本文整理汇总了C++中MapLine::setS2方法的典型用法代码示例。如果您正苦于以下问题：C++ MapLine::setS2方法的具体用法？C++ MapLine::setS2怎么用？C++ MapLine::setS2使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类MapLine的用法示例。
在下文中一共展示了MapLine::setS2方法的2个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: findInMap
/* MapArchClipboardItem::pasteToMap
* Pastes copied architecture to [map] at [position]
*******************************************************************/
vector<MapVertex*> MapArchClipboardItem::pasteToMap(SLADEMap* map, fpoint2_t position)
{
std::map<MapVertex*, MapVertex*> vertMap;
std::map<MapSector*, MapSector*> sectMap;
std::map<MapSide*, MapSide*> sideMap;
// Not used yet...
// std::map<MapLine*, MapLine*> lineMap;
// Add vertices
vector<MapVertex*> new_verts;
for (unsigned a = 0; a < vertices.size(); a++)
{
new_verts.push_back(map->createVertex(position.x + vertices[a]->xPos(), position.y + vertices[a]->yPos()));
new_verts.back()->copy(vertices[a]);
vertMap[vertices[a]] = new_verts.back();
}
// Add sectors
for (unsigned a = 0; a < sectors.size(); a++)
{
MapSector* new_sector = map->createSector();
new_sector->copy(sectors[a]);
sectMap[sectors[a]] = new_sector;
}
// Add sides
int first_new_side = map->nSides();
for (unsigned a = 0; a < sides.size(); a++)
{
// Get relative sector
MapSector* sector = findInMap(sectMap, sides[a]->getSector());
MapSide* new_side = map->createSide(sector);
new_side->copy(sides[a]);
sideMap[sides[a]] = new_side;
}
// Add lines
int first_new_line = map->nLines();
for (unsigned a = 0; a < lines.size(); a++)
{
// Get relative vertices
MapVertex* v1 = findInMap(vertMap, lines[a]->v1());
MapVertex* v2 = findInMap(vertMap, lines[a]->v2());
if (!v1)
{
wxLogMessage("no v1");
continue;
}
if (!v2)
{
wxLogMessage("no v2");
}
MapLine* newline = map->createLine(v1, v2, true);
newline->copy(lines[a]);
// lineMap[lines[a]] = newline;
// Set relative sides
bool s1 = false;
bool s2 = !(lines[a]->s2());
MapSide* newS1 = findInMap(sideMap, lines[a]->s1());
MapSide* newS2 = findInMap(sideMap, lines[a]->s2());
if(newS1)
newline->setS1(newS1);
if(newS2)
newline->setS2(newS2);
// Set important flags (needed when copying from Doom/Hexen format to UDMF)
// Won't be needed when proper map format conversion stuff is implemented
theGameConfiguration->setLineBasicFlag(
"twosided",
newline,
map->currentFormat(),
(newS1 && newS2)
);
theGameConfiguration->setLineBasicFlag(
"blocking",
newline,
map->currentFormat(),
!newS2
);
}
// TODO:
// - Split lines
// - Merge lines
//// Fix sector references
//// TODO: figure out what lines are 'outside' on copy, only fix said lines
//for (unsigned a = first_new_line; a < map->nLines(); a++)
//{
// MapLine* line = map->getLine(a);
// MapSector* sec1 = map->getLineSideSector(line, true);
// MapSector* sec2 = map->getLineSideSector(line, false);
// int i1 = -1;
//.........这里部分代码省略.........
示例2: findInMap
/* MapArchClipboardItem::pasteToMap
* Pastes copied architecture to [map] at [position]
*******************************************************************/
vector<MapVertex*> MapArchClipboardItem::pasteToMap(SLADEMap* map, fpoint2_t position)
{
std::map<MapVertex*, MapVertex*> vertMap;
std::map<MapSector*, MapSector*> sectMap;
std::map<MapSide*, MapSide*> sideMap;
// Not used yet...
// std::map<MapLine*, MapLine*> lineMap;
// Add vertices
vector<MapVertex*> new_verts;
for (unsigned a = 0; a < vertices.size(); a++)
{
new_verts.push_back(map->createVertex(position.x + vertices[a]->xPos(), position.y + vertices[a]->yPos()));
new_verts.back()->copy(vertices[a]);
vertMap[vertices[a]] = new_verts.back();
}
// Add sectors
for (unsigned a = 0; a < sectors.size(); a++)
{
MapSector* new_sector = map->createSector();
new_sector->copy(sectors[a]);
sectMap[sectors[a]] = new_sector;
}
// Add sides
int first_new_side = map->nSides();
for (unsigned a = 0; a < sides.size(); a++)
{
// Get relative sector
MapSector* sector = findInMap(sectMap, sides[a]->getSector());
MapSide* new_side = map->createSide(sector);
new_side->copy(sides[a]);
sideMap[sides[a]] = new_side;
}
// Add lines
int first_new_line = map->nLines();
for (unsigned a = 0; a < lines.size(); a++)
{
// Get relative vertices
MapVertex* v1 = findInMap(vertMap, lines[a]->v1());
MapVertex* v2 = findInMap(vertMap, lines[a]->v2());
if (!v1)
{
wxLogMessage("no v1");
continue;
}
if (!v2)
{
wxLogMessage("no v2");
}
MapLine* newline = map->createLine(v1, v2, true);
newline->copy(lines[a]);
// lineMap[lines[a]] = newline;
// Set relative sides
bool s1 = false;
bool s2 = !(lines[a]->s2());
MapSide* newS1 = findInMap(sideMap, lines[a]->s1());
MapSide* newS2 = findInMap(sideMap, lines[a]->s2());
if(newS1)
newline->setS1(newS1);
if(newS2)
newline->setS2(newS2);
}
// TODO:
// - Split lines
// - Merge lines
// Fix sector references
// TODO: figure out what lines are 'outside' on copy, only fix said lines
for (unsigned a = first_new_line; a < map->nLines(); a++)
{
MapLine* line = map->getLine(a);
MapSector* sec1 = map->getLineSideSector(line, true);
MapSector* sec2 = map->getLineSideSector(line, false);
int i1 = -1;
int i2 = -2;
if (sec1) i1 = sec1->getIndex();
if (sec2) i2 = sec2->getIndex();
map->setLineSector(a, i1, true);
map->setLineSector(a, i2, false);
}
return new_verts;
}