本文整理汇总了C++中MEM_NB_BLOCK::CompareTestPattern方法的典型用法代码示例。如果您正苦于以下问题：C++ MEM_NB_BLOCK::CompareTestPattern方法的具体用法？C++ MEM_NB_BLOCK::CompareTestPattern怎么用？C++ MEM_NB_BLOCK::CompareTestPattern使用的例子？那么, 这里精选的方法代码示例或许可以为您提供帮助。您也可以进一步了解该方法所在类MEM_NB_BLOCK的用法示例。
在下文中一共展示了MEM_NB_BLOCK::CompareTestPattern方法的1个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于系统推荐出更棒的C++代码示例。
示例1: MemTBeginTraining
BOOLEAN
MemTTrainMaxLatency (
IN OUT MEM_TECH_BLOCK *TechPtr
)
{
UINT32 TestAddrRJ16;
UINT8 Dct;
UINT8 ChipSel;
UINT8 *PatternBufPtr;
UINT8 *TestBufferPtr;
UINT8 CurrentNbPstate;
UINT16 CalcMaxLatDly;
UINT16 MaxLatDly;
UINT16 MaxLatLimit;
UINT16 Margin;
UINT16 CurTest;
UINT16 _CL_;
UINT8 TimesFail;
UINT8 TimesRetrain;
UINT16 i;
MEM_DATA_STRUCT *MemPtr;
DIE_STRUCT *MCTPtr;
MEM_NB_BLOCK *NBPtr;
NBPtr = TechPtr->NBPtr;
MCTPtr = NBPtr->MCTPtr;
MemPtr = NBPtr->MemPtr;
TechPtr->TrainingType = TRN_MAX_READ_LATENCY;
TimesRetrain = DEFAULT_TRAINING_TIMES;
IDS_OPTION_HOOK (IDS_MEM_RETRAIN_TIMES, &TimesRetrain, &MemPtr->StdHeader);
IDS_HDT_CONSOLE (MEM_STATUS, "\nStart MaxRdLat training\n");
// Set environment settings before training
AGESA_TESTPOINT (TpProcMemMaxRdLatencyTraining, &(MemPtr->StdHeader));
MemTBeginTraining (TechPtr);
//
// Initialize the Training Pattern
//
if (AGESA_SUCCESS != NBPtr->TrainingPatternInit (NBPtr)) {
return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
}
TechPtr->PatternLength = (MCTPtr->Status[Sb128bitmode]) ? 6 : 3;
//
// Setup hardware training engine (if applicable)
//
NBPtr->FamilySpecificHook[SetupHwTrainingEngine] (NBPtr, &TechPtr->TrainingType);
MaxLatDly = 0;
_CL_ = TechPtr->PatternLength;
PatternBufPtr = TechPtr->PatternBufPtr;
TestBufferPtr = TechPtr->TestBufPtr;
//
// Begin max latency training
//
for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
if (MCTPtr->Status[Sb128bitmode] && (Dct != 0)) {
break;
}
IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
NBPtr->SwitchDCT (NBPtr, Dct);
if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
if (TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &ChipSel)) {
TechPtr->ChipSel = ChipSel;
if (NBPtr->GetSysAddr (NBPtr, ChipSel, &TestAddrRJ16)) {
IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrite to address: %04x0000\n", TestAddrRJ16);
// Write the test patterns
AGESA_TESTPOINT (TpProcMemMaxRdLatWritePattern, &(MemPtr->StdHeader));
NBPtr->WritePattern (NBPtr, TestAddrRJ16, PatternBufPtr, _CL_);
// Sweep max latency delays
NBPtr->getMaxLatParams (NBPtr, TechPtr->MaxDlyForMaxRdLat, &CalcMaxLatDly, &MaxLatLimit, &Margin);
AGESA_TESTPOINT (TpProcMemMaxRdLatStartSweep, &(MemPtr->StdHeader));
TimesFail = 0;
ERROR_HANDLE_RETRAIN_BEGIN (TimesFail, TimesRetrain)
{
MaxLatDly = CalcMaxLatDly;
for (i = 0; i < (MaxLatLimit - CalcMaxLatDly); i++) {
NBPtr->SetBitField (NBPtr, BFMaxLatency, MaxLatDly);
IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tDly %3x", MaxLatDly);
TechPtr->ResetDCTWrPtr (TechPtr, 6);
AGESA_TESTPOINT (TpProcMemMaxRdLatReadPattern, &(MemPtr->StdHeader));
NBPtr->ReadPattern (NBPtr, TestBufferPtr, TestAddrRJ16, _CL_);
AGESA_TESTPOINT (TpProcMemMaxRdLatTestPattern, &(MemPtr->StdHeader));
CurTest = NBPtr->CompareTestPattern (NBPtr, TestBufferPtr, PatternBufPtr, _CL_ * 64);
NBPtr->FlushPattern (NBPtr, TestAddrRJ16, _CL_);
if (NBPtr->IsSupported[ReverseMaxRdLatTrain]) {
// Reverse training decrements MaxLatDly whenever the test passes
// and uses the last passing MaxLatDly as left edge
if (CurTest == 0xFFFF) {
IDS_HDT_CONSOLE (MEM_FLOW, " P");
if (MaxLatDly == 0) {
break;
//.........这里部分代码省略.........