当前位置: 首页>>代码示例>>C++>>正文

C++ clDebugEvent::Skip方法代码示例

本文整理汇总了C++中clDebugEvent::Skip方法的典型用法代码示例。如果您正苦于以下问题：C++ clDebugEvent::Skip方法的具体用法？C++ clDebugEvent::Skip怎么用？C++ clDebugEvent::Skip使用的例子？那么恭喜您, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类clDebugEvent的用法示例。


在下文中一共展示了clDebugEvent::Skip方法的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: OnDebugStart

void LLDBDebuggerPlugin::OnDebugStart(clDebugEvent& event)
{
    event.Skip();
    return;
    
    if ( ::PromptForYesNoDialogWithCheckbox(_("Would you like to use LLDB debugger as your primary debugger?"), "UseLLDB") != wxID_YES ) {
        event.Skip();
        return;
    }
    
    // Get the executable to debug
    wxString errMsg;
    ProjectPtr pProject = WorkspaceST::Get()->FindProjectByName(event.GetProjectName(), errMsg);
    if ( !pProject ) {
        event.Skip();
        return;
    }
    
    wxSetWorkingDirectory ( pProject->GetFileName().GetPath() );
    BuildConfigPtr bldConf = WorkspaceST::Get()->GetProjBuildConf ( pProject->GetName(), wxEmptyString );
    if ( !bldConf ) {
        event.Skip();
        return;
    }
    
    // Show the terminal
    ShowTerminal("LLDB Console Window");
    if ( m_debugger.Start("/home/eran/devl/TestArea/TestHang/Debug/TestHang") ) {
        m_debugger.AddBreakpoint("main");
        m_debugger.ApplyBreakpoints();
        m_debugger.Run("/tmp/in", "/tmp/out", "/tmp/err", wxArrayString(), wxArrayString(), ::wxGetCwd());
    }
}
开发者ID:idkqh7，项目名称:codelite，代码行数:33，代码来源:lldbdebugger-plugin.cpp

示例2: OnDebugContinue

void NodeJSDebugger::OnDebugContinue(clDebugEvent& event)
{
    event.Skip();
    CHECK_RUNNING();
    event.Skip(false);
    Continue();
}
开发者ID:capturePointer，项目名称:codelite，代码行数:7，代码来源:NodeJSDebugger.cpp

示例3: OnCanInteract

void NodeJSDebugger::OnCanInteract(clDebugEvent& event)
{
    event.Skip();
    CHECK_RUNNING();
    event.Skip(false);
    event.SetAnswer(IsCanInteract());
}
开发者ID:capturePointer，项目名称:codelite，代码行数:7，代码来源:NodeJSDebugger.cpp

示例4: OnVoid

void NodeJSDebugger::OnVoid(clDebugEvent& event)
{
    event.Skip();
    CHECK_RUNNING();
    event.Skip(false);
    wxUnusedVar(event);
}
开发者ID:capturePointer，项目名称:codelite，代码行数:7，代码来源:NodeJSDebugger.cpp

示例5: OnDebugStart

void NodeJSDebugger::OnDebugStart(clDebugEvent& event)
{
    event.Skip();
    CHECK_COND_RET(NodeJSWorkspace::Get()->IsOpen());

    // Our to handle
    event.Skip(false);
    if(m_socket && m_socket->IsConnected()) {
        Continue();
        return;
    };

    NodeJSDebuggerDlg dlg(EventNotifier::Get()->TopFrame(), NodeJSDebuggerDlg::kDebug);
    if(dlg.ShowModal() != wxID_OK) {
        return;
    }

    wxString command = dlg.GetCommand();

    if(!m_node.ExecuteConsole(command, "", false, command)) {
        ::wxMessageBox(_("Failed to start NodeJS application"), "CodeLite", wxOK | wxICON_ERROR | wxCENTER);
        m_socket.Reset(NULL);
    }

    // already connected?
    m_socket.Reset(new NodeJSSocket(this));
    NodeJSWorkspaceUser userConf(NodeJSWorkspace::Get()->GetFilename().GetFullPath());
    userConf.Load();
    m_socket->Connect("127.0.0.1", userConf.GetDebuggerPort());
}
开发者ID:capturePointer，项目名称:codelite，代码行数:30，代码来源:NodeJSDebugger.cpp

示例6: OnToggleBreakpoint

void NodeJSDebugger::OnToggleBreakpoint(clDebugEvent& event)
{
    event.Skip();
    if(NodeJSWorkspace::Get()->IsOpen()) {
        event.Skip(false);
        IEditor* editor = clGetManager()->GetActiveEditor();
        if(editor && (editor->GetFileName().GetFullPath() == event.GetFileName())) {
            // Correct editor
            // add marker
            NodeJSBreakpoint bp = m_bptManager.GetBreakpoint(event.GetFileName(), event.GetInt());
            if(bp.IsOk()) {
                if(bp.IsApplied() && IsConnected()) {
                    // Tell NodeJS to delete this breakpoint
                    DeleteBreakpoint(bp);
                }
                m_bptManager.DeleteBreakpoint(event.GetFileName(), event.GetInt());
            } else {
                // We have no breakpoint on this file/line (yet)
                m_bptManager.AddBreakpoint(event.GetFileName(), event.GetInt());
                bp = m_bptManager.GetBreakpoint(event.GetFileName(), event.GetInt());
                if(IsConnected()) {
                    SetBreakpoint(bp);
                }
            }

            // Update the UI
            m_bptManager.SetBreakpoints(editor);
            clDebugEvent event(wxEVT_NODEJS_DEBUGGER_UPDATE_BREAKPOINTS_VIEW);
            EventNotifier::Get()->AddPendingEvent(event);
        }
    }
}
开发者ID:capturePointer，项目名称:codelite，代码行数:32，代码来源:NodeJSDebugger.cpp

示例7: OnAttach

void NodeJSDebugger::OnAttach(clDebugEvent& event)
{
#ifdef __WXMSW__
    if(event.GetDebuggerName() != "NodeJS Debugger") {
        event.Skip();
        return;
    }
    event.Skip(false);
    ::wxMessageBox(_("Debugging a running Node.js process is only available on Linux / OSX"), "CodeLite",
                   wxICON_WARNING | wxCENTER | wxOK);
#else

    if(event.GetDebuggerName() != "NodeJS Debugger") {
        event.Skip();
        return;
    }

    event.Skip(false); // ours to handle, stop the event chain

    if(m_socket && m_socket->IsConnected()) {
        ::wxMessageBox(_("An active debug session is already running"), "CodeLite", wxICON_WARNING | wxCENTER | wxOK);
        return;
    };

    ::kill(event.GetInt(), SIGUSR1);
    // already connected?
    m_socket.Reset(new NodeJSSocket(this));
    m_socket->Connect("127.0.0.1", 5858);
#endif
}
开发者ID:lpc1996，项目名称:codelite，代码行数:30，代码来源:NodeJSDebugger.cpp

示例8: OnDebugContinue

void LLDBPlugin::OnDebugContinue(clDebugEvent& event)
{
    event.Skip();
    if(m_connector.IsRunning()) {
        // we are the active debugger
        CL_DEBUG("CODELITE>> continue...");
        m_connector.Continue();
        event.Skip(false);
    }
}
开发者ID:eranif，项目名称:codelite，代码行数:10，代码来源:LLDBPlugin.cpp

示例9: OnStopDebugger

void NodeJSDebugger::OnStopDebugger(clDebugEvent& event)
{
    event.Skip();
    CHECK_RUNNING();

    event.Skip(false);
    m_node.Terminate();
#if defined(__WXGTK__)||defined(__WXOSX__)
    ConnectionLost("Debug session stopped");
#endif
}
开发者ID:capturePointer，项目名称:codelite，代码行数:11，代码来源:NodeJSDebugger.cpp

示例10: OnDebuggerStopped

void DebuggerDisassemblyTab::OnDebuggerStopped(clDebugEvent& e)
{
    e.Skip();
    DoClearDisassembleView();
    DoClearRegistersView();
    m_oldValues.clear();
}
开发者ID:292388900，项目名称:codelite，代码行数:7，代码来源:DebuggerDisassemblyTab.cpp

示例11: OnConsoleLog

void NodeJSDebuggerPane::OnConsoleLog(clDebugEvent& event)
{
    event.Skip();
    m_consoleLog->AppendText(event.GetString());
    ::clRecalculateSTCHScrollBar(m_consoleLog);
    m_consoleLog->ScrollToEnd();
}
开发者ID:huanghjb，项目名称:codelite，代码行数:7，代码来源:NodeJSDebuggerPane.cpp

示例12: OnToggleInterrupt

void LLDBPlugin::OnToggleInterrupt(clDebugEvent& event)
{
    CHECK_IS_LLDB_SESSION();
    event.Skip();
    CL_DEBUG("CODELITE: interrupting debuggee");
    if(!m_connector.IsCanInteract()) { m_connector.Interrupt(kInterruptReasonNone); }
}
开发者ID:eranif，项目名称:codelite，代码行数:7，代码来源:LLDBPlugin.cpp

示例13: OnToggleBreakpoint

void XDebugManager::OnToggleBreakpoint(clDebugEvent& e)
{
    if ( !PHPWorkspace::Get()->IsOpen() ) {
        e.Skip();
        return;
    }
    
    // User toggled a breakpoint
    IEditor* editor = m_plugin->GetManager()->GetActiveEditor();
    if ( editor && editor->GetFileName().GetFullPath() == e.GetFileName() ) {
        // Correct editor
        // add marker
        if ( m_breakpointsMgr.HasBreakpoint(e.GetFileName(), e.GetInt()) ) {
            
            XDebugBreakpoint bp;
            m_breakpointsMgr.GetBreakpoint(e.GetFileName(), e.GetInt(), bp);
            if ( bp.IsApplied() && m_readerThread ) {
                // Remove it from XDebug as well
                DoDeleteBreakpoint( bp.GetBreakpointId() );
                
            }
            m_breakpointsMgr.DeleteBreakpoint( e.GetFileName(), e.GetInt() );
            
        } else {
            m_breakpointsMgr.AddBreakpoint( e.GetFileName(), e.GetInt() );
            DoApplyBreakpoints();
            
        }
        DoRefreshBreakpointsMarkersForEditor( editor );
    }
}
开发者ID:gahr，项目名称:codelite，代码行数:31，代码来源:XDebugManager.cpp

示例14: OnNodeJSDebuggerStarted

void WebTools::OnNodeJSDebuggerStarted(clDebugEvent& event)
{
    event.Skip();
    m_savePerspective = clGetManager()->GetDockingManager()->SavePerspective();

    // Show the debugger pane
    if(!m_nodejsDebuggerPane) {
        m_nodejsDebuggerPane = new NodeJSDebuggerPane(EventNotifier::Get()->TopFrame());
        clGetManager()->GetDockingManager()->AddPane(m_nodejsDebuggerPane,
                                                     wxAuiPaneInfo()
                                                         .Layer(5)
                                                         .Name("nodejs_debugger")
                                                         .Caption("Node.js Debugger")
                                                         .CloseButton(false)
                                                         .MaximizeButton()
                                                         .Bottom()
                                                         .Position(0));
    }

    wxString layout;
    wxFileName fnNodeJSLayout(clStandardPaths::Get().GetUserDataDir(), "nodejs.layout");
    fnNodeJSLayout.AppendDir("config");
    if(FileUtils::ReadFileContent(fnNodeJSLayout, layout)) {
        m_mgr->GetDockingManager()->LoadPerspective(layout);
    }
    EnsureAuiPaneIsVisible("nodejs_debugger", true);

    m_hideToolBarOnDebugStop = false;
    if(!m_mgr->AllowToolbar()) {
        // Using native toolbar
        m_hideToolBarOnDebugStop = !m_mgr->IsToolBarShown();
        m_mgr->ShowToolBar(true);
    }
}
开发者ID:capturePointer，项目名称:codelite，代码行数:34，代码来源:webtools.cpp

示例15: OnExceptionThrown

void NodeJSDebuggerPane::OnExceptionThrown(clDebugEvent& event)
{
    event.Skip();
    ::wxMessageBox(_("An uncaught exception thrown!"), "CodeLite", wxICON_ERROR | wxOK | wxCENTER);
    NodeJSDebugger::Ptr_t debugger = NodeJSWorkspace::Get()->GetDebugger();
    if(!debugger) return;
    debugger->Callstack();
}
开发者ID:huanghjb，项目名称:codelite，代码行数:8，代码来源:NodeJSDebuggerPane.cpp


注：本文中的clDebugEvent::Skip方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。