C++ PNEANet::AddFltAttrDatE方法代码示例

TEST(TNEANet, AddEdgeAttributeError) {
  PNEANet Graph;
  Graph = TNEANet::New();

  TStr StrAttr("name");
  TStr FltAttr("weight");
  TStr IntAttr("test");

  Graph->AddStrAttrE(StrAttr);
  Graph->AddFltAttrE(FltAttr);
  Graph->AddIntAttrE(IntAttr);
  int NumEdges = 5;
  for (int i = 0; i < NumEdges + 1; i++) {
    Graph->AddNode(i);
  }
  for (int i = 0; i < NumEdges; i++) {
    Graph->AddEdge(i, i+1, i);
    Graph->AddIntAttrDatE(i, TInt(i), IntAttr);
    Graph->AddFltAttrDatE(i, TFlt(i), FltAttr);
    TInt Val(i);
    Graph->AddStrAttrDatE(i, Val.GetStr(), StrAttr);
  }
  Graph->DelNode(0);
  for (int j = 1; j < NumEdges; j++) {
    ASSERT_EQ(Graph->GetIntAttrDatE(j, IntAttr), TInt(j));
    ASSERT_EQ(Graph->GetFltAttrDatE(j, FltAttr), TFlt(j));
    TInt Val(j);
    ASSERT_EQ(Graph->GetStrAttrDatE(j, StrAttr), Val.GetStr());
  }
}

//.........这里部分代码省略.........
  }

  {
    TFIn FIn(FName);
    Graph1 = TNEANet::Load(FIn);
  }

  int total = 0;
  for (TNEANet::TAIntI NI = Graph1->BegNAIntI(attr2);
    NI < Graph1->EndNAIntI(attr2); NI++) {
    total += NI.GetDat();
  }

  printf("Average: %i (should be 70)\n", total/NNodes);

  Graph1->Clr();

  // Test vertical int iterator for edge
  Graph->AddIntAttrDatE(3, 3*2, attr2);
  Graph->AddIntAttrDatE(55, 55*2, attr2);
  Graph->AddIntAttrDatE(705, 705*2, attr2);
  Graph->AddIntAttrDatE(905, 905*2, attr2);
  int EdgeId = 0;
  for (TNEANet::TAIntI EI = Graph->BegEAIntI(attr2);
    EI < Graph->EndEAIntI(attr2); EI++) {
    if (EI.GetDat() != TInt::Mn) {
       printf("E Attribute: %s, Edge: %i, Val: %i\n", attr2(), EdgeId, EI.GetDat()());
       EdgeId++;
    }
  } 
  
  // Test vertical flt iterator for edge
  Graph->AddFltAttrE(attr3, 0.00);
  Graph->AddFltAttrDatE(5, 4.41, attr3);
  Graph->AddFltAttrDatE(50, 3.718, attr3);
  Graph->AddFltAttrDatE(300, 151.0, attr3);
  Graph->AddFltAttrDatE(653, 654, attr3);
  EdgeId = 0;
  for (TNEANet::TAFltI EI = Graph->BegEAFltI(attr3);
    EI < Graph->EndEAFltI(attr3); EI++) {
    // Check if defaults are set to 0.
    if (EI.GetDat() != 0.00) {
      printf("E Attribute: %s, Edge: %i, Val: %f\n", attr3(), EdgeId, EI.GetDat()());
      EdgeId++;
    } 
  }

  // Test vertical str iterator for edge
  Graph->AddStrAttrDatE(10, "abc", attr1);
  Graph->AddStrAttrDatE(20, "def", attr1);
  Graph->AddStrAttrDatE(400, "ghi", attr1);
  // this does not show since ""=null
  Graph->AddStrAttrDatE(455, "", attr1);
  EdgeId = 0;
  for (TNEANet::TAStrI EI = Graph->BegEAStrI(attr1);
    EI < Graph->EndEAStrI(attr1); EI++) {
    if (EI.GetDat() != TStr::GetNullStr()) {
        printf("E Attribute: %s, Edge: %i, Val: %s\n", attr1(), EdgeId, EI.GetDat()());
	EdgeId++;
    }
  } 


  // Test vertical iterator over many types (must skip default/deleted attr) 
  int EId = 55;
  Graph->AddStrAttrDatE(EId, "aaa", attr1);

PNEANet KNNJaccardParallel(PNGraph Graph,int K) {
  PNEANet KNN = TNEANet::New();
  TIntV NIdV;
  Graph->GetNIdV (NIdV);
  int size = NIdV.Len();
  for (int ind = 0; ind < size; ind++) {
    KNN->AddNode(NIdV[ind]);
  }
  KNN->AddFltAttrE("sim");
  TVec<TVec<TPair<TFlt, TInt>, int >, int > TopKList;
  TVec<TVec<TPair<TFlt, TInt>, int >, int > ThTopK; // for each thread
  TIntV NodeList;
  TIntV ThNodeList;// for each thread
  int NumThreads = omp_get_max_threads();
  omp_set_num_threads(NumThreads);
  #pragma omp parallel private(ThNodeList, ThTopK)
  {
    TIntV* Neighbors_old = new TIntV();
    TIntV* Neighbors = new TIntV();
    TIntV* temp;

    #pragma omp for schedule(dynamic,1000)
    for (int ind = 0; ind < size; ind++) {
      TNGraph::TNodeI NI = Graph->GetNI(NIdV[ind]);
      if (NI.GetInDeg() > 0) {
        continue;
      }
      if (NI.GetOutDeg() == 0) {
        continue;
      }

      TVec<TPair<TFlt, TInt>, int > TopK;
      for (int i = 0; i < K; i++) {
          TopK.Add(TPair<TFlt,TInt>(0.0, -1));
      }

      Neighbors->Clr(false);
      Neighbors_old->Clr(false);

      for (int i = 0; i < NI.GetOutDeg(); i++) {
        TNGraph::TNodeI Inst_NI = Graph->GetNI(NI.GetOutNId(i));
        MergeNbrs(Neighbors, Neighbors_old, Inst_NI);

        temp = Neighbors_old;
        temp->Clr(false);
        Neighbors_old = Neighbors;
        Neighbors = temp;
      }

      // Swap neighbors and Neighbors_old

      temp = Neighbors_old;
      Neighbors_old = Neighbors;
      Neighbors = temp;
      for(int j = 0; j< Neighbors->Len(); j++) {

        TNGraph::TNodeI Auth_NI = Graph->GetNI((*Neighbors)[j]);

        float similarity = JaccardSim(NI, Auth_NI);
        if (TopK[K-1].GetVal1() < similarity) {
          int index = 0;
          for (int i = K-2; i >= 0; i--)
            if (TopK[i].GetVal1() < similarity) {
              TopK.SetVal(i+1, TopK[i]);
            } else {
              index = i+1;
              break;
            }
          TopK.SetVal(index, TPair<TFlt, TInt>(similarity, (*Neighbors)[j]));
        }
      }

      ThTopK.Add(TopK);
      ThNodeList.Add(NIdV[ind]);

//    if (ct%10000 == 0)
//    	cout<<ct<<" avg neighbor degree = "<<sum_neighbors*1.0/ct<<" "<<currentDateTime()<<endl;

    }
    #pragma omp critical
    {
      for (int j = 0; j < ThTopK.Len(); j++) {
        TopKList.Add(ThTopK[j]);
        NodeList.Add(ThNodeList[j]);
      }
    }
	}

  int size2 = NodeList.Len();
  for (int i= 0; i < size2 ; i++) {

    for (int j = 0; j < K; j++) {
      if (TopKList[i][j].GetVal2() <= -1) {
        break;
      }
      int EId = KNN->AddEdge(NodeList[i], TopKList[i][j].GetVal2());
      KNN->AddFltAttrDatE(EId, TopKList[i][j].GetVal1(), "sim");
    }
  }
  return KNN;
//.........这里部分代码省略.........

PNEANet KNNJaccard(PNGraph Graph, int K) {
  PNEANet KNN = TNEANet::New();

  int sum_neighbors = 0;
  int ct;
  int end;
  end = Graph->GetNodes();
  TIntV* Neighbors_old = new TIntV();
  TIntV* Neighbors = new TIntV();
  TIntV* temp;
  TIntV NIdV;
  Graph->GetNIdV (NIdV);
  int size = NIdV.Len();
  for (int ind = 0; ind < size; ind++) {
    KNN->AddNode(NIdV[ind]);
  }
  KNN->AddFltAttrE("sim");

  for (int ind = 0; ind < size; ind++) {
    TNGraph::TNodeI NI = Graph->GetNI(NIdV[ind]);
    if (NI.GetInDeg() > 0) {
      continue;
    }
    if (NI.GetOutDeg() == 0) {
      continue;
    }
    ct ++;

    TVec<TPair<TFlt, TInt> > TopK;
    for (int i = 0; i < K; i++) {
      TopK.Add(TPair<TFlt,TInt>(0.0, -1));
    }

    Neighbors->Clr(false);
    Neighbors_old->Clr(false);

    for (int i = 0; i < NI.GetOutDeg(); i++) {
      TNGraph::TNodeI Inst_NI = Graph->GetNI(NI.GetOutNId(i));
      MergeNbrs(Neighbors, Neighbors_old, Inst_NI);

      temp = Neighbors_old;
      temp->Clr(false);
      Neighbors_old = Neighbors;
      Neighbors = temp;
    }
    int num = Neighbors_old->Len();
    sum_neighbors += num;

    //Swap neighbors and Neighbors_old

    temp = Neighbors_old;
    Neighbors_old = Neighbors;
    Neighbors = temp;
    for (int j = 0; j< Neighbors->Len(); j++) {

      TNGraph::TNodeI Auth_NI = Graph->GetNI((*Neighbors)[j]);

      float similarity = JaccardSim(NI, Auth_NI);
      if (TopK[K-1].GetVal1() < similarity) {
        int index = 0;
        for (int i = K-2; i >= 0; i--)
          if (TopK[i].GetVal1() < similarity) {
            TopK.SetVal(i+1, TopK[i]);
          } else {
            index = i+1;
            break;
          }
        TopK.SetVal(index, TPair<TFlt, TInt>(similarity, (*Neighbors)[j]));
      }
    }

    for (int i = 0; i < K; i++) {
      int EId = KNN->AddEdge(NI.GetId(), TopK[i].GetVal2());
      KNN->AddFltAttrDatE(EId, TopK[i].GetVal1(), "sim");
    }

//    if (ct%10000 == 0)
//    	cout<<ct<<" avg neighbor degree = "<<sum_neighbors*1.0/ct<<" "<<currentDateTime()<<endl;

  }

  return KNN;
}

//.........这里部分代码省略.........

  // Test vertical int iterator for edge
  Graph->AddIntAttrDatE(3, 3*2, attr2);
  Graph->AddIntAttrDatE(55, 55*2, attr2);
  Graph->AddIntAttrDatE(705, 705*2, attr2);
  Graph->AddIntAttrDatE(905, 905*2, attr2);

  EXPECT_EQ(3*2, Graph->GetEAIntI(attr2, 3).GetDat());
  EXPECT_EQ(55*2, Graph->GetEAIntI(attr2, 55).GetDat());

  int EdgeId = 0;
  int DefEdges = 0;
  TAIntIV.Clr();
  for (TNEANet::TAIntI EI = Graph->BegEAIntI(attr2);
    EI < Graph->EndEAIntI(attr2); EI++) {
    if (EI.GetDat() != TInt::Mn) {
      TAIntIV.Add(EI.GetDat());
      EdgeId++;
    } else {
      DefEdges++;
    }
  } 

  EXPECT_EQ(4, EdgeId);
  EXPECT_EQ(NEdges - 4, DefEdges);
  TAIntIV.Sort();
  EXPECT_EQ(3*2, TAIntIV[0]);
  EXPECT_EQ(55*2, TAIntIV[1]);
  EXPECT_EQ(705*2, TAIntIV[2]);
  EXPECT_EQ(905*2, TAIntIV[3]);
   
  // Test vertical flt iterator for edge
  Graph->AddFltAttrE(attr3, 0.00);
  Graph->AddFltAttrDatE(5, 4.41, attr3);
  Graph->AddFltAttrDatE(50, 3.718, attr3);
  Graph->AddFltAttrDatE(300, 151.0, attr3);
  Graph->AddFltAttrDatE(653, 654, attr3);

  EXPECT_EQ(4.41, Graph->GetEAFltI(attr3, 5).GetDat());
  EXPECT_EQ(3.718, Graph->GetEAFltI(attr3, 50).GetDat());

  EdgeId = 0;
  DefEdges = 0;
  TAFltIV.Clr();

  for (TNEANet::TAFltI EI = Graph->BegEAFltI(attr3);
    EI < Graph->EndEAFltI(attr3); EI++) {
    // Check if defaults are set to 0.
    if (EI.GetDat() != 0.00) {
      TAFltIV.Add(EI.GetDat());
      EdgeId++;
    } else {
      DefEdges++;
    }
  }

  EXPECT_EQ(4, EdgeId);
  EXPECT_EQ(NEdges - 4, DefEdges);
  TAFltIV.Sort();
  EXPECT_EQ(3.718, TAFltIV[0]);
  EXPECT_EQ(4.41, TAFltIV[1]);
  EXPECT_EQ(151.0, TAFltIV[2]);
  EXPECT_EQ(654.0, TAFltIV[3]);

  // Test vertical str iterator for edge
  Graph->AddStrAttrDatE(10, "abc", attr1);