Python MobileRestClient.get_replications方法代碼示例

# 需要導入模塊: from keywords.MobileRestClient import MobileRestClient [as 別名]
# 或者: from keywords.MobileRestClient.MobileRestClient import get_replications [as 別名]
def test_replication_with_session_cookie(setup_client_syncgateway_test):
    """Regression test for https://github.com/couchbase/couchbase-lite-android/issues/817
    1. SyncGateway Config with guest disabled = true and One user added (e.g. user1 / 1234)
    2. Create a new session on SGW for the user1 by using POST /_session.
       Capture the SyncGatewaySession cookie from the set-cookie in the response header.
    3. Start continuous push and pull replicator on the LiteServ with SyncGatewaySession cookie.
       Make sure that both replicators start correctly
    4. Delete the session from SGW by sending DELETE /_sessions/ to SGW
    5. Cancel both push and pull replicator on the LiteServ
    6. Repeat step 1 and 2
    """

    ls_db = "ls_db"
    sg_db = "db"

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_url = setup_client_syncgateway_test["sg_url"]
    sg_admin_url = setup_client_syncgateway_test["sg_admin_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_url,
        config="{}/walrus-user.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_replication_with_session_cookie'")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_admin_url: {}".format(sg_admin_url))
    log_info("sg_url: {}".format(sg_url))

    client = MobileRestClient()
    client.create_database(url=ls_url, name=ls_db)

    # Get session header for user_1
    session_header = client.create_session_header(url=sg_url, db=sg_db, name="user_1", password="foo")

    # Get session id from header
    session_parts = re.split("=|;", session_header)
    session_id = session_parts[1]
    log_info("{}: {}".format(session_parts[0], session_id))
    session = (session_parts[0], session_id)

    # Start authenticated push replication
    repl_one = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_url,
        to_db=sg_db,
        to_auth=session_header
    )

    # Start authenticated pull replication
    repl_two = client.start_replication(
        url=ls_url,
        continuous=True,
        from_url=sg_url,
        from_db=sg_db,
        from_auth=session_header,
        to_db=ls_db,
    )

    # Wait for 2 replications to be 'Idle', On .NET they may not be immediately available via _active_tasks
    client.wait_for_replication_status_idle(ls_url, repl_one)
    client.wait_for_replication_status_idle(ls_url, repl_two)

    replications = client.get_replications(ls_url)
    assert len(replications) == 2, "2 replications (push / pull should be running)"

    num_docs_pushed = 100

    # Sanity test docs
    ls_docs = client.add_docs(url=ls_url, db=ls_db, number=num_docs_pushed, id_prefix="ls_doc", channels=["ABC"])
    assert len(ls_docs) == num_docs_pushed

    sg_docs = client.add_docs(url=sg_url, db=sg_db, number=num_docs_pushed, id_prefix="sg_doc", auth=session, channels=["ABC"])
    assert len(sg_docs) == num_docs_pushed

    all_docs = client.merge(ls_docs, sg_docs)
    log_info(all_docs)

    client.verify_docs_present(url=sg_admin_url, db=sg_db, expected_docs=all_docs)
    client.verify_docs_present(url=ls_url, db=ls_db, expected_docs=all_docs)

    # GET from session endpoint /{db}/_session/{session-id}
    session = client.get_session(url=sg_admin_url, db=sg_db, session_id=session_id)
    assert len(session["userCtx"]["channels"]) == 2, "There should be only 2 channels for the user"
    assert "ABC" in session["userCtx"]["channels"], "The channel info should contain 'ABC'"
    assert session["userCtx"]["name"] == "user_1", "The user should have the name 'user_1'"
    assert len(session["authentication_handlers"]) == 2, "There should be 2 authentication_handlers"
    assert "default" in session["authentication_handlers"], "Did not find 'default' in authentication_headers"
    assert "cookie" in session["authentication_handlers"], "Did not find 'cookie' in authentication_headers"

    log_info("SESSIONs: {}".format(session))

    # Delete session via sg admin port and _user rest endpoint
    client.delete_session(url=sg_admin_url, db=sg_db, user_name="user_1", session_id=session_id)

#.........這裏部分代碼省略.........

# 需要導入模塊: from keywords.MobileRestClient import MobileRestClient [as 別名]
# 或者: from keywords.MobileRestClient.MobileRestClient import get_replications [as 別名]
def test_multiple_replications_created_with_unique_properties(setup_client_syncgateway_test):
    """Regression test for couchbase/couchbase-lite-java-core#1386
    1. Setup SGW with a remote database name db for an example
    2. Create a local database such as ls_db
    3. Send POST /_replicate with source = ls_db, target = http://localhost:4985/db, continuous = true
    4. Send POST /_replicate with source = ls_db, target = http://localhost:4985/db, continuous = true, doc_ids=["doc1", "doc2"]
    5. Send POST /_replicate with source = ls_db, target = http://localhost:4985/db, continuous = true, filter="filter1"
    6. Make sure that the session_id from each POST /_replicate are different.
    7. Send GET /_active_tasks to make sure that there are 3 tasks created.
    8. Send 3 POST /_replicate withe the same parameter as Step 3=5 plus cancel=true to stop those replicators
    9. Repeat Step 3 - 8 with source = and target = db for testing the pull replicator.
    """

    sg_db = "db"
    ls_db = "ls_db"

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_one_admin = setup_client_syncgateway_test["sg_admin_url"]
    sg_one_public = setup_client_syncgateway_test["sg_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_one_public,
        config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_multiple_replications_created_with_unique_properties'")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_one_admin: {}".format(sg_one_admin))
    log_info("sg_one_public: {}".format(sg_one_public))

    client = MobileRestClient()
    client.create_database(url=ls_url, name=ls_db)

    ########
    # PUSH #
    ########
    # Start 3 unique push replication requests
    repl_one = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db
    )
    client.wait_for_replication_status_idle(ls_url, repl_one)

    repl_two = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db,
        doc_ids=["doc_1", "doc_2"]
    )
    client.wait_for_replication_status_idle(ls_url, repl_two)

    # Create doc filter and add to the design doc
    filters = {
        "language": "javascript",
        "filters": {
            "sample_filter": "function(doc, req) { if (doc.type && doc.type === \"skip\") { return false; } return true; }"
        }
    }
    client.add_design_doc(url=ls_url, db=ls_db, name="by_type", doc=json.dumps(filters))

    repl_three = client.start_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db,
        repl_filter="by_type/sample_filter"
    )
    client.wait_for_replication_status_idle(ls_url, repl_three)

    # Verify 3 replicaitons are running
    replications = client.get_replications(ls_url)
    log_info(replications)
    assert len(replications) == 3, "Number of replications, Expected: {} Actual: {}".format(
        3,
        len(replications)
    )

    # Stop repl001
    client.stop_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db
    )

    # Stop repl002
    client.stop_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
#.........這裏部分代碼省略.........

# 需要導入模塊: from keywords.MobileRestClient import MobileRestClient [as 別名]
# 或者: from keywords.MobileRestClient.MobileRestClient import get_replications [as 別名]
def test_initial_pull_replication(setup_client_syncgateway_test, continuous):
    """
    1. Prepare sync-gateway to have 10000 documents.
    2. Create a single shot / continuous pull replicator and to pull the docs into a database.
    3. Verify if all of the docs get pulled.
    Referenced issue: couchbase/couchbase-lite-android#955.
    """

    sg_db = "db"
    ls_db = "ls_db"

    num_docs = 10000

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_one_admin = setup_client_syncgateway_test["sg_admin_url"]
    sg_one_public = setup_client_syncgateway_test["sg_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_one_public,
        config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_initial_pull_replication', continuous: {}".format(continuous))
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_one_admin: {}".format(sg_one_admin))
    log_info("sg_one_public: {}".format(sg_one_public))

    client = MobileRestClient()
    client.create_user(sg_one_admin, sg_db, "seth", password="password", channels=["ABC", "NBC"])
    session = client.create_session(sg_one_admin, sg_db, "seth")

    # Create 'num_docs' docs on sync_gateway
    docs = client.add_docs(
        url=sg_one_public,
        db=sg_db,
        number=num_docs,
        id_prefix="seeded_doc",
        generator="four_k",
        auth=session
    )
    assert len(docs) == num_docs

    client.create_database(url=ls_url, name=ls_db)

    # Start oneshot pull replication
    repl_id = client.start_replication(
        url=ls_url,
        continuous=continuous,
        from_url=sg_one_admin,
        from_db=sg_db,
        to_db=ls_db
    )

    start = time.time()

    if continuous:
        log_info("Waiting for replication status 'Idle' for: {}".format(repl_id))
        # Android will report IDLE status, and drop into the 'verify_docs_present' below
        # due to https://github.com/couchbase/couchbase-lite-java-core/issues/1409
        client.wait_for_replication_status_idle(ls_url, repl_id)
    else:
        log_info("Waiting for no replications: {}".format(repl_id))
        client.wait_for_no_replications(ls_url)

    # Verify docs replicated to client
    client.verify_docs_present(url=ls_url, db=ls_db, expected_docs=docs, timeout=240)

    all_docs_replicated_time = time.time() - start
    log_info("Replication took: {}s".format(all_docs_replicated_time))

    # Verify docs show up in client's changes feed
    client.verify_docs_in_changes(url=ls_url, db=ls_db, expected_docs=docs)

    replications = client.get_replications(url=ls_url)

    if continuous:
        assert len(replications) == 1, "There should only be one replication running"
        assert replications[0]["status"] == "Idle", "Replication Status should be 'Idle'"
        assert replications[0]["continuous"], "Running replication should be continuous"
        # Only .NET has an 'error' property
        if "error" in replications[0]:
            assert len(replications[0]["error"]) == 0
    else:
        assert len(replications) == 0, "No replications should be running"

# 需要導入模塊: from keywords.MobileRestClient import MobileRestClient [as 別名]
# 或者: from keywords.MobileRestClient.MobileRestClient import get_replications [as 別名]
def test_multiple_replications_not_created_with_same_properties(setup_client_syncgateway_test):
    """Regression test for https://github.com/couchbase/couchbase-lite-android/issues/939
    1. Create LiteServ database and launch sync_gateway with database
    2. Start 5 continuous push replicators with the same source and target
    3. Make sure the sample replication id is returned
    4. Check that 1 one replication exists in 'active_tasks'
    5. Stop the replication with POST /_replicate cancel=true
    6. Start 5 continuous pull replicators with the same source and target
    7. Make sure the sample replication id is returned
    8. Check that 1 one replication exists in 'active_tasks'
    9. Stop the replication with POST /_replicate cancel=true
    """

    sg_db = "db"
    ls_db = "ls_db"

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_one_admin = setup_client_syncgateway_test["sg_admin_url"]
    sg_one_public = setup_client_syncgateway_test["sg_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_one_public,
        config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_multiple_replications_not_created_with_same_properties'")
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_one_admin: {}".format(sg_one_admin))
    log_info("sg_one_public: {}".format(sg_one_public))

    client = MobileRestClient()
    client.create_database(url=ls_url, name=ls_db)

    repl_id_num = 0
    response_one_id_num = 0
    response_two_id_num = 0

    # launch 50 concurrent push replication requests with the same source / target
    with ThreadPoolExecutor(max_workers=10) as executor:
        futures = [executor.submit(
            client.start_replication,
            url=ls_url,
            continuous=True,
            from_db=ls_db,
            to_url=sg_one_admin,
            to_db=sg_db
        ) for _ in range(50)]

        for future in as_completed(futures):
            response_one_id = future.result()
            # Convert session_id from string "repl001" -> int 1
            response_one_id_num = int(response_one_id.replace("repl", ""))
            log_info(response_one_id_num)

    # Assert that concurrent replications have a greater session id than 0
    assert response_one_id_num > repl_id_num, "'response_one_id_num': {} should be greater than 'repl_id_num': {}".format(
        response_one_id_num,
        repl_id_num
    )

    # Check there is only one replication running
    replications = client.get_replications(ls_url)
    assert len(replications) == 1, "Number of replications, Expected: {} Actual {}".format(
        1,
        len(replications)
    )

    # Stop replication
    client.stop_replication(
        url=ls_url,
        continuous=True,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db
    )

    # Check that no replications are running
    client.wait_for_no_replications(ls_url)
    replications = client.get_replications(ls_url)
    assert len(replications) == 0, "Number of replications, Expected: {} Actual {}".format(
        0,
        len(replications)
    )

    # launch 50 concurrent pull replication requests with the same source / target
    with ThreadPoolExecutor(max_workers=10) as executor:
        futures = [executor.submit(
            client.start_replication,
            url=ls_url,
            continuous=True,
            from_db=sg_db,
            from_url=sg_one_admin,
            to_db=ls_db
        ) for _ in range(50)]

        for future in as_completed(futures):
            response_two_id = future.result()
#.........這裏部分代碼省略.........

# 需要導入模塊: from keywords.MobileRestClient import MobileRestClient [as 別名]
# 或者: from keywords.MobileRestClient.MobileRestClient import get_replications [as 別名]
def test_initial_push_replication(setup_client_syncgateway_test, continuous):
    """
    1. Prepare LiteServ to have 10000 documents.
    2. Create a single shot push / continuous replicator and to push the docs into a sync_gateway database.
    3. Verify if all of the docs get pushed.
    """

    sg_db = "db"
    ls_db = "ls_db"
    seth_channels = ["ABC", "NBC"]

    num_docs = 10000

    cluster_config = setup_client_syncgateway_test["cluster_config"]
    ls_url = setup_client_syncgateway_test["ls_url"]
    sg_one_admin = setup_client_syncgateway_test["sg_admin_url"]
    sg_one_public = setup_client_syncgateway_test["sg_url"]

    sg_helper = SyncGateway()
    sg_helper.start_sync_gateway(
        cluster_config=cluster_config,
        url=sg_one_public,
        config="{}/walrus.json".format(SYNC_GATEWAY_CONFIGS)
    )

    log_info("Running 'test_initial_push_replication', continuous: {}".format(continuous))
    log_info("ls_url: {}".format(ls_url))
    log_info("sg_one_admin: {}".format(sg_one_admin))
    log_info("sg_one_public: {}".format(sg_one_public))

    client = MobileRestClient()
    client.create_user(sg_one_admin, sg_db, "seth", password="password", channels=seth_channels)
    session = client.create_session(sg_one_admin, sg_db, "seth")

    client.create_database(url=ls_url, name=ls_db)

    # Create 'num_docs' docs on LiteServ
    docs = client.add_docs(
        url=ls_url,
        db=ls_db,
        number=num_docs,
        id_prefix="seeded_doc",
        generator="four_k",
        channels=seth_channels
    )
    assert len(docs) == num_docs

    # Start push replication
    repl_id = client.start_replication(
        url=ls_url,
        continuous=continuous,
        from_db=ls_db,
        to_url=sg_one_admin,
        to_db=sg_db
    )

    if continuous:
        log_info("Waiting for replication status 'Idle' for: {}".format(repl_id))
        client.wait_for_replication_status_idle(ls_url, repl_id)
    else:
        log_info("Waiting for no replications: {}".format(repl_id))
        client.wait_for_no_replications(ls_url)

    # Verify docs replicated to sync_gateway
    client.verify_docs_present(url=sg_one_public, db=sg_db, expected_docs=docs, auth=session)

    # Verify docs show up in sync_gateway's changes feed
    client.verify_docs_in_changes(url=sg_one_public, db=sg_db, expected_docs=docs, auth=session)

    replications = client.get_replications(url=ls_url)

    if continuous:
        assert len(replications) == 1, "There should only be one replication running"
        assert replications[0]["status"] == "Idle", "Replication Status should be 'Idle'"
        assert replications[0]["continuous"], "Running replication should be continuous"
        # Only .NET has an 'error' property
        if "error" in replications[0]:
            assert len(replications[0]["error"]) == 0
    else:
        assert len(replications) == 0, "No replications should be running"

# 需要導入模塊: from keywords.MobileRestClient import MobileRestClient [as 別名]
# 或者: from keywords.MobileRestClient.MobileRestClient import get_replications [as 別名]
def test_peer_2_peer_sanity(setup_p2p_test):
    """
    1. Sanity P2P Scenario
    2. Launch LiteServ 1 and LiteServ 2
    3. Create a database on each LiteServ
    4. Start continuous push pull replication from each db to the other
    5. Add docs to each db
    6. Verify the docs show up at each db
    7. Verify the docs show up in the database's changes feed.
    """

    ls_url_one = setup_p2p_test["ls_url_one"]
    ls_url_two = setup_p2p_test["ls_url_two"]

    num_docs_per_db = 1000

    log_info("ls_url_one: {}".format(ls_url_one))
    log_info("ls_url_two: {}".format(ls_url_two))

    client = MobileRestClient()

    log_info("Creating databases")
    ls_db1 = client.create_database(url=ls_url_one, name="ls_db1")
    ls_db2 = client.create_database(url=ls_url_two, name="ls_db2")

    # Setup continuous push / pull replication from LiteServ 1 ls_db1 to LiteServ 2 ls_db2
    repl_one = client.start_replication(
        url=ls_url_one,
        continuous=True,
        from_db=ls_db1,
        to_url=ls_url_two, to_db=ls_db2
    )

    repl_two = client.start_replication(
        url=ls_url_one,
        continuous=True,
        from_url=ls_url_two, from_db=ls_db2,
        to_db=ls_db1
    )

    # Setup continuous push / pull replication from LiteServ 2 ls_db2 to LiteServ 1 ls_db1
    repl_three = client.start_replication(
        url=ls_url_two,
        continuous=True,
        from_db=ls_db2,
        to_url=ls_url_one, to_db=ls_db1
    )

    repl_four = client.start_replication(
        url=ls_url_two,
        continuous=True,
        from_url=ls_url_one, from_db=ls_db1,
        to_db=ls_db2
    )

    client.wait_for_replication_status_idle(url=ls_url_one, replication_id=repl_one)
    client.wait_for_replication_status_idle(url=ls_url_one, replication_id=repl_two)
    client.wait_for_replication_status_idle(url=ls_url_two, replication_id=repl_three)
    client.wait_for_replication_status_idle(url=ls_url_two, replication_id=repl_four)

    ls_url_one_replications = client.get_replications(ls_url_one)
    assert len(ls_url_one_replications) == 2

    ls_url_two_replications = client.get_replications(ls_url_two)
    assert len(ls_url_two_replications) == 2

    ls_db1_docs = client.add_docs(url=ls_url_one, db=ls_db1, number=num_docs_per_db, id_prefix="test_ls_db1")
    assert len(ls_db1_docs) == num_docs_per_db

    ls_db2_docs = client.add_docs(url=ls_url_two, db=ls_db2, number=num_docs_per_db, id_prefix="test_ls_db2")
    assert len(ls_db2_docs) == num_docs_per_db

    all_docs = client.merge(ls_db1_docs, ls_db2_docs)
    assert len(all_docs) == 2000

    client.verify_docs_present(url=ls_url_one, db=ls_db1, expected_docs=all_docs)
    client.verify_docs_present(url=ls_url_two, db=ls_db2, expected_docs=all_docs)

    client.verify_docs_in_changes(url=ls_url_one, db=ls_db1, expected_docs=all_docs)
    client.verify_docs_in_changes(url=ls_url_two, db=ls_db2, expected_docs=all_docs)