当前位置: 首页>>代码示例>>C++>>正文


C++ MoveSpline::FinalDestination方法代码示例

本文整理汇总了C++中MoveSpline::FinalDestination方法的典型用法代码示例。如果您正苦于以下问题:C++ MoveSpline::FinalDestination方法的具体用法?C++ MoveSpline::FinalDestination怎么用?C++ MoveSpline::FinalDestination使用的例子?那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在MoveSpline的用法示例。


在下文中一共展示了MoveSpline::FinalDestination方法的7个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于系统推荐出更棒的C++代码示例。

示例1: WriteCreate

    void PacketBuilder::WriteCreate(const MoveSpline& move_spline, ByteBuffer& data)
    {
        // WriteClientStatus(mov,data);
        // data.append<float>(&mov.m_float_values[SpeedWalk], SpeedMaxCount);
        // if (mov.SplineEnabled())
        {
            MoveSplineFlag splineFlags = move_spline.splineflags;

            data << splineFlags.raw();

            if (splineFlags.final_angle)
            {
                data << move_spline.facing.angle;
            }
            else if (splineFlags.final_target)
            {
                data << move_spline.facing.target;
            }
            else if (splineFlags.final_point)
            {
                data << move_spline.facing.f.x << move_spline.facing.f.y << move_spline.facing.f.z;
            }

            data << move_spline.timePassed();
            data << move_spline.Duration();
            data << move_spline.GetId();

            uint32 nodes = move_spline.getPath().size();
            data << nodes;
            data.append<Vector3>(&move_spline.getPath()[0], nodes);
            data << (move_spline.isCyclic() ? Vector3::zero() : move_spline.FinalDestination());
        }
    }
开发者ID:Adeer,项目名称:OregonCore,代码行数:33,代码来源:packet_builder.cpp

示例2: WriteCreateData

    void PacketBuilder::WriteCreateData(MoveSpline const& moveSpline, ByteBuffer& data)
    {
        if (!moveSpline.Finalized())
        {
            MoveSplineFlag splineFlags = moveSpline.splineflags;

            if ((splineFlags & MoveSplineFlag::Parabolic) && moveSpline.effect_start_time < moveSpline.Duration())
                data << moveSpline.vertical_acceleration;   // added in 3.1

            data << moveSpline.timePassed();

            if (splineFlags.final_angle)
                data << moveSpline.facing.angle;
            else if (splineFlags.final_target)
            {
                ObjectGuid facingGuid = moveSpline.facing.target;
                data.WriteByteSeq(facingGuid[5]);
                data.WriteByteSeq(facingGuid[3]);
                data.WriteByteSeq(facingGuid[7]);
                data.WriteByteSeq(facingGuid[1]);
                data.WriteByteSeq(facingGuid[6]);
                data.WriteByteSeq(facingGuid[4]);
                data.WriteByteSeq(facingGuid[2]);
                data.WriteByteSeq(facingGuid[0]);
            }

            uint32 nodes = moveSpline.getPath().size();
            for (uint32 i = 0; i < nodes; ++i)
            {
                data << float(moveSpline.getPath()[i].z);
                data << float(moveSpline.getPath()[i].x);
                data << float(moveSpline.getPath()[i].y);
            }

            if (splineFlags.final_point)
                data << moveSpline.facing.f.x << moveSpline.facing.f.z << moveSpline.facing.f.y;

            data << float(1.f);                             // splineInfo.duration_mod_next; added in 3.1
            data << moveSpline.Duration();
            if (splineFlags & (MoveSplineFlag::Parabolic | MoveSplineFlag::Animation))
                data << moveSpline.effect_start_time;       // added in 3.1

            data << float(1.f);                             // splineInfo.duration_mod; added in 3.1
        }

        if (!moveSpline.isCyclic())
        {
            Vector3 dest = moveSpline.FinalDestination();
            data << float(dest.z);
            data << float(dest.x);
            data << float(dest.y);
        }
        else
            data << Vector3::zero();

        data << moveSpline.GetId();
    }
开发者ID:AwkwardDev,项目名称:WoWSource434,代码行数:57,代码来源:MovementPacketBuilder.cpp

示例3: WriteData

    void PacketBuilder::WriteData(const MoveSpline& move_spline, ByteBuffer& data)
    {
        MoveSplineFlag splineFlags = move_spline.splineflags;
        uint32 nodes = move_spline.getPath().size();

        data << move_spline.timePassed();

        if (splineFlags.orientationFixed)
            data << move_spline.facing.angle;

        if (splineFlags.final_target)
        {
            uint64 Guid = move_spline.facing.target;

            uint8 guidBytes[] = { 5, 3, 7, 1, 6, 4, 2, 0 };
            data.WriteGuidBytes(Guid, guidBytes, 8, 0);
        }

        for (uint32 i = 0; i < nodes; i++)
        {
            data << move_spline.getPath()[0].z;
            data << move_spline.getPath()[0].x;
            data << move_spline.getPath()[0].y;
        }

        if(splineFlags.flying)
            data << move_spline.facing.f.x << move_spline.facing.f.z << move_spline.facing.f.y;

        data << float(1.f);
        data << uint32(0);

        data << move_spline.effect_start_time;

        data << float(1.f);

        data << move_spline.FinalDestination().z;
        data << move_spline.FinalDestination().x;
        data << move_spline.FinalDestination().y;
        data << move_spline.GetId();
    }
开发者ID:Dekadencee,项目名称:StrawberryCore,代码行数:40,代码来源:packet_builder.cpp

示例4: WriteCreateBytes

    void PacketBuilder::WriteCreateBytes(const MoveSpline& move_spline, ByteBuffer& data)
    {
        if (!move_spline.Finalized())
        {
            MoveSplineFlag splineFlags = move_spline.splineflags;
            uint32 nodes = move_spline.getPath().size();
            bool hasSplineStartTime = move_spline.splineflags & (MoveSplineFlag::Trajectory | MoveSplineFlag::Animation);
            bool hasSplineVerticalAcceleration = (move_spline.splineflags & MoveSplineFlag::Trajectory) && move_spline.effect_start_time < move_spline.Duration();

            if (hasSplineVerticalAcceleration)
                data << float(move_spline.vertical_acceleration);   // added in 3.1

            data << int32(move_spline.timePassed());

            if (move_spline.splineflags & MoveSplineFlag::Final_Angle)
                data << float(NormalizeOrientation(move_spline.facing.angle));
            else if (move_spline.splineflags & MoveSplineFlag::Final_Target)
                 data.WriteGuidBytes<5, 3, 7, 1, 6, 4, 2, 0>(ObjectGuid(move_spline.facing.target));

            for (uint32 i = 0; i < nodes; ++i)
            {
                data << float(move_spline.getPath()[i].z);
                data << float(move_spline.getPath()[i].x);
                data << float(move_spline.getPath()[i].y);
            }

            if (move_spline.splineflags & MoveSplineFlag::Final_Point)
                data << float(move_spline.facing.f.x) << float(move_spline.facing.f.z) << float(move_spline.facing.f.y);

            data << float(1.f);
            data << int32(move_spline.Duration());
            if (hasSplineStartTime)
                data << int32(move_spline.effect_start_time);   // added in 3.1

            data << float(1.f);
        }

        if (!move_spline.isCyclic())
        {
            Vector3 dest = move_spline.FinalDestination();
            data << float(dest.z);
            data << float(dest.x);
            data << float(dest.y);
        }
        else
            data << Vector3::zero();

        data << uint32(move_spline.GetId());
    }
开发者ID:BooYoods,项目名称:cmangos-wod,代码行数:49,代码来源:packet_builder.cpp

示例5: WriteCreateData

    void PacketBuilder::WriteCreateData(MoveSpline const& moveSpline, ByteBuffer& data)
    {
        if (!moveSpline.Finalized())
        {
            MoveSplineFlag const& splineFlags = moveSpline.splineflags;
            MonsterMoveType type = GetMonsterMoveType(moveSpline);

            data << moveSpline.timePassed();
            data << float(1.f);                             // splineInfo.duration_mod_next; added in 3.1
            data << float(1.f);                             // splineInfo.duration_mod; added in 3.1

            uint32 nodes = moveSpline.getPath().size();
            for (uint32 i = 0; i < nodes; ++i)
            {
                data << float(moveSpline.getPath()[i].x);
                data << float(moveSpline.getPath()[i].z);
                data << float(moveSpline.getPath()[i].y);
            }

            if (splineFlags & (MoveSplineFlag::Parabolic | MoveSplineFlag::Animation))
                data << moveSpline.effect_start_time;       // added in 3.1

            data << uint8(type);

            if (type == MonsterMoveFacingAngle)
                data << float(moveSpline.facing.angle);

            if (type == MonsterMoveFacingPoint)
                data << moveSpline.facing.f.x << moveSpline.facing.f.z << moveSpline.facing.f.y;

            if ((splineFlags & MoveSplineFlag::Parabolic) && moveSpline.effect_start_time < moveSpline.Duration())
                data << float(moveSpline.vertical_acceleration);   // added in 3.1

            //    NYI block here
            data << moveSpline.Duration();

        }

        Vector3 destination = moveSpline.isCyclic() ? Vector3::zero() : moveSpline.FinalDestination();

        data << float(destination.x);
        data << float(destination.z);
        data << moveSpline.GetId();
        data << float(destination.y);

    }
开发者ID:AriDEV,项目名称:SkyFire.548,代码行数:46,代码来源:MovementPacketBuilder.cpp

示例6: WriteMonsterMove

    void PacketBuilder::WriteMonsterMove(const MoveSpline& move_spline, WorldPacket& data, Unit* unit)
    {
        ObjectGuid guid = unit->GetGUID();
        ObjectGuid transport = unit->GetTransGUID();
        uint32 type;

        data << float(0.f); // Most likely transport Y
        data << uint32(getMSTime());
        data << float(0.f); // Most likely transport Z
        data << float(0.f); // Most likely transport X

        if (!move_spline.isCyclic())
        {
            Vector3 dest = move_spline.FinalDestination();
            data << float(dest.x);
            data << float(dest.y);
            data << float(dest.z);
        }
        else
            data << Vector3::zero();
        
        data.WriteBit(guid[3]);
        data.WriteBit(!move_spline.splineflags.raw());
        data.WriteBit(guid[6]);

        data.WriteBit(1);
        data.WriteBit(1);

        switch (move_spline.splineflags & MoveSplineFlag::Mask_Final_Facing)
        {
            case MoveSplineFlag::Final_Target:
                type = 3;
                break;
            case MoveSplineFlag::Final_Angle:
                type = 4;
                break;
            case MoveSplineFlag::Final_Point:
                type = 2;
                break;
            default:
                type = 0;
                break;
        }

        data.WriteBits(type, 3);
        data.WriteBit(1);
        data.WriteBit(guid[2]);
        data.WriteBit(guid[7]);
        data.WriteBit(guid[5]);

        if (type == 3)
        {
            ObjectGuid targetGuid = move_spline.facing.target;
            data.WriteBit(targetGuid[6]);
            data.WriteBit(targetGuid[7]);
            data.WriteBit(targetGuid[0]);
            data.WriteBit(targetGuid[5]);
            data.WriteBit(targetGuid[2]);
            data.WriteBit(targetGuid[3]);
            data.WriteBit(targetGuid[4]);
            data.WriteBit(targetGuid[1]);
        }

        data.WriteBit(1);
        data.WriteBit(guid[4]);
        
        int32 splineWpCount = move_spline.splineflags & MoveSplineFlag::UncompressedPath ? 0 : move_spline.spline.getPointCount() - 3;
        //int32 splineWpCount = move_spline.splineflags & MoveSplineFlag::UncompressedPath ? 1 : move_spline.spline.getPointCount() - 3;
        data.WriteBits(splineWpCount, 22); // WP count
        data.WriteBit(1);
        data.WriteBit(0);

        data.WriteBit(guid[0]);
        data.WriteBit(transport[3]);
        data.WriteBit(transport[6]);
        data.WriteBit(transport[5]);
        data.WriteBit(transport[0]);
        data.WriteBit(transport[1]);
        data.WriteBit(transport[2]);
        data.WriteBit(transport[4]);
        data.WriteBit(transport[7]);

        data.WriteBit(1);
        data.WriteBit(1); // Parabolic speed // esi+4Ch
        data.WriteBit(1);

        //data.WriteBits(!splineWpCount ? move_spline.spline.getPointCount() - 2 : 1, 20);
        data.WriteBits(!splineWpCount ? move_spline.spline.getPointCount() - (move_spline.splineflags.cyclic ? 2 : 3) : 1, 20);

        data.WriteBit(guid[1]);
        data.WriteBit(0); // Send no block
        data.WriteBit(0);
        data.WriteBit(!move_spline.Duration());

        data.FlushBits();

        if (type == 3)
        {
            ObjectGuid targetGuid = move_spline.facing.target;
            data.WriteByteSeq(targetGuid[5]);
//.........这里部分代码省略.........
开发者ID:JiniaTS,项目名称:SkyFire_5xx,代码行数:101,代码来源:MovementPacketBuilder.cpp

示例7: WriteCreateData

    void PacketBuilder::WriteCreateData(MoveSpline const& moveSpline, ByteBuffer& data, Unit* unit)
    {
        if (/*!moveSpline.Finalized()*/true)
        {
            MoveSplineFlag splineFlags = moveSpline.splineflags;

            uint8 splineType = 0;
            switch (splineFlags & MoveSplineFlag::Mask_Final_Facing)
            {
                case MoveSplineFlag::Final_Target:
                    splineType = MonsterMoveFacingTarget;
                    break;
                case MoveSplineFlag::Final_Angle:
                    splineType = MonsterMoveFacingAngle;
                    break;
                case MoveSplineFlag::Final_Point:
                    splineType = MonsterMoveFacingSpot;
                    break;
                default:
                    splineType = MonsterMoveNormal;
                    break;
            }

            data << float(1.0f);                             // splineInfo.duration_mod_next; added in 3.1
            uint32 nodes = moveSpline.getPath().size();
            for (uint32 i = 0; i < nodes; ++i)
            {
                data << float(moveSpline.getPath()[i].z);
                data << float(moveSpline.getPath()[i].y);
                data << float(moveSpline.getPath()[i].x);
            }

            data << uint8(splineType);
            data << float(1.0f);                             // splineInfo.duration_mod; added in 3.1

            if (splineFlags.final_point)
                data << moveSpline.facing.f.x << moveSpline.facing.f.y << moveSpline.facing.f.z;

            if (splineFlags.parabolic)
                data << moveSpline.vertical_acceleration;   // added in 3.1

            if (splineFlags.final_angle)
                data << moveSpline.facing.angle;

            data << moveSpline.Duration();

            if (splineFlags.parabolic || splineFlags.animation)
                data << moveSpline.effect_start_time;       // added in 3.1

            data << moveSpline.timePassed();
        }

        if (!moveSpline.isCyclic())
        {
            Vector3 dest = moveSpline.FinalDestination();
            data << moveSpline.GetId();
            data << float(dest.x);
            data << float(dest.y);
            data << float(dest.z);
        }
        else
        {
            data << moveSpline.GetId();
            data << float(0.0f);
            data << float(0.0f);
            data << float(0.0f);
        }
    }
开发者ID:Cailiaock,项目名称:5.4.7-Wow-source,代码行数:68,代码来源:MovementPacketBuilder.cpp


注:本文中的MoveSpline::FinalDestination方法示例由纯净天空整理自Github/MSDocs等开源代码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。