C++ SkRRect::setEmpty方法代码示例

 SkRRect makeRRect() {
     SkRRect rrect;
     RandomSetRRect rrectType = makeSetRRectType();
     if (fPrintName) {
         SkDebugf("%.*s%s\n", fPathDepth * 3, fTab, gRandomSetRRectNames[rrectType]);
     }
     switch (rrectType) {
     case kSetEmpty:
         rrect.setEmpty();
         break;
     case kSetRect: {
         SkRect rect = makeRect();
         rrect.setRect(rect);
     }
     break;
     case kSetOval: {
         SkRect oval = makeRect();
         rrect.setOval(oval);
     }
     break;
     case kSetRectXY: {
         SkRect rect = makeRect();
         SkScalar xRad = makeScalar();
         SkScalar yRad = makeScalar();
         rrect.setRectXY(rect, xRad, yRad);
     }
     break;
     case kSetNinePatch: {
         SkRect rect = makeRect();
         SkScalar leftRad = makeScalar();
         SkScalar topRad = makeScalar();
         SkScalar rightRad = makeScalar();
         SkScalar bottomRad = makeScalar();
         rrect.setNinePatch(rect, leftRad, topRad, rightRad, bottomRad);
         SkDebugf("");  // keep locals in scope
     }
     break;
     case kSetRectRadii: {
         SkRect rect = makeRect();
         SkVector radii[4];
         makeVectorArray(SK_ARRAY_COUNT(radii), radii);
         rrect.setRectRadii(rect, radii);
     }
     break;
     }
     return rrect;
 }

// Called for a matrix that should cause SkRRect::transform to fail.
static void assert_transform_failure(skiatest::Reporter* reporter, const SkRRect& orig,
                                     const SkMatrix& matrix) {
    // The test depends on the fact that the original is not empty.
    SkASSERT(!orig.isEmpty());
    SkRRect dst;
    dst.setEmpty();

    const SkRRect copyOfDst = dst;
    const SkRRect copyOfOrig = orig;
    bool success = orig.transform(matrix, &dst);
    // This transform should fail.
    REPORTER_ASSERT(reporter, !success);
    // Since the transform failed, dst should be unchanged.
    REPORTER_ASSERT(reporter, copyOfDst == dst);
    // original should not be modified.
    REPORTER_ASSERT(reporter, copyOfOrig == orig);
    REPORTER_ASSERT(reporter, orig != dst);
}

// Test out the cases when the RR degenerates to a rect
static void test_round_rect_rects(skiatest::Reporter* reporter) {
    SkRect r;

    //----
    SkRRect empty;

    empty.setEmpty();

    REPORTER_ASSERT(reporter, SkRRect::kEmpty_Type == empty.type());
    r = empty.rect();
    REPORTER_ASSERT(reporter, 0 == r.fLeft && 0 == r.fTop && 0 == r.fRight && 0 == r.fBottom);

    //----
    SkRect rect = SkRect::MakeLTRB(0, 0, kWidth, kHeight);
    SkRRect rr1;
    rr1.setRectXY(rect, 0, 0);

    REPORTER_ASSERT(reporter, SkRRect::kRect_Type == rr1.type());
    r = rr1.rect();
    REPORTER_ASSERT(reporter, rect == r);

    //----
    SkPoint radii[4] = { { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 } };

    SkRRect rr2;
    rr2.setRectRadii(rect, radii);

    REPORTER_ASSERT(reporter, SkRRect::kRect_Type == rr2.type());
    r = rr2.rect();
    REPORTER_ASSERT(reporter, rect == r);

    //----
    SkPoint radii2[4] = { { 0, 0 }, { 20, 20 }, { 50, 50 }, { 20, 50 } };

    SkRRect rr3;
    rr3.setRectRadii(rect, radii2);
    REPORTER_ASSERT(reporter, SkRRect::kComplex_Type == rr3.type());
}

// Test out the basic API entry points
static void test_round_rect_basic(skiatest::Reporter* reporter) {
    // Test out initialization methods
    SkPoint zeroPt = { 0, 0 };
    SkRRect empty;

    empty.setEmpty();

    REPORTER_ASSERT(reporter, SkRRect::kEmpty_Type == empty.type());
    REPORTER_ASSERT(reporter, empty.rect().isEmpty());

    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter, zeroPt == empty.radii((SkRRect::Corner) i));
    }

    //----
    SkRect rect = SkRect::MakeLTRB(0, 0, kWidth, kHeight);

    SkRRect rr1;
    rr1.setRect(rect);

    REPORTER_ASSERT(reporter, SkRRect::kRect_Type == rr1.type());
    REPORTER_ASSERT(reporter, rr1.rect() == rect);

    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter, zeroPt == rr1.radii((SkRRect::Corner) i));
    }

    //----
    SkPoint halfPoint = { SkScalarHalf(kWidth), SkScalarHalf(kHeight) };
    SkRRect rr2;
    rr2.setOval(rect);

    REPORTER_ASSERT(reporter, SkRRect::kOval_Type == rr2.type());
    REPORTER_ASSERT(reporter, rr2.rect() == rect);

    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter,
                        rr2.radii((SkRRect::Corner) i).equalsWithinTolerance(halfPoint));
    }

    //----
    SkPoint p = { 5, 5 };
    SkRRect rr3;
    rr3.setRectXY(rect, p.fX, p.fY);

    REPORTER_ASSERT(reporter, SkRRect::kSimple_Type == rr3.type());
    REPORTER_ASSERT(reporter, rr3.rect() == rect);

    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter, p == rr3.radii((SkRRect::Corner) i));
    }

    //----
    SkPoint radii[4] = { { 5, 5 }, { 5, 5 }, { 5, 5 }, { 5, 5 } };

    SkRRect rr4;
    rr4.setRectRadii(rect, radii);

    REPORTER_ASSERT(reporter, SkRRect::kSimple_Type == rr4.type());
    REPORTER_ASSERT(reporter, rr4.rect() == rect);

    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter, radii[i] == rr4.radii((SkRRect::Corner) i));
    }

    //----
    SkPoint radii2[4] = { { 0, 0 }, { 0, 0 }, { 50, 50 }, { 20, 50 } };

    SkRRect rr5;
    rr5.setRectRadii(rect, radii2);

    REPORTER_ASSERT(reporter, SkRRect::kComplex_Type == rr5.type());
    REPORTER_ASSERT(reporter, rr5.rect() == rect);

    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter, radii2[i] == rr5.radii((SkRRect::Corner) i));
    }

    // Test out == & !=
    REPORTER_ASSERT(reporter, empty != rr3);
    REPORTER_ASSERT(reporter, rr3 == rr4);
    REPORTER_ASSERT(reporter, rr4 != rr5);
}

// Test out the cases when the RR degenerates to a rect
static void test_round_rect_rects(skiatest::Reporter* reporter) {
    SkRect r;
    static const SkPoint pts[] = {
        // Upper Left
        { -SK_Scalar1, -SK_Scalar1 },               // out
        { SK_Scalar1, SK_Scalar1 },                 // in
        // Upper Right
        { SkIntToScalar(101), -SK_Scalar1},         // out
        { SkIntToScalar(99), SK_Scalar1 },          // in
        // Lower Right
        { SkIntToScalar(101), SkIntToScalar(101) }, // out
        { SkIntToScalar(99), SkIntToScalar(99) },   // in
        // Lower Left
        { -SK_Scalar1, SkIntToScalar(101) },        // out
        { SK_Scalar1, SkIntToScalar(99) },          // in
        // Middle
        { SkIntToScalar(50), SkIntToScalar(50) }    // in
    };
    static const bool isIn[] = { false, true, false, true, false, true, false, true, true };

    SkASSERT(SK_ARRAY_COUNT(pts) == SK_ARRAY_COUNT(isIn));

    //----
    SkRRect empty;

    empty.setEmpty();

    REPORTER_ASSERT(reporter, SkRRect::kEmpty_Type == empty.type());
    r = empty.rect();
    REPORTER_ASSERT(reporter, 0 == r.fLeft && 0 == r.fTop && 0 == r.fRight && 0 == r.fBottom);

    //----
    SkRect rect = SkRect::MakeLTRB(0, 0, kWidth, kHeight);
    SkRRect rr1;
    rr1.setRectXY(rect, 0, 0);

    REPORTER_ASSERT(reporter, SkRRect::kRect_Type == rr1.type());
    r = rr1.rect();
    REPORTER_ASSERT(reporter, rect == r);
    for (size_t i = 0; i < SK_ARRAY_COUNT(pts); ++i) {
        REPORTER_ASSERT(reporter, isIn[i] == rr1.contains(pts[i].fX, pts[i].fY));
    }

    //----
    SkPoint radii[4] = { { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 } };

    SkRRect rr2;
    rr2.setRectRadii(rect, radii);

    REPORTER_ASSERT(reporter, SkRRect::kRect_Type == rr2.type());
    r = rr2.rect();
    REPORTER_ASSERT(reporter, rect == r);
    for (size_t i = 0; i < SK_ARRAY_COUNT(pts); ++i) {
        REPORTER_ASSERT(reporter, isIn[i] == rr2.contains(pts[i].fX, pts[i].fY));
    }

    //----
    SkPoint radii2[4] = { { 0, 0 }, { 20, 20 }, { 50, 50 }, { 20, 50 } };

    SkRRect rr3;
    rr3.setRectRadii(rect, radii2);
    REPORTER_ASSERT(reporter, SkRRect::kComplex_Type == rr3.type());
}

// Called to test various transforms on a single SkRRect.
static void test_transform_helper(skiatest::Reporter* reporter, const SkRRect& orig) {
    SkRRect dst;
    dst.setEmpty();

    // The identity matrix will duplicate the rrect.
    bool success = orig.transform(SkMatrix::I(), &dst);
    REPORTER_ASSERT(reporter, success);
    REPORTER_ASSERT(reporter, orig == dst);

    // Skew and Perspective make transform fail.
    SkMatrix matrix;
    matrix.reset();
    matrix.setSkewX(SkIntToScalar(2));
    assert_transform_failure(reporter, orig, matrix);

    matrix.reset();
    matrix.setSkewY(SkIntToScalar(3));
    assert_transform_failure(reporter, orig, matrix);

    matrix.reset();
    matrix.setPerspX(4);
    assert_transform_failure(reporter, orig, matrix);

    matrix.reset();
    matrix.setPerspY(5);
    assert_transform_failure(reporter, orig, matrix);

    // Rotation fails.
    matrix.reset();
    matrix.setRotate(SkIntToScalar(90));
    assert_transform_failure(reporter, orig, matrix);
    matrix.setRotate(SkIntToScalar(37));
    assert_transform_failure(reporter, orig, matrix);

    // Translate will keep the rect moved, but otherwise the same.
    matrix.reset();
    SkScalar translateX = SkIntToScalar(32);
    SkScalar translateY = SkIntToScalar(15);
    matrix.setTranslateX(translateX);
    matrix.setTranslateY(translateY);
    dst.setEmpty();
    success = orig.transform(matrix, &dst);
    REPORTER_ASSERT(reporter, success);
    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter,
                orig.radii((SkRRect::Corner) i) == dst.radii((SkRRect::Corner) i));
    }
    REPORTER_ASSERT(reporter, orig.rect().width() == dst.rect().width());
    REPORTER_ASSERT(reporter, orig.rect().height() == dst.rect().height());
    REPORTER_ASSERT(reporter, dst.rect().left() == orig.rect().left() + translateX);
    REPORTER_ASSERT(reporter, dst.rect().top() == orig.rect().top() + translateY);

    // Keeping the translation, but adding skew will make transform fail.
    matrix.setSkewY(SkIntToScalar(7));
    assert_transform_failure(reporter, orig, matrix);

    // Scaling in -x will flip the round rect horizontally.
    matrix.reset();
    matrix.setScaleX(SkIntToScalar(-1));
    dst.setEmpty();
    success = orig.transform(matrix, &dst);
    REPORTER_ASSERT(reporter, success);
    {
        GET_RADII;
        // Radii have swapped in x.
        REPORTER_ASSERT(reporter, origUL == dstUR);
        REPORTER_ASSERT(reporter, origUR == dstUL);
        REPORTER_ASSERT(reporter, origLR == dstLL);
        REPORTER_ASSERT(reporter, origLL == dstLR);
    }
    // Width and height remain the same.
    REPORTER_ASSERT(reporter, orig.rect().width() == dst.rect().width());
    REPORTER_ASSERT(reporter, orig.rect().height() == dst.rect().height());
    // Right and left have swapped (sort of)
    REPORTER_ASSERT(reporter, orig.rect().right() == -dst.rect().left());
    // Top has stayed the same.
    REPORTER_ASSERT(reporter, orig.rect().top() == dst.rect().top());

    // Keeping the scale, but adding a persp will make transform fail.
    matrix.setPerspX(7);
    assert_transform_failure(reporter, orig, matrix);

    // Scaling in -y will flip the round rect vertically.
    matrix.reset();
    matrix.setScaleY(SkIntToScalar(-1));
    dst.setEmpty();
    success = orig.transform(matrix, &dst);
    REPORTER_ASSERT(reporter, success);
    {
        GET_RADII;
        // Radii have swapped in y.
        REPORTER_ASSERT(reporter, origUL == dstLL);
        REPORTER_ASSERT(reporter, origUR == dstLR);
        REPORTER_ASSERT(reporter, origLR == dstUR);
        REPORTER_ASSERT(reporter, origLL == dstUL);
    }
    // Width and height remain the same.
    REPORTER_ASSERT(reporter, orig.rect().width() == dst.rect().width());
    REPORTER_ASSERT(reporter, orig.rect().height() == dst.rect().height());
//.........这里部分代码省略.........

// Test out the basic API entry points
static void test_round_rect_basic(skiatest::Reporter* reporter) {
    // Test out initialization methods
    SkPoint zeroPt = { 0, 0 };
    SkRRect empty;

    empty.setEmpty();

    REPORTER_ASSERT(reporter, SkRRect::kEmpty_Type == empty.type());
    REPORTER_ASSERT(reporter, empty.rect().isEmpty());

    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter, zeroPt == empty.radii((SkRRect::Corner) i));
    }

    //----
    SkRect rect = SkRect::MakeLTRB(0, 0, kWidth, kHeight);

    SkRRect rr1;
    rr1.setRect(rect);

    REPORTER_ASSERT(reporter, SkRRect::kRect_Type == rr1.type());
    REPORTER_ASSERT(reporter, rr1.rect() == rect);

    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter, zeroPt == rr1.radii((SkRRect::Corner) i));
    }
    SkRRect rr1_2; // construct the same RR using the most general set function
    SkVector rr1_2_radii[4] = { { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 } };
    rr1_2.setRectRadii(rect, rr1_2_radii);
    REPORTER_ASSERT(reporter, rr1_2 == rr1 && rr1_2.getType() == rr1.getType());
    SkRRect rr1_3;  // construct the same RR using the nine patch set function
    rr1_3.setNinePatch(rect, 0, 0, 0, 0);
    REPORTER_ASSERT(reporter, rr1_3 == rr1 && rr1_3.getType() == rr1.getType());

    //----
    SkPoint halfPoint = { SkScalarHalf(kWidth), SkScalarHalf(kHeight) };
    SkRRect rr2;
    rr2.setOval(rect);

    REPORTER_ASSERT(reporter, SkRRect::kOval_Type == rr2.type());
    REPORTER_ASSERT(reporter, rr2.rect() == rect);

    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter,
                        rr2.radii((SkRRect::Corner) i).equalsWithinTolerance(halfPoint));
    }
    SkRRect rr2_2;  // construct the same RR using the most general set function
    SkVector rr2_2_radii[4] = { { halfPoint.fX, halfPoint.fY }, { halfPoint.fX, halfPoint.fY },
                                { halfPoint.fX, halfPoint.fY }, { halfPoint.fX, halfPoint.fY } };
    rr2_2.setRectRadii(rect, rr2_2_radii);
    REPORTER_ASSERT(reporter, rr2_2 == rr2 && rr2_2.getType() == rr2.getType());
    SkRRect rr2_3;  // construct the same RR using the nine patch set function
    rr2_3.setNinePatch(rect, halfPoint.fX, halfPoint.fY, halfPoint.fX, halfPoint.fY);
    REPORTER_ASSERT(reporter, rr2_3 == rr2 && rr2_3.getType() == rr2.getType());

    //----
    SkPoint p = { 5, 5 };
    SkRRect rr3;
    rr3.setRectXY(rect, p.fX, p.fY);

    REPORTER_ASSERT(reporter, SkRRect::kSimple_Type == rr3.type());
    REPORTER_ASSERT(reporter, rr3.rect() == rect);

    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter, p == rr3.radii((SkRRect::Corner) i));
    }
    SkRRect rr3_2; // construct the same RR using the most general set function
    SkVector rr3_2_radii[4] = { { 5, 5 }, { 5, 5 }, { 5, 5 }, { 5, 5 } };
    rr3_2.setRectRadii(rect, rr3_2_radii);
    REPORTER_ASSERT(reporter, rr3_2 == rr3 && rr3_2.getType() == rr3.getType());
    SkRRect rr3_3;  // construct the same RR using the nine patch set function
    rr3_3.setNinePatch(rect, 5, 5, 5, 5);
    REPORTER_ASSERT(reporter, rr3_3 == rr3 && rr3_3.getType() == rr3.getType());

    //----
    test_9patch_rrect(reporter, rect, 10, 9, 8, 7, true);

    {
        // Test out the rrect from skia:3466
        SkRect rect2 = SkRect::MakeLTRB(0.358211994f, 0.755430222f, 0.872866154f, 0.806214333f);

        test_9patch_rrect(reporter,
                          rect2,
                          0.926942348f, 0.642850280f, 0.529063463f, 0.587844372f,
                          false);
    }

    //----
    SkPoint radii2[4] = { { 0, 0 }, { 0, 0 }, { 50, 50 }, { 20, 50 } };

    SkRRect rr5;
    rr5.setRectRadii(rect, radii2);

    REPORTER_ASSERT(reporter, SkRRect::kComplex_Type == rr5.type());
    REPORTER_ASSERT(reporter, rr5.rect() == rect);

    for (int i = 0; i < 4; ++i) {
        REPORTER_ASSERT(reporter, radii2[i] == rr5.radii((SkRRect::Corner) i));
    }
//.........这里部分代码省略.........