C++ MovieData::dump方法代码示例

void FCEUI_MakeBackupMovie(bool dispMessage)
{
	//This function generates backup movie files
	string currentFn;					//Current movie fillename
	string backupFn;					//Target backup filename
	string tempFn;						//temp used in back filename creation
	stringstream stream;
	int x;								//Temp variable for string manip
	bool exist = false;					//Used to test if filename exists
	bool overflow = false;				//Used for special situation when backup numbering exceeds limit

	currentFn = curMovieFilename;		//Get current moviefilename
	backupFn = curMovieFilename;		//Make backup filename the same as current moviefilename
	x = backupFn.find_last_of(".");		 //Find file extension
	backupFn = backupFn.substr(0,x);	//Remove extension
	tempFn = backupFn;					//Store the filename at this point
	for (unsigned int backNum=0;backNum<999;backNum++) //999 = arbituary limit to backup files
	{
		stream.str("");					 //Clear stream
		if (backNum > 99)
			stream << "-" << backNum;	 //assign backNum to stream
		 else if (backNum <= 99 && backNum >= 10)
			stream << "-0" << backNum;      //Make it 010, etc if two digits
		else
			stream << "-00" << backNum;	 //Make it 001, etc if single digit
		backupFn.append(stream.str());	 //add number to bak filename
		backupFn.append(".bak");		 //add extension

		exist = CheckFileExists(backupFn.c_str());	//Check if file exists
		
		if (!exist) 
			break;						//Yeah yeah, I should use a do loop or something
		else
		{
			backupFn = tempFn;			//Before we loop again, reset the filename
			
			if (backNum == 999)			//If 999 exists, we have overflowed, let's handle that
			{
				backupFn.append("-001.bak"); //We are going to simply overwrite 001.bak
				overflow = true;		//Flag that we have exceeded limit
				break;					//Just in case
			}
		}
	}

	MovieData md = currMovieData;								//Get current movie data
	EMUFILE* outf = new EMUFILE_FILE(backupFn.c_str(),"wb"); //FCEUD_UTF8_fstream(backupFn, "wb");	//open/create file
	md.dump(outf,false);										//dump movie data
	delete outf;												//clean up, delete file object
	
	//TODO, decide if fstream successfully opened the file and print error message if it doesn't

	if (dispMessage)	//If we should inform the user 
	{
//		if (overflow)
//			FCEUI_DispMessage("Backup overflow, overwriting %s",backupFn.c_str()); //Inform user of overflow
//		else
//			FCEUI_DispMessage("%s created",backupFn.c_str()); //Inform user of backup filename
	}
}

void FCEUI_CreateMovieFile(std::string fn)
{
	MovieData md = currMovieData;							//Get current movie data
	EMUFILE* outf = FCEUD_UTF8_fstream(fn, "wb");		//open/create file
	md.dump(outf,false);									//dump movie data
	delete outf;											//clean up, delete file object
}

int FCEUMOV_WriteState(EMUFILE* os)
{
	//we are supposed to dump the movie data into the savestate
	if(movieMode == MOVIEMODE_RECORD || movieMode == MOVIEMODE_PLAY || movieMode == MOVIEMODE_FINISHED)
		return currMovieData.dump(os, true);
	else return 0;
}

static int FCEUMOV_WriteState(std::ostream* os)
{
	//we are supposed to dump the movie data into the savestate
	if(movieMode == MOVIEMODE_RECORD || movieMode == MOVIEMODE_PLAY)
		return currMovieData.dump(os, true);
	else return 0;
}

//begin recording a new movie
//TODO - BUG - the record-from-another-savestate doesnt work.
static void FCEUI_SaveMovie(const char *fname, std::wstring author)
{
	//if(!FCEU_IsValidUI(FCEUI_RECORDMOVIE))
	//	return;

	assert(fname);

	FCEUI_StopMovie();

	openRecordingMovie(fname);

	currFrameCounter = 0;
	//LagCounterReset();

	currMovieData = MovieData();
	currMovieData.guid.newGuid();

	if(author != L"") currMovieData.comments.push_back(L"author " + author);
	//currMovieData.romChecksum = GameInfo->MD5;
	//currMovieData.romFilename = FileBase;

	//todo ?
	//poweron(true);
	//else
	//	MovieData::dumpSavestateTo(&currMovieData.savestate,Z_BEST_COMPRESSION);

	//we are going to go ahead and dump the header. from now on we will only be appending frames
	currMovieData.dump(osRecordingMovie, false);

	movieMode = MOVIEMODE_RECORD;
	movie_readonly = false;
	currRerecordCount = 0;
	
	//FCEU_DispMessage("Movie recording started.");
}

void mov_savestate(std::ostream *os)//std::ostream* os
{
	if(movieMode == MOVIEMODE_RECORD || movieMode == MOVIEMODE_PLAY)
	{
		write32lemov(kMOVI,os);
		currMovieData.dump(os, true);
	}
	else
	{
		write32lemov(kNOMO,os);
	}
}

void mov_savestate(EMUFILE* fp)
{
	//we are supposed to dump the movie data into the savestate
	//if(movieMode == MOVIEMODE_RECORD || movieMode == MOVIEMODE_PLAY)
	//	return currMovieData.dump(os, true);
	//else return 0;
	if(movieMode != MOVIEMODE_INACTIVE)
	{
		write32le(kMOVI,fp);
		currMovieData.dump(fp, true);
	}
	else
	{
		write32le(kNOMO,fp);
	}
}

//begin recording a new movie
//TODO - BUG - the record-from-another-savestate doesnt work.
 void SaveMovie(const char *fname, std::string author, int controllers)
{
	assert(fname);

	StopMovie();

	openRecordingMovie(fname);

	currFrameCounter = 0;
	//LagCounterReset();

	currMovieData = MovieData();
//	currMovieData.guid.newGuid();

	if(author != "") currMovieData.comments.push_back("author " + author);
	//currMovieData.romChecksum = GameInfo->MD5;
//	currMovieData.romFilename = cdip->gamename;//GetRomName();
	
//	extern bool _HACK_DONT_STOPMOVIE;
//	_HACK_DONT_STOPMOVIE = true;
	pcejin.lagFrameCounter = 0;
	pcejin.isLagFrame = false;
	PCE_Power();
//	_HACK_DONT_STOPMOVIE = false;
	currMovieData.ports = controllers;

	//todo ?
	//poweron(true);
	//else
	//	MovieData::dumpSavestateTo(&currMovieData.savestate,Z_BEST_COMPRESSION);

	//we are going to go ahead and dump the header. from now on we will only be appending frames
	currMovieData.dump(osRecordingMovie, false);

	movieMode = MOVIEMODE_RECORD;
	movie_readonly = false;
	currRerecordCount = 0;
	ClearPCESRAM();
	LagFrameCounter=0;

	DisplayMessage("Movie recording started.");
}

//begin recording a new movie
//TODO - BUG - the record-from-another-savestate doesnt work.
void FCEUI_SaveMovie(const char *fname, EMOVIE_FLAG flags, std::wstring author)
{
	if(!FCEU_IsValidUI(FCEUI_RECORDMOVIE))
		return;

	assert(fname);

	FCEUI_StopMovie();

	openRecordingMovie(fname);

	currFrameCounter = 0;
	LagCounterReset();
	FCEUMOV_CreateCleanMovie();
#ifndef _GLIBCXX_USE_WCHAR_T
	if(author != "") currMovieData.comments.push_back("author " + author);
#else
	if(author != L"") currMovieData.comments.push_back(L"author " + author);
#endif

	if(flags & MOVIE_FLAG_FROM_POWERON)
	{
		movieFromPoweron = true;
		poweron(true);
	}
	else
	{
		movieFromPoweron = false;
		MovieData::dumpSavestateTo(&currMovieData.savestate,Z_BEST_COMPRESSION);
	}

	FCEUMOV_ClearCommands();

	//we are going to go ahead and dump the header. from now on we will only be appending frames
	currMovieData.dump(osRecordingMovie, false);

	movieMode = MOVIEMODE_RECORD;
	movie_readonly = false;

	FCEU_DispMessage("Movie recording started.",0);
}

//.........这里部分代码省略.........

	Post-movie savestate event

    * Whan a savestate is loaded and is determined that the savestate-movie length is less than the savestate framecount then it is a post-movie savestate. These occur when a savestate was made during Movie Finished mode. 
	* If read+write, the entire savestate movie will be loaded and replace current movie.
    * If read-only, the savestate movie will be discarded
    * Mode will be switched to Move Finished
    * Savestate will be loaded
    * Current framecount changes to savestate framecount
    * User will have control of input as if Movie inactive mode 
	*/


	if(movieMode != MOVIEMODE_INACTIVE)
	{
		//handle moviefile mismatch
		if(tempMovieData.guid != currMovieData.guid)
		{
			//mbg 8/18/08 - this code  can be used to turn the error message into an OK/CANCEL
			#if defined(WIN32) && !defined(WXPORT)
				std::string msg = "There is a mismatch between savestate's movie and current movie.\ncurrent: " + currMovieData.guid.toString() + "\nsavestate: " + tempMovieData.guid.toString() + "\n\nThis means that you have loaded a savestate belonging to a different movie than the one you are playing now.\n\nContinue loading this savestate anyway?";
				int result = MessageBox(MainWindow->getHWnd(),msg.c_str(),"Error loading savestate",MB_OKCANCEL);
				if(result == IDCANCEL)
					return false;
			#else
				FCEU_PrintError("Mismatch between savestate's movie and current movie.\ncurrent: %s\nsavestate: %s\n",currMovieData.guid.toString().c_str(),tempMovieData.guid.toString().c_str());
				return false;
			#endif
		}

		closeRecordingMovie();

		if(!movie_readonly)
		{
			currMovieData = tempMovieData;
			currMovieData.rerecordCount = currRerecordCount;
		}

		if(currFrameCounter > (int)currMovieData.records.size())
		{
			// if the frame counter is longer than our current movie,
			// switch to "finished" mode.
			// this is a mode that behaves like "inactive"
			// except it permits switching to play/record by loading an earlier savestate.
			// (and we continue to store the finished movie in savestates made while finished)
			osd->setLineColor(255,0,0); // let's make the text red too to hopefully catch the user's attention a bit.
			FinishPlayback();
			osd->setLineColor(255,255,255);

			//FCEU_PrintError("Savestate is from a frame (%d) after the final frame in the movie (%d). This is not permitted.", currFrameCounter, currMovieData.records.size()-1);
			//return false;
		}
		else if(movie_readonly)
		{
			//-------------------------------------------------------------
			//this code would reload the movie from disk. allegedly it is helpful to hexers, but
			//it is way too slow with dsm format. so it is only here as a reminder, and in case someone
			//wants to play with it
			//-------------------------------------------------------------
			//{
			//	fstream fs (curMovieFilename);
			//	if(!LoadFM2(tempMovieData, &fs, INT_MAX, false))
			//	{
			//		FCEU_PrintError("Failed to reload DSM after loading savestate");
			//	}
			//	fs.close();
			//	currMovieData = tempMovieData;
			//}
			//-------------------------------------------------------------

			movieMode = MOVIEMODE_PLAY;
		}
		else
		{
		//	#ifdef _S9XLUA_H
		//	if(!FCEU_LuaRerecordCountSkip())
				currRerecordCount++;
		//	#endif
			
			currMovieData.rerecordCount = currRerecordCount;
			currMovieData.truncateAt(currFrameCounter);

			openRecordingMovie(curMovieFilename);
			if(!osRecordingMovie)
			{
			   osd->setLineColor(255, 0, 0);
			   osd->addLine("Can't save movie file!");
			}

			//printf("DUMPING MOVIE: %d FRAMES\n",currMovieData.records.size());
			currMovieData.dump(osRecordingMovie, false);
			movieMode = MOVIEMODE_RECORD;
		}
	}
	
	load_successful = true;
	freshMovie = false;

	return true;
}

//begin recording a new movie
//TODO - BUG - the record-from-another-savestate doesnt work.
void FCEUI_SaveMovie(const char *fname, std::wstring author, int flag, std::string sramfname, const DateTime &rtcstart)
{
	//if(!FCEU_IsValidUI(FCEUI_RECORDMOVIE))
	//	return;

	assert(fname);

	FCEUI_StopMovie();

	openRecordingMovie(fname);

	currFrameCounter = 0;
	//LagCounterReset();

	currMovieData = MovieData();
	currMovieData.guid.newGuid();

	if(author != L"") currMovieData.comments.push_back(L"author " + author);
	currMovieData.romChecksum = gameInfo.crc;
	currMovieData.romSerial = gameInfo.ROMserial;
	currMovieData.romFilename = path.GetRomName();
	currMovieData.rtcStart = rtcstart;

	// reset firmware (some games can write to it)
	if (CommonSettings.UseExtFirmware == false)
	{
		NDS_CreateDummyFirmware(&CommonSettings.InternalFirmConf);
	}

	NDS_Reset();

	//todo ?
	//poweron(true);
	//else
	//	MovieData::dumpSavestateTo(&currMovieData.savestate,Z_BEST_COMPRESSION);

	if(flag == 1)
		EMUFILE::readAllBytes(&currMovieData.sram, sramfname);

	//we are going to go ahead and dump the header. from now on we will only be appending frames
	currMovieData.dump(osRecordingMovie, false);

	currFrameCounter=0;
	lagframecounter=0;
	LagFrameFlag=0;
	lastLag=0;
	TotalLagFrames=0;

	movieMode = MOVIEMODE_RECORD;
	movie_readonly = false;
	currRerecordCount = 0;
	MMU_new.backupDevice.movie_mode();

	if(currMovieData.sram.size() != 0)
	{
		bool success = MovieData::loadSramFrom(&currMovieData.sram);
		if(!success) return;
	}

	driver->USR_InfoMessage("Movie recording started.");
}

//.........这里部分代码省略.........
						FCEUI_StopMovie();
					}

					return false;
				}
			#else
				if (!backupSavestates) //If backups are disabled we can just resume normally since we can't restore so stop movie and inform user
				{
					FCEU_PrintError("Mismatch between savestate's movie and current movie.\ncurrent: %s\nsavestate: %s\nUnable to restore backup, movie playback stopped.\n",currMovieData.guid.toString().c_str(),tempMovieData.guid.toString().c_str());
					FCEUI_StopMovie();
				}
				else
				FCEU_PrintError("Mismatch between savestate's movie and current movie.\ncurrent: %s\nsavestate: %s\n",currMovieData.guid.toString().c_str(),tempMovieData.guid.toString().c_str());

				return false;
			#endif
		}

		closeRecordingMovie();

		if (movie_readonly)
		{
			// currFrameCounter at this point represents the savestate framecount
			int frame_of_mismatch = CheckTimelines(tempMovieData, currMovieData);
			if (frame_of_mismatch >= 0)
			{
				// Wrong timeline, do apprioriate logic here
				if (!backupSavestates)	//If backups are disabled we can just resume normally since we can't restore so stop movie and inform user
				{
					FCEU_PrintError("Error: Savestate not in the same timeline as movie!\nFrame %d branches from current timeline\nUnable to restore backup, movie playback stopped.", frame_of_mismatch);
					FCEUI_StopMovie();
				} else
					FCEU_PrintError("Error: Savestate not in the same timeline as movie!\nFrame %d branches from current timeline", frame_of_mismatch);
				return false;
			} else if (movieMode == MOVIEMODE_FINISHED
				&& currFrameCounter > (int)currMovieData.records.size()
				&& currMovieData.records.size() == tempMovieData.records.size())
			{
				// special case (in MOVIEMODE_FINISHED mode)
				// allow loading post-movie savestates that were made after finishing current movie

			} else if (currFrameCounter > (int)currMovieData.records.size())
			{
				// this is future event state, don't allow it
				//TODO: turn frame counter to red to get attention
				if (!backupSavestates)	//If backups are disabled we can just resume normally since we can't restore so stop movie and inform user
				{
					FCEU_PrintError("Error: Savestate is from a frame (%d) after the final frame in the movie (%d). This is not permitted.\nUnable to restore backup, movie playback stopped.", currFrameCounter, currMovieData.records.size()-1);
					FCEUI_StopMovie();
				} else
					FCEU_PrintError("Savestate is from a frame (%d) after the final frame in the movie (%d). This is not permitted.", currFrameCounter, currMovieData.records.size()-1);
				return false;
			} else if (currFrameCounter > (int)tempMovieData.records.size())
			{
				// this is post-movie savestate, don't allow it
				//TODO: turn frame counter to red to get attention
				if (!backupSavestates)	//If backups are disabled we can just resume normally since we can't restore so stop movie and inform user
				{
					FCEU_PrintError("Error: Savestate is from a frame (%d) after the final frame in the savestated movie (%d). This is not permitted.\nUnable to restore backup, movie playback stopped.", currFrameCounter, tempMovieData.records.size()-1);
					FCEUI_StopMovie();
				} else
					FCEU_PrintError("Savestate is from a frame (%d) after the final frame in the savestated movie (%d). This is not permitted.", currFrameCounter, tempMovieData.records.size()-1);
				return false;
			} else
			{
				// Finally, this is a savestate file for this movie
				movieMode = MOVIEMODE_PLAY;
			}
		} else
		{
			//Read+Write mode
			if (currFrameCounter > (int)tempMovieData.records.size())
			{
				//This is a post movie savestate, handle it differently
				//Replace movie contents but then switch to movie finished mode
				currMovieData = tempMovieData;
				openRecordingMovie(curMovieFilename);
				currMovieData.dump(osRecordingMovie, false/*currMovieData.binaryFlag*/);
				FinishPlayback();
			} else
			{
				//truncate before we copy, just to save some time, unless the user selects a full copy option
				if (!fullSaveStateLoads)
					//we can only assume this here since we have checked that the frame counter is not greater than the movie data
					tempMovieData.truncateAt(currFrameCounter);
				
				currMovieData = tempMovieData;
				FCEUMOV_IncrementRerecordCount();
				openRecordingMovie(curMovieFilename);
				currMovieData.dump(osRecordingMovie, false/*currMovieData.binaryFlag*/);
				movieMode = MOVIEMODE_RECORD;

			}
		}
	}

	load_successful = true;

	return true;
}

//.........这里部分代码省略.........

	Playback, Recording + Read+write

    * Check that GUID of movie and savestate-movie must match or else error
          o on error: a message informing that the savestate doesn't belong to this movie. This is a GUID mismatch error. Give user a choice to load it anyway.
                + failstate: if use declines, loadstate attempt canceled, movie can resume as if not attempted (stop movie if resume fails)canceled, movie can resume if backup savestates enabled else stopmovie
    * Check that savestate framcount <= savestate movie length. If not this is a post-movie savestate
          o on post-movie: See post-movie event section. 
    * savestate passed all error checks and will now be loaded in its entirety and replace movie (note: there will be no truncation yet)
    * current framecount will be set to savestate framecount
    * on the next frame of input, movie will be truncated to framecount
          o (note: savestate-movie can be a future event of the movie timeline, or a completely new timeline and it is still allowed) 
    * Rerecord count of movie will be incremented
    * Movie is now in record mode 

	Post-movie savestate event

    * Whan a savestate is loaded and is determined that the savestate-movie length is less than the savestate framecount then it is a post-movie savestate. These occur when a savestate was made during Movie Finished mode. 
	* If read+write, the entire savestate movie will be loaded and replace current movie.
    * If read-only, the savestate movie will be discarded
    * Mode will be switched to Move Finished
    * Savestate will be loaded
    * Current framecount changes to savestate framecount
    * User will have control of input as if Movie inactive mode 
	*/


	if(movieMode == MOVIEMODE_PLAY || movieMode == MOVIEMODE_RECORD)
	{
		//handle moviefile mismatch
/*		if(tempMovieData.guid != currMovieData.guid)
		{
			//mbg 8/18/08 - this code  can be used to turn the error message into an OK/CANCEL
			#ifdef WIN32
				//std::string msg = "There is a mismatch between savestate's movie and current movie.\ncurrent: " + currMovieData.guid.toString() + "\nsavestate: " + tempMovieData.guid.toString() + "\n\nThis means that you have loaded a savestate belonging to a different movie than the one you are playing now.\n\nContinue loading this savestate anyway?";
				//extern HWND pwindow;
				//int result = MessageBox(pwindow,msg.c_str(),"Error loading savestate",MB_OKCANCEL);
				//if(result == IDCANCEL)
				//	return false;
			#else
				DisplayMessage("Mismatch between savestate's movie and current movie.\ncurrent: %s\nsavestate: %s\n",currMovieData.guid.toString().c_str(),tempMovieData.guid.toString().c_str());
				return false;
			#endif
		}*/

		closeRecordingMovie();

		if(movie_readonly)
		{
			//-------------------------------------------------------------
			//this code would reload the movie from disk. allegedly it is helpful to hexers, but
			//it is way too slow with dsm format. so it is only here as a reminder, and in case someone
			//wants to play with it
			//-------------------------------------------------------------
			//{
			//	fstream fs (curMovieFilename);
			//	if(!LoadMC2(tempMovieData, &fs, INT_MAX, false))
			//	{
			//		MDFN_PrintError("Failed to reload DSM after loading savestate");
			//	}
			//	fs.close();
			//	currMovieData = tempMovieData;
			//}
			//-------------------------------------------------------------

			//if the frame counter is longer than our current movie, then error
			if(currFrameCounter > (int)currMovieData.records.size())
			{
				MDFN_PrintError("Savestate is from a frame (%d) after the final frame in the movie (%d). This is not permitted.", currFrameCounter, currMovieData.records.size()-1);
				return false;
			}

			movieMode = MOVIEMODE_PLAY;
		}
		else
		{
			//truncate before we copy, just to save some time
			tempMovieData.truncateAt(currFrameCounter);
			currMovieData = tempMovieData;

			currRerecordCount++;
			
			currMovieData.rerecordCount = currRerecordCount;

			openRecordingMovie(curMovieFilename);
			currMovieData.dump(osRecordingMovie, false);
			movieMode = MOVIEMODE_RECORD;
		}
	}
	
	load_successful = true;
	freshMovie = false;

	//// Maximus: Show the last input combination entered from the
	//// movie within the state
	//if(current!=0) // <- mz: only if playing or recording a movie
	//	memcpy(&cur_input_display, joop, 4);

	return true;
}

//.........这里部分代码省略.........
	// set the FAMICOM PAD 2 Mic thing 
	{
	int t;
	g_config->getOption("SDL.Input.FamicomPad2.EnableMic", &t);
		if(t)
			replaceP2StartWithMicrophone = t;
	}

    // update the input devices
	UpdateInput(g_config);

	// check for a .fcm file to convert to .fm2
	g_config->getOption ("SDL.FCMConvert", &s);
	g_config->setOption ("SDL.FCMConvert", "");
	if (!s.empty())
	{
		int okcount = 0;
		std::string infname = s.c_str();
		// produce output filename
		std::string outname;
		size_t dot = infname.find_last_of (".");
		if (dot == std::string::npos)
			outname = infname + ".fm2";
		else
			outname = infname.substr(0,dot) + ".fm2";
	  
		MovieData md;
		EFCM_CONVERTRESULT result = convert_fcm (md, infname);

		if (result == FCM_CONVERTRESULT_SUCCESS) {
			okcount++;
        // *outf = new EMUFILE;
		EMUFILE_FILE* outf = FCEUD_UTF8_fstream (outname, "wb");
		md.dump (outf,false);
		delete outf;
		FCEUD_Message ("Your file has been converted to FM2.\n");
	}
	else {
		FCEUD_Message ("Something went wrong while converting your file...\n");
	}
	  
	DriverKill();
	  SDL_Quit();
	  return 0;
	}

	// If x/y res set to 0, store current display res in SDL.LastX/YRes
	int yres, xres;
	g_config->getOption("SDL.XResolution", &xres);
	g_config->getOption("SDL.YResolution", &yres);
#if SDL_VERSION_ATLEAST(2, 0, 0)
	// TODO _ SDL 2.0
#else
	const SDL_VideoInfo* vid_info = SDL_GetVideoInfo();
	if(xres == 0) 
    {
        if(vid_info != NULL)
        {
			g_config->setOption("SDL.LastXRes", vid_info->current_w);
        }
        else
        {
			g_config->setOption("SDL.LastXRes", 512);
        }
    }
	else

static bool FCEUMOV_ReadState(std::istream* is, uint32 size)
{
	load_successful = false;

	//a little rule: cant load states in read+write mode with a movie from an archive.
	//so we are going to switch it to readonly mode in that case
	if(!movie_readonly 
		//*&& FCEU_isFileInArchive(curMovieFilename)*/
		) {
		FCEU_PrintError("Cannot loadstate in Read+Write with movie from archive. Movie is now Read-Only.");
		movie_readonly = true;
	}

	MovieData tempMovieData = MovieData();
	std::ios::pos_type curr = is->tellg();
	if(!LoadFM2(tempMovieData, is, size, false)) {
		
		/*is->seekg((uint32)curr+size);
		extern bool FCEU_state_loading_old_format;
		if(FCEU_state_loading_old_format) {
			if(movieMode == MOVIEMODE_PLAY || movieMode == MOVIEMODE_RECORD) {
				FCEUI_StopMovie();			
				FCEU_PrintError("You have tried to use an old savestate while playing a movie. This is unsupported (since the old savestate has old-format movie data in it which can't be converted on the fly)");
			}
		}*/
		return false;
	}

	//complex TAS logic for when a savestate is loaded:
	//----------------
	//if we are playing or recording and toggled read-only:
	//  then, the movie we are playing must match the guid of the one stored in the savestate or else error.
	//  the savestate is assumed to be in the same timeline as the current movie.
	//  if the current movie is not long enough to get to the savestate's frame#, then it is an error. 
	//  the movie contained in the savestate will be discarded.
	//  the emulator will be put into play mode.
	//if we are playing or recording and toggled read+write
	//  then, the movie we are playing must match the guid of the one stored in the savestate or else error.
	//  the movie contained in the savestate will be loaded into memory
	//  the frames in the movie after the savestate frame will be discarded
	//  the in-memory movie will have its rerecord count incremented
	//  the in-memory movie will be dumped to disk as fcm.
	//  the emulator will be put into record mode.
	//if we are doing neither:
	//  then, we must discard this movie and just load the savestate


	if(movieMode == MOVIEMODE_PLAY || movieMode == MOVIEMODE_RECORD)
	{
		//handle moviefile mismatch
		if(tempMovieData.guid != currMovieData.guid)
		{
			//mbg 8/18/08 - this code  can be used to turn the error message into an OK/CANCEL
			#ifdef WIN32
				//std::string msg = "There is a mismatch between savestate's movie and current movie.\ncurrent: " + currMovieData.guid.toString() + "\nsavestate: " + tempMovieData.guid.toString() + "\n\nThis means that you have loaded a savestate belonging to a different movie than the one you are playing now.\n\nContinue loading this savestate anyway?";
				//extern HWND pwindow;
				//int result = MessageBox(pwindow,msg.c_str(),"Error loading savestate",MB_OKCANCEL);
				//if(result == IDCANCEL)
				//	return false;
			#else
				FCEU_PrintError("Mismatch between savestate's movie and current movie.\ncurrent: %s\nsavestate: %s\n",currMovieData.guid.toString().c_str(),tempMovieData.guid.toString().c_str());
				return false;
			#endif
		}

		closeRecordingMovie();

		if(movie_readonly)
		{
			//if the frame counter is longer than our current movie, then error
			if(currFrameCounter > (int)currMovieData.records.size())
			{
				FCEU_PrintError("Savestate is from a frame (%d) after the final frame in the movie (%d). This is not permitted.", currFrameCounter, currMovieData.records.size()-1);
				return false;
			}
			movieMode = MOVIEMODE_PLAY;
		}
		else
		{
			//truncate before we copy, just to save some time
			tempMovieData.truncateAt(currFrameCounter);
			currMovieData = tempMovieData;
			
			#ifdef _S9XLUA_H
			if(!FCEU_LuaRerecordCountSkip())
				currRerecordCount++;
			#endif
			
			currMovieData.rerecordCount = currRerecordCount;

			openRecordingMovie(curMovieFilename);
			currMovieData.dump(osRecordingMovie, false);
			movieMode = MOVIEMODE_RECORD;
		}
	}
	
	load_successful = true;

	//// Maximus: Show the last input combination entered from the
	//// movie within the state
//.........这里部分代码省略.........