C++ OplogReader::connectToSyncSource方法代码示例

void BackgroundSync::_produce(OperationContext* txn, executor::TaskExecutor* taskExecutor) {
    // this oplog reader does not do a handshake because we don't want the server it's syncing
    // from to track how far it has synced
    {
        stdx::unique_lock<stdx::mutex> lock(_mutex);
        if (_lastOpTimeFetched.isNull()) {
            // then we're initial syncing and we're still waiting for this to be set
            lock.unlock();
            sleepsecs(1);
            // if there is no one to sync from
            return;
        }

        if (_replCoord->isWaitingForApplierToDrain() || _replCoord->getMemberState().primary() ||
            inShutdownStrict()) {
            return;
        }
    }

    while (MONGO_FAIL_POINT(rsBgSyncProduce)) {
        sleepmillis(0);
    }


    // find a target to sync from the last optime fetched
    OpTime lastOpTimeFetched;
    {
        stdx::unique_lock<stdx::mutex> lock(_mutex);
        lastOpTimeFetched = _lastOpTimeFetched;
        _syncSourceHost = HostAndPort();
    }
    OplogReader syncSourceReader;
    syncSourceReader.connectToSyncSource(txn, lastOpTimeFetched, _replCoord);

    // no server found
    if (syncSourceReader.getHost().empty()) {
        sleepsecs(1);
        // if there is no one to sync from
        return;
    }

    long long lastHashFetched;
    {
        stdx::lock_guard<stdx::mutex> lock(_mutex);
        if (_pause) {
            return;
        }
        lastOpTimeFetched = _lastOpTimeFetched;
        lastHashFetched = _lastFetchedHash;
        _syncSourceHost = syncSourceReader.getHost();
        _replCoord->signalUpstreamUpdater();
    }

    const Milliseconds oplogSocketTimeout(OplogReader::kSocketTimeout);

    // Prefer host in oplog reader to _syncSourceHost because _syncSourceHost may be cleared
    // if sync source feedback fails.
    const HostAndPort source = syncSourceReader.getHost();
    syncSourceReader.resetConnection();
    // no more references to oplog reader from here on.

    // If this status is not OK after the fetcher returns from wait(),
    // proceed to execute rollback
    Status remoteOplogStartStatus = Status::OK();

    auto fetcherCallback = stdx::bind(&BackgroundSync::_fetcherCallback,
                                      this,
                                      stdx::placeholders::_1,
                                      stdx::placeholders::_3,
                                      stdx::cref(source),
                                      lastOpTimeFetched,
                                      lastHashFetched,
                                      &remoteOplogStartStatus);

    auto cmdObj = BSON("find" << nsToCollectionSubstring(rsOplogName) << "filter"
                              << BSON("ts" << BSON("$gte" << lastOpTimeFetched.getTimestamp()))
                              << "tailable" << true << "oplogReplay" << true << "awaitData" << true
                              << "maxTimeMS" << int(fetcherMaxTimeMS.count()));
    Fetcher fetcher(taskExecutor,
                    source,
                    nsToDatabase(rsOplogName),
                    cmdObj,
                    fetcherCallback,
                    rpc::makeEmptyMetadata());
    auto scheduleStatus = fetcher.schedule();
    if (!scheduleStatus.isOK()) {
        warning() << "unable to schedule fetcher to read remote oplog on " << source << ": "
                  << scheduleStatus;
        return;
    }
    fetcher.wait();

    // If the background sync is paused after the fetcher is started, we need to
    // re-evaluate our sync source and oplog common point.
    if (isPaused()) {
        return;
    }

    // Execute rollback if necessary.
    // Rollback is a synchronous operation that uses the task executor and may not be
//.........这里部分代码省略.........

void BackgroundSync::_produce(OperationContext* txn) {
    // this oplog reader does not do a handshake because we don't want the server it's syncing
    // from to track how far it has synced
    {
        stdx::unique_lock<stdx::mutex> lock(_mutex);
        if (_lastOpTimeFetched.isNull()) {
            // then we're initial syncing and we're still waiting for this to be set
            lock.unlock();
            sleepsecs(1);
            // if there is no one to sync from
            return;
        }

        if (_replCoord->isWaitingForApplierToDrain() || _replCoord->getMemberState().primary() ||
            inShutdownStrict()) {
            return;
        }
    }

    while (MONGO_FAIL_POINT(rsBgSyncProduce)) {
        sleepmillis(0);
    }


    // find a target to sync from the last optime fetched
    OpTime lastOpTimeFetched;
    {
        stdx::unique_lock<stdx::mutex> lock(_mutex);
        lastOpTimeFetched = _lastOpTimeFetched;
        _syncSourceHost = HostAndPort();
    }
    OplogReader syncSourceReader;
    syncSourceReader.connectToSyncSource(txn, lastOpTimeFetched, _replCoord);

    // no server found
    if (syncSourceReader.getHost().empty()) {
        sleepsecs(1);
        // if there is no one to sync from
        return;
    }

    long long lastHashFetched;
    {
        stdx::lock_guard<stdx::mutex> lock(_mutex);
        if (_pause) {
            return;
        }
        lastOpTimeFetched = _lastOpTimeFetched;
        lastHashFetched = _lastFetchedHash;
        _syncSourceHost = syncSourceReader.getHost();
        _replCoord->signalUpstreamUpdater();
    }

    const Milliseconds oplogSocketTimeout(OplogReader::kSocketTimeout);

    const auto isV1ElectionProtocol = _replCoord->isV1ElectionProtocol();
    // Under protocol version 1, make the awaitData timeout (maxTimeMS) dependent on the election
    // timeout. This enables the sync source to communicate liveness of the primary to secondaries.
    // Under protocol version 0, use a default timeout of 2 seconds for awaitData.
    const Milliseconds fetcherMaxTimeMS(
        isV1ElectionProtocol ? _replCoord->getConfig().getElectionTimeoutPeriod() / 2 : Seconds(2));

    // Prefer host in oplog reader to _syncSourceHost because _syncSourceHost may be cleared
    // if sync source feedback fails.
    const HostAndPort source = syncSourceReader.getHost();
    syncSourceReader.resetConnection();
    // no more references to oplog reader from here on.

    Status fetcherReturnStatus = Status::OK();
    auto fetcherCallback = stdx::bind(&BackgroundSync::_fetcherCallback,
                                      this,
                                      stdx::placeholders::_1,
                                      stdx::placeholders::_3,
                                      stdx::cref(source),
                                      lastOpTimeFetched,
                                      lastHashFetched,
                                      fetcherMaxTimeMS,
                                      &fetcherReturnStatus);


    BSONObjBuilder cmdBob;
    cmdBob.append("find", nsToCollectionSubstring(rsOplogName));
    cmdBob.append("filter", BSON("ts" << BSON("$gte" << lastOpTimeFetched.getTimestamp())));
    cmdBob.append("tailable", true);
    cmdBob.append("oplogReplay", true);
    cmdBob.append("awaitData", true);
    cmdBob.append("maxTimeMS", durationCount<Milliseconds>(fetcherMaxTimeMS));

    BSONObjBuilder metadataBob;
    if (isV1ElectionProtocol) {
        cmdBob.append("term", _replCoord->getTerm());
        metadataBob.append(rpc::kReplSetMetadataFieldName, 1);
    }

    auto dbName = nsToDatabase(rsOplogName);
    auto cmdObj = cmdBob.obj();
    auto metadataObj = metadataBob.obj();
    Fetcher fetcher(&_threadPoolTaskExecutor,
                    source,
                    dbName,
//.........这里部分代码省略.........