C++ clDebugEvent::GetDebuggerName方法代码示例

void NodeJSDebugger::OnAttach(clDebugEvent& event)
{
#ifdef __WXMSW__
    if(event.GetDebuggerName() != "NodeJS Debugger") {
        event.Skip();
        return;
    }
    event.Skip(false);
    ::wxMessageBox(_("Debugging a running Node.js process is only available on Linux / OSX"), "CodeLite",
                   wxICON_WARNING | wxCENTER | wxOK);
#else

    if(event.GetDebuggerName() != "NodeJS Debugger") {
        event.Skip();
        return;
    }

    event.Skip(false); // ours to handle, stop the event chain

    if(m_socket && m_socket->IsConnected()) {
        ::wxMessageBox(_("An active debug session is already running"), "CodeLite", wxICON_WARNING | wxCENTER | wxOK);
        return;
    };

    ::kill(event.GetInt(), SIGUSR1);
    // already connected?
    m_socket.Reset(new NodeJSSocket(this));
    m_socket->Connect("127.0.0.1", 5858);
#endif
}

void LLDBPlugin::OnDebugAttachToProcess(clDebugEvent& event)
{
    if(event.GetDebuggerName() != LLDB_DEBUGGER_NAME) {
        event.Skip();
        return;
    }

#ifdef __WXMSW__
    ::wxMessageBox(
        _("Attach to process with LLDB is not supported under Windows"), "CodeLite", wxOK | wxCENTER | wxICON_WARNING);
    return;
#endif

    wxString terminalTitle;
    terminalTitle << "Console PID " << event.GetInt();
    if(!DoInitializeDebugger(event, true, terminalTitle))
        return;

    LLDBConnectReturnObject retObj;
    LLDBSettings settings;
    settings.Load();

    if(m_connector.Connect(retObj, settings, 5)) {

        // Apply the environment
        EnvSetter env;

        // remove all breakpoints from previous session
        m_connector.DeleteAllBreakpoints();
        LLDBSettings settings;
        settings.Load();

        // Attach to the process
        LLDBCommand command;
        command.SetCommandType(kCommandAttachProcess);
        command.SetProcessID(event.GetInt());
        command.SetSettings(settings);
        m_connector.AttachProcessWithPID(command);

    } else {
        // Failed to connect, notify and perform cleanup
        DoCleanup();
        wxString message;
        message << _("Could not connect to codelite-lldb at '") << m_connector.GetConnectString() << "'";
        ::wxMessageBox(message, "CodeLite", wxICON_ERROR | wxOK | wxCENTER);
        return;
    }
}

void LLDBPlugin::OnDebugCoreFile(clDebugEvent& event)
{
    if(event.GetDebuggerName() != LLDB_DEBUGGER_NAME) {
        event.Skip();
        return;
    }

#ifdef __WXMSW__
    ::wxMessageBox(
        _("Debug core file with LLDB is not supported under Windows"), "CodeLite", wxOK | wxCENTER | wxICON_WARNING);
    return;
#endif

    if(!DoInitializeDebugger(event, false)) {
        return;
    }

    LLDBConnectReturnObject retObj;
    LLDBSettings settings;
    settings.Load();

    if(m_connector.Connect(retObj, settings, 5)) {

        // Apply the environment
        EnvSetter env;

        // remove all breakpoints from previous session
        m_connector.DeleteAllBreakpoints();

        LLDBCommand startCommand;
        startCommand.FillEnvFromMemory();
        startCommand.SetCommandType(kCommandDebugCoreFile);
        startCommand.SetExecutable(event.GetExecutableName());
        startCommand.SetCorefile(event.GetCoreFile());
        startCommand.SetWorkingDirectory(event.GetWorkingDirectory());
        startCommand.SetRedirectTTY(m_terminalTTY);
        m_connector.OpenCoreFile(startCommand);
    } else {
        // Failed to connect, notify and perform cleanup
        DoCleanup();
        wxString message;
        message << _("Could not connect to codelite-lldb at '") << m_connector.GetConnectString() << "'";
        ::wxMessageBox(message, "CodeLite", wxICON_ERROR | wxOK | wxCENTER);
        return;
    }
}

bool LLDBPlugin::DoInitializeDebugger(clDebugEvent& event, bool redirectOutput, const wxString& terminalTitle)
{
    if(event.GetDebuggerName() != LLDB_DEBUGGER_NAME) {
        event.Skip();
        return false;
    }

    if(m_connector.IsRunning()) {
        // Another debug session is already in progress
        ::wxMessageBox(_("Another debug session is already in progress. Please stop it first"),
                       "CodeLite",
                       wxOK | wxCENTER | wxICON_WARNING);
        return false;
    }

    TerminateTerminal();

    // If terminal is required, launch it now
    bool isWindows = wxPlatformInfo::Get().GetOperatingSystemId() & wxOS_WINDOWS;
    if(redirectOutput && !isWindows) {
        wxString realPts;
        ::LaunchTerminalForDebugger(
            terminalTitle.IsEmpty() ? event.GetExecutableName() : terminalTitle, m_terminalTTY, realPts, m_terminalPID);

        if(m_terminalPID != wxNOT_FOUND) {
            CL_DEBUG("Successfully launched terminal");

        } else {
            // Failed to launch it...
            DoCleanup();
            ::wxMessageBox(_("Failed to start terminal for debugger"), "CodeLite", wxICON_ERROR | wxOK | wxCENTER);
            return false;
        }
    }

    // Launch local server if needed
    LLDBSettings settings;
    settings.Load();
    if(!settings.IsUsingRemoteProxy() && !m_connector.LaunchLocalDebugServer()) {
        DoCleanup();
        return false;
    }

    return true;
}

void LLDBPlugin::OnDebugStart(clDebugEvent& event)
{
    if(event.GetDebuggerName() != LLDB_DEBUGGER_NAME) {
        event.Skip();
        return;
    }

    CL_DEBUG("LLDB: Initial working directory is restored to: " + ::wxGetCwd());
    {
        // Get the executable to debug
        wxString errMsg;
        ProjectPtr pProject = clCxxWorkspaceST::Get()->FindProjectByName(event.GetProjectName(), errMsg);
        if(!pProject) {
            ::wxMessageBox(wxString() << _("Could not locate project: ") << event.GetProjectName(), "LLDB Debugger",
                           wxICON_ERROR | wxOK | wxCENTER);
            return;
        }

        DirSaver ds;
        ::wxSetWorkingDirectory(pProject->GetFileName().GetPath());

        // Load LLDB settings
        LLDBSettings settings;
        settings.Load();

        BuildConfigPtr bldConf = clCxxWorkspaceST::Get()->GetProjBuildConf(pProject->GetName(), wxEmptyString);
        if(!bldConf) {
            ::wxMessageBox(wxString() << _("Could not locate the requested buid configuration"), "LLDB Debugger",
                           wxICON_ERROR | wxOK | wxCENTER);
            return;
        }

        // Launch codelite-lldb now.
        // Choose wether we need to debug a local or remote target

        // Honour the project settings
        if(bldConf->GetIsDbgRemoteTarget()) {
            long nPort(wxNOT_FOUND);
            bldConf->GetDbgHostPort().ToCLong(&nPort);
            settings.SetProxyIp(bldConf->GetDbgHostName());
            settings.SetProxyPort(nPort);
            settings.EnableFlag(kLLDBOptionUseRemoteProxy, true);
        }

        if(!settings.IsUsingRemoteProxy()) {
            // Not using a remote proxy, launch the debug server
            if(!m_connector.LaunchLocalDebugServer(settings.GetDebugserver())) { return; }
        }

        // Determine the executable to debug, working directory and arguments
        EnvSetter env(NULL, NULL, pProject ? pProject->GetName() : wxString(), bldConf->GetName());
        wxString exepath = bldConf->GetCommand();
        wxString args;
        wxString workingDirectory;
        // Get the debugging arguments.
        if(bldConf->GetUseSeparateDebugArgs()) {
            args = bldConf->GetDebugArgs();
        } else {
            args = bldConf->GetCommandArguments();
        }

        workingDirectory = ::ExpandVariables(bldConf->GetWorkingDirectory(), pProject, m_mgr->GetActiveEditor());
        exepath = ::ExpandVariables(exepath, pProject, m_mgr->GetActiveEditor());

        {
            DirSaver ds;
            ::wxSetWorkingDirectory(workingDirectory);
            wxFileName execToDebug(exepath);
            if(execToDebug.IsRelative()) { execToDebug.MakeAbsolute(); }

            //////////////////////////////////////////////////////////////////////
            // Launch terminal for IO redirection
            //////////////////////////////////////////////////////////////////////
            TerminateTerminal();

            bool isWindows = wxPlatformInfo::Get().GetOperatingSystemId() & wxOS_WINDOWS;
            if(!bldConf->IsGUIProgram() && !isWindows) {
                m_debuggerTerminal.Launch(clDebuggerTerminalPOSIX::MakeExeTitle(execToDebug.GetFullPath(), args));

                if(m_debuggerTerminal.IsValid()) {
                    CL_DEBUG("Successfully launched terminal %s", m_debuggerTerminal.GetTty());

                } else {
                    // Failed to launch it...
                    DoCleanup();
                    ::wxMessageBox(_("Failed to start terminal for debugger"), "CodeLite",
                                   wxICON_ERROR | wxOK | wxCENTER);
                    return;
                }
            }

            if(!isWindows) { workingDirectory = ::wxGetCwd(); }

            CL_DEBUG("LLDB: Using executable : " + execToDebug.GetFullPath());
            CL_DEBUG("LLDB: Working directory: " + workingDirectory);

            //////////////////////////////////////////////////////////////////////
            // Initiate the connection to codelite-lldb
            //////////////////////////////////////////////////////////////////////

//.........这里部分代码省略.........