread(pr.lptb*4,count,bf);
int off=0;
if(path[0]!='\0' && path[0]=='/')
{
path++;
}
while(path[i]!='\0')
{
load_ptb(0,bf);
off=0;
bp=0;
flag=0;
j=0;
if(i==0)
file_location=pt.loc_ext;
while(path[i]!='/' && path[i]!='\0')
{
tname[j++]=path[i++];
}
tname[j]='\0';
if(path[i]=='/' || path[i]=='\0')
{
if(path[i]!='\0')
i++;
while(off<pr.pts)
{
if(pt.len_di%2==0)
{
off=off+8+pt.len_di;
if(off!=pr.pts)
{
load_ptb(off,bf);
bp++;
}
if(prv_fldr!=pt.par_dir_no)
{
flag=0;
continue;
}
for(g=0;tname[g]!='\0' && tname[g]==pt.dir_id[g];++g);
//disp1.printf("\n%c %x",tname[g],g);
if((off==pr.pts && pt.len_di!=g)||(g==pt.len_di && parent==pt.par_dir_no && tname[g]!='\0'))
{
disp1.printf("\nInvalid Directory %s",tname);
return 0;
}
else if(g==pt.len_di && tname[g]=='\0')
{
file_location=pt.loc_ext;
parent=pt.par_dir_no;
prv_fldr=bp+1;
flag=1;
//disp1.printf("\nParent Directory of %s is %x",tname,parent);
break;
}
}
else
{
off=off+8+pt.len_di+1;
if(off!=pr.pts)
{
load_ptb(off,bf);
bp++;
}
if(prv_fldr!=pt.par_dir_no)
{
flag=0;
continue;
}
for(g=0;tname[g]!='\0' && tname[g]==pt.dir_id[g];g++);
// disp1.printf("\n%c %x",tname[g],g);
if((off==pr.pts && g!=pt.len_di)||(g==pt.len_di && parent==pt.par_dir_no && tname[g]!='\0'))
{
disp1.printf("\nInvalid Directory %s",tname);
//.........这里部分代码省略.........
示例3:
iso9660::iso9660(drive *d)
{
unsigned char bf[2048];
int i,count;
drv = d;
drv->pioread(64,4,bf);
pr.vdt=bf[0];
pr.si[0]=bf[1];
pr.si[1]=bf[2];
pr.si[2]=bf[3];
pr.si[3]=bf[4];
pr.si[4]=bf[5];
if(pr.si[0]=='C' && pr.si[1]=='D' && pr.si[2]=='0' && pr.si[3]=='0' && pr.si[4]=='1' && pr.vdt==1)
disp1.printf("\nIso9660 file system detected\n");
else
{
disp1.printf("\nUnknown file system\n");
return;
}
//disp1.printf("\nsystem identifier ");
for(i=0;i<32;++i)
{
//disp1.printf("%c",bf[8+i]);
pr.sid[i]=bf[8+i];
}
//disp1.printf("\nvolume identifier ");
for(i=0;i<32;++i)
{
//disp1.printf("%c",bf[40+i]);
pr.vid[i]=bf[40+i];
}
//disp1.printf("\nvolume space size ");
pr.vss=return_int (bf,84,1);
//disp1.printf("%x",pr.vss);
//disp1.printf("\nvolume set size ");
pr.vsts=two_return_int (bf,122,1);
//disp1.printf("%x",pr.vsts);
//disp1.printf("\nvolume seq number ");
pr.vsn=two_return_int (bf,126,1);
//disp1.printf("%x",pr.vsn);
//disp1.printf("\nlogical block size ");
pr.lbs=two_return_int (bf,130,1);
//disp1.printf(" %x",pr.lbs);
//disp1.printf("\npath table size ");
pr.pts=return_int (bf,136,1);
//disp1.printf("%x",pr.pts);
//disp1.printf("\nlocation of l path table ");
pr.lptb=return_int (bf,140,0);
//disp1.printf("%x",pr.lptb);
//disp1.printf("\nlocation of m path table ");
pr.mptb=return_int (bf,148,1);
//disp1.printf("%x",pr.mptb);
//disp1.printf("\nroot directory record ");
for(i=0;i<34;++i)
{
//disp1.printf("%x",bf[156+i]);
pr.rdr[i]=bf[156+i];
}
load_rdr(0,pr.rdr);
//disp1.printf("\nApplication identifier ");
for(i=0;i<128;++i)
{
//disp1.printf("%c",bf[574+i]);
pr.apid[i]=bf[574+i];
}
//disp1.printf("\ndate and time of volume creation ");
for(i=0;i<16;++i)
{
//disp1.printf("%c",bf[813+i]);
pr.vdnt[i]=bf[813+i];
}
//disp1.printf("\ndate and time of volume modification ");
for(i=0;i<16;++i)
{
//disp1.printf("%c",bf[830+i]);
pr.mdnt[i]=bf[830+i];
}
//disp1.printf("\nEf fective date and time of volume ");
//.........这里部分代码省略.........