本文整理汇总了C++中OplogReader::resetCursor方法的典型用法代码示例。如果您正苦于以下问题：C++ OplogReader::resetCursor方法的具体用法？C++ OplogReader::resetCursor怎么用？C++ OplogReader::resetCursor使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类OplogReader的用法示例。
在下文中一共展示了OplogReader::resetCursor方法的3个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: _initialSyncOplogApplication
//.........这里部分代码省略.........
replSetForceInitialSyncFailure = f-1;
log() << "replSet test code invoked, replSetForceInitialSyncFailure" << rsLog;
throw DBException("forced error",0);
}
log() << "replSet we are now primary" << rsLog;
throw DBException("primary changed",0);
}
if( ts >= applyGTE ) { // optimes before we started copying need not be applied.
bool failedUpdate = syncApply(o);
if( failedUpdate ) {
// we don't have the object yet, which is possible on initial sync. get it.
log() << "replSet info adding missing object" << endl; // rare enough we can log
if( !missingObjReader.connect(hn) ) { // ok to call more than once
log() << "replSet initial sync fails, couldn't connect to " << hn << endl;
return false;
}
const char *ns = o.getStringField("ns");
BSONObj query = BSONObjBuilder().append(o.getObjectField("o2")["_id"]).obj(); // might be more than just _id in the update criteria
BSONObj missingObj;
try {
missingObj = missingObjReader.findOne(
ns,
query );
} catch(...) {
log() << "replSet assertion fetching missing object" << endl;
throw;
}
if( missingObj.isEmpty() ) {
log() << "replSet missing object not found on source. presumably deleted later in oplog" << endl;
log() << "replSet o2: " << o.getObjectField("o2").toString() << endl;
log() << "replSet o firstfield: " << o.getObjectField("o").firstElementFieldName() << endl;
}
else {
Client::Context ctx(ns);
try {
DiskLoc d = theDataFileMgr.insert(ns, (void*) missingObj.objdata(), missingObj.objsize());
assert( !d.isNull() );
} catch(...) {
log() << "replSet assertion during insert of missing object" << endl;
throw;
}
// now reapply the update from above
bool failed = syncApply(o);
if( failed ) {
log() << "replSet update still fails after adding missing object " << ns << endl;
assert(false);
}
}
}
}
_logOpObjRS(o); /* with repl sets we write the ops to our oplog too */
}
if ( ++n % 1000 == 0 ) {
time_t now = time(0);
if (now - start > 10) {
// simple progress metering
log() << "replSet initialSyncOplogApplication applied " << n << " operations, synced to "
<< ts.toStringPretty() << rsLog;
start = now;
}
}
if ( ts > minValid ) {
break;
}
getDur().commitIfNeeded();
}
catch (DBException& e) {
// skip duplicate key exceptions
if( e.getCode() == 11000 || e.getCode() == 11001 ) {
continue;
}
// handle cursor not found (just requery)
if( e.getCode() == 13127 ) {
log() << "replSet requerying oplog after cursor not found condition, ts: " << ts.toStringPretty() << endl;
r.resetCursor();
r.tailingQueryGTE(rsoplog, ts);
if( r.haveCursor() ) {
continue;
}
}
// TODO: handle server restart
if( ts <= minValid ) {
// didn't make it far enough
log() << "replSet initial sync failing, error applying oplog : " << e.toString() << rsLog;
return false;
}
// otherwise, whatever
break;
}
}
return true;
}示例2: lk
bool replset::InitialSync::oplogApplication(OplogReader& r, const Member* source,
const OpTime& applyGTE, const OpTime& minValid) {
const string hn = source->fullName();
try {
r.tailingQueryGTE( rsoplog, applyGTE );
if ( !r.haveCursor() ) {
log() << "replSet initial sync oplog query error" << rsLog;
return false;
}
{
if( !r.more() ) {
sethbmsg("replSet initial sync error reading remote oplog");
log() << "replSet initial sync error remote oplog (" << rsoplog << ") on host " << hn << " is empty?" << rsLog;
return false;
}
bo op = r.next();
OpTime t = op["ts"]._opTime();
r.putBack(op);
if( op.firstElementFieldName() == string("$err") ) {
log() << "replSet initial sync error querying " << rsoplog << " on " << hn << " : " << op.toString() << rsLog;
return false;
}
uassert( 13508 , str::stream() << "no 'ts' in first op in oplog: " << op , !t.isNull() );
if( t > applyGTE ) {
sethbmsg(str::stream() << "error " << hn << " oplog wrapped during initial sync");
log() << "replSet initial sync expected first optime of " << applyGTE << rsLog;
log() << "replSet initial sync but received a first optime of " << t << " from " << hn << rsLog;
return false;
}
sethbmsg(str::stream() << "initial oplog application from " << hn << " starting at "
<< t.toStringPretty() << " to " << minValid.toStringPretty());
}
}
catch(DBException& e) {
log() << "replSet initial sync failing: " << e.toString() << rsLog;
return false;
}
/* we lock outside the loop to avoid the overhead of locking on every operation. */
writelock lk("");
// todo : use exhaust
OpTime ts;
time_t start = time(0);
unsigned long long n = 0;
int fails = 0;
while( ts < minValid ) {
try {
// There are some special cases with initial sync (see the catch block), so we
// don't want to break out of this while until we've reached minvalid. Thus, we'll
// keep trying to requery.
if( !r.more() ) {
OCCASIONALLY log() << "replSet initial sync oplog: no more records" << endl;
sleepsecs(1);
r.resetCursor();
r.tailingQueryGTE(rsoplog, theReplSet->lastOpTimeWritten);
if ( !r.haveCursor() ) {
if (fails++ > 30) {
log() << "replSet initial sync tried to query oplog 30 times, giving up" << endl;
return false;
}
}
continue;
}
BSONObj o = r.nextSafe(); /* note we might get "not master" at some point */
ts = o["ts"]._opTime();
{
if( (source->state() != MemberState::RS_PRIMARY &&
source->state() != MemberState::RS_SECONDARY) ||
replSetForceInitialSyncFailure ) {
int f = replSetForceInitialSyncFailure;
if( f > 0 ) {
replSetForceInitialSyncFailure = f-1;
log() << "replSet test code invoked, replSetForceInitialSyncFailure" << rsLog;
throw DBException("forced error",0);
}
log() << "replSet we are now primary" << rsLog;
throw DBException("primary changed",0);
}
applyOp(o, applyGTE);
}
if ( ++n % 1000 == 0 ) {
time_t now = time(0);
if (now - start > 10) {
// simple progress metering
log() << "replSet initialSyncOplogApplication applied " << n << " operations, synced to "
<< ts.toStringPretty() << rsLog;
start = now;
//.........这里部分代码省略.........
示例3: initialSyncOplogApplication
//.........这里部分代码省略.........
return false;
}
uassert( 13508 , str::stream() << "no 'ts' in first op in oplog: " << op , !t.isNull() );
if( t > applyGTE ) {
sethbmsg(str::stream() << "error " << hn << " oplog wrapped during initial sync");
log() << "replSet initial sync expected first optime of " << applyGTE << rsLog;
log() << "replSet initial sync but received a first optime of " << t << " from " << hn << rsLog;
return false;
}
sethbmsg(str::stream() << "initial oplog application from " << hn << " starting at "
<< t.toStringPretty() << " to " << minValid.toStringPretty());
}
}
catch(DBException& e) {
log() << "replSet initial sync failing: " << e.toString() << rsLog;
return false;
}
/* we lock outside the loop to avoid the overhead of locking on every operation. */
writelock lk("");
// todo : use exhaust
OpTime ts;
time_t start = time(0);
unsigned long long n = 0;
while( 1 ) {
try {
if( !r.more() )
break;
BSONObj o = r.nextSafe(); /* note we might get "not master" at some point */
{
ts = o["ts"]._opTime();
/* if we have become primary, we dont' want to apply things from elsewhere
anymore. assumePrimary is in the db lock so we are safe as long as
we check after we locked above. */
if( (source->state() != MemberState::RS_PRIMARY &&
source->state() != MemberState::RS_SECONDARY) ||
replSetForceInitialSyncFailure ) {
int f = replSetForceInitialSyncFailure;
if( f > 0 ) {
replSetForceInitialSyncFailure = f-1;
log() << "replSet test code invoked, replSetForceInitialSyncFailure" << rsLog;
throw DBException("forced error",0);
}
log() << "replSet we are now primary" << rsLog;
throw DBException("primary changed",0);
}
if( ts >= applyGTE ) {
// optimes before we started copying need not be applied.
syncApply(o);
}
_logOpObjRS(o); /* with repl sets we write the ops to our oplog too */
}
if ( ++n % 1000 == 0 ) {
time_t now = time(0);
if (now - start > 10) {
// simple progress metering
log() << "replSet initialSyncOplogApplication applied " << n << " operations, synced to "
<< ts.toStringPretty() << rsLog;
start = now;
}
}
getDur().commitIfNeeded();
}
catch (DBException& e) {
// skip duplicate key exceptions
if( e.getCode() == 11000 || e.getCode() == 11001 ) {
continue;
}
// handle cursor not found (just requery)
if( e.getCode() == 13127 ) {
r.resetCursor();
r.queryGTE(rsoplog, ts);
if( r.haveCursor() ) {
continue;
}
}
// TODO: handle server restart
if( ts <= minValid ) {
// didn't make it far enough
log() << "replSet initial sync failing, error applying oplog " << e.toString() << rsLog;
return false;
}
// otherwise, whatever
break;
}
}
return true;
}