C++ LIB_PART::GetLib方法代码示例

XNODE* NETLIST_EXPORTER_GENERIC::makeComponents()
{
    XNODE*      xcomps = node( wxT( "components" ) );

    wxString    timeStamp;

    // some strings we need many times, but don't want to construct more
    // than once for performance.  These are used within loops so the
    // enclosing wxString constructor would fire on each loop iteration if
    // they were in a nested scope.

    // these are actually constructor invocations, not assignments as it appears:
    wxString    sFields     = wxT( "fields" );
    wxString    sField      = wxT( "field" );
    wxString    sComponent  = wxT( "comp" );          // use "part" ?
    wxString    sName       = wxT( "name" );
    wxString    sRef        = wxT( "ref" );
    wxString    sPins       = wxT( "pins" );
    wxString    sPin        = wxT( "pin" );
    wxString    sValue      = wxT( "value" );
    wxString    sSheetPath  = wxT( "sheetpath" );
    wxString    sFootprint  = wxT( "footprint" );
    wxString    sDatasheet  = wxT( "datasheet" );
    wxString    sTStamp     = wxT( "tstamp" );
    wxString    sTStamps    = wxT( "tstamps" );
    wxString    sTSFmt      = wxT( "%8.8lX" );        // comp->m_TimeStamp
    wxString    sLibSource  = wxT( "libsource" );
    wxString    sLibPart    = wxT( "libpart" );
    wxString    sLib        = wxT( "lib" );
    wxString    sPart       = wxT( "part" );
    wxString    sNames      = wxT( "names" );

    m_ReferencesAlreadyFound.Clear();

    SCH_SHEET_LIST sheetList( g_RootSheet );

    // Output is xml, so there is no reason to remove spaces from the field values.
    // And XML element names need not be translated to various languages.

    for( unsigned i = 0;  i < sheetList.size();  i++ )
    {
        for( EDA_ITEM* schItem = sheetList[i].LastDrawList();  schItem;  schItem = schItem->Next() )
        {
            SCH_COMPONENT*  comp = findNextComponentAndCreatePinList( schItem, &sheetList[i] );
            if( !comp )
                break;  // No component left

            schItem = comp;

            XNODE* xcomp;  // current component being constructed

            // Output the component's elements in order of expected access frequency.
            // This may not always look best, but it will allow faster execution
            // under XSL processing systems which do sequential searching within
            // an element.

            xcomps->AddChild( xcomp = node( sComponent ) );
            xcomp->AddAttribute( sRef, comp->GetRef( &sheetList[i] ) );

            xcomp->AddChild( node( sValue, comp->GetField( VALUE )->GetText() ) );

            if( !comp->GetField( FOOTPRINT )->IsVoid() )
                xcomp->AddChild( node( sFootprint, comp->GetField( FOOTPRINT )->GetText() ) );

            if( !comp->GetField( DATASHEET )->IsVoid() )
                xcomp->AddChild( node( sDatasheet, comp->GetField( DATASHEET )->GetText() ) );

            // Export all user defined fields within the component,
            // which start at field index MANDATORY_FIELDS.  Only output the <fields>
            // container element if there are any <field>s.
            if( comp->GetFieldCount() > MANDATORY_FIELDS )
            {
                XNODE* xfields;
                xcomp->AddChild( xfields = node( sFields ) );

                for( int fldNdx = MANDATORY_FIELDS; fldNdx < comp->GetFieldCount(); ++fldNdx )
                {
                    SCH_FIELD*  f = comp->GetField( fldNdx );

                    // only output a field if non empty and not just "~"
                    if( !f->IsVoid() )
                    {
                        XNODE*  xfield;
                        xfields->AddChild( xfield = node( sField, f->GetText() ) );
                        xfield->AddAttribute( sName, f->GetName() );
                    }
                }
            }

            XNODE*  xlibsource;
            xcomp->AddChild( xlibsource = node( sLibSource ) );

            // "logical" library name, which is in anticipation of a better search
            // algorithm for parts based on "logical_lib.part" and where logical_lib
            // is merely the library name minus path and extension.
            LIB_PART* part = m_libs->FindLibPart( comp->GetLibId() );
            if( part )
                xlibsource->AddAttribute( sLib, part->GetLib()->GetLogicalName() );

            // We only want the symbol name, not the full LIB_ID.
//.........这里部分代码省略.........

XNODE* NETLIST_EXPORTER_GENERIC::makeLibParts()
{
    XNODE*      xlibparts = node( wxT( "libparts" ) );   // auto_ptr
    wxString    sLibpart  = wxT( "libpart" );
    wxString    sLib      = wxT( "lib" );
    wxString    sPart     = wxT( "part" );
    wxString    sAliases  = wxT( "aliases" );
    wxString    sAlias    = wxT( "alias" );
    wxString    sPins     = wxT( "pins" );      // key for library component pins list
    wxString    sPin      = wxT( "pin" );       // key for one library component pin descr
    wxString    sPinNum   = wxT( "num" );       // key for one library component pin num
    wxString    sPinName  = wxT( "name" );      // key for one library component pin name
    wxString    sPinType  = wxT( "type" );      // key for one library component pin electrical type
    wxString    sName     = wxT( "name" );
    wxString    sField    = wxT( "field" );
    wxString    sFields   = wxT( "fields" );
    wxString    sDescr    = wxT( "description" );
    wxString    sDocs     = wxT( "docs" );
    wxString    sFprints  = wxT( "footprints" );
    wxString    sFp       = wxT( "fp" );

    LIB_PINS    pinList;
    LIB_FIELDS  fieldList;

    m_Libraries.clear();

    for( std::set<LIB_PART*>::iterator it = m_LibParts.begin(); it!=m_LibParts.end();  ++it )
    {
        LIB_PART* lcomp = *it;
        PART_LIB* library = lcomp->GetLib();

        m_Libraries.insert( library );  // inserts component's library if unique

        XNODE* xlibpart;
        xlibparts->AddChild( xlibpart = node( sLibpart ) );
        xlibpart->AddAttribute( sLib, library->GetLogicalName() );
        xlibpart->AddAttribute( sPart, lcomp->GetName()  );

        if( lcomp->GetAliasCount() )
        {
            wxArrayString aliases = lcomp->GetAliasNames( false );
            if( aliases.GetCount() )
            {
                XNODE* xaliases = node( sAliases );
                xlibpart->AddChild( xaliases );
                for( unsigned i=0;  i<aliases.GetCount();  ++i )
                {
                    xaliases->AddChild( node( sAlias, aliases[i] ) );
                }
            }
        }

        //----- show the important properties -------------------------
        if( !lcomp->GetAlias( 0 )->GetDescription().IsEmpty() )
            xlibpart->AddChild( node( sDescr, lcomp->GetAlias( 0 )->GetDescription() ) );

        if( !lcomp->GetAlias( 0 )->GetDocFileName().IsEmpty() )
            xlibpart->AddChild( node( sDocs,  lcomp->GetAlias( 0 )->GetDocFileName() ) );

        // Write the footprint list
        if( lcomp->GetFootPrints().GetCount() )
        {
            XNODE*  xfootprints;
            xlibpart->AddChild( xfootprints = node( sFprints ) );

            for( unsigned i=0; i<lcomp->GetFootPrints().GetCount(); ++i )
            {
                xfootprints->AddChild( node( sFp, lcomp->GetFootPrints()[i] ) );
            }
        }

        //----- show the fields here ----------------------------------
        fieldList.clear();
        lcomp->GetFields( fieldList );

        XNODE*     xfields;
        xlibpart->AddChild( xfields = node( sFields ) );

        for( unsigned i=0;  i<fieldList.size();  ++i )
        {
            if( !fieldList[i].GetText().IsEmpty() )
            {
                XNODE*     xfield;
                xfields->AddChild( xfield = node( sField, fieldList[i].GetText() ) );
                xfield->AddAttribute( sName, fieldList[i].GetName(false) );
            }
        }

        //----- show the pins here ------------------------------------
        pinList.clear();
        lcomp->GetPins( pinList, 0, 0 );

        /* we must erase redundant Pins references in pinList
         * These redundant pins exist because some pins
         * are found more than one time when a component has
         * multiple parts per package or has 2 representations (DeMorgan conversion)
         * For instance, a 74ls00 has DeMorgan conversion, with different pin shapes,
         * and therefore each pin  appears 2 times in the list.
         * Common pins (VCC, GND) can also be found more than once.
         */
//.........这里部分代码省略.........