C++ MapSector::getBlocks方法代码示例

void ClientMap::updateDrawList(video::IVideoDriver* driver)
{
	ScopeProfiler sp(g_profiler, "CM::updateDrawList()", SPT_AVG);
	g_profiler->add("CM::updateDrawList() count", 1);

	INodeDefManager *nodemgr = m_gamedef->ndef();

	for(std::map<v3s16, MapBlock*>::iterator
			i = m_drawlist.begin();
			i != m_drawlist.end(); ++i)
	{
		MapBlock *block = i->second;
		block->refDrop();
	}
	m_drawlist.clear();

	m_camera_mutex.Lock();
	v3f camera_position = m_camera_position;
	v3f camera_direction = m_camera_direction;
	f32 camera_fov = m_camera_fov;
	m_camera_mutex.Unlock();

	// Use a higher fov to accomodate faster camera movements.
	// Blocks are cropped better when they are drawn.
	// Or maybe they aren't? Well whatever.
	camera_fov *= 1.2;

	v3s16 cam_pos_nodes = floatToInt(camera_position, BS);
	v3s16 box_nodes_d = m_control.wanted_range * v3s16(1,1,1);
	v3s16 p_nodes_min = cam_pos_nodes - box_nodes_d;
	v3s16 p_nodes_max = cam_pos_nodes + box_nodes_d;
	// Take a fair amount as we will be dropping more out later
	// Umm... these additions are a bit strange but they are needed.
	v3s16 p_blocks_min(
			p_nodes_min.X / MAP_BLOCKSIZE - 3,
			p_nodes_min.Y / MAP_BLOCKSIZE - 3,
			p_nodes_min.Z / MAP_BLOCKSIZE - 3);
	v3s16 p_blocks_max(
			p_nodes_max.X / MAP_BLOCKSIZE + 1,
			p_nodes_max.Y / MAP_BLOCKSIZE + 1,
			p_nodes_max.Z / MAP_BLOCKSIZE + 1);
	
	// Number of blocks in rendering range
	u32 blocks_in_range = 0;
	// Number of blocks occlusion culled
	u32 blocks_occlusion_culled = 0;
	// Number of blocks in rendering range but don't have a mesh
	u32 blocks_in_range_without_mesh = 0;
	// Blocks that had mesh that would have been drawn according to
	// rendering range (if max blocks limit didn't kick in)
	u32 blocks_would_have_drawn = 0;
	// Blocks that were drawn and had a mesh
	u32 blocks_drawn = 0;
	// Blocks which had a corresponding meshbuffer for this pass
	//u32 blocks_had_pass_meshbuf = 0;
	// Blocks from which stuff was actually drawn
	//u32 blocks_without_stuff = 0;

	for(std::map<v2s16, MapSector*>::iterator
			si = m_sectors.begin();
			si != m_sectors.end(); ++si)
	{
		MapSector *sector = si->second;
		v2s16 sp = sector->getPos();
		
		if(m_control.range_all == false)
		{
			if(sp.X < p_blocks_min.X
			|| sp.X > p_blocks_max.X
			|| sp.Y < p_blocks_min.Z
			|| sp.Y > p_blocks_max.Z)
				continue;
		}

		std::list< MapBlock * > sectorblocks;
		sector->getBlocks(sectorblocks);
		
		/*
			Loop through blocks in sector
		*/

		u32 sector_blocks_drawn = 0;
		
		std::list< MapBlock * >::iterator i;
		for(i=sectorblocks.begin(); i!=sectorblocks.end(); i++)
		{
			MapBlock *block = *i;

			/*
				Compare block position to camera position, skip
				if not seen on display
			*/
			
			float range = 100000 * BS;
			if(m_control.range_all == false)
				range = m_control.wanted_range * BS;

			float d = 0.0;
			if(isBlockInSight(block->getPos(), camera_position,
					camera_direction, camera_fov,
//.........这里部分代码省略.........

void ClientMap::updateDrawList(video::IVideoDriver* driver)
{
	ScopeProfiler sp(g_profiler, "CM::updateDrawList()", SPT_AVG);
	g_profiler->add("CM::updateDrawList() count", 1);

	for (std::map<v3s16, MapBlock*>::iterator i = m_drawlist.begin();
			i != m_drawlist.end(); ++i) {
		MapBlock *block = i->second;
		block->refDrop();
	}
	m_drawlist.clear();

	v3f camera_position = m_camera_position;
	v3f camera_direction = m_camera_direction;
	f32 camera_fov = m_camera_fov;

	// Use a higher fov to accomodate faster camera movements.
	// Blocks are cropped better when they are drawn.
	// Or maybe they aren't? Well whatever.
	camera_fov *= 1.2;

	v3s16 cam_pos_nodes = floatToInt(camera_position, BS);
	v3s16 p_blocks_min;
	v3s16 p_blocks_max;
	getBlocksInViewRange(cam_pos_nodes, &p_blocks_min, &p_blocks_max);

	// Number of blocks in rendering range
	u32 blocks_in_range = 0;
	// Number of blocks occlusion culled
	u32 blocks_occlusion_culled = 0;
	// Number of blocks in rendering range but don't have a mesh
	u32 blocks_in_range_without_mesh = 0;
	// Blocks that had mesh that would have been drawn according to
	// rendering range (if max blocks limit didn't kick in)
	u32 blocks_would_have_drawn = 0;
	// Blocks that were drawn and had a mesh
	u32 blocks_drawn = 0;
	// Blocks which had a corresponding meshbuffer for this pass
	//u32 blocks_had_pass_meshbuf = 0;
	// Blocks from which stuff was actually drawn
	//u32 blocks_without_stuff = 0;
	// Distance to farthest drawn block
	float farthest_drawn = 0;

	// No occlusion culling when free_move is on and camera is
	// inside ground
	bool occlusion_culling_enabled = true;
	if (g_settings->getBool("free_move")) {
		MapNode n = getNodeNoEx(cam_pos_nodes);
		if (n.getContent() == CONTENT_IGNORE ||
				m_nodedef->get(n).solidness == 2)
			occlusion_culling_enabled = false;
	}

	for (std::map<v2s16, MapSector*>::iterator si = m_sectors.begin();
			si != m_sectors.end(); ++si) {
		MapSector *sector = si->second;
		v2s16 sp = sector->getPos();

		if (m_control.range_all == false) {
			if (sp.X < p_blocks_min.X || sp.X > p_blocks_max.X ||
					sp.Y < p_blocks_min.Z || sp.Y > p_blocks_max.Z)
				continue;
		}

		MapBlockVect sectorblocks;
		sector->getBlocks(sectorblocks);

		/*
			Loop through blocks in sector
		*/

		u32 sector_blocks_drawn = 0;

		for (MapBlockVect::iterator i = sectorblocks.begin();
				i != sectorblocks.end(); ++i) {
			MapBlock *block = *i;

			/*
				Compare block position to camera position, skip
				if not seen on display
			*/

			if (block->mesh)
				block->mesh->updateCameraOffset(m_camera_offset);

			float range = 100000 * BS;
			if (!m_control.range_all)
				range = m_control.wanted_range * BS;

			float d = 0.0;
			if (!isBlockInSight(block->getPos(), camera_position,
					camera_direction, camera_fov, range, &d))
				continue;

			blocks_in_range++;

			/*
				Ignore if mesh doesn't exist
			*/
//.........这里部分代码省略.........

//.........这里部分代码省略.........
	// Blocks that were drawn and had a mesh
	u32 blocks_drawn = 0;
	// Blocks which had a corresponding meshbuffer for this pass
	u32 blocks_had_pass_meshbuf = 0;
	// Blocks from which stuff was actually drawn
	u32 blocks_without_stuff = 0;

	/*
		Collect a set of blocks for drawing
	*/
	
	core::map<v3s16, MapBlock*> drawset;

	{
	ScopeProfiler sp(g_profiler, prefix+"collecting blocks for drawing", SPT_AVG);

	for(core::map<v2s16, MapSector*>::Iterator
			si = m_sectors.getIterator();
			si.atEnd() == false; si++)
	{
		MapSector *sector = si.getNode()->getValue();
		v2s16 sp = sector->getPos();
		
		if(m_control.range_all == false)
		{
			if(sp.X < p_blocks_min.X
			|| sp.X > p_blocks_max.X
			|| sp.Y < p_blocks_min.Z
			|| sp.Y > p_blocks_max.Z)
				continue;
		}

		core::list< MapBlock * > sectorblocks;
		sector->getBlocks(sectorblocks);
		
		/*
			Loop through blocks in sector
		*/

		u32 sector_blocks_drawn = 0;
		
		core::list< MapBlock * >::Iterator i;
		for(i=sectorblocks.begin(); i!=sectorblocks.end(); i++)
		{
			MapBlock *block = *i;

			/*
				Compare block position to camera position, skip
				if not seen on display
			*/
			
			float range = 100000 * BS;
			if(m_control.range_all == false)
				range = m_control.wanted_range * BS;

			float d = 0.0;
			if(isBlockInSight(block->getPos(), camera_position,
					camera_direction, camera_fov,
					range, &d) == false)
			{
				continue;
			}

			// This is ugly (spherical distance limit?)
			/*if(m_control.range_all == false &&
					d - 0.5*BS*MAP_BLOCKSIZE > range)