本文整理汇总了C++中PNEANet::BegEAIntI方法的典型用法代码示例。如果您正苦于以下问题：C++ PNEANet::BegEAIntI方法的具体用法？C++ PNEANet::BegEAIntI怎么用？C++ PNEANet::BegEAIntI使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类PNEANet的用法示例。
在下文中一共展示了PNEANet::BegEAIntI方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: ManipulateNodeEdgeAttributes
//.........这里部分代码省略.........
}
for (i = 0; i <NNodes; i++) {
Graph->AddIntAttrDatN(i, 70, attr2);
}
{
TFOut FOut(FName);
Graph->Save(FOut);
FOut.Flush();
}
{
TFIn FIn(FName);
Graph1 = TNEANet::Load(FIn);
}
int total = 0;
for (TNEANet::TAIntI NI = Graph1->BegNAIntI(attr2);
NI < Graph1->EndNAIntI(attr2); NI++) {
total += NI.GetDat();
}
printf("Average: %i (should be 70)\n", total/NNodes);
Graph1->Clr();
// Test vertical int iterator for edge
Graph->AddIntAttrDatE(3, 3*2, attr2);
Graph->AddIntAttrDatE(55, 55*2, attr2);
Graph->AddIntAttrDatE(705, 705*2, attr2);
Graph->AddIntAttrDatE(905, 905*2, attr2);
int EdgeId = 0;
for (TNEANet::TAIntI EI = Graph->BegEAIntI(attr2);
EI < Graph->EndEAIntI(attr2); EI++) {
if (EI.GetDat() != TInt::Mn) {
printf("E Attribute: %s, Edge: %i, Val: %i\n", attr2(), EdgeId, EI.GetDat()());
EdgeId++;
}
}
// Test vertical flt iterator for edge
Graph->AddFltAttrE(attr3, 0.00);
Graph->AddFltAttrDatE(5, 4.41, attr3);
Graph->AddFltAttrDatE(50, 3.718, attr3);
Graph->AddFltAttrDatE(300, 151.0, attr3);
Graph->AddFltAttrDatE(653, 654, attr3);
EdgeId = 0;
for (TNEANet::TAFltI EI = Graph->BegEAFltI(attr3);
EI < Graph->EndEAFltI(attr3); EI++) {
// Check if defaults are set to 0.
if (EI.GetDat() != 0.00) {
printf("E Attribute: %s, Edge: %i, Val: %f\n", attr3(), EdgeId, EI.GetDat()());
EdgeId++;
}
}
// Test vertical str iterator for edge
Graph->AddStrAttrDatE(10, "abc", attr1);
Graph->AddStrAttrDatE(20, "def", attr1);
Graph->AddStrAttrDatE(400, "ghi", attr1);
// this does not show since ""=null
Graph->AddStrAttrDatE(455, "", attr1);
EdgeId = 0;
for (TNEANet::TAStrI EI = Graph->BegEAStrI(attr1);
EI < Graph->EndEAStrI(attr1); EI++) {示例2: FOut
//.........这里部分代码省略.........
{
TFOut FOut(FName);
Graph->Save(FOut);
FOut.Flush();
}
{
TFIn FIn(FName);
Graph1 = TNEANet::Load(FIn);
}
int total = 0;
for (TNEANet::TAIntI NI = Graph1->BegNAIntI(attr2);
NI < Graph1->EndNAIntI(attr2); NI++) {
total += NI.GetDat();
}
ASSERT_EQ(expectedTotal, total);
Graph1->Clr();
// Test vertical int iterator for edge
Graph->AddIntAttrDatE(3, 3*2, attr2);
Graph->AddIntAttrDatE(55, 55*2, attr2);
Graph->AddIntAttrDatE(705, 705*2, attr2);
Graph->AddIntAttrDatE(905, 905*2, attr2);
EXPECT_EQ(3*2, Graph->GetEAIntI(attr2, 3).GetDat());
EXPECT_EQ(55*2, Graph->GetEAIntI(attr2, 55).GetDat());
int EdgeId = 0;
int DefEdges = 0;
TAIntIV.Clr();
for (TNEANet::TAIntI EI = Graph->BegEAIntI(attr2);
EI < Graph->EndEAIntI(attr2); EI++) {
if (EI.GetDat() != TInt::Mn) {
TAIntIV.Add(EI.GetDat());
EdgeId++;
} else {
DefEdges++;
}
}
EXPECT_EQ(4, EdgeId);
EXPECT_EQ(NEdges - 4, DefEdges);
TAIntIV.Sort();
EXPECT_EQ(3*2, TAIntIV[0]);
EXPECT_EQ(55*2, TAIntIV[1]);
EXPECT_EQ(705*2, TAIntIV[2]);
EXPECT_EQ(905*2, TAIntIV[3]);
// Test vertical flt iterator for edge
Graph->AddFltAttrE(attr3, 0.00);
Graph->AddFltAttrDatE(5, 4.41, attr3);
Graph->AddFltAttrDatE(50, 3.718, attr3);
Graph->AddFltAttrDatE(300, 151.0, attr3);
Graph->AddFltAttrDatE(653, 654, attr3);
EXPECT_EQ(4.41, Graph->GetEAFltI(attr3, 5).GetDat());
EXPECT_EQ(3.718, Graph->GetEAFltI(attr3, 50).GetDat());
EdgeId = 0;
DefEdges = 0;
TAFltIV.Clr();
for (TNEANet::TAFltI EI = Graph->BegEAFltI(attr3);