本文整理汇总了C++中Ptr::AddEnb方法的典型用法代码示例。如果您正苦于以下问题：C++ Ptr::AddEnb方法的具体用法？C++ Ptr::AddEnb怎么用？C++ Ptr::AddEnb使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类Ptr的用法示例。
在下文中一共展示了Ptr::AddEnb方法的1个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: packetSinkHelper
void
EpcS1uDlTestCase::DoRun ()
{
Ptr<PointToPointEpcHelper> epcHelper = CreateObject<PointToPointEpcHelper> ();
Ptr<Node> pgw = epcHelper->GetPgwNode ();
// allow jumbo packets
Config::SetDefault ("ns3::CsmaNetDevice::Mtu", UintegerValue (30000));
Config::SetDefault ("ns3::PointToPointNetDevice::Mtu", UintegerValue (30000));
epcHelper->SetAttribute ("S1uLinkMtu", UintegerValue (30000));
// Create a single RemoteHost
NodeContainer remoteHostContainer;
remoteHostContainer.Create (1);
Ptr<Node> remoteHost = remoteHostContainer.Get (0);
InternetStackHelper internet;
internet.Install (remoteHostContainer);
// Create the internet
PointToPointHelper p2ph;
p2ph.SetDeviceAttribute ("DataRate", DataRateValue (DataRate ("100Gb/s")));
NetDeviceContainer internetDevices = p2ph.Install (pgw, remoteHost);
Ipv4AddressHelper ipv4h;
ipv4h.SetBase ("1.0.0.0", "255.0.0.0");
ipv4h.Assign (internetDevices);
// setup default gateway for the remote hosts
Ipv4StaticRoutingHelper ipv4RoutingHelper;
Ptr<Ipv4StaticRouting> remoteHostStaticRouting = ipv4RoutingHelper.GetStaticRouting (remoteHost->GetObject<Ipv4> ());
// hardcoded UE addresses for now
remoteHostStaticRouting->AddNetworkRouteTo (Ipv4Address ("7.0.0.0"), Ipv4Mask ("255.255.255.0"), 1);
NodeContainer enbs;
uint16_t cellIdCounter = 0;
for (std::vector<EnbDlTestData>::iterator enbit = m_enbDlTestData.begin ();
enbit < m_enbDlTestData.end ();
++enbit)
{
Ptr<Node> enb = CreateObject<Node> ();
enbs.Add (enb);
// we test EPC without LTE, hence we use:
// 1) a CSMA network to simulate the cell
// 2) a raw socket opened on the CSMA device to simulate the LTE socket
uint16_t cellId = ++cellIdCounter;
NodeContainer ues;
ues.Create (enbit->ues.size ());
NodeContainer cell;
cell.Add (ues);
cell.Add (enb);
CsmaHelper csmaCell;
NetDeviceContainer cellDevices = csmaCell.Install (cell);
// the eNB's CSMA NetDevice acting as an LTE NetDevice.
Ptr<NetDevice> enbDevice = cellDevices.Get (cellDevices.GetN () - 1);
// Note that the EpcEnbApplication won't care of the actual NetDevice type
epcHelper->AddEnb (enb, enbDevice, cellId);
// Plug test RRC entity
Ptr<EpcEnbApplication> enbApp = enb->GetApplication (0)->GetObject<EpcEnbApplication> ();
NS_ASSERT_MSG (enbApp != 0, "cannot retrieve EpcEnbApplication");
Ptr<EpcTestRrc> rrc = CreateObject<EpcTestRrc> ();
rrc->SetS1SapProvider (enbApp->GetS1SapProvider ());
enbApp->SetS1SapUser (rrc->GetS1SapUser ());
// we install the IP stack on UEs only
InternetStackHelper internet;
internet.Install (ues);
// assign IP address to UEs, and install applications
for (uint32_t u = 0; u < ues.GetN (); ++u)
{
Ptr<NetDevice> ueLteDevice = cellDevices.Get (u);
Ipv4InterfaceContainer ueIpIface = epcHelper->AssignUeIpv4Address (NetDeviceContainer (ueLteDevice));
Ptr<Node> ue = ues.Get (u);
// disable IP Forwarding on the UE. This is because we use
// CSMA broadcast MAC addresses for this test. The problem
// won't happen with a LteUeNetDevice.
ue->GetObject<Ipv4> ()->SetAttribute ("IpForward", BooleanValue (false));
uint16_t port = 1234;
PacketSinkHelper packetSinkHelper ("ns3::UdpSocketFactory", InetSocketAddress (Ipv4Address::GetAny (), port));
ApplicationContainer apps = packetSinkHelper.Install (ue);
apps.Start (Seconds (1.0));
apps.Stop (Seconds (10.0));
enbit->ues[u].serverApp = apps.Get (0)->GetObject<PacketSink> ();
Time interPacketInterval = Seconds (0.01);
//.........这里部分代码省略.........