本文整理汇总了C++中TPZAutoPointer::Id方法的典型用法代码示例。如果您正苦于以下问题：C++ TPZAutoPointer::Id方法的具体用法？C++ TPZAutoPointer::Id怎么用？C++ TPZAutoPointer::Id使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类TPZAutoPointer的用法示例。
在下文中一共展示了TPZAutoPointer::Id方法的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: ReadRefPatternDBase
//.........................................................................................................................................
void TPZRefPatternDataBase::ReadRefPatternDBase(std::ifstream &filename)
{
fElTypeRefPatterns.clear();
fIdRefPatterns.clear();
int nRefpatterns;
filename >> nRefpatterns;
for(int i = 0; i < nRefpatterns; i++)
{
TPZAutoPointer<TPZRefPattern> refP = new TPZRefPattern;
refP->ReadPattern(filename);
MElementType eltype = refP->Element(0)->Type();
fElTypeRefPatterns[eltype].push_back(refP);
fIdRefPatterns[refP->Id()] = refP;
}
}示例2: Clone
void TPZBndCond::Clone(std::map<int, TPZAutoPointer<TPZMaterial> > &matvec) {
int matid = Id();
TPZAutoPointer<TPZMaterial> refmaterial = Material();
TPZAutoPointer<TPZMaterial> newrefmaterial;
int refmatid = 0;
if(refmaterial) {
refmaterial->Clone(matvec);
refmatid = refmaterial->Id();
newrefmaterial = matvec[refmatid];
}
std::map<int, TPZAutoPointer<TPZMaterial> >::iterator matit;
matit = matvec.find(matid);
if(matit == matvec.end())
{
TPZAutoPointer<TPZMaterial> newmat = TPZAutoPointer<TPZMaterial>(new TPZBndCond(*this, newrefmaterial));
matvec[matid] = newmat;
}
}示例3: AddPlacaOrtho
void TPZMulticamadaOrthotropic::AddPlacaOrtho(TPZAutoPointer<TPZMaterial> material, REAL height){
TPZAutoPointer<TPZMaterial> bcptr;
fCompMesh->InsertMaterialObject(material);
TPZFNMatrix<9> val1(3,3,0.),val2(3,1,0.);
TPZBCTension *bc = new TPZBCTension(material,-material->Id()*4,4,val1,val2, 1., this,fPlacaOrth.NElements());
bcptr = TPZAutoPointer<TPZMaterial>(bc);
fCompMesh->InsertMaterialObject(bcptr);
bc = new TPZBCTension(material,-material->Id()*4-1,4,val1,val2, 1., this,fPlacaOrth.NElements());
bcptr = TPZAutoPointer<TPZMaterial>(bc);
fCompMesh->InsertMaterialObject(bcptr);
bc = new TPZBCTension(material,-material->Id()*4-2,4,val1,val2, -1., this,fPlacaOrth.NElements());
bcptr = TPZAutoPointer<TPZMaterial>(bc);
fCompMesh->InsertMaterialObject(bcptr);
bc = new TPZBCTension(material,-material->Id()*4-3,4,val1,val2, -1.,this,fPlacaOrth.NElements());
bcptr = TPZAutoPointer<TPZMaterial>(bc);
fCompMesh->InsertMaterialObject(bcptr);
// fPlacaOrth.Push(placa);
int nnodes = fGeoMesh->NodeVec().NElements();
fGeoMesh->NodeVec().Resize(nnodes+(fNelx+1)*(fNely+1));
int ix, iy;
TPZManVector<REAL,3> coord(3,fZMax+height);
fZMax += height;
for(ix=0; ix<= fNelx; ix++) {
for(iy=0; iy<= fNely; iy++) {
coord[0] = ix*fDx-fDx*REAL(fNelx/2.);
coord[1] = iy*fDy-fDy*REAL(fNely/2.);
fGeoMesh->NodeVec()[nnodes+ix+iy*(fNelx+1)].Initialize(coord,*fGeoMesh);
}
}
int nodebase1 = nnodes - (fNelx+1)*(fNely+1);
int elx, ely;
TPZManVector<int,8> nodeindexes(8,-1);
for(elx=0; elx<fNelx; elx++) {
for(ely=0; ely<fNely; ely++) {
nodeindexes[0] = nodebase1+elx+ely*(fNelx+1);
nodeindexes[1] = nodebase1+elx+1+ely*(fNelx+1);
nodeindexes[2] = nodebase1+elx+1+(ely+1)*(fNelx+1);
nodeindexes[3] = nodebase1+elx+(ely+1)*(fNelx+1);
int i;
for(i=0; i<4; i++) nodeindexes[i+4] = nodeindexes[i]+(fNelx+1)*(fNely+1);
int index;
TPZGeoEl *gel = fGeoMesh->CreateGeoElement (ECube, nodeindexes, material->Id(), index);
if(ely == 0) TPZGeoElBC gbc1(gel,21,-material->Id()*4);
if(elx == fNelx-1) TPZGeoElBC gbc2(gel,22,-material->Id()*4-1);
if(ely == fNely-1) TPZGeoElBC gbc3(gel,23,-material->Id()*4-2);
if(elx == 0) TPZGeoElBC gbc4(gel,24,-material->Id()*4-3);
int nplaca = fPlacaOrth.NElements();
if(nplaca == 0 && elx == 0 && ely == 0) {
TPZBndCond *bc2 = new TPZBndCond(material,-100,0,val1,val2);
bcptr = TPZAutoPointer<TPZMaterial>(bc2);
fCompMesh->InsertMaterialObject(bcptr);
TPZGeoElBC gbc5(gel,0,-100);
val1(0,0) = 1.e12;
val1(2,2) = 1.e12;
TPZBndCond *bc3 = new TPZBndCond(material,-101,2,val1,val2);
bcptr = TPZAutoPointer<TPZMaterial>(bc3);
fCompMesh->InsertMaterialObject(bcptr);
TPZGeoElBC gbc6(gel,3,-101);
val1.Zero();
val1(0,0) = 0.;
val1(2,2) = 1.e12;
TPZBndCond *bc4 = new TPZBndCond(material,-102,2,val1,val2);
bcptr = TPZAutoPointer<TPZMaterial>(bc4);
fCompMesh->InsertMaterialObject(bcptr);
TPZGeoElBC gbc7(gel,2,-102);
}
if(elx == fNelx/2 && ely == fNely/2) {
TPZPlacaOrthotropic placa(gel,fZMax-height,fZMax);
fPlacaOrth.Push(placa);
}
}
}
}