C++ GrRect::setLTRB方法代码示例

////////////////////////////////////////////////////////////////////////////////
// Shared preamble between gpu and SW-only AA clip mask creation paths.
// Handles caching, determination of clip mask bound & allocation (if needed)
// of the result texture
// Returns true if there is no more work to be done (i.e., we got a cache hit)
bool GrClipMaskManager::clipMaskPreamble(GrGpu* gpu,
                                         const GrClip& clipIn,
                                         GrTexture** result,
                                         GrIRect *resultBounds) {
    GrDrawState* origDrawState = gpu->drawState();
    GrAssert(origDrawState->isClipState());

    GrRenderTarget* rt = origDrawState->getRenderTarget();
    GrAssert(NULL != rt);

    GrRect rtRect;
    rtRect.setLTRB(0, 0,
                    GrIntToScalar(rt->width()), GrIntToScalar(rt->height()));

    // unlike the stencil path the alpha path is not bound to the size of the
    // render target - determine the minimum size required for the mask
    GrRect bounds;

    if (clipIn.hasConservativeBounds()) {
        bounds = clipIn.getConservativeBounds();
        if (!bounds.intersect(rtRect)) {
            // the mask will be empty in this case
            GrAssert(false);
            bounds.setEmpty();
        }
    } else {
        // still locked to the size of the render target
        bounds = rtRect;
    }

    GrIRect intBounds;
    bounds.roundOut(&intBounds);

    // need to outset a pixel since the standard bounding box computation
    // path doesn't leave any room for antialiasing (esp. w.r.t. rects)
    intBounds.outset(1, 1);

    // TODO: make sure we don't outset if bounds are still 0,0 @ min

    if (fAACache.canReuse(clipIn, 
                          intBounds.width(),
                          intBounds.height())) {
        *result = fAACache.getLastMask();
        fAACache.getLastBound(resultBounds);
        return true;
    }

    this->setupCache(clipIn, intBounds);

    *resultBounds = intBounds;
    return false;
}

//.........这里部分代码省略.........
                case kWinding_PathFill:
                    if (fSeparateStencil) {
                        if (fStencilWrapOps) {
                            passes[0] = &gWindStencilSeparateWithWrap;
                        } else {
                            passes[0] = &gWindStencilSeparateNoWrap;
                        }
                        passCount = 2;
                        drawFace[0] = GrDrawTarget::kBoth_DrawFace;
                    } else {
                        if (fStencilWrapOps) {
                            passes[0] = &gWindSingleStencilWithWrapInc;
                            passes[1] = &gWindSingleStencilWithWrapDec;
                        } else {
                            passes[0] = &gWindSingleStencilNoWrapInc;
                            passes[1] = &gWindSingleStencilNoWrapDec;
                        }
                        // which is cw and which is ccw is arbitrary.
                        drawFace[0] = GrDrawTarget::kCW_DrawFace;
                        drawFace[1] = GrDrawTarget::kCCW_DrawFace;
                        passCount = 3;
                    }
                    if (stencilOnly) {
                        lastPassIsBounds = false;
                        --passCount;
                    } else {
                        lastPassIsBounds = true;
                        drawFace[passCount-1] = GrDrawTarget::kBoth_DrawFace;
                        if (reverse) {
                            passes[passCount-1] = &gInvWindColorPass;
                        } else {
                            passes[passCount-1] = &gWindColorPass;
                        }
                    }
                    break;
                default:
                    GrAssert(!"Unknown path fFill!");
                    return;
            }
        }
    }

    {
    for (int p = 0; p < passCount; ++p) {
        fTarget->setDrawFace(drawFace[p]);
        if (NULL != passes[p]) {
            fTarget->setStencil(*passes[p]);
        }

        if (lastPassIsBounds && (p == passCount-1)) {
            if (!colorWritesWereDisabled) {
                fTarget->disableState(GrDrawTarget::kNoColorWrites_StateBit);
            }
            GrRect bounds;
            if (reverse) {
                GrAssert(NULL != fTarget->getRenderTarget());
                // draw over the whole world.
                bounds.setLTRB(0, 0,
                               GrIntToScalar(fTarget->getRenderTarget()->width()),
                               GrIntToScalar(fTarget->getRenderTarget()->height()));
                GrMatrix vmi;
                // mapRect through persp matrix may not be correct
                if (!fTarget->getViewMatrix().hasPerspective() &&
                    fTarget->getViewInverse(&vmi)) {
                    vmi.mapRect(&bounds);
                } else {
                    if (stages) {
                        if (!fTarget->getViewInverse(&vmi)) {
                            GrPrintf("Could not invert matrix.");
                            return;
                        }
                        fTarget->preConcatSamplerMatrices(stages, vmi);
                    }
                    fTarget->setViewMatrix(GrMatrix::I());
                }
            } else {
                bounds = fPath->getBounds();
                bounds.offset(fTranslate);
            }
            GrDrawTarget::AutoGeometryPush agp(fTarget);
            fTarget->drawSimpleRect(bounds, NULL, stages);
        } else {
            if (passCount > 1) {
                fTarget->enableState(GrDrawTarget::kNoColorWrites_StateBit);
            }
            if (fUseIndexedDraw) {
                fTarget->drawIndexed(fPrimitiveType, 0, 0, 
                                     fVertexCnt, fIndexCnt);
            } else {
                int baseVertex = 0;
                for (int sp = 0; sp < fSubpathCount; ++sp) {
                    fTarget->drawNonIndexed(fPrimitiveType, baseVertex,
                                            fSubpathVertCount[sp]);
                    baseVertex += fSubpathVertCount[sp];
                }
            }
        }
    }
    }
}

bool GrGpu::setupClipAndFlushState(GrPrimitiveType type) {
    const GrIRect* r = NULL;
    GrIRect clipRect;

    GrDrawState* drawState = this->drawState();
    const GrRenderTarget* rt = drawState->getRenderTarget();

    // GrDrawTarget should have filtered this for us
    GrAssert(NULL != rt);

    if (drawState->isClipState()) {

        GrRect bounds;
        GrRect rtRect;
        rtRect.setLTRB(0, 0,
                       GrIntToScalar(rt->width()), GrIntToScalar(rt->height()));
        if (fClip.hasConservativeBounds()) {
            bounds = fClip.getConservativeBounds();
            if (!bounds.intersect(rtRect)) {
                bounds.setEmpty();
            }
        } else {
            bounds = rtRect;
        }

        bounds.roundOut(&clipRect);
        if  (clipRect.isEmpty()) {
            clipRect.setLTRB(0,0,0,0);
        }
        r = &clipRect;

        // use the stencil clip if we can't represent the clip as a rectangle.
        fClipInStencil = !fClip.isRect() && !fClip.isEmpty() && 
                         !bounds.isEmpty();

        // TODO: dynamically attach a SB when needed.
        GrStencilBuffer* stencilBuffer = rt->getStencilBuffer();
        if (fClipInStencil && NULL == stencilBuffer) {
            return false;
        }

        if (fClipInStencil &&
            stencilBuffer->mustRenderClip(fClip, rt->width(), rt->height())) {

            stencilBuffer->setLastClip(fClip, rt->width(), rt->height());

            // we set the current clip to the bounds so that our recursive
            // draws are scissored to them. We use the copy of the complex clip
            // we just stashed on the SB to render from. We set it back after
            // we finish drawing it into the stencil.
            const GrClip& clip = stencilBuffer->getLastClip();
            fClip.setFromRect(bounds);

            AutoStateRestore asr(this);
            AutoGeometryPush agp(this);

            drawState->setViewMatrix(GrMatrix::I());
            this->flushScissor(NULL);
#if !VISUALIZE_COMPLEX_CLIP
            drawState->enableState(GrDrawState::kNoColorWrites_StateBit);
#else
            drawState->disableState(GrDrawState::kNoColorWrites_StateBit);
#endif
            int count = clip.getElementCount();
            int clipBit = stencilBuffer->bits();
            SkASSERT((clipBit <= 16) &&
                     "Ganesh only handles 16b or smaller stencil buffers");
            clipBit = (1 << (clipBit-1));
            
            bool clearToInside;
            GrSetOp startOp = kReplace_SetOp; // suppress warning
            int start = process_initial_clip_elements(clip,
                                                      rtRect,
                                                      &clearToInside,
                                                      &startOp);

            this->clearStencilClip(clipRect, clearToInside);

            // walk through each clip element and perform its set op
            // with the existing clip.
            for (int c = start; c < count; ++c) {
                GrPathFill fill;
                bool fillInverted;
                // enabled at bottom of loop
                drawState->disableState(kModifyStencilClip_StateBit);

                bool canRenderDirectToStencil; // can the clip element be drawn
                                               // directly to the stencil buffer
                                               // with a non-inverted fill rule
                                               // without extra passes to
                                               // resolve in/out status.

                GrPathRenderer* pr = NULL;
                const GrPath* clipPath = NULL;
                GrPathRenderer::AutoClearPath arp;
                if (kRect_ClipType == clip.getElementType(c)) {
                    canRenderDirectToStencil = true;
                    fill = kEvenOdd_PathFill;
                    fillInverted = false;
                    // there is no point in intersecting a screen filling
//.........这里部分代码省略.........

bool GrTesselatedPathRenderer::onDrawPath(const SkPath& path,
                                          GrPathFill fill,
                                          const GrVec* translate,
                                          GrDrawTarget* target,
                                          GrDrawState::StageMask stageMask,
                                          bool antiAlias) {

    GrDrawTarget::AutoStateRestore asr(target);
    GrDrawState* drawState = target->drawState();
    // face culling doesn't make sense here
    GrAssert(GrDrawState::kBoth_DrawFace == drawState->getDrawFace());

    GrMatrix viewM = drawState->getViewMatrix();

    GrScalar tol = GR_Scalar1;
    tol = GrPathUtils::scaleToleranceToSrc(tol, viewM, path.getBounds());
    GrScalar tolSqd = GrMul(tol, tol);

    int subpathCnt;
    int maxPts = GrPathUtils::worstCasePointCount(path, &subpathCnt, tol);

    GrVertexLayout layout = 0;
    for (int s = 0; s < GrDrawState::kNumStages; ++s) {
        if ((1 << s) & stageMask) {
            layout |= GrDrawTarget::StagePosAsTexCoordVertexLayoutBit(s);
        }
    }

    bool inverted = GrIsFillInverted(fill);
    if (inverted) {
        maxPts += 4;
        subpathCnt++;
    }
    if (maxPts > USHRT_MAX) {
        return false;
    }
    SkAutoSTMalloc<8, GrPoint> baseMem(maxPts);
    GrPoint* base = baseMem;
    GrPoint* vert = base;
    GrPoint* subpathBase = base;

    SkAutoSTMalloc<8, uint16_t> subpathVertCount(subpathCnt);

    GrPoint pts[4];
    SkPath::Iter iter(path, false);

    bool first = true;
    int subpath = 0;

    for (;;) {
        switch (iter.next(pts)) {
            case kMove_PathCmd:
                if (!first) {
                    subpathVertCount[subpath] = vert-subpathBase;
                    subpathBase = vert;
                    ++subpath;
                }
                *vert = pts[0];
                vert++;
                break;
            case kLine_PathCmd:
                *vert = pts[1];
                vert++;
                break;
            case kQuadratic_PathCmd: {
                GrPathUtils::generateQuadraticPoints(pts[0], pts[1], pts[2],
                                                     tolSqd, &vert,
                                                     GrPathUtils::quadraticPointCount(pts, tol));
                break;
            }
            case kCubic_PathCmd: {
                GrPathUtils::generateCubicPoints(pts[0], pts[1], pts[2], pts[3],
                                                 tolSqd, &vert,
                                                 GrPathUtils::cubicPointCount(pts, tol));
                break;
            }
            case kClose_PathCmd:
                break;
            case kEnd_PathCmd:
                subpathVertCount[subpath] = vert-subpathBase;
                ++subpath; // this could be only in debug
                goto FINISHED;
        }
        first = false;
    }
FINISHED:
    if (NULL != translate && 0 != translate->fX && 0 != translate->fY) {
        for (int i = 0; i < vert - base; i++) {
            base[i].offset(translate->fX, translate->fY);
        }
    }

    if (inverted) {
        GrRect bounds;
        GrAssert(NULL != drawState->getRenderTarget());
        bounds.setLTRB(0, 0,
                       GrIntToScalar(drawState->getRenderTarget()->width()),
                       GrIntToScalar(drawState->getRenderTarget()->height()));
        GrMatrix vmi;
        if (drawState->getViewInverse(&vmi)) {
//.........这里部分代码省略.........

////////////////////////////////////////////////////////////////////////////////
// sort out what kind of clip mask needs to be created: alpha, stencil,
// scissor, or entirely software
bool GrClipMaskManager::createClipMask(GrGpu* gpu, 
                                       const GrClip& clipIn,
                                       ScissoringSettings* scissorSettings) {

    GrAssert(scissorSettings);

    scissorSettings->fEnableScissoring = false;
    fClipMaskInStencil = false;
    fClipMaskInAlpha = false;

    GrDrawState* drawState = gpu->drawState();
    if (!drawState->isClipState()) {
        return true;
    }

    GrRenderTarget* rt = drawState->getRenderTarget();

    // GrDrawTarget should have filtered this for us
    GrAssert(NULL != rt);

#if GR_SW_CLIP
    if (create_mask_in_sw()) {
        // The clip geometry is complex enough that it will be more
        // efficient to create it entirely in software
        GrTexture* result = NULL;
        GrIRect bound;
        if (this->createSoftwareClipMask(gpu, clipIn, &result, &bound)) {
            fClipMaskInAlpha = true;

            setup_drawstate_aaclip(gpu, result, bound);
            return true;
        }
    }
#endif

#if GR_AA_CLIP
    // If MSAA is enabled use the (faster) stencil path for AA clipping
    // otherwise the alpha clip mask is our only option
    if (clipIn.requiresAA() && 0 == rt->numSamples()) {
        // Since we are going to create a destination texture of the correct
        // size for the mask (rather than being bound by the size of the
        // render target) we aren't going to use scissoring like the stencil
        // path does (see scissorSettings below)
        GrTexture* result = NULL;
        GrIRect bound;
        if (this->createAlphaClipMask(gpu, clipIn, &result, &bound)) {
            fClipMaskInAlpha = true;

            setup_drawstate_aaclip(gpu, result, bound);
            return true;
        }

        // if alpha clip mask creation fails fall through to the stencil
        // buffer method
    }
#endif // GR_AA_CLIP

    GrRect bounds;
    GrRect rtRect;
    rtRect.setLTRB(0, 0,
                    GrIntToScalar(rt->width()), GrIntToScalar(rt->height()));
    if (clipIn.hasConservativeBounds()) {
        bounds = clipIn.getConservativeBounds();
        if (!bounds.intersect(rtRect)) {
            bounds.setEmpty();
        }
    } else {
        bounds = rtRect;
    }

    bounds.roundOut(&scissorSettings->fScissorRect);
    if  (scissorSettings->fScissorRect.isEmpty()) {
        scissorSettings->fScissorRect.setLTRB(0,0,0,0);
        // TODO: I think we can do an early exit here - after refactoring try:
        //  set fEnableScissoring to true but leave fClipMaskInStencil false
        //  and return - everything is going to be scissored away anyway!
    }
    scissorSettings->fEnableScissoring = true;

    // use the stencil clip if we can't represent the clip as a rectangle.
    fClipMaskInStencil = !clipIn.isRect() && !clipIn.isEmpty() &&
                         !bounds.isEmpty();

    if (fClipMaskInStencil) {
        return this->createStencilClipMask(gpu, clipIn, bounds, scissorSettings);
    }

    return true;
}

bool GrStencilAndCoverPathRenderer::onDrawPath(const SkPath& path,
                                               GrPathFill fill,
                                               GrDrawTarget* target,
                                               bool antiAlias) {
    GrAssert(!antiAlias);
    GrAssert(kHairLine_GrPathFill != fill);

    GrDrawState* drawState = target->drawState();
    GrAssert(drawState->getStencil().isDisabled());

    SkAutoTUnref<GrPath> p(fGpu->createPath(path));

    GrPathFill nonInvertedFill = GrNonInvertedFill(fill);
    target->stencilPath(p, nonInvertedFill);

    // TODO: Use built in cover operation rather than a rect draw. This will require making our
    // fragment shaders be able to eat varyings generated by a matrix.

    // fill the path, zero out the stencil
    GrRect bounds = p->getBounds();
    GrScalar bloat = drawState->getViewMatrix().getMaxStretch() * GR_ScalarHalf;
    GrDrawState::AutoDeviceCoordDraw adcd;

    if (nonInvertedFill == fill) {
        GR_STATIC_CONST_SAME_STENCIL(kStencilPass,
            kZero_StencilOp,
            kZero_StencilOp,
            kNotEqual_StencilFunc,
            0xffff,
            0x0000,
            0xffff);
        *drawState->stencil() = kStencilPass;
    } else {
        GR_STATIC_CONST_SAME_STENCIL(kInvertedStencilPass,
            kZero_StencilOp,
            kZero_StencilOp,
            // We know our rect will hit pixels outside the clip and the user bits will be 0
            // outside the clip. So we can't just fill where the user bits are 0. We also need to
            // check that the clip bit is set.
            kEqualIfInClip_StencilFunc,
            0xffff,
            0x0000,
            0xffff);
        GrMatrix vmi;
        bounds.setLTRB(0, 0,
                       GrIntToScalar(drawState->getRenderTarget()->width()),
                       GrIntToScalar(drawState->getRenderTarget()->height()));
        // mapRect through persp matrix may not be correct
        if (!drawState->getViewMatrix().hasPerspective() && drawState->getViewInverse(&vmi)) {
            vmi.mapRect(&bounds);
            // theoretically could set bloat = 0, instead leave it because of matrix inversion
            // precision.
        } else {
            adcd.set(drawState);
            bloat = 0;
        }
        *drawState->stencil() = kInvertedStencilPass;
    }
    bounds.outset(bloat, bloat);
    target->drawSimpleRect(bounds, NULL);
    target->drawState()->stencil()->setDisabled();
    return true;
}

//.........这里部分代码省略.........

    for (;;) {
        GrPathCmd cmd = (GrPathCmd)iter.next(pts);
        switch (cmd) {
            case kMove_PathCmd:
                if (!first) {
                    subpathVertCount[subpath] = vert-subpathBase;
                    subpathBase = vert;
                    ++subpath;
                }
                *vert = pts[0];
                vert++;
                break;
            case kLine_PathCmd:
                *vert = pts[1];
                vert++;
                break;
            case kQuadratic_PathCmd: {
                GrPathUtils::generateQuadraticPoints(pts[0], pts[1], pts[2],
                                                     tolSqd, &vert,
                                                     GrPathUtils::quadraticPointCount(pts, tol));
                break;
            }
            case kCubic_PathCmd: {
                GrPathUtils::generateCubicPoints(pts[0], pts[1], pts[2], pts[3],
                                                 tolSqd, &vert,
                                                 GrPathUtils::cubicPointCount(pts, tol));
                break;
            }
            case kClose_PathCmd:
                break;
            case kEnd_PathCmd:
                subpathVertCount[subpath] = vert-subpathBase;
                ++subpath; // this could be only in debug
                goto FINISHED;
        }
        first = false;
    }
FINISHED:
    GrAssert(subpath == subpathCnt);
    GrAssert((vert - base) <= maxPts);

    if (translate) {
        int count = vert - base;
        for (int i = 0; i < count; i++) {
            base[i].offset(translate->fX, translate->fY);
        }
    }

    // if we're stenciling we will follow with a pass that draws
    // a bounding rect to set the color. We're stenciling when
    // passCount > 1.
    const int& boundVertexStart = maxPts;
    GrPoint* boundsVerts = base + boundVertexStart;
    if (lastPassIsBounds) {
        GrRect bounds;
        if (reverse) {
            GrAssert(NULL != target->getRenderTarget());
            // draw over the whole world.
            bounds.setLTRB(0, 0,
                           GrIntToScalar(target->getRenderTarget()->width()),
                           GrIntToScalar(target->getRenderTarget()->height()));
            GrMatrix vmi;
            if (target->getViewInverse(&vmi)) {
                vmi.mapRect(&bounds);
            }
        } else {
            bounds.setBounds((GrPoint*)base, vert - base);
        }
        boundsVerts[0].setRectFan(bounds.fLeft, bounds.fTop, bounds.fRight,
                                  bounds.fBottom);
    }

    for (int p = 0; p < passCount; ++p) {
        target->setDrawFace(drawFace[p]);
        if (NULL != passes[p]) {
            target->setStencil(*passes[p]);
        }

        if (lastPassIsBounds && (p == passCount-1)) {
            if (!colorWritesWereDisabled) {
                target->disableState(GrDrawTarget::kNoColorWrites_StateBit);
            }
            target->drawNonIndexed(kTriangleFan_PrimitiveType,
                                   boundVertexStart, 4);

        } else {
            if (passCount > 1) {
                target->enableState(GrDrawTarget::kNoColorWrites_StateBit);
            }
            int baseVertex = 0;
            for (int sp = 0; sp < subpathCnt; ++sp) {
                target->drawNonIndexed(type,
                                      baseVertex,
                                      subpathVertCount[sp]);
                baseVertex += subpathVertCount[sp];
            }
        }
    }
}

bool GrGpu::setupClipAndFlushState(GrPrimitiveType type) {
    const GrIRect* r = NULL;
    GrIRect clipRect;

    // we check this early because we need a valid
    // render target to setup stencil clipping
    // before even going into flushGraphicsState
    if (NULL == fCurrDrawState.fRenderTarget) {
        GrAssert(!"No render target bound.");
        return false;
    }

    if (fCurrDrawState.fFlagBits & kClip_StateBit) {
        GrRenderTarget& rt = *fCurrDrawState.fRenderTarget;

        GrRect bounds;
        GrRect rtRect;
        rtRect.setLTRB(0, 0,
                       GrIntToScalar(rt.width()), GrIntToScalar(rt.height()));
        if (fClip.hasConservativeBounds()) {
            bounds = fClip.getConservativeBounds();
            bounds.intersectWith(rtRect);
        } else {
            bounds = rtRect;
        }

        bounds.roundOut(&clipRect);
        if  (clipRect.isEmpty()) {
            clipRect.setLTRB(0,0,0,0);
        }
        r = &clipRect;

        fClipState.fClipInStencil = !fClip.isRect() &&
                                    !fClip.isEmpty() &&
                                    !bounds.isEmpty();

        if (fClipState.fClipInStencil &&
            (fClipState.fClipIsDirty ||
             fClip != rt.fLastStencilClip)) {

            rt.fLastStencilClip = fClip;
            // we set the current clip to the bounds so that our recursive
            // draws are scissored to them. We use the copy of the complex clip
            // in the rt to render
            const GrClip& clip = rt.fLastStencilClip;
            fClip.setFromRect(bounds);

            AutoStateRestore asr(this);
            AutoInternalDrawGeomRestore aidgr(this);

            this->setViewMatrix(GrMatrix::I());
            this->eraseStencilClip(clipRect);
            this->flushScissor(NULL);
#if !VISUALIZE_COMPLEX_CLIP
            this->enableState(kNoColorWrites_StateBit);
#else
            this->disableState(kNoColorWrites_StateBit);
#endif
            int count = clip.getElementCount();
            int clipBit = rt.stencilBits();
            clipBit = (1 << (clipBit-1));

            // often we'll see the first two elements of the clip are
            // the full rt size and another element intersected with it.
            // We can skip the first full-size rect and save a big rect draw.
            int firstElement = 0;
            if (clip.getElementCount() > 1 &&
                kRect_ClipType == clip.getElementType(0) &&
                kIntersect_SetOp == clip.getOp(1)&&
                clip.getRect(0).contains(bounds)) {
                firstElement = 1;
            }

            // walk through each clip element and perform its set op
            // with the existing clip.
            for (int c = firstElement; c < count; ++c) {
                GrPathFill fill;
                // enabled at bottom of loop
                this->disableState(kModifyStencilClip_StateBit);

                bool canDrawDirectToClip;
                if (kRect_ClipType == clip.getElementType(c)) {
                    canDrawDirectToClip = true;
                    fill = kEvenOdd_PathFill;
                } else {
                    fill = clip.getPathFill(c);
                    GrPathRenderer* pr = this->getPathRenderer();
                    canDrawDirectToClip = pr->requiresStencilPass(this, clip.getPath(c), fill);
                }

                GrSetOp op = firstElement == c ? kReplace_SetOp : clip.getOp(c);
                int passes;
                GrStencilSettings stencilSettings[GrStencilSettings::kMaxStencilClipPasses];

                canDrawDirectToClip = GrStencilSettings::GetClipPasses(op, canDrawDirectToClip,
                                                                       clipBit, IsFillInverted(fill),
                                                                       &passes, stencilSettings);

                // draw the element to the client stencil bits if necessary
                if (!canDrawDirectToClip) {
//.........这里部分代码省略.........

//.........这里部分代码省略.........
                            passes[1] = &gInvEOColorPass;
                        } else {
                            passes[1] = &gEOColorPass;
                        }
                    }
                    drawFace[0] = drawFace[1] = GrDrawState::kBoth_DrawFace;
                    break;

                case kInverseWinding_GrPathFill:
                    reverse = true;
                    // fallthrough
                case kWinding_GrPathFill:
                    if (fSeparateStencil) {
                        if (fStencilWrapOps) {
                            passes[0] = &gWindStencilSeparateWithWrap;
                        } else {
                            passes[0] = &gWindStencilSeparateNoWrap;
                        }
                        passCount = 2;
                        drawFace[0] = GrDrawState::kBoth_DrawFace;
                    } else {
                        if (fStencilWrapOps) {
                            passes[0] = &gWindSingleStencilWithWrapInc;
                            passes[1] = &gWindSingleStencilWithWrapDec;
                        } else {
                            passes[0] = &gWindSingleStencilNoWrapInc;
                            passes[1] = &gWindSingleStencilNoWrapDec;
                        }
                        // which is cw and which is ccw is arbitrary.
                        drawFace[0] = GrDrawState::kCW_DrawFace;
                        drawFace[1] = GrDrawState::kCCW_DrawFace;
                        passCount = 3;
                    }
                    if (stencilOnly) {
                        lastPassIsBounds = false;
                        --passCount;
                    } else {
                        lastPassIsBounds = true;
                        drawFace[passCount-1] = GrDrawState::kBoth_DrawFace;
                        if (reverse) {
                            passes[passCount-1] = &gInvWindColorPass;
                        } else {
                            passes[passCount-1] = &gWindColorPass;
                        }
                    }
                    break;
                default:
                    GrAssert(!"Unknown path fFill!");
                    return false;
            }
        }
    }

    {
    for (int p = 0; p < passCount; ++p) {
        drawState->setDrawFace(drawFace[p]);
        if (NULL != passes[p]) {
            *drawState->stencil() = *passes[p];
        }

        if (lastPassIsBounds && (p == passCount-1)) {
            if (!colorWritesWereDisabled) {
                drawState->disableState(GrDrawState::kNoColorWrites_StateBit);
            }
            GrRect bounds;
            GrDrawState::AutoDeviceCoordDraw adcd;
            if (reverse) {
                GrAssert(NULL != drawState->getRenderTarget());
                // draw over the whole world.
                bounds.setLTRB(0, 0,
                               GrIntToScalar(drawState->getRenderTarget()->width()),
                               GrIntToScalar(drawState->getRenderTarget()->height()));
                GrMatrix vmi;
                // mapRect through persp matrix may not be correct
                if (!drawState->getViewMatrix().hasPerspective() &&
                    drawState->getViewInverse(&vmi)) {
                    vmi.mapRect(&bounds);
                } else {
                    adcd.set(drawState);
                }
            } else {
                bounds = path.getBounds();
            }
            GrDrawTarget::AutoGeometryPush agp(target);
            target->drawSimpleRect(bounds, NULL);
        } else {
            if (passCount > 1) {
                drawState->enableState(GrDrawState::kNoColorWrites_StateBit);
            }
            if (indexCnt) {
                target->drawIndexed(primType, 0, 0,
                                    vertexCnt, indexCnt);
            } else {
                target->drawNonIndexed(primType, 0, vertexCnt);
            }
        }
    }
    }
    return true;
}

////////////////////////////////////////////////////////////////////////////////
// sort out what kind of clip mask needs to be created: alpha, stencil,
// scissor, or entirely software
bool GrClipMaskManager::createClipMask(GrGpu* gpu, 
                                       const GrClip& clipIn,
                                       ScissoringSettings* scissorSettings) {

    GrAssert(scissorSettings);

    scissorSettings->fEnableScissoring = false;
    fClipMaskInStencil = false;
    fClipMaskInAlpha = false;

    GrDrawState* drawState = gpu->drawState();
    if (!drawState->isClipState()) {
        return true;
    }

    GrRenderTarget* rt = drawState->getRenderTarget();

    // GrDrawTarget should have filtered this for us
    GrAssert(NULL != rt);

#if GR_SW_CLIP
    // If MSAA is enabled we can do everything in the stencil buffer.
    // Otherwise check if we should just create the entire clip mask 
    // in software (this will only happen if the clip mask is anti-aliased
    // and too complex for the gpu to handle in its entirety)
    if (0 == rt->numSamples() && useSWOnlyPath(gpu, clipIn)) {
        // The clip geometry is complex enough that it will be more
        // efficient to create it entirely in software
        GrTexture* result = NULL;
        GrIRect bound;
        if (this->createSoftwareClipMask(gpu, clipIn, &result, &bound)) {
            fClipMaskInAlpha = true;

            setup_drawstate_aaclip(gpu, result, bound);
            return true;
        }

        // if SW clip mask creation fails fall through to the other
        // two possible methods (bottoming out at stencil clipping)
    }
#endif // GR_SW_CLIP

#if GR_AA_CLIP
    // If MSAA is enabled use the (faster) stencil path for AA clipping
    // otherwise the alpha clip mask is our only option
    if (0 == rt->numSamples() && clipIn.requiresAA()) {
        // Since we are going to create a destination texture of the correct
        // size for the mask (rather than being bound by the size of the
        // render target) we aren't going to use scissoring like the stencil
        // path does (see scissorSettings below)
        GrTexture* result = NULL;
        GrIRect bound;
        if (this->createAlphaClipMask(gpu, clipIn, &result, &bound)) {
            fClipMaskInAlpha = true;

            setup_drawstate_aaclip(gpu, result, bound);
            return true;
        }

        // if alpha clip mask creation fails fall through to the stencil
        // buffer method
    }
#endif // GR_AA_CLIP

    // Either a hard (stencil buffer) clip was explicitly requested or 
    // an antialiased clip couldn't be created. In either case, free up
    // the texture in the antialiased mask cache.
    // TODO: this may require more investigation. Ganesh performs a lot of
    // utility draws (e.g., clears, InOrderDrawBuffer playbacks) that hit
    // the stencil buffer path. These may be "incorrectly" clearing the 
    // AA cache.
    fAACache.reset();

    GrRect bounds;
    GrRect rtRect;
    rtRect.setLTRB(0, 0,
                   GrIntToScalar(rt->width()), GrIntToScalar(rt->height()));
    if (clipIn.hasConservativeBounds()) {
        bounds = clipIn.getConservativeBounds();
        if (!bounds.intersect(rtRect)) {
            bounds.setEmpty();
        }
    } else {
        bounds = rtRect;
    }

    bounds.roundOut(&scissorSettings->fScissorRect);
    if  (scissorSettings->fScissorRect.isEmpty()) {
        scissorSettings->fScissorRect.setLTRB(0,0,0,0);
        // TODO: I think we can do an early exit here - after refactoring try:
        //  set fEnableScissoring to true but leave fClipMaskInStencil false
        //  and return - everything is going to be scissored away anyway!
    }
    scissorSettings->fEnableScissoring = true;

    // use the stencil clip if we can't represent the clip as a rectangle.
    fClipMaskInStencil = !clipIn.isRect() && !clipIn.isEmpty() &&
//.........这里部分代码省略.........