C++ SList::popFrontRet方法代码示例

//
// createSkeleton: creates a skeleton graph
//
DynamicSkeleton& DynamicSPQRTree::createSkeleton(node vT) const
{
	DynamicSkeleton& S = *OGDF_NEW DynamicSkeleton(this, vT);

	SList<node> inMapV;

	for (edge eH : m_tNode_hEdges[vT])
	{
		node sH = eH->source();
		node tH = eH->target();

		edge& eM = m_skelEdge[eH];
		node& sM = m_mapV[sH];
		node& tM = m_mapV[tH];

		if (!sM) {
			sM = S.m_M.newNode();
			S.m_origNode[sM] = sH;
			inMapV.pushBack(sH);
		}

		if (!tM) {
			tM = S.m_M.newNode();
			S.m_origNode[tM] = tH;
			inMapV.pushBack(tH);
		}

		eM = S.m_M.newEdge(sM, tM);
		S.m_origEdge[eM] = eH;
	}

	while (!inMapV.empty()) m_mapV[inMapV.popFrontRet()] = nullptr;

	S.m_referenceEdge = m_tNode_hRefEdge[vT];
	if (S.m_referenceEdge) S.m_referenceEdge = m_skelEdge[S.m_referenceEdge];

	m_sk[vT] = &S;
	return S;
}

void DynamicSPQRForest::createSPQR (node vB) const
{
	Graph GC;
	NodeArray<node> origNode(GC,0);
	EdgeArray<edge> origEdge(GC,0);
	SListConstIterator<edge> iH;

	for (iH=m_bNode_hEdges[vB].begin(); iH.valid(); ++iH)
		m_htogc[(*iH)->source()] = m_htogc[(*iH)->target()] = 0;

	for (iH=m_bNode_hEdges[vB].begin(); iH.valid(); ++iH) {
		edge eH = *iH;
		node sH = eH->source();
		node tH = eH->target();
		node& sGC = m_htogc[sH];
		node& tGC = m_htogc[tH];
		if (!sGC) { sGC = GC.newNode(); origNode[sGC] = sH; }
		if (!tGC) { tGC = GC.newNode(); origNode[tGC] = tH; }
		origEdge[GC.newEdge(sGC,tGC)] = eH;
	}

	TricComp tricComp(GC);

	const GraphCopySimple& GCC = *tricComp.m_pGC;

	EdgeArray<node> partnerNode(GCC,0);
	EdgeArray<edge> partnerEdge(GCC,0);

	for (int i=0; i<tricComp.m_numComp; ++i) {
		const TricComp::CompStruct &C = tricComp.m_component[i];

		if (C.m_edges.empty()) continue;

		node vT = m_T.newNode();
		m_tNode_owner[vT] = vT;

		switch(C.m_type) {
			case TricComp::bond:
				m_tNode_type[vT] = PComp;
				m_bNode_numP[vB]++;
				break;
			case TricComp::polygon:
				m_tNode_type[vT] = SComp;
				m_bNode_numS[vB]++;
				break;
			case TricComp::triconnected:
				m_tNode_type[vT] = RComp;
				m_bNode_numR[vB]++;
				break;
		}

		for (ListConstIterator<edge> iGCC=C.m_edges.begin(); iGCC.valid(); ++iGCC) {
			edge eGCC = *iGCC;
			edge eH = GCC.original(eGCC);
			if (eH) eH = origEdge[eH];
			else {
				node uH = origNode[GCC.original(eGCC->source())];
				node vH = origNode[GCC.original(eGCC->target())];
				eH = m_H.newEdge(uH,vH);

				if (!partnerNode[eGCC]) {
					partnerNode[eGCC] = vT;
					partnerEdge[eGCC] = eH;
				}
				else {
					m_T.newEdge(partnerNode[eGCC],vT);
					m_hEdge_twinEdge[eH] = partnerEdge[eGCC];
					m_hEdge_twinEdge[partnerEdge[eGCC]] = eH;
				}
			}
			m_hEdge_position[eH] = m_tNode_hEdges[vT].pushBack(eH);
			m_hEdge_tNode[eH] = vT;
		}
	}

	m_bNode_SPQR[vB] = m_hEdge_tNode[origEdge[GC.firstEdge()]];
	m_tNode_hRefEdge[m_bNode_SPQR[vB]] = 0;

	SList<node> lT;
	lT.pushBack(m_bNode_SPQR[vB]);
	lT.pushBack(0);
	while (!lT.empty()) {
		node vT = lT.popFrontRet();
		node wT = lT.popFrontRet();
		for (ListConstIterator<edge> iH=m_tNode_hEdges[vT].begin(); iH.valid(); ++iH) {
			edge eH = *iH;
			edge fH = m_hEdge_twinEdge[eH];
			if (!fH) continue;
			node uT = m_hEdge_tNode[fH];
			if (uT==wT) m_tNode_hRefEdge[vT] = eH;
			else {
				lT.pushBack(uT);
				lT.pushBack(vT);
			}
		}
	}
}

edge DynamicSPQRTree::updateInsertedEdge(edge eG)
{
	SList<node> marked;
	node sH = m_gNode_hNode[eG->source()];
	node tH = m_gNode_hNode[eG->target()];
	for (adjEntry aH : sH->adjEdges) {
		edge fH = aH->theEdge();
		node vT = spqrproper(fH);
		if (fH->opposite(sH) == tH) {
			if (m_tNode_type[vT] == PComp) {
				DynamicSPQRForest::updateInsertedEdge(eG);
				if (m_sk[vT]) {
					edge eH = m_gEdge_hEdge[eG];
					edge fM = m_skelEdge[fH];
					node sM = fM->source();
					node tM = fM->target();
					if (eH->source() == m_sk[vT]->m_origNode[tM]) {
						node uM = sM; sM = tM; tM = uM;
					}
					m_skelEdge[eH] = m_sk[vT]->getGraph().newEdge(sM, tM);
					m_sk[vT]->m_origEdge[m_skelEdge[eH]] = eH;
				}
				return eG;
			}
			else if (!m_hEdge_twinEdge[fH]) {
				DynamicSPQRForest::updateInsertedEdge(eG);
				if (m_sk[vT]) {
					edge gH = m_hEdge_twinEdge[m_tNode_hEdges[m_hEdge_tNode[fH]].front()];
					m_skelEdge[gH] = m_skelEdge[fH];
					m_sk[vT]->m_origEdge[m_skelEdge[gH]] = gH;
				}
				return eG;
			}
			else {
				m_tNode_isMarked[vT] = true;
				marked.pushBack(vT);
			}
		}
		else {
			m_tNode_isMarked[vT] = true;
			marked.pushBack(vT);
		}
	}
	int count = 0;
	node found[2];
	for (adjEntry aH : tH->adjEdges) {
		edge fH = aH->theEdge();
		node vT = spqrproper(fH);
		if (!m_tNode_isMarked[vT]) continue;
		found[count++] = vT;
		m_tNode_isMarked[vT] = false;
	}
	while (!marked.empty()) m_tNode_isMarked[marked.popFrontRet()] = false;
	if (count == 0) {
		node rT;
		SList<node>& pT = findPathSPQR(sH, tH, rT);
		for (node vT : pT) {
			if (m_sk[vT]) {
				delete m_sk[vT];
				m_sk[vT] = nullptr;
			}
		}
		delete &pT;
	}
	else if (count == 1) {
		node vT = found[0];
		if (m_sk[vT]) {
			delete m_sk[vT];
			m_sk[vT] = nullptr;
		}
	}
	return DynamicSPQRForest::updateInsertedEdge(eG);
}

void GEMLayout::call(GraphAttributes &AG)
{
	const Graph &G = AG.constGraph();
	if(G.empty())
		return;

	// all edges straight-line
	AG.clearAllBends();

	GraphCopy GC;
	GC.createEmpty(G);

	// compute connected component of G
	NodeArray<int> component(G);
	int numCC = connectedComponents(G,component);

	// intialize the array of lists of nodes contained in a CC
	Array<List<node> > nodesInCC(numCC);

	for(node v : G.nodes)
		nodesInCC[component[v]].pushBack(v);

	EdgeArray<edge> auxCopy(G);
	Array<DPoint> boundingBox(numCC);

	int i;
	for(i = 0; i < numCC; ++i)
	{
		GC.initByNodes(nodesInCC[i],auxCopy);

		GraphCopyAttributes AGC(GC,AG);
		for(node vCopy : GC.nodes) {
			node vOrig = GC.original(vCopy);
			AGC.x(vCopy) = AG.x(vOrig);
			AGC.y(vCopy) = AG.y(vOrig);
		}

		SList<node> permutation;

		// initialize node data
		m_impulseX.init(GC,0);
		m_impulseY.init(GC,0);
		m_skewGauge.init(GC,0);
		m_localTemperature.init(GC,m_initialTemperature);

		// initialize other data
		m_globalTemperature = m_initialTemperature;
		m_barycenterX = 0;
		m_barycenterY = 0;
		for(node v : GC.nodes) {
			m_barycenterX += weight(v) * AGC.x(v);
			m_barycenterY += weight(v) * AGC.y(v);
		}
		m_cos = cos(m_oscillationAngle / 2.0);
		m_sin = sin(Math::pi / 2 + m_rotationAngle / 2.0);

		// main loop
		int counter = m_numberOfRounds;
		while(OGDF_GEOM_ET.greater(m_globalTemperature,m_minimalTemperature) && counter--) {

			// choose nodes by random permutations
			if(permutation.empty()) {
				for(node v : GC.nodes)
					permutation.pushBack(v);
				permutation.permute(m_rng);
			}
			node v = permutation.popFrontRet();

			// compute the impulse of node v
			computeImpulse(GC,AGC,v);

			// update node v
			updateNode(GC,AGC,v);

		}

		node vFirst = GC.firstNode();
		double minX = AGC.x(vFirst), maxX = AGC.x(vFirst),
			minY = AGC.y(vFirst), maxY = AGC.y(vFirst);

		for(node vCopy : GC.nodes) {
			node v = GC.original(vCopy);
			AG.x(v) = AGC.x(vCopy);
			AG.y(v) = AGC.y(vCopy);

			if(AG.x(v)-AG.width (v)/2 < minX) minX = AG.x(v)-AG.width(v) /2;
			if(AG.x(v)+AG.width (v)/2 > maxX) maxX = AG.x(v)+AG.width(v) /2;
			if(AG.y(v)-AG.height(v)/2 < minY) minY = AG.y(v)-AG.height(v)/2;
			if(AG.y(v)+AG.height(v)/2 > maxY) maxY = AG.y(v)+AG.height(v)/2;
		}

		minX -= m_minDistCC;
		minY -= m_minDistCC;

		for(node vCopy : GC.nodes) {
			node v = GC.original(vCopy);
			AG.x(v) -= minX;
			AG.y(v) -= minY;
		}

//.........这里部分代码省略.........

void PlanRep::expand(bool lowDegreeExpand)
{
	for(node v : nodes)
	{

		// Replace vertices with high degree by cages and
		// replace degree 4 vertices with two generalizations
		// adjacent in the embedding list by a cage.
		if ((v->degree() > 4)  && (typeOf(v) != Graph::dummy) && !lowDegreeExpand)
		{
			edge e;

			//Set the type of the node v. It remains in the graph
			// as one of the nodes of the expanded face.
			typeOf(v) = Graph::highDegreeExpander;

			// Scan the list of edges of v to find the adjacent edges of v
			// according to the planar embedding. All except one edge
			// will get a new adjacent node
			SList<edge> adjEdges;
			{forall_adj_edges(e,v)
				adjEdges.pushBack(e);
			}

			//The first edge remains at v. remove it from the list.
			e = adjEdges.popFrontRet();

			// Create the list of high degree expanders
			// We need degree(v)-1 of them to construct a face.
			// and set expanded Node to v
			setExpandedNode(v, v);
			SListPure<node> expander;
			for (int i = 0; i < v->degree()-1; i++)
			{
				node u = newNode();
				typeOf(u) = Graph::highDegreeExpander;
				setExpandedNode(u, v);
				expander.pushBack(u);
			}

			// We move the target node of each ingoing generalization of v to a new
			// node stored in expander.
			// Note that, for each such edge e, the target node of the original
			// edge is then different from the original of the target node of e
			// (the latter is 0 because u is a new (dummy) node)
			SListConstIterator<node> itn;

			NodeArray<adjEntry> ar(*this);

			itn = expander.begin();

			for (edge ei : adjEdges)
			{
				// Did we allocate enough dummy nodes?
				OGDF_ASSERT(itn.valid());

				if (ei->source() == v)
					moveSource(ei,*itn);
				else
					moveTarget(ei,*itn);
				ar[*itn] = (*itn)->firstAdj();
				++itn;
			}
			ar[v] = v->firstAdj();

			// Now introduce the circular list of new edges
			// forming the border of the merge face. Keep the embedding.
			adjEntry adjPrev = v->firstAdj();

//			cout <<endl << "INTRODUCING CIRCULAR EDGES" << endl;
			for (node n : expander)
			{
//				cout << adjPrev << " " << (*itn)->firstAdj() << endl;
				e = Graph::newEdge(adjPrev,n->firstAdj());
				setExpansionEdge(e, 2);//can be removed if edgetypes work properly

				setExpansion(e);
				setAssociation(e);

				typeOf(e) = association; //???

				if (!expandAdj(v))
					expandAdj(v) = e->adjSource();
				adjPrev = n->firstAdj();
			}

			e = newEdge(adjPrev,v->lastAdj());

			typeOf(e) = association; //???
			setExpansionEdge(e, 2);//can be removed if edgetypes work properly
			setAssociation(e);

		}//highdegree

		// Replace all vertices with degree > 2 by cages.
		else if (v->degree() >= 2  && typeOf(v) != Graph::dummy &&
				 lowDegreeExpand)
		{
			edge e;

//.........这里部分代码省略.........