本文整理汇总了C++中QSharedPointer::Count方法的典型用法代码示例。如果您正苦于以下问题：C++ QSharedPointer::Count方法的具体用法？C++ QSharedPointer::Count怎么用？C++ QSharedPointer::Count使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类QSharedPointer的用法示例。
在下文中一共展示了QSharedPointer::Count方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: AddToNewDetail
//.........这里部分代码省略.........
{
const QSharedPointer<VSpline> spline = data->GeometricObject<VSpline>(det.at(i).getId());
VPointF *p1 = new VPointF(spline->GetP1());
BiasRotatePoint(p1, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
//quint32 idP1 = data->AddGObject(p1);
VPointF p2 = VPointF(spline->GetP2());
BiasRotatePoint(&p2, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF p3 = VPointF(spline->GetP3());
BiasRotatePoint(&p3, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF *p4 = new VPointF(spline->GetP4());
BiasRotatePoint(p4, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
//quint32 idP4 = data->AddGObject(p4);
VSpline *spl = new VSpline(*p1, p2.toQPointF(), p3.toQPointF(), *p4, spline->GetKcurve(), 0,
Draw::Modeling);
idObject = data->AddGObject(spl);
VSpline *spl1 = new VSpline(*spl);
spl1->setMode(Draw::Modeling);
id = data->AddGObject(spl1);
VNodeSpline::Create(doc, data, id, idObject, Document::FullParse, Source::FromGui, idTool, tool);
delete p4;
delete p1;
}
}
break;
case (Tool::NodeSplinePath):
{
if (qFuzzyCompare(dx+1, 1) && qFuzzyCompare(dy+1, 1) && pRotate == 0)
{
id = det.at(i).getId();
}
else
{
VSplinePath *path = new VSplinePath();
path->setMode(Draw::Modeling);
const QSharedPointer<VSplinePath> splinePath = data->GeometricObject<VSplinePath>(det.at(i).getId());
qint32 k = splinePath->getMaxCountPoints();
for (qint32 i = 1; i <= splinePath->Count(); ++i)
{
VSpline spline(splinePath->at(i-1).P(), splinePath->at(i).P(),
splinePath->at(i-1).Angle2(), splinePath->at(i).Angle1(), splinePath->at(i-1).KAsm2(),
splinePath->at(i).KAsm1(), splinePath->getKCurve());
VPointF *p1 = new VPointF(spline.GetP1());
BiasRotatePoint(p1, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
//quint32 idP1 = data->AddGObject(p1);
--k;
VPointF p2 = VPointF(spline.GetP2());
BiasRotatePoint(&p2, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
VPointF p3 = VPointF(spline.GetP3());
BiasRotatePoint(&p3, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
VPointF *p4 = new VPointF(spline.GetP4());
BiasRotatePoint(p4, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
//quint32 idP4 = data->AddGObject(p4);
--k;
VSpline spl = VSpline(*p1, p2.toQPointF(), p3.toQPointF(), *p4, spline.GetKcurve());
if (i==1)
{
path->append(VSplinePoint(*p1, splinePath->at(i-1).KAsm1(), spl.GetAngle1()+180,
splinePath->at(i-1).KAsm2(), spl.GetAngle1()));
}
path->append(VSplinePoint(*p4, splinePath->at(i).KAsm1(), spl.GetAngle2(),
splinePath->at(i).KAsm2(), spl.GetAngle2()+180));
delete p4;
delete p1;
}
while (k>=0)
{
data->getNextId();
--k;
}
idObject = data->AddGObject(path);
VSplinePath *path1 = new VSplinePath(*path);
path1->setMode(Draw::Modeling);
id = data->AddGObject(path1);
VNodeSplinePath::Create(doc, data, id, idObject, Document::FullParse, Source::FromGui, idTool, tool);
}
}
break;
default:
qDebug()<<"May be wrong tool type!!! Ignoring."<<Q_FUNC_INFO;
break;
}
newDetail.append(VNodeDetail(id, det.at(i).getTypeTool(), NodeDetail::Contour));
}示例2: UpdatePoints
/**
* @brief UpdatePoints update data for united details.
* @param idDetail id united detail.
* @param data container with variables.
* @param det detail what we union.
* @param i index node in detail.
* @param idCount count updated or created objects.
* @param dx bias node x axis.
* @param dy bias node y axis.
* @param pRotate point rotation.
* @param angle angle rotation.
*/
void VToolUnionDetails::UpdatePoints(const quint32 &idDetail, VContainer *data, const VDetail &det, const int &i,
quint32 &idCount, const qreal &dx, const qreal &dy, const quint32 &pRotate,
const qreal &angle)
{
switch (det.at(i).getTypeTool())
{
case (Tool::NodePoint):
{
if (qFuzzyCompare(dx+1, 1) == false || qFuzzyCompare(dy+1, 1) == false || pRotate != 0)
{
VPointF *point = new VPointF(*data->GeometricObject<VPointF>(det.at(i).getId()));
point->setMode(Draw::Modeling);
BiasRotatePoint(point, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
++idCount;
data->UpdateGObject(idDetail+idCount, point);
++idCount;
}
}
break;
case (Tool::NodeArc):
{
if (qFuzzyCompare(dx+1, 1) == false || qFuzzyCompare(dy+1, 1) == false || pRotate != 0)
{
const QSharedPointer<VArc> arc = data->GeometricObject<VArc>(det.at(i).getId());
VPointF p1 = VPointF(arc->GetP1());
BiasRotatePoint(&p1, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF p2 = VPointF(arc->GetP2());
BiasRotatePoint(&p2, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF *center = new VPointF(arc->GetCenter());
BiasRotatePoint(center, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
QLineF l1(center->toQPointF(), p1.toQPointF());
QLineF l2(center->toQPointF(), p2.toQPointF());
++idCount;
center->setMode(Draw::Modeling);
data->UpdateGObject(idDetail+idCount, center);
VArc *arc1 = new VArc(*center, arc->GetRadius(), arc->GetFormulaRadius(), l1.angle(),
QString().setNum(l1.angle()), l2.angle(), QString().setNum(l2.angle()));
arc1->setMode(Draw::Modeling);
++idCount;
data->UpdateGObject(idDetail+idCount, arc1);
++idCount;
}
}
break;
case (Tool::NodeSpline):
{
if (qFuzzyCompare(dx+1, 1) == false || qFuzzyCompare(dy+1, 1) == false || pRotate != 0)
{
const QSharedPointer<VSpline> spline = data->GeometricObject<VSpline>(det.at(i).getId());
VPointF *p1 = new VPointF(spline->GetP1());
BiasRotatePoint(p1, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
++idCount;
data->UpdateGObject(idDetail+idCount, p1);
VPointF p2 = VPointF(spline->GetP2());
BiasRotatePoint(&p2, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF p3 = VPointF(spline->GetP3());
BiasRotatePoint(&p3, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF *p4 = new VPointF(spline->GetP4());
BiasRotatePoint(p4, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
++idCount;
data->UpdateGObject(idDetail+idCount, p4);
VSpline *spl = new VSpline(*p1, p2.toQPointF(), p3.toQPointF(), *p4, spline->GetKcurve(), 0,
Draw::Modeling);
++idCount;
data->UpdateGObject(idDetail+idCount, spl);
++idCount;
}
}
break;
case (Tool::NodeSplinePath):
{
if (qFuzzyCompare(dx+1, 1) == false || qFuzzyCompare(dy+1, 1) == false || pRotate != 0)
{
VSplinePath *path = new VSplinePath();
path->setMode(Draw::Modeling);
const QSharedPointer<VSplinePath> splinePath = data->GeometricObject<VSplinePath>(det.at(i).getId());
SCASSERT(splinePath != nullptr);
//.........这里部分代码省略.........